Embed Size (px)
Citation preview
1
Sailboatswww.igus.com/boats
Yachts...Boats ...igus® solutions for sports boats and other watercraft
plastics for longer life®...
IG-B23
2
Saltwater-resistant for any weather. Motion plastics products from igus® improve the technology and reduce the costs.
Self-lubricating products from igus® are approved in many maritime applications, even under the toughest environment conditions. Seawater-resistant and rugged for shipbuilding in wind, rain or snow while remaining lightweight and functional in the boat interior.
e-chain systems® guide any cable reliably and safely during electrical movements. iglide® plain bearings and drylin® linear guides use dry operation and move sliding doors, hatches, steering systems, lift systems and all other rotating and swiveling components quietly and completely maintenance-free. Always 100% self-lubricating.
igus® products also appeal as visible parts thanks to their elegant design and availability in many finishes. igus® products have received the iF product design award year after year.
Motion plastics – self-lubricating mobility for boats, yachts and ships.
Either for prototype or production, single component or ready-to-installsystems such as linear modules with motor ... all igus® products offer you the motion plastics advantages:●Self-lubricating for life●Corrosion-resistant●Smooth and silent●Easy, straightforward assembly●Large variety, extensive standard product range●Customized solutions from prototype to production
Our online tools also enable you to reduce process costs. igus® shipped from stock in 24-48 hours! Also visit our industry website.
www.igus.com/boats
Reduce cost ...
Thomas Millerdry-techDivision ManagerTel: 1.888.803.1895Email: [email protected]
Joseph Ciringionee-chain systems®
Division ManagerTel: 1.800.521.2747E-mail: [email protected]
3with motion plastics from igus®
in yachts ...
or motorboats ...
in sailboats ...
improve technology ...
4
1
2
6
5
4
3
Reduce costs, improve technology – such as in ...
igus® solutions ...
Self-tacking jibdrylin® curved profile guidesIndividually curved drylin® linear guides for self- tacking jib.
Roller reefing (jib furler/spinnaker pole)igubal® spherical bearingsSpherical igubal® bearings compensate for angle and tolerance errors in roller reefing (jib furler/spinnaker pole).
Bilge pump iglide® plastic plain bearingsDurable, self-lubricating iglide® plain bearings in a bilge pump.
Bow thruster iglide® PRT slewing ring bearingSelf-lubricating iglide® PRT slewing ring bearings for bow thrusters.
Carriage systems drylin® W profile guideCorrosion-resistant drylin® W profile guides made from 316 (VA) stainless steel for carriage systems.
Kicking strap iglide® bar stockSelf-lubricating customized geometry made from iglide® bar stocks for kicking straps.
5
14
2
3 5
6
7
8
9
10
7
8 910
for sailboats
Jam cleats iglide® plastic plain bearingsMaintenance-free iglide® plain bearings for high edge pressures in jam cleats.
Plain bearing-mounted hatches drylin® WJRM hybrid bearingSmooth drylin® hybrid bearings for hatch movements.
Steering systems iglide® J plastic plain bearingsiglide® J plain bearings for fast and slow movement in the steering gear.
Dodgers and bimini tops drylin® N low profile guidedrylin® N low profile guides for installation spaces of 9-12 mm for dodgers/bimini tops.
6
1
42
3
Reduce costs, improve technology – such as in ...
Powered sun roof (slider) drylin® N low profile guideCorrosion-resistant drylin® N flat guide for guiding powered sun roofs.
Windows drylin® T low profile linear guide systemCompact drylin® T low profile linear guide system for window guide.
Seatingiglide® G300 plastic plain bearingsSelf-lubricating iglide® plastic plain bearings for seat kinematics.
Stepsdrylin® lead screw technologyEfficient and durable dryspin high helix threads for retractable steps.
igus® solutions ...
7
5 6
1
4
2
2
3
56
for yachts
Ramps iglide® MCM plastic plain bearingsInstalled quickly: iglide® clip bearings for ramp movements.
Anchor lockers and anchor winches iglide® Z plastic plain bearingsFor high edge pressures in anchor lockers and winches.
8
1
2 5
63
4
Reduce costs, improve technology – such as in ...
Spring-mounted seating systems drylin® W profile guide, E2 micro e-chain®
Electrical seat adjustment with drylin® W profile guide and E2 micro e-chain®.
Valves (EGR and turbocharger) iglide® plastic plain bearingsOil and temperature-resistant iglide® plain bearings for valves (EGR and turbocharger).
Gear actuatorsiglide® plastic plain bearingsMedium-resistant and shock-absorbing iglide® plain bearings for gear actuators.
Flap mounting of intake manifoldsiglide® plastic plain bearingsPressure-resistant iglide® plain bearings in flap mounting of intake manifolds.
Gearboxesigubal® coupling barsNoise-reducing igubal® coupling links for gearboxes with variable bearing distances.
Steering systemigubal® spherical bearingsSelf-lubricating, tolerance-compensating igubal® spherical bearings in steering systems.
igus® solutions ...
9
7 8
1
4
2
35
6
8
7
Belt tensioneriglide® plastic plain bearingsVibration-dampening iglide® plain bearings for belt tensioners.
Trim tabsiglide® plastic bearings, drylin® QLA linear driveSelf-lubricating and pressure-resistant iglide® plain bearings and telescopic drylin® QLA linear drive for trim tabs.
for motor boats
10
1
6
2
3
4
5
Reduce costs, improve technology – such as in ...
Bedsdrylin® N flat guides, drylin® SLW with motordrylin® N low-profile rail for manual bed retraction, drylin® SLW linear module for electrical retraction.
