250
6.00
10.00
10.00
8.10
88.10
24X .53 HOLESFOR ENCLOSURE MOUNTING
128.11
115.58
113.83.88
12.00
4.00
4X 3.0 NPT
30.00
13.00
2.00
13.00
RING #1
RING #65
(6) REMOVABLE ACCESS PANELS W/ LEXAN WINDOWS
(3) THIS SIDE, (3) REVERSE SIDE.
30.00
8X .56
7.50 B.C.
9.00
3.50
30.00
PREVIOUSLY: #8698
UNIT DESCRIPTIVE DATA
RINGS NUMBERED FROM FLANGE END.1.
RINGS #1-4: 800A, 600V, (4) DF STYLE BRUSH SETS, COPPER RINGS W/
(2) 4/0 AWG DLO 2.CABLE CORE LEADS EXTENDING 40 FT. BEYOND MOUNTING
FLANGE. BRUSHES JUMPERED TOGETHER VIA (2) 4/0 AWG DLO CABLES.
RINGS #5-7: 400A, 600V, (2) DF STYLE BRUSH SETS, COPPER RINGS W/
(2) 1 AWG DLO 3.CABLE CORE LEADS EXTENDING 40 FT. BEYOND MOUNTING
FLANGE. BRUSHES JUMPERED TOGETHER VIA (1) 4/0 AWG DLO CABLE.(RING
#7 BRUSHES TO BE GROUNDED TO ENCLOSURE VIA (1) 4/0 AWG DLO
CABLE.)
RINGS #8-46: 15A, 250V, DOUBLE COPPER GRAPHITE BRUSHES, COPPER
ALLOY RINGS, 4.W/ 14 AWG SRML WIRE CORE LEADS EXTENDING 40 FT.
BEYOND MOUNTING FLANGE.
RINGS #47-57: 5A, 250V, DOUBLE SILVER GRAPHITE BRUSHES, SILVER
PLATED RINGS, 5.W/ 16 AWG, 6 CONDUCTOR OVERALL SHIELDED CABLE CORE
LEADS EXTENDING 42 FT. BEYOND LEAD END. SHIELD LEAD GROUNDED TO
CORE BOLT VIA 16 AWG GRN TEW WIRE. (SHIELDED CABLES TO BE RUN DOWN
EXCLUSIVE KIDNEY SLOT WITH NO OTHER LEADS) (ONLY 11 LEADS ARE USED,
CLIP AND TAPE BACK (1) UNUSED LEAD)
RINGS #58-59: 15A, 250V, DOUBLE COPPER GRAPHITE BRUSHES, COPPER
ALLOY 6.RINGS, W/ 14 AWG SRML WIRE CORE LEADS EXTENDING 40 FT.
BEYOND MOUNTING FLANGE.
RINGS #60-65: 300A, 4.16KV, (2) DF STYLE BRUSH SETS, COPPER
RINGS W/ 4/0 TYPE 7.MV-105 WIRE CORE LEAD EXTENDING 40 FT. BEYOND
MOUNTING FLANGE.
MIDDLE SUPPORTS & CROSS TALK SHIELDS BETWEEN RINGS #7 &
8, #24 & 25, #46 & 47 8.(CROSS TALKS SHIELDS GROUNDED TO
ENCLOSURE VIA 16 AWG GRN TEW WIRE).
MIDDLE SUPPORTS BETWEEN RINGS #61 & 62, #62 & 63, #63
& 64.9.
ENCLOSURE: HEAVY DUTY WELDED STEEL CONSTRUCTION WITH MARINE DUTY
10.WHITE EPOXY PAINT, STAINLESS STEEL FASTENERS. NEMA 12.
EQUIPPED WITH (2) 400W, 115V FAN DRIVEN HEATERS W/ ADJUSTABLE
THERMOSTAT 11.GROUNDED TO ENCLOSURE VIA 14 AWG TEW WIRE.
HIGH VOLTAGE WARNING SIGNS ON ALL REMOVABLE ACCESS
PANELS.12.
