Catalogue No. 11 - Tree Climbing Gear – Arbogear

Catalogue No. 11

Your Specialist Retailer:

2 www.ergo-schnitt.de

Images and data may be subject to technical changes.Print June 2017

C o n t e n t sC o n t e n t s

3 Garden shears ES19 pro and ES21 pro 4 Secateurs6 Gripping shears, telescopic shears8 Blade and saw blade cleaner9 Useful aids10 Hedge shears13 Pruning shears16 Hand saws18 Telescopic saws21 Telescopic poles22 Saw blades for telecopic saws23 Pole pruners for telescopic poles24 Telescopic saws accessories26 Telescopic combi-system27 Safety grass cutting blade29 Foldable edge and bark protector30 Ball-bearing mounted sliding base32 Ergo Vert-i-File33 Spare parts

3

Garden shears ES19 pro und ES21 proThe secateurs ES19 pro and ES21 pro are bypass shears of superior quality. The secateurs have an ergonomically designed handle made of forged aluminum. The blades are made of high carbon steel, coated with hard chrome. This guarantees extremely sharp blades with a long lifetime. The upper blade cuts cleanly and smoothly. Thus, it is ensured that the user obtains a precise and clean cutting surface. A high tension spring and the damper complement the high-quality standard of the secateurs as well. Suitable for quality-conscious hobby gardeners, municipalities, gardening and landscaping services, fruit and wine growing and forestry. Replacement parts are available of course.

Cleaner

see page 8

Size Weight19 cm 205 gram7.48 in 7.23 oz

ERS190 Secateurs ES19 pro

Ø 20 mm (0.79 in)

ERS7190 Replacement bladeERS7212 Replacement spring

Spare parts

NEWNEW


ERS210 Secateurs ES21 pro

Ø 20 mm (0.79 in)

ERS7210 Replacement bladeERS7212 Replacement spring

Spare parts

NEWNEW


SecateursErgonomic handles with plastic-like coating and rubber shock absorbers for protection of the wrist. The interplay between the blade and the counter blade can be adjusted with a toothed nut accurately and easily.


342 Garden shears 21

Ø 20 mm (0.79 in)

L-342 Replacement blade 2-parts setR-342 Replacement spring

Spare parts



Ø 20 mm (0.79 in)


Spare parts



Ø 20 mm (0.79 in)

L-350 Replacement blade 2-parts SetR-342 Replacement spring

Spare parts

Cleaner

see page 8

5

roll-handle

Secateurs



Ø 20 mm (0.79 in)


Spare parts


368 Roll-handle garden shears 22

Ø 20 mm (0.79 in)


Spare parts

Roll-handle garden shears

With an angled cutting head to extend the lower arm for optimum cutting efficiency. Ergonomic handles with plastic-like coating and rubber shock absorbers for protection of the wrist. The interplay between the blade and the counter blade can be adjusted with a toothed nut accurately and easily.

Cleaner

see page 8

6 www.ergo-schnitt.de 6 www.ergo-schnitt.de

7

Gripping shearsCut and hold. Sharp blade made from hardened stainless steel. The cutting is held firmly to the blade with a holding device. Perfect when cutting roses to protect against thorns.


600 Gripping shears

Ø 10 mm (0.39 in)

R-601 Replacement blade complete with holderM-509 Replacement spring grip

Spare parts

Size Weight130 - 200 cm 910 gram51.18 - 78.74 in 32.10 oz

508 Telescopic shears bypass

Ø 10 mm (0.39 in)

A-509 Replacement blade completeM-509 Replacement spring gripF-508 Connection rod

Spare parts


509 Telescopic shears bypass

Ø 10 mm (0.39 in)

A-509 Replacement blade completeM-509 Replacement spring gripF-509 Connection rod

Spare parts

Teleskopic shears bypass

Shears with telescopic rod made from aluminum. Sharp blade made from hardened stainless steel. Green cuttings can easily be done from the ground on hard to reach places on bushes, shrubs and trees.

Cleaner

see page 8


Telescopic shears with moving headShears with telescopic rod made from aluminum with moving head and turning grip. Sharp blade made from hardened stainless steel. These telescopic shears stand out thanks to their ergonomic adjustment possibility and flexibility. Greenery can be pruned without problem at locations that are hard to access on bushes, shrubs and trees.

Blade and saw blade cleanerA water-based phosphate-free cleaning agent with alkaline properties. Cleaner contains special additives which cut easily through sap and similar substances. Perfect for cleaning and maintenance of saw blades. Equally suitable for other appliances contaminated by natural oils, viscous oils, motor fuels and soot. Do not dilute. Remove any cleaner residues with water.


604 Telescopic shears, moving head

Ø 10 mm (0.39 in)

L-604 Replacement bladeM-509 Replacement spring gripF-604 Connection rod

Spare parts

Content 100 ml 3.33 fl. oz.

ERS3100 Blade and saw blade cleaner


603 Telescopic shears, moving head

Ø 10 mm (0.39 in)

L-604 Replacement bladeM-509 Replacement spring gripF-603 Connection rod

Spare parts

9

High quality leather pocket for the safe storage of your garden shears on your belt or on your pants for instance with useful fastening clips. Suitable for all garden shears.

Weight 135 gram 4.76 oz

Suitable for small, folding hand saws and all garden shears. The tool is stored safely and easily accessible at the same time.


