Upload
vandan
View
220
Download
0
Embed Size (px)
Citation preview
DryLin® W Hybrid Bearings• Simultaneously rolling and sliding bearings
• Single or double roller
• Low driving forces
• For manual adjustment
• Dry operation
• Single bearings and complete carriages
• Quiet operation941
DryLin® W - Hybrid bearings - Advantages
Lifetime calculation, configuration and more ➤ www.igus.com/drylinW-Hybrid942
Combined sliding and rolling for low drive forces
DryLin® hybrid bearings offer a unique self-lubricating combination of plain and rolling bearings. Integrated rollers achieve low drive forces while the sliding effect simultaneously protects against lateral forces. This combination makes DryLin® hybrid bearings ideal for manual adjustments such as machine and safety doors/guards, mobile control panels, and more. The efficiency of the zinc die-cast design also cuts costs. DryLin® hybrid bearings can be used on a variety of hard-anodized aluminum profiles available from the DryLin® W linear construction kit.
� Low driving force required� Smooth operation� Cost effective � Low-profilel Offset and abuse forces are easily absorbed by sliding
elements
Typical application areas:l Machine doors l Control panelsl Manual applicationsl Safety doors/guardsl Camera equipment
Tightening torque for DryLin® connections between metal parts ➤ Page 975
iF product design award 2012DryLin® hybrid carriages
Available from stockDetailed information about delivery time online.
DryLin® W rail made from hard-anodized aluminum
Compact aluminum carriage withDryLin® hybrid bearings assembly
Self-lubricating and quiet operation
Low friction forces with the combination
of rolling and sliding
Liners made from high-performance plastic iglide® J
Can be combined with 11 DryLin® W linear profile rails
Available as a singleor double shaft profile
Robust zinc die-cast housing with single or double plastic rollers
Hybrid bearings from the DryLin® W linear construction kit
9433D-CAD files, prices and delivery time ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Hybrid bearings - Product overview
DryLin® WJRM� Single bearing with single or double plastic rollers� iglide® J sliding bearing with plastic support roller� Can be combined with DryLin® W single and double rails➤ Page 946
Sliding instead of rolling
DryLin® WWR� Complete carriage assembly for lateral adjustments� DryLin® W double rail profiles� Also available as a short, compact carriage for multi-carriage
solution ➤ Page 948
DryLin® WWH� Complete carriage with 4 integrated hybrid bearings� For horizontal installation� Available in 2 sizes, also suitable as a camera slider ➤ Page 949
Suitable DryLin® W rail profiles➤ From page 911
944 Lifetime calculation, configuration and more ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Application examples
DryLin® W hybrid bearings and W profile guide systems used in camera dollies and sliders.
The new DryLin® W hybrid carriage on a sliding door application
This camera slider using DryLin® WJRM hybrid bearings offers extremely smooth performance, as well as guiding vertical movement
Control panel adjustment unit
The smooth, quiet operation and enormous cost advantages are utilized on the door guards of this machine tool using DryLin® Hybrid bearings
9453D-CAD files, prices and delivery time ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Technical data
WJRM-01-10 WJRM-01-16 WJRM-01-20 WJRM-01-10 WJRM-01-16 WJRM-01-20
DryLin® W hybrid bearings type 01The DryLin® W hybrid bearings from the WJRM-01 series are
equipped with a plastic roller and plain bearing liner. Bearing
housings are available in 3 rail diameter sizes, and can be used
with DryLin® W single or double shaft rails. The hybrid bearing
should be installed so that the bearing load is applied in the
rolling direction. Other load directions are possible, but may
create greater friction forces.
DryLin® W hybrid bearings type 21The DryLin® W hybrid bearings in the WJRM-21 series are each
equipped with two bearing plastic rollers at an angle of 70° or
80°. Available in 3 sizes, they can be combined with DryLin® W
single and double shaft rails. The double roller bearings offer a
higher load capacity than the -01 version and helps to reduce the
friction force caused by cantilevered loads.
Forces absorbed by hybrid bearing
Ser
vice
life
(km
)
Ser
vice
life
(km
)
Load in y-direction (N) Load in y-direction (N)
Forces absorbed by hybrid double roller bearing
Installation position WJRM-21-...Installation position WJRM-01-...
C1
C3
A3
G1
C1
C3
A3
G1
K2B
H
A1
G1A3
C3C1
y
Z
K2B
H
A1
G1A3
C3C1
y
Z
0 0
50
100
150
200
250
300
350
50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
Lebe
nsda
uer (
km)
Belastung in y-Richtung (N)
0 0
50
100
150
200
250
300
350
50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
Lebe
nsda
uer (
km)
Belastung in y-Richtung (N)
C1
C3
A3
G1
Installation position 01 Installation position 02
946
DryLin® W hybrid guides
Lifetime calculation, configuration and more ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Hybrid bearings - Product rangeHybrid bearings with a bearing-supported plastic roller
Can be combined with:
WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-...
WJRM-01-10
Part No. Static load
capacity Co
Dynamic load capacity Cz+
at total running distance (km)F · v
10 100 200 max.