Windowsdrylin® T low profile linear guide systemCompact drylin® T low profile linear guide system for window adjustment.
Doorsiglide® plastic plain bearingsShock-absorbing, durable, self-lubricating iglide® plain bearings for door hinges.
Chairs and tablese-chains® ZFReliable electrical seat adjustment with e-chain® ZF.
Wash basins e-chains®
Electrical height adjustment of wash basins with e-chain® E-Z chain®.
Lift bed systemsdrylin® W profile guidedrylin® W profile guides for guiding lift bed systems.
igus® solutions ...
11
7
8
1
44
2
9
93
6
78
5
Wardrobe doors and pull-outsiglide® plastic plain bearingsOpen or move wardrobe doors quietly with shock dampening using iglide® plain bearings.
TV lift systemsdrylin® SLW (also available with motor)Monitor adjustment with a push of a button with drylin® linear axes and motor.
Shower wallsdrylin® WJRM hybrid bearingsSlide shower walls easily with drylin® W hybrid bearings with an integrated roller.
for the interior ...
12
Maintenance-free even underwateriglide® plain bearings … a selection of the 50 materials
iglide® T500 –The high-tech problem solver
● For operating temperatures of -148°F to +482°F in continuous operation
● Excellent chemical resistance● High compressive strength● Very low moisture absorption● Excellent wear-resistance through the entire
temperature range
iglide® G300 – The general purpose bearing
● Maintenance-free dry operation● High abrasion resistance● Resistance to dust and dirt● More than 650 sizes
iglide® P – low-cost and maintenance-free
● Low water absorption● High load capacity● Low-cost● Low wear rates
iglide® J200 – for anodized aluminum
● Very long service life with hard anodized aluminum
● Low coefficients of friction● Low wear● For low to medium loads
iglide® H2 – cost effective high-temperature bearing up to 392°F
● Underwater use● Low-cost● Chemical-resistant● For high temperatures
iglide® J – the fast-and-slow-motion specialist
● Low wear against different shaft materials● Low friction coefficients in dry operation● Vibration dampening● High chemical resistance● Best performance with soft shaft materials● Low moisture absorption
13
iglide® plain bearings … a selection of the 50 materials
drylin® R shaft guide Corrosion-resistant linear adapters made from 303 stain-less steel (1.4305). Dimension equal to ball bearings.
iglide® PRT slewing ring bearings This PRT slewing ring bearing can be used up to +356°F and is resistant to chemicals and wear.
drylin® SLW-ES lead screw module The compact stainless steel variants of the lead screw linear modules are used in harsh environments.
drylin® W stainless steel guide
Self-lubricating and maintenance-free drylin® liners
corrosion-free ... ready-to-install
Specially designed material combinations made from stainless steel and maintenance-free Tribo-plastics.
● All stainless steel components are 100% corrosion-resistant
● Use of 316 (1.4571) and 304 (1.4301) stainless steel
● Resistant against saltwater and harsh chemicals● Ready-to-install solutions from stock● Sliding elements made from iglide® J plastic
plain bearings
100% self-lubricating due
to tribo-plastics
Available as single and double rail
Corrosion-resistant with the use of V4A
(AISI 316Ti) and 1.4408 (AISI 316)
stainless steel
14
igus® motion plastics products are, for example:failsafe in shipyards ...
Reliable and resistant ...
Shipyard
Eight gantry cranes connected in series travel a total length of 590 ft. (180 m). Both the longitudinal and transverse travel are supplied by igus® e-chains® from the E4/4 range. The compact design of the e-chain® and guide trough allows the system to integrate seamlessly into the crane beam, leaving no cable loops hanging in the working area or field of view.
15
... or on ships, such as:Anchor handling tugs
also in maritime applications
Anchor handling and transport tugs with igus® e-chains®
Due to the special construction of the e-chains® from the 5050C series, with RBR (reverse bend radius), the A-Frame can pivot in the bow or stern direction.The system was installed and commissioned in 2008 and continues to run flawlessly.
16
igus® services ...
Visit our industry web pages for more information, products, application examples and useful online tools.
www.igus.com/boats
Different industries need different solutions. No matter your industry igus® offers customized support for special applications. igus® has more than 50 years of experience and specialized resources in many industries.
www.igus.com/industries
For any task – in any quantity
Quickly find products online, configure them and calculate their service life.With our igus® product finder, quickly find the right product and calculate the estimated service life of igus® products in your application. www.igus.com/online
17
RoHS
fast and reliable.The igus® delivery service More than 97% of components from the igus® catalog are available from stock. �More than 100,000 products from stock �No minimum order quantity�No minimum order price�No cutting charges for cables�No packaging costs
Modern and economic molding technologyigus® utilizes high tech, cost-effective solutions. Modern injection molding technology allows thousands of standard and countless custom components to be manufactured with high precision and quality.
igus® motion plastics
One vision has been driving us for more than 50 years – motion plastics: innovative moving parts made of plastic that cost less and last longer. Our core technology consists of – high-performance plastics which have been optimized for friction and wear. This technology has made us into a world-wide leader for developing and manufacturing energy supply systems and plain bearings.
The igus® labThe massive igus® lab (29,600 ft2) conducts more than two billion test cycles per year on more than 100 test rigs.�Extensive test databases�Customized tests on request
www.igus.com/test
18
igus® contacts ...
19
worldwide
9001:2008igus® is certified in accordance with ISO 9001:2008 and ISO/TS 16949:2009 in the field of energy supply systems, cables and harnessing, as well as plastic bearings.
igus® Inc.PO Box 14349East Providence, RI 02914Tel: 800-521-2747Fax: 401-438-7270E-mail: [email protected]