Stainless steel sharpening insert on one side and ceramic whetting insert on the other side. Suitable for all shears and knives.


Thanks to their seamless surface finish these gardening gloves provide an excellent sense of touch. This is an advantage when pulling up weeds or harvesting fruit. The oil and grease repellent plastic coating means these gloves are also suitable for repair work. CE cat. 1


Nützliche Arbeitshelfer

418 Shears and saw pocket

22052 Working gloves, size 10

9080 Combi knife sharpener

Art. 416 Art. 417


416 Shears pocket, leather 417 Shears pocket, leather with clips


11

Hedge shearsThe aluminum tubes with ergonomic slip-proof plastic handles with rubber insert have a high rigidity but are nevertheless light. Robust blades made of SK5 steel. Rubber dampers protect your wrists during work. The ideal shears for maintaining hedges and shrubs.

Tubular profile

With straight stainless steel blade.


2023 Hedge shears 60

With serrated blades made from hardchrome.



With straight stainless steel blade.



Cleaner

see page 8


Hedge shearsRugged nut to set the interplay between the blade and the counter blade, ensuring clean and precise cutting. The ideal shears for maintaining hedges and shrubs.

Serrated blades. Nut for setting the interplay between the blade and the counter blade.



R-2022 Replacement blade

Spare parts

Made from SK5 steel. Nut for setting the interplay between the blade and the counter blade. Ergonomically designed grip with castor for the safe storage of the shears.


20020 Hedge shears mini

R-20020 Replacement blade

Spare parts

Cleaner

see page 8

13 13


Pruning shearsThe aluminum tubes with ergonomic slip-proof plastic handles with rubber insert have a high rigidity but are nevertheless light. Robust blades made of SK5 steel. The ideal shears for maintaining hedges and shrubs.

Tubular profile


7237 Pruning shears 72 anvil

Ø 40 mm (1.57 in)

R-2092 Replacement bladeC-2092 Replacement anvil

Spare parts



Ø 40 mm (1.57 in)

R-2092 Replacement bladeC-2092 Replacement anvil

Spare parts



Ø 40 mm (1.57 in)

R-7236 Replacement bladeB-7236 Screw set

Spare parts


7250 Pruning shears 60 bypass

Ø 40 mm (1.57 in)

R-7252 Replacement bladeC-7252 Anvil blade

Spare parts


7252 Pruning shears 72 bypass

Ø 40 mm (1.57 in)

R-7252 Replacement bladeC-7252 Gegenklinge

Spare parts

Cleaner

see page 8

15

Pruning shearsThe pruning shears convince with innovative cutting technology and a sophisticated design. Forged cutting head construction on a super light triangular tube with ergonomic plastic handles and rubber insert. The cutting head with well-engineered transmission mechanics guarantees a clean cut with little effort.

Detail

Tubular profile

Anvil shears with curved blade.



Ø 45 mm (1.77 in)

R-72081 Replacement bladeC-72081 Replacement anvil incl. screws

Spare parts

Anvil shears with curved blade.



Ø 45 mm (1.77 in)

R-72081 Replacement bladeC-72081 Replacement anvil incl. screws

Spare parts

Cleaner

see page 8


17

ERS270 Hand saw Ergo 270-4 medium, 4 mm (0.16 in) 281 gram Curved, 27 cm (10.63 in) long saw blade (SK4 steel). (8 teeth on 30 mm (1.18 in)) 9.91 oz Rows of teeth are induction hardened.

ERS2703 Hand saw Ergo 270-3 Fine fine, 3 mm (0.12 in ) 281 gram Curved, 27 cm (10.63 in) long saw blade (SK4 steel). (10 teeth on 30 mm (1.18 in)) 9.91 oz Rows of teeth are induction hardened.

With the proven Ergo-Schnitt 390-8 saw blade (SK5 steel) and beechwood hand grip.

Cutting length Tooth width Weight39 cm medium, 4 mm (0.16 in) 385 gram15.35 in (8 teeth on 30 mm (1.18 in)) 13.58 oz

Hand sawsThe hand saws are made of the best SK4 and SK5 Japanese steel. As a result, these saw blades are very elastic. All saw blades have a hard chrome coating, as well as inductively hardened rows of teeth. The saw blades are ground thin to the rear of the blades. Every saw type has special tooth positions in the rows of teeth so that the span is conveyed better out of the cut. Suitable for fresh and soft wood as well as dry hard wood.

ERS7270 Saw blade Ergo 270-4ERS7270F Saw blade Ergo 270-3 Fine

Replacement saw blades

ERSO390-8O Saw blade 390-8 without front cut limiter.

Replacement saw blade

ERS390 Hand saw Mastercut

Item number Item Tooth width Weight

With the proven Ergo-Schnitt 390-8 saw blade (SK5 steel) and an 80 cm (31.5 in) ash handle.

Cutting length Tooth width Weight39 cm medium, 4 mm (0.16 in) 385 gram15.35 in (8 teeth on 30 mm (1.18 in)) 13.58 oz

ERSO390-8 Saw blade with front cut limiter.

