of 11/11
This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only. Installation manual: Parrot MKi + Parrot CK3100 range TWINGO 2 The brand name RENAULT TWINGO 2 and the RENAULT logo are the property of RENAULT. This document is only valid for the vehicle TWINGO 2® year 2007 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.

RENAULT TWINGO 2 (2007 - 2011) - MKi + CK (EN_US).pdf

  • View
    231

  • Download
    5

Embed Size (px)

Text of RENAULT TWINGO 2 (2007 - 2011) - MKi + CK (EN_US).pdf

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Installation manual: Parrot MKi + Parrot CK3100 range

    TWINGO 2

    The brand name RENAULT TWINGO 2 and the RENAULT logo are the property of RENAULT. This document is only valid for the vehicle TWINGO 2 year 2007 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Disassembly 30min

    Mounting kit 45 min

    Reassembly 30min

    Testing 15min

    Total 2h

    YES +IGN

    NO ISO

    N/A UNIKA

    FRONT LOUDSPEAKER TEL mode

    ALL MUSIC mode

    Fitting time (estimated) / Main features

    Tools

    - TORX screwdriver

    - Cutting pliers

    - Crimping pliers

    - Multimeter or Test lamp

    - Wire tie

    - Electrical tape

    -Round male terminal

    Plastic trim removal tools FACOM / BOJO

    FACOM DX-25 kit (n4 tools)

    Accessories required

    "Please contact your wholesaler to purchase accessories."

    Kram ref. Dealer ref.

    CK range 86795 77 11 428 303

    MKi range 84795X795 77 11 428 303

    Photos for illustration purposes

    CK range MKi range

    Updating

    To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at

    www.parrot.com/usa/support/downloads

    http://www.parrot.com/uk/support/downloads

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Disassembly

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Disassembly 1 / 2

    Using the plastic trim tools, unclip the radio surround.

    Insert the removal tools and extract the radio, then disconnect

    it.

    Using the plastic trim tools, unclip the gear lever cover.

    Unscrew screws 1 and 2 then unclip the cover without

    disconnecting it.

    1

    3

    2

    4

    5 6

    Unscrew screws 3 and 4 located above the radio cover.

    Using the plastic trim tools, unclip the left plastic trim panel

    clip.

    1 2

    3 4

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Disassembly 2 / 2

    Using the plastic trim tools, unclip the right plastic trim panel

    clip...

    ...then the cover located under the steering wheel...

    ..then unclip the cover located on the dashboard to the left of

    the speedo...

    ...and unclip the dashboard cover on the driver's side.

    7

    9

    8

    10

    11

    Remove the seal on the drivers side.

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Then pass the cable under the head liner along the windscreen.

    Microphone passage

    Glue the bracket (supplied) to the rear-view mirror cover, after having thoroughly degreased the surface.

    Run the cable replacing the seal on the driver's door.

    Pass the cable into the dashboard from the left.

    1

    3

    2

    4

    5

    To finish, run and attach the cable with the cable clips under

    the dashboard.

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Feeding the accessory cable

    Insert the cable in the hole. Unclip the cover located at the bottom left of the glove box.

    Then, using a guide, pass the cable behind the ventilation unit. Attach the cable under the

    steering wheel.

    1

    3

    2

    4

    5

    Fit the cover (supplied) and bring out a sufficient length of cable.

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Fitting the hands-free system 1 / 2

    Connect the adapter to the original connector for the 86795 /7711428303 reverse the red and orange fuses on the kit connector then put the cables together in a bundle, store the junction

    behind the box support and pass the kit connector towards the steering wheel.

    1

    ISO adapter

    2

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Fitting the hands-free system 2 / 2

    Pass the cable by the top of the dashboard behind the rev.

    counter.

    Then bring it out under the steering wheel.

    3 4

    5

    Then glue the mounting on the left dashboard cover after

    carefully decreasing the surface, and clip the cover back in place

    (TAKE CARE not to cut the screen cable).

    !

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Testing

    Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check:

    1 - that the menu is displayed on the screen (language or iPod etc.) 2 - that the radio system is muted when the kit is in use (click in the blue box) 3 - that the sound through all speakers is properly muted 4 - that there is sound through the front speakers for spoken menus 5 - then turn off the ignition, verify that the kit turns off and that the message goodbye is displayed on the screen (otherwise reverse the fuses on the kit power supply harness) 6 - pair a telephone with the kit and make a call (check that both the microphone and the kit are working)

  • TWINGO 2

    This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

    Reassembly

    Refit the system using the following procedure:

    1 - refit the central console of the radio housing

    2 - clip the right and left clips back, pressing them fully home

    3 - screw screws 3 and 4 located on the top

    4 - clip the lower gear lever cover back and replace screws 1 and 2

    5 - refit the gear lever bellows

    6 - reconnect the radio, slide it into its housing and clip back its surround

    7 - clip back the cover under the steering wheel

    8 - clip back the cover on the left of the dashboard