ENCLOSURE TO CARRY THE WEIGHT OF THE UNIT WITH THE SHAFT/FLANGE
TO BE 13.USED ONLY TO DRIVE THE SLIP RING CORE. UNIT TO BE MOUNTED
WITH THE SHAFT/FLANGE IN THE UP POSITION. XA-SE100582CAD S
YS
TEM
: SO
LID
WO
RK
S
01/26/1999
D SAMPSONS WEAVER08/07/201254323
ER APPR:
ER DATE:
ER ENGR:
ER NO.
RELEASEDSTATUS:
01/26/1999
This drawing and the information shown constitute trade secret
and confidential property of Conductix, Inc. It is subject to
recall, and is loaned for use only in connection with the
authorized manufacture or installation of Conductix, Inc. products,
and on the condition that it will be treated as confidential and
will not be disclosed, published or reproduced in whole or in part,
or permitted to be viewed or used by any other party, without
specific written permission. Receipt and use of the drawing and
information constitutes acceptance and agreement to the above.
MINIMUM MACHINED SURFACE
5
10102 F StreetOmaha, NE 68127800-521-4888
PROPRIETARY AND CONFIDENTIALINTERPRET GEOMETRIC TOLERANCING PER:
ASME Y14.5-1994 UNLESS OTHERWISE SPECIFIED PRIMARY UNITS ARE IN
INCH POUND SECONDS SECONDARY UNITS IN MILLIMETERS KILOGRAMS
SECONDSTOLERANCES ARE AS FOLLOWSDECIMAL= X.X 0.1 IN [2,5 MM]X.XX
0.03 IN [0,8 MM]X.XXX 0.010 [0,25 MM]ANG. 1FRAC. 1/16THREAD CLASS:
2
DRAWN:
APPR:
DESCRIPTION:
SIZE B
MATERIAL NO. 2: REV
SCALE: 1:16
D SALAZAR
S RETZLAFF
SLIP RING RHD-M4L3X1B17X1B22X1A11B2J6-SP
SHEET 1 OF 2WEIGHT(REF): 1439.14 LBMAT'L:
250
29 2
4
15
1
12
6
16
31
3536
19
34
3
334
20
24
179
29
1
10
18
8 5
21
13
25
14
26
11 6 38 39 22
33
16
6
12
1
15
2
4
29
30
27
37
9 28 23
5
43 XA-07576 WIRE 16AWG TEW GRN 19 STRAND 12.0 FT42 XA-07577 WIRE
14AWG TEW GRN 19BC 105C 600V 1.0 FT41 XA-540826 WINDOW LEXAN 35 X
19 2 PC40 XA-540829 WINDOW LEXAN 27 X 19 4 PC39 XA-10223 WASHER 3/8
LK SST 74 PC38 XA-09791Z WASHER 3/8 FL SST 74 PC37 XA-09607Z WASHER
3/8 FL BRS 1 PC36 XA-09895 WASHER 1/2 LK SST 12 PC35 XA-10903
WASHER 1/2 FL SAE SST 12 PC34 XA-08947 WASHER 1/4 BELL SST 328 PC33
XA-SE100582B SLIP RING RHD-M4L3X1B17X1B22X1A11B2-SPEC 1 PC32
XA-SE100582A SLIP RING 4.0B 4.16KV 300A HV 1 PC31 XA-41829 SHAFT
WLDMT HV STL MDWHT 1 PC30 XA-41828 SHAFT HV MDWHT 1 PC29 XA-100726
SEAL NATIONAL 415683 6.0 X 7.0 X .50 3 PC28 XA-09622 SCREW 10-24 X
.50 RHS PS 3 PC27 XA-10118 SCREW 1/2-13 X .75 CP KNRL BP 4 PC26
XA-540825 PANEL REMOVABLE 39 X 23 W/ WDO MDWHT 2 PC25 XA-540828