Replacement saw blade

ERS800 Maintenance saw 800

Cleaner

see page 8

NEWNEW


19

Telescopic sawsThe Ergo-Schnitt telescopic rods are made from glass fibre braid (GFB) covered with a layer of resin. The material offers 5 x higher resistance against breaking compared with aluminium. No corrosion occurs to the GFB and it is very low wear-and-tear. GFB does not conduct electricity when it is clean and dry. This has been confirmed and certified by an accredited inspection laboratory. Ergo-Schnitt telescopic bars can be steplessly set to any height. A tensile strength of 75 kg is attained via an eccentric lever which can be set with the opposite nut (left-handed thread). The saw blade is made from time-proven Japanese SK5 steel. The rows of teeth are induction hardened and every fifth tooth has a special position so that the dust is removed from the cut more easily. Medium tooth width of 4 mm (0.16 in)(8 teeth on 30 mm (1.18 in)) for universal use in fresh, soft, hard and dry wood. Incl. saw blade protector.

Detail of saw tooth

ERS233 * 1140 147,6 158,30ERS340 * 1630 147,6 123,70ERS490 * 3050 147,6 81,70ERS630 * 4540 147,6 75,40ERS8000 ** 5580 147,6 5,40ERS9600 ** 7400 147,6 0,72* Excerpt from a test report of an accredited laboratory in accordance with DIN EN ISO/IEC 17025.** Excerpt from a test report of an accredited laboratory in accordance with IEC 60060-1:2010 reffering to DIN VDE 0681 part 1: 1986-10, ch. 4.8.2.The complete reports are on hand.

Test reports: Results of the leakage current measurementItem Number Shock amplitude Metering voltage [kV] Leakage current [μA]

ERS233 Telescopic saw 233, 3-piece 1,48 m - 2,63 m 1661 gram 1.62 yd - 2.88 yd 58.59 ozERS340 Telescopic saw 340, 2-piece 2,33 m - 3,78 m 1766 gram 2.55 yd - 4.13 yd 62.29 ozERS490 Telescopic saw, 3-piece 2,33 m - 5,16 m 2570 gram 2.55 yd - 5.64 yd 90.65 ozERS630 Telescopic saw, 4-piece 2,33 m - 6,46 m 3530 gram 2.55 yd - 7.06 yd 124.52 ozERS8000 Telescopic saw 8000, 5-piece 2,38 m - 7,86 m 4405 gram 2.60 yd - 8.60 yd 155.38 ozERS9600 Telescopic saw 9600, 6-piece 2,48 m - 9,63 m 6100 gram 2.71 yd - 10.53 yd 215.17 oz

Item number Article Length Weight

Round, 23 mm (0.90 in). Suitable for yellow Ergo-Schnitt telescopic saws.

Cutting length Weight39 cm 465 gram15.35 in 16.40 oz

ERS390-823 Saw blade with adapter


ERSO390-8 Saw blade 390-8

Cleaner

see page 8


Telescopic sawsThe Ergo-Schnitt telescopic rods captivate by their new kind of interlocking system and by their great stiffness even when set to their maximum height. GFB does not conduct electricity when it is clean and dry. The ideal solution for arborists and for those working while standing on a hoisting platform.

ERS354 Telescopic saw 354 silver, 4-piece 1,63 m - 3,57 m 1651 gram 1.78 yd - 3.90 yd 58.24 ozERS454 Telescopic saw 454 silver, 5-piece 1,73 m - 4,57 m 2138 gram 1.89 yd - 5.00 yd 75.42 oz

Item number Item Length Weight

Cleaner

see page 8

Round, 26 mm (1.02 in). Suitable for grey Ergo-Schnitt telescopic saws.


ERS390-826 Saw blade with adapter



21

Telescopic polesThe Ergo-Schnitt telescopic poles are made from glass fibre braid (GFB) covered with a layer of resin. The material offers 5 x higher resistance against breaking compared with aluminum. No corrosion occurs to the GFB and it is very low wear-and-tear. GFB does not conduct electricity when it is clean and dry. This has been confirmed and certified by an accredited inspection laboratory. Ergo-Schnitt telescopic bars can be steplessly set to any height. A tensile strength of 75 kg is attained via an eccentric lever which can be set with the opposite nut (left-handed thread).

ERS233S Telescopic pole 233, 3-piece 0,95 m - 2,10 m 1071 gram 1.04 yd - 2.30 yd 37.78 ozERS340S Telescopic pole 340, 2-piece 1,80 m - 3,25 m 1176 gram 1.97 yd - 3.55 yd 41.82 ozERS490S Telescopic pole 490, 3-piece 1,80 m - 4,63 m 1980 gram 1.97 yd - 5.06 yd 69.84 ozERS630S Telescopic pole 630, 4-piece 1,80 m - 5,93 m 2940 gram 1.97 yd - 6.49 yd 103.71 ozERS8000S Telescopic pole 8000, 5-piece 1,85 m - 7,33 m 3815 gram 1.97 yd - 8.02 yd 134.57 oz ERS9600S Telescopic pole 9600, 6-piece 1,95 m - 9,10 m 5600 gram 2.02 yd - 9.95 yd 197.53 oz


ERS354S Telescopic pole 354 silver, 4-piece 1,10 m - 3,04 m 1151 gram 1,20 yd - 3,32 yd 40.60 ozERS454S Telescopic pole 454 silver, 5-piece 1,20 m - 4,04 m 1638 gram 1,31 yd - 4,42 yd 57.78 oz


Telescopic polesThe Ergo-Schnitt telescopic poles captivate by their new kind of interlocking system and by their great stiffness even when set to their maximum height. GFB does not conduct electricity when it is clean and dry.