[N] [N] [N] [N] [N · m/s]
WJRM-01-1071) 250 250 90 50 50
WJRM-02-10* 250 250 90 50 50
WJRM-01-16 400 400 140 70 80
WJRM-01-20 550 550 200 100 80
Part No. Coefficient of friction in
z-direction
Weight A1 A3 B B2 C1 C3 G1 H K2 for
thread
K3 for
screw
Q1 Q2
[µ] [g]
WJRM-01-10 < 0.1 46 16.5 6.5 26 2.5 35 22 27 18 M6 M5 – –
WJRM-02-10 < 0.1 46 16.5 6.5 26 2.5 35 22 27 18 M6 M5 – –
WJRM-01-16 < 0.1 131 25 9 34.5 5 48 30 33 27 M8 M6 32 28
WJRM-01-20 < 0.1 232 30 9 42.5 6 52 34 38 36 M8 M6 37 37
Technical data and dimensions [mm]
Installation position 02 in installation size ø 10 when using a WJRM-02-10 hybrid bearing
* Installation position 02 requires WJRM-02-10, this cannot be performed with WJRM-01-10
Installation position 01 Installation position 02
C1
WJRM-01-16WJRM-01-20
WJRM-01-10WJRM-01-16WJRM-01-20
C3
A3
G1
B2
K2
A1
HK3
B
Q2
Q1
C1
WJRM-01-16WJRM-01-20
WJRM-01-10WJRM-01-16WJRM-01-20
C3
A3
G1
B2
K2
A1
HK3
B
Q2
Q1
Hyb
rid b
earin
g
With
one
rol
ler
Siz
e 10
Order key
TypeC1
WJRM-01-16WJRM-01-20
WJRM-01-10WJRM-01-16WJRM-01-20
C3
A3
G1
B2
K2
A1
HK3
B
Q2
Q1
DryLin® W hybrid guides
9473D-CAD files, prices and delivery time ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Hybrid bearings - Product rangeHybrid double bearings with angled plastic rollers
Can be combined with:
WS-... WS-..-ES-FG-... WS-... WS-...-ES-FG WSX-...
WJRM-21-20
Hyb
rid b
earin
g
With
tw
o ro
ller
Siz
e
Order key
Type
WJRM-21-10 and WJRM-21-16: 70° angle between the rollers / WJRM-21-20: 80° angle between the rollers
Part No. Static load
capacity Co
Dynamic load capacity Cz+
at total running distance (km)F · v
10 100 200 max.
[N] [N] [N] [N] [N · m/s]
WJRM-21-10 350 350 125 70 50
WJRM-21-16 600 600 210 105 80
WJRM-21-20 840 840 300 150 80
Part No. Coefficient of friction in
z-direction
Weight A1 A3 B C1 C3 G1 HK2 for screw
[µ] [g]
WJRM-21-10 < 0.1 115 16.5 6.5 31 35 22 27 28 M6
WJRM-21-16 < 0.1 250 25 9 44 48 30 32 41 M8
WJRM-21-20 < 0.1 320 30 9 52 52 34 38 49 M8
Technical data and dimensions [mm]
WJRM-21-... optionally available with hand clampSuffix "-HKA"
K2B
H
A1
G1A3
C3C1
y
Z
K2B
H
A1
G1A3
C3C1
y
Z
948
DryLin® W hybrid guides
Lifetime calculation, configuration and more ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Hybrid bearings - Product rangeHybrid carriages – single & double roller bearings for lateral installation
Can be combined with:
WS-... WS-...-ES-FG WSX-...
WWR-21-80 - 01
Inst
alla
tion
size
Order key
C2C
A2 A
K2
H2
H3
WWR-21-80-15
A3
Fs
sysx
Fs
Fs
wx
sx
Fs
sy
H2
H3
WWR-21-80-01
C2C
A2 AA3
K2
Fs
wx
sx
Fs
sy
H2
H3
WWR-21-80-01
C2C
A2 AA3
K2
Load data and dimensions [mm]
Part No. A C A2 C2 K2 H2 A3 H3 sx min. sx max. sy min. sy max.
Width Length ±0.17
WWR-21-80-01 143 90 100 70 M8 54 15 6 -49 +49 -34 +34
WWR-21-80-15 143 150 100 120 M8 54 15 6 -wx/2 +wx/2 -34 +34
Order example: WWH-10-40-10: Assembled hybrid carriage with 4 single roller hybrid bearingsWWR-21-80-01: Assembled single hybrid carriage as a "door opener" with 2 single roller hybrid bearings and 2
double roller hybrid bearings
Dry
Lin®
W
Com
pac
t
Hyb
rid c
arria
ge
Type Dimensions Option
Options01: Carriage, short design15: Complete carriage, long design
DryLin® W hybrid guides
9493D-CAD files, prices and delivery time ➤ www.igus.com/drylinW-Hybrid
DryLin® W - Hybrid bearings - Product range
Can be combined with:
WS-... WS-...-ES-FG WSX-...
Hybrid carriages with 4 bearings for horizontal installation
C2C
A2
A
K2
H2C2
C
A2 A
K2
H2
Dimensions [mm]
Part No. Weight A C A2 C2 K2 H2 Static load capacity
Coy Coz Mox Moy Moz
[kg] ±0.17 [N] [N] [Nm] [Nm] [Nm]
WWH-10-40-10 0.35 58 100 40 80 M5 34 1,000 1,000 20 16 32
WWH-16-60-15 0.96 84 150 60 120 M6 46 1,600 1,600 45 38 77
WWH-20-80-25 2.05 134 250 116 232 M8 57 3,360 3,360 138 640 640
WWH-10-40-10
Dry
Lin®
W
Inst
alla
tion
size
Hyb
rid c
arria
ge
Leng
th o
f car
riage
[mm
]
Order key
Type Dimensions
950 Lifetime calculation, configuration and more ➤ www.igus.com/drylinW-Hybrid
Notes