PANEL REMOVABLE 31 X 23 W/ WDO MDWHT 4 PC24 XA-104153 NUT 10-32
KEPS SST 8 PC23 XA-08386 NUT 10-24 KEPS 3 PC22 XA-10222 NUT 3/8-16
HEX SST 74 PC21 XA-10003 NUT 3/8-16 HEX BRS 1 PC20 XA-10210 NUT
1/4-20 HEX SST 70200CAB16 164 PC19 XA-09896 NUT 1/2-13 HEX SST 12
PC18 XA-ST8 HUB 3.0 NPT MEYERS 4 PC17 XA-537280 HEATER HOFFMAN
DAH4001B 400W 115V 2 PC16 XA-540818 GASKET END CAP 2 PC15 XA-40978
GASKET BRG HSG 6.0B 2 PC14 XA-540827 GASKET 39 X 23 2 PC13
XA-540830 GASKET 31 X 23 4 PC12 XA-540813 END CAP REMOVABLE 30 X 30
MDWHT 2 PC11 XA-540798 ENCLOSURE 29 X 29 X 110 STL MDWHT 1 PC10
XA-540878 COLLAR LOCKING 6.0B X 6.25 OD X 1.31 MDWHT 2 PC9
XA-100389 CABLE LUG WIRE 16-14 GA RING INSUL 8 PC8 XA-04057 CABLE
LUG 4/0 AWG WLD .38 STUD 2 PC7 XA-531246 CABLE 4/0AWG 1C DLO 2KV
4.0 FT6 XA-10234 BOLT 3/8-16 X 1.50 HEX SST 74 PC5 XA-10002 BOLT
3/8-16 X 1.00 HEX BRS 1 PC4 XA-10135 BOLT 1/2-13 X 2.00 HEX SST 12
PC3 XA-09848 BOLT 1/4-20 X 1.00 HEX SST 328 PC2 XA-40975-B BEARING
HSG 6.0B STYLE 5362-1 MDWHT 3 PC1 XA-JU060XPO BEARING BALL XP 6 3
PC
ITEM MATERIAL NO. 2 DESCRIPTION QTY. UNIT
XA-SE100582CAD SY
STE
M: S
OLI
DW
OR
KS
01/26/1999
D SAMPSONS WEAVER08/07/201254323
ER APPR:
ER DATE:
ER ENGR:
ER NO.
RELEASEDSTATUS:
01/26/1999
This drawing and the information shown constitute trade secret
and confidential property of Conductix, Inc. It is subject to
recall, and is loaned for use only in connection with the
authorized manufacture or installation of Conductix, Inc. products,
and on the condition that it will be treated as confidential and
will not be disclosed, published or reproduced in whole or in part,
or permitted to be viewed or used by any other party, without
specific written permission. Receipt and use of the drawing and
information constitutes acceptance and agreement to the above.
MINIMUM MACHINED SURFACE
5
10102 F StreetOmaha, NE 68127800-521-4888
PROPRIETARY AND CONFIDENTIALINTERPRET GEOMETRIC TOLERANCING PER:
ASME Y14.5-1994 UNLESS OTHERWISE SPECIFIED PRIMARY UNITS ARE IN
INCH POUND SECONDS SECONDARY UNITS IN MILLIMETERS KILOGRAMS
SECONDSTOLERANCES ARE AS FOLLOWSDECIMAL= X.X 0.1 IN [2,5 MM]X.XX
0.03 IN [0,8 MM]X.XXX 0.010 [0,25 MM]ANG. 1FRAC. 1/16THREAD CLASS:
2
DRAWN:
APPR:
DESCRIPTION:
SIZE B
MATERIAL NO. 2: REV
SCALE: 1:16
D SALAZAR
S RETZLAFF
SLIP RING RHD-M4L3X1B17X1B22X1A11B2J6-SP
SHEET 2 OF 2WEIGHT(REF): 1439.14 LBMAT'L:
Sheet1Drawing View1Drawing View2Drawing View3
Sheet2Drawing View4