Saw blades for telescopic polesA saw blade with a wide range of attachment options for various telescopic saws with different adapters. The saw blade is made from time-proven Japanese SK5 steel. Saw blade length 390 mm (15.35 in). The rows of teeth are induction hardened and every fifth tooth has a special position so that the dust is removed from the cut more easily. Medium tooth width of 4 mm (0.16 in) (8 teeth on 30 mm (1.18 in)) for universal use in fresh, soft, hard and dry wood.

ERS390-823 Replacement saw blade with adapter 39 cm 465 gram Round, 23 mm (0.90 in). Suitable for 15.35 in 16.40 oz yellow Ergo-Schnitt telescopic saws.ERS390-825 Replacement saw blade with adapter 39 cm 480 gram Round, 25 mm (0.98 in). Suitable for 15.35 in 16.93 oz Oregon, Gardena and Bahco.ERS390-826 Replacement saw blade with adapter 39 cm 475 gram Round, 26 mm (1.02 in). Suitable for 15.35 in 16.76 oz grey Ergo-Schnitt telescopic saws.ERS390-829 Replacement saw blade with adapter 39 cm 470 gram Round, 29 mm (1.14 in). Suitable for 15.35 in 16.58 oz Maintenance saw 800.ERS390-8W Replacement saw blade with adapter, oval 39 cm 470 gram Suitable for Wolf Vario-Stiel. 15.35 in 16.58 ozERS390-8S Replacement saw blade with adapter, oval 39 cm 470 gram Suitable for Silky Hayauchi telescopic saws. 15.35 in 16.58 oz

Item number Item Cutting length Weight

Without front cut limiter. Suitable for hand saw Mastercut.


ERSO390-8O Saw blade 390-8

Cleaner

see page 8



23

With 3-fold leverage. Suitable for yellow Ergo-Schnitt telescopic poles.(ERS233S, ERS340S, ERS490S, ERS630S)


ERS342723 Pole pruner, small 755 gram With 2-fold leverage. Suitable for 26.63 oz yellow Ergo-Schnitt telescopic poles. (ERS233S, ERS340S, ERS490S, ERS630S)

ERS342726 Pole pruner, small 740 gram With 2-fold leverage. Suitable for 26.10 oz grey Ergo-Schnitt telescopic poles. (ERS354S, ERS454S)

Pole prunersHigh-quality, completely hardened, double-edged and precision ground blade. Swaged, fully hardened anvil blade with sap groove, so that the blade does not become sticky. Incl. 5 m (5.47 yd) long cable with grip.

E

E

Ø 30 mm (1.18 in)

Ø 40 mm (1.57 in)

Item number Item Weight

ERS343723 Pole pruner, big

Cleaner

see page 8


Telescopic saws accessories

Suitable for Ergo-Schnitt telescopic saws and Silky Hayauchi telescopic saws.


ERS70080 Screw set rods/adapter

Suitable for telescopic saws and Maintenance saw 800 or. as a case for the Mastercut hand saw. With belt loop on the flip side.


ERS70060 Saw blade protector

Suitable for Ergo-Schnitt telescopic saws and Silky Hayauchi Telescopic saws.


ERS1000 Saw hook

ERS70053 Saw blade adapter, round, 23 mm (0.90 in) 218 gram Suitable for yellow Ergo-Schnitt telescopic poles 7.69 ozERS70052 Saw blade adapter, round, 25 mm (0.98 in) 220 gram Suitable for Oregon, Gardena and Bahco telescopic poles. 7.76 ozERS70051 Saw blade adapter, round, 26 mm (1.02 in) 216 gram Suitable for grey Ergo-Schnitt telescopic saws. 7.62 ozERS70048 Saw blade adapter, round, 29 mm (1.14 in) 200 gram Suitable for Maintenance saw 800 7.05 ozERS70050 Saw blade adapter, oval 220 gram Suitable for Silky Hayauchi telescopic saws and Wolf Vario-Stiel. 7.76 oz


25

Telescopic saws accessories

HookThis hook made of galvanized metal has a claw and is ideally suited for rope win-ched tree felling. Thanks to this tool, attachment of ropes in great heights are easily enabled which helps to save time and also improves safety. Therefore, it is perfect for the professional harvesting of hardwood. This hook is available with the corresponding adapter for the yellow Ergo-Schnitt telescopic poles or without the adapter.

Made of galvanized metal.Suitable for yellow Ergo-Schnitt telescopic poles.


Suitable for yellow Ergo-Schnitt telescopic poles.


ERS102523 Hook with adapter

ERS105023 Hook with adapter

NEWNEW

NEWNEW


ERS1025 Hook without adapter NEWNEW


ERS1050 Hook without adapter NEWNEW


With 4-fold leverage.




Art. 542

Tubular profile

Ø 35 mm (1.38 in)

Ø 35 mm (1.38 in)

Telescopic combi-systemThe combi-system is the ideal solution for cutting work on high hedges and trees. Combinedwith the aluminum telescopic handle, proper and safe tree and shrub care is guaranteed.The oval profile achieves a high level of rigidity under pressure and sideways force. The patented latch for setting the length is very user-friendly. The rapid changeover system means attaching different device-heads is easy.

532 Aluminum telescopic rod 325 1,73 m - 3,25 m 1200 gram 2-piece 1.89 yd - 3.55 yd 42.33 oz538 Aluminum telescopic rod 400 2,10 m - 4,00 m 1400 gram 2-piece 2.30 yd - 4.37 yd 49.38 oz542 Aluminum telescopic rod 500 1,90 m - 5,00 m 2100 gram 3-piece 2.08 yd - 5.47 yd 74.08 oz


With cut limiter.




536 Saw

533 Hedge shears

530 Anvil pole pruner

534 Pole pruner

Cleaner

see page 8

27 27


Safety grass cutting bladeFor cutting (mowing) grass and plant growth with a thickness of up to 25 mm (0.98 in). No strong air currents are created and fine grass cuttings are not blown about, they are just gathered and cut. The 40 cutting teeth with an 11° clearance angle offer a minimal contact surface for any objects that may be lying aroung so that these aren‘t slung away. This has been confirmed by tests by different testing institutes such as the German Agricultural Society (DLG), the German Inspection Agency for Country and Forestry Technology (DPLF) and the German Board for Forestry Technology (KWF). Due to the unique structure of the grass cutting safety blade, the operating energy (rotational speed) can be reduced or increased according to the quantity of the grass to be mowed. This means that weak vegetation = low number of revolutions = lower energy outlay = lower noise levels. With 40 cutters on the rotary, the cutting sequence is very high and the grass is not wound up. Eight stabilisation boreholes prevent material vibrations from occuring in the interior of the cutter bar on contact with stationary objects.

ExternalØ: 255 mm, locating bore: 20 mm (0.78 in)


ExternalØ: 255 mm, locating bore: 25,4 mm (1.00 in)


ERS2554020 Safety grass cutting blade

ERS25540254 Safety grass cutting blade

Maintenance of Safety grass cutting bladeSafety grass cutting blade can be maintained with a standard flat file (double-cut) and our filing device. Easy-made filing due to the rollers. Filing depth is individually adjustable on the back of the device.

Consisting of: Base plate with holder for the vice, retaining ring, wing nut, locating pin, file guide (file jig).


ERS7255 Filing device FS

Cleaner

see page 8

29

Foldable edge and bark protectorFirmly mounted to the pole on the brush cutter and yet flexible. When working in open areas, the protective basket is folded back and secured with a splint. When approaching trees, walls, barriers, street posts for instance, ..., the hoop guard is placed over the cutting blade and also secured with the splint. This means that tools, trees, walls, ... are protected. The foldable edge and bark protection can be attached to brush cutters and/or grass trimmers with a shank diameter of 24 mm - 36 mm (0.94 in - 1.42 in).

ERSK285 Foldable edge and bark protector 285 687 gram Suitable for cutting tools with an external Ø of 24,23 oz 250 mm (9.84 in) and 255 mm (10.00 in).

ERSK330 Foldable edge and bark protector 330 726 gram Suitable for cutting tools with an external Ø of 25,61 oz 300 mm (11.81 in) and 305 mm (12.01 in). Not suitable for shredder blade!


Foldable edge and bark protectorSuitable when using metal tools.

Foldable edge and bark protectorSuitable when using nylon head.

ERSK430 Foldable edge and bark protector 430 787 gram Suitable for nylon heads with a cutting circle diameter 27.61 oz of 420 mm (16.54 in). The cutting edge must be mounted on the shock protection!

ERSK485 Foldable edge and bark protecotr 485 * 820 gram Suitable for nylon heads with a cutting circle diameter 28.92 oz of 480 mm (18.90 in). The cutting edge must be mounted on the shock protection! * Suitable for: Stihl FS260, FS360, FS410, FS460, FS490, FS510, FS560 Husqvarna 135, 336, 345, 535, 543, 545, 553, 555



Ball-bearing mounted sliding baseImproves the handling of the machine during the mowing work. Limits wear and tear to the sliding base due to its ball bearings. Reduces too hard of a contact with the ground by the metal cutting blades - thus increasing the lifetime of the tools. An ideal add-on for the Ergo-Schnitt Safety grass cutting blade and other metal cutting tools.

ERS712175 Ball-bearing mounted sliding base 12 x 1,75 225 gram (7.94 oz)

Suitable forEcho: CKS5810, CLS4600, CLS5800, CLS5810

Husqvarna: 16R (ab 1987), 244, 120L, 125L, 125LD, 125R, 125RB, 125RD, 125RJ, 125RJD, 132L, 132LD, 132R, 132RB, 132RD, 132RL, 140R, 142RB, 152RB, 153R, 165R, 165TX, 18RL (ab 1987), 225L, 225LD, 227R, 22RL (ab 1987), 235FR, 235R II, 235RCAT, 240R, 240RBD, 240RJ, 241R, 241RJ, 244GX, 244R, 244RX, 245RX, 250RX, 252RX, 25R, 25RL (ab 1987), 265RX, 26R, 32L, 333R, 333RJ, 335LS, 335LX, 335RJX, 335RX, 343F, 343FR, 343R, 345FX, 345FXT, 345R, 345RX, 355FRM, 355FX, 355FXT, 355RX, 36R, 39R, 555FX, 555FXT, 555RXT

Jonsered: BC2145, BC2236, BC2255, BC2256, BP2052, BP240C, CC2036, FC2145, FC2145S, FC2145W, FC2255, FC2255W, FC2256, FC2256W, GC2236, GR2032, GR2036, GR32 CAT, GR32D, GR32D CAT, GR36, GR36 CAT, GR41, GR50, MC2255, MC2256, R38, R45, RS30, RS38 (NEWere), RS40, RS45, RS45E, RS51, RS51PRO, RS52

Partner: B180, B250C, B250U, B250V, B265J, B370, B380, B405, B440, B450, B450C, B450G

Suitable forDolmar: MS3300, MS3310, MS4000, MS4010, MS4010K, MS4211, MS4500, MS4510

Stihl: FS160, FS200, FS220, FS220K, FS260, FS260C-E, FS260RC-E, FS280, FS280K, FS300, FS310, FS311, FS350, FS353, FS360, FS360C-E, FS400, FS400-K, FS410, FS410C-E, FS410C-EK, FS410C-EL, FS410C-ELM, FS420, FS450, FS450-K, FS460, FS460C-EM, FS460C-EMK, FS460C-EML, FS480, FS480-K, FS490C-EM, FS490C-EMK, FS490C-EMKW, FS490EML, FS500, FS510C-EM

Solo: 124, 126, 127, 128, 130, 134, 137, 140, 141, 142, 152, 154, FS126, FS128




31

Ball-bearing mounted sliding base

Suitable forHusqvarna: 225E, 225R, 225RD, 225RJ, 227L, 227LD, 227RD, 227RJ, 232L, 232LCAT, 232R, 232RCAT, 232RD, 322C, 322E, 322L, 322RJ, 322T, 323C, 323E, 323EX, 323L, 323LD, 323R, 323RJ, 324LDX, 324LX, 324RX, 325C, 325CX, 325EX, 325L, 325LDX, 325LX, 325RDX, 325RJX, 325RX, 325RXT, 325TJX, 325XT, 326C, 326CX, 326EX, 326L, 326LDX, 326LS, 326LX, 326RX, 327LDX, 327LS, 327LX, 327RDX, 327RJX, 327RX, 32R, 533RS, RD

Jonsered: BP2040C, BP40 Combi, BR400, BR450, GR2026CL, GR2026D, GR2026L, GR26 Combi, GR26D, GR26L, GR3032D, GR3032L, GR32L, GR32L CAT, GR44, GT21, GT22, GT24, GT26D, GT26L, RS44

Partner: 200, 203, 205, B250C, B250V (vor 1987), B323, B325, T250

Solo: 100, 119, 127, 132, 137, 141, 153, 155, 400, 106B, 106BR, 106L, 106LR, 121B, 121L, 129B, 129BTS, 129LTS, 130BR, 130H, 130LR, 130S, FS135, FS136, S100, S400

Alpina: 210, 220

Echo: 140, 190, 200, 230, 300, 302, 310, 360, 400, 402, 500, 501, 2010, 2015, 2090, 2190, 2300, 2455, 2500, 2501, 2502, 2510, 2530, 2655, 3010, 3500, 3800, 4600, 5000, 160AE, 200BE, 2090U, 210AE, 2300U, 2450U, 250EL, 250EU, 2600L, 2600U, 310U, 3150U, 315SL, ARM400A, CLS4600, GT2010, GT2400, RM310, RM380, RM460, RMA2530, SRA2190, SRM140, SRM140A, SRM140D, SRM140DA, SRM1500, SRM1500A, SRM1501, SRM200, SRM200A, SRM200AE, SRM200BE, SRM200CE, SRM200DA, SRM200DB, SRM200DE, SRM2010, SRM2010L, SRM202FA, SRM2090L, SRM2100, SRM2101, SRM210AE, SRM210E, SRM2200, SRM2201, SRM2300L, SRM2301, SRM2400, SRM2410, SRM2450L, SRM2455, SRM250, SRM2500, SRM2501, SRM2501S, SRM2502, SRM250EL, SRM2510, SRM2530, SRM2600L, SRM300, SRM3000, SRM3001, SRM300AE, SRM300AE1, SRM300E, SRM3010, SRM302ADX, SRM302BDX, SRM303E, SRM310, SRM3100, SRM3100S, SRM3110, SRM3150L, SRM3400, SRM3410, SRM343SL, SRM3500, SRM3550, SRM380, SRM3800, SRM400AE, SRM400B, SRM400BE, SRM400E, SRM402DE, SRM4600, SRN200D, SRN200DB, ST160AE

Honda: LT4E, UMK422, UMK422LTE, UMK425E, UMK431E, UMK435E, UMR425, UMR431, UMS425E, UT4E

Dolmar: MS20, MS246.4, MS252, MS252.4C, MS252.4U, MS25C, MS25CS, MS25U, MS25US, MS26, MS290C, MS290U, MS30C, MS3202, MS335.4, MS340, MS352.4C, MS352.4U, MS3OU, MS5250



Suitable forStihl: FR106, FR108, FR130T, FR350, FR410C-E, FR450, FR460TC-EM, FR480, FR480C-F, FR85, FR85T, FS100, FS100R, FS100RX, FS106, FS108, FS110, FS110R, FS111, FS120, FS120R, FS130, FS130R, FS131, FS240, FS240C-E, FS240RC-E, FS250, FS250R, FS260C-E, FS52, FS55, FS55R, FS56, FS56CE, FS56R, FS62, FS66, FS70C-E, FS70RC-E, FS74, FS74R, FS76, FS76R, FS80, FS81, FS85, FS86, FS87, FS88, FS89, FS90, FS91, FS94C-E, FS94RC-E, FS96




Ergo Vert-i-FileTo file the chain, the chainsaw needs to be fixed to the new sharpening device “Ergo Vert-i-File” in a predefined diagonal position. While sharpening in the usual way, the guide bar has been fixed horizontally so far. With the new device “Ergo Vert-i-File” you have to fix the guide bar in an upright position. In this upright but also diagonal position, the cutting faces of the cutters are in a horizontal position.

The result of the horizontal direction of filing will be the expected top-plate filing angle. Sharpening with a horizontally guided round file with top-down pressure is so much easier and prevents well-known incorrect sharpening results.

If sharpened incorrectly the chain cuts crooked. Using the new device, the user is able to see wrongly sharpened cutting faces directly and can correct them immediately.

Application example

For chainsaws with a weight up to 6,5 kg (229.28 oz) and bars with a cutting length from 30 cm to 45 cm (12.81 in to 17.72 in). Filing angle of 30°. Weight 350 gram 12.35 oz

To sharpen unmounted saw chains. Additional accessory for the Ergo Vert-i-File. Filing angle of 30°. Weight 345 gram 12.17 oz

ERS51730 Ergo Vert-i-File

ERS52730 Holder for unmounted saw chains

NEWNEW

NEWNEW

Cleaner

see page 8

33

L-342 Replacement blade 2-parts set 342 4L-343 Replacement blade 2-parts set 343, 368 4, 5L-350 Replacement blade 2-parts set 350 4L-352 Replacement blade 2-parts set 352 5R-342 Replacement spring 342, 343, 350, 352, 368 4, 5

Stocker Secateurs

R-601 Replacement blade cpl. with holder 600, 603, 604 7, 8R-603 Turnable head 603, 604 8A-509 Replacement spring complete 508, 509 7L-604 Replacement spring 603, 604 8M-509 Replacement spring grip 508, 509, 600, 603, 604 7, 8M-510 Replacement grip 508, 509 600, 603, 604 7, 8F-508 Connection rod 508 7F-509 Connection rod 509 7F-603 Connection rod 603 8F-604 Connection rod 604 8

Stocker gripping shears, telescopic shears

R-2022 Replacement blade 2022 12R-20020 Replacement spring 20020 12R-7236 Replacement blade 7236 14B-7236 Screw set 7236, 7237, 7238 14R-2092 Replacement blade 7237, 7238 14C-2092 Replacement anvil 7237, 7238 14P-7252 Replacement buffer 7250, 7252 14C-7252 Anvil blade 7250, 7252 14R-7252 Replacement blade 7250, 7252 14R-72081 Replacement blade 72081, 72101 15C-72081 Replacement anvil incl. screws 72081, 72101 15

Stocker hedge shears, pruning shears

ERS7270 Saw blade Ergo 270-4 ERS270 17ERS7270G Handle ERS270, ERS270F 17ERS7270K Case ERS270, ERS270F 17ERS7270S Handle screw ERS270, ERS270F 17ERS7270F Saw blade Ergo 270-3 ERS270F 17

Ergo-Schnitt hand saws

Item number Item Suitable for item number Page




Spare parts

ERS7190 Replacement blade ERS190 3ERS7191 Anvil blade ERS190 3ERS7212 Replacement Spring ERS190, ERS210 3ERS7213 Lock ERS190, ERS210 3ERS7214 Screws ERS190, ERS210 3ERS7210 Replacement blade ERS210 3ERS7211 Anvil blade ERS210 3

Ergo-Schnitt garden shears ES19 pro and ES21 pro



Spare parts

ERS010 Holding clamp 23/30 ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS020 Holding clamp 30/37 ERS233S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS030 Holding clamp 37/44 ERS630S, ERS8000S, ERS9600S 21ERS035 Holding clamp 44/51 ERS8000S, ERS9600S 21ERS038 Holding clamp 51/58 ERS9600S 21

ERS040 Lock lever ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS050 Screw left-hand thread ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS060 Hexagon nut left-hand thread ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS070 Pin for holding clamp ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS080 Screw M4 Allen ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS090 Lock nut 4 mm ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21

ERS100 Endcap 340 ERS340S 21ERS110 Endcap 233/490 ERS233S, ERS490S 21ERS120 Endcap 630 ERS630S 21ERS125 Endcap 8000 ERS8000S 21ERS128 Endcap 9600 ERS9600S

ERS130 Guide 23 x 15 ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS140 Guide 30 x 15 ERS233S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS150 Guide 37 x 15 ERS630S, ERS8000S, ERS9600S 21ERS160 Guide 44 x 15 ERS8000S, ERS9600S 21ERS170 Guide 51 x 15 ERS9600S 21

ERS23/30 Lock clamp 23/30 complete ERS233S, ERS340S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS30/37 Lock clamp 30/37 complete ERS233S, ERS490S, ERS630S, ERS8000S, ERS9600S 21ERS37/44 Lock clamp 37/44 complete ERS630S, ERS8000S, ERS9600S 21ERS44/51 Lock clamp 44/51 complete ERS8000S, ERS9600S 21ERS51/58 Lock clamp 51/58 complete ERS9600S

ERS233.1 1st tube 233 without small parts ERS233S 21ERS233.2 2nd tube 233 without small parts ERS233S 21ERS233.3 Handhold tube 233 excl. small parts ERS233S 21

ERS340.1 1st tube 340 without small parts ERS340S 21ERS340.2 Handhold tube 340 excl. small parts ERS340S 21

ERS490.1 1st tube 490 without small parts ERS490S 21ERS490.2 2nd tube 490 without small parts ERS490S 21ERS490.3 Handhold tube 490 excl. small parts ERS490S 21

ERS630.1 1st tube 630 without small parts ERS630S 21ERS630.2 2nd tube 630 without small parts ERS630S 21ERS630.3 3rd tube 630 without small parts ERS630S 21ERS630.4 Handhold tube 630 excl. small parts ERS630S 21

ERS8000.1 1st tube 8000 without small parts ERS8000S 21ERS8000.2 2nd tube 8000 without small parts ERS8000S 21ERS8000.3 3rd tube 8000 without small parts ERS8000S 21ERS8000.4 4th tube 8000 without small parts ERS8000S 21ERS8000.5 Handhold tube 8000 excl. small parts ERS8000S 21

Ergo-Schnitt yellow telescopic poles


35

Spare parts

ERSK7285 Hoop guard 285 ERSK285 29ERSK7330 Hoop guard 330 ERSK330 29ERSK7430 Hoop guard 430 ERSK430 29ERSK7485 Hoop guard 485 ERSK485 29ERSK7100 Adapter clamp incl. small parts ERSK285, ERSK330, ERSK430, ERSK485 29ERSK7020 Bush 10 x 1,75 mm for hoop guard ERSK285, ERSK330, ERSK430, ERSK485 29ERSK7030 Cellular rubber for adapter clamp ERSK285, ERSK330, ERSK430, ERSK485 29ERSK7040 Cotter pin with wire rope ERSK285, ERSK330, ERSK430, ERSK485 29ERSK7050 Rupper buffer incl. small parts ERSK285, ERSK330, ERSK430, ERSK485 29

Ergo-Schnitt Foldable edge and bark protector

ERS9600.1 1st tube 9600 without small parts ERS9600S 21ERS9600.2 2nd tube 9600 without small parts ERS9600S 21ERS9600.3 3rd tube 9600 without small parts ERS9600S 21ERS9600.4 4th tube 9600 without small parts ERS9600S 21ERS9600.5 5th tube 9600 without small parts ERS9600S 21ERS9600.6 Handhold tube 9600 excl. small parts ERS9600S 21

Illustrated replacement parts list for all telescopic tubes is available upon request.

Ergo-Schnitt yellow telescopic poles

ERS9229 Endcap 354 ERS354S 21ERS9239 Endcap 454 ERS454S 21

ERS9240 Lock lever 30 ERS354S, ERS454S 21ERS9250 Lock lever 34/38 ERS354S, ERS454S 21ERS9260 Lock lever 42 ERS454S 21

ERS9200 Clamping ring 30 mm ERS354S, ERS454S 21ERS9210 Clamping ring 34 mm ERS354S, ERS454S 21ERS9220 Clamping ring 38 mm ERS354S, ERS454S 21ERS9230 Clamping ring 42 mm ERS454S 21 ERS9243 Screw M3x26 ERS345S, ERS454S 21ERS9246 Lock nut M3 ERS345S, ERS454S 21ERS9253 Screw M4x30 ERS345S, ERS454S 21ERS9256 Lock nut M4 ERS354S, ERS454S 21ERS9263 Screw M5x32 ERS454S 21ERS9266 Lock nut M5 ERS454S 21

ERS354.1 1st tube 354 ERS354S 21ERS354.2 2nd tube 354 with lock ERS354S 21ERS354.3 3rd tube 354 with lock ERS354S 21ERS354.4 Handhold tube 354 incl. small parts ERS354S 21

ERS454.1 1st tube 454 ERS454S 21ERS454.2 2nd tube 454 with lock ERS454S 21ERS454.3 3rd tube 454 with lock ERS454S 21ERS454.4 4th tube 454 with lock ERS454S 21ERS454.5 Handhold tube 454 incl. small parts ERS454S 21

Ergo-Schnitt grey telescopic poles




The company Schmitt GmbH is a family-owned business that was established in 1980 - it was founded by Paul Schmitt. Since 1997 his son Norbert Schmitt has been working in the company and in 2001 he became a member of management. In 1999 the brand name Ergo-Schnitt was born - the result of a product development. Since then, the development of products for demanding users has continuously been worked towards. Ergo-Schnitt products are developed by testing them in the field.

Work-safety and high demands on quality are two firmly established requirements for the development of new products. According to standards, the quality and practical viability of this is constantly tested and confirmed by relevant institutions.

Schmitt GmbH · Seminarstraße 6 · D-97702 Münnerstadt · Telephone +49 (0)9733 9153 · Fax +49 (0)9733 4199 · [email protected] · www.ergo-schnitt.de

ments for the dlity of this is constantly tested

Documents

Catalogue No. 11 - Tree Climbing Gear – Arbogear