of 16/16
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding. Installation manual: Parrot MKi + Parrot CK3100 range SCENIC 3 The brand name RENAULT SCENIC 3 and the RENAULT logo are the property of RENAULT. This document is only valid for the vehicle model SCENIC 3® year 2009 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.

RENAULT SCENIC 3 (2009 - 2011) MKi + CK (EN_US).pdf

  • View
    222

  • Download
    4

Embed Size (px)

Text of RENAULT SCENIC 3 (2009 - 2011) MKi + CK (EN_US).pdf

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Installation manual: Parrot MKi + Parrot CK3100 range

    SCENIC 3

    The brand name RENAULT SCENIC 3 and the RENAULT logo are the property of RENAULT. This document is only valid for the vehicle model SCENIC 3 year 2009 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly 45min

    Kit installation 45min

    Refitting 45min

    Testing 15min

    Total 2h30min

    NO ACC wire

    NO ISO

    N/A UNIKA

    FRONT SPEAKER TEL mode

    ALL MUSIC mode

    Fitting time (estimated) / Main features

    Tools

    Plastic trim removal tools FACOM / BERNER

    FACOM DX-25 kit (n4 tools)

    Accessories required

    "Please contact your Wholesalers to purchase accessories."

    Kram ref. Dealer ref.

    CK range 86795 77 11 428 303

    MKi range 84795X795 77 11 428 303

    Photos not contractually binding

    Updating

    - TORX screwdriver

    - Cutting pliers

    - Crimping pliers

    - Multimeter or pilot lamp

    - Hose clamp

    - Electrical tape

    - Round male terminals

    CK range MKi range

    To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at

    www.parrot.com/usa/support/downloads

    http://www.parrot.com/uk/support/downloads

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly 1 / 4

    Using the plastic trim tools, unclip the car stereo surround.

    Insert the removal tools into the slots on each side of the radio.

    Unclip the radio, pull it up carefully, then remove the trim

    tools.

    Pull and lift the radio, disconnecting the connector and

    the antenna.

    1

    3

    2

    4

    5 6

    Using the plastic trim tools, unclip the cover above the glove

    box.

    Using the plastic trim tools, unclip the cover located on the

    right side of the dashboard.

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly 2 / 4

    Disconnect the connector for the passenger airbag trigger.

    Unscrew screw 1 from the glove box.

    Unscrew screw 2 from the glove box.

    Unscrew screws 3, 4, 5 and 6 located above the glove box.

    7

    9

    8

    10

    11 12

    Pull the glove box firmly to unclip it and remove it, unplugging the

    light connector.

    Using the plastic trim tools, unclip the central screen

    surround.

    1

    2

    3

    4

    5 6

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly 3 / 4

    Disconnect and release the cover. Remove the fuse box cover.

    Using the plastic trim tools, unclip the headlight adjuster and

    disconnect it.

    Using the plastic trim tools, unclip the cover on the left side of the

    dashboard underneath the air vent and the side.

    13

    15

    14

    16

    17 18

    Unscrew screw 7. Unscrew screw 8.

    7 8

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Disassembly 4 / 4

    Pull firmly to unclip the cover under the steering wheel and

    put it on the floor. Do not remove the bottom.

    Remove the door seal on the drivers side.

    19 20

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    On this same black connector, remove the small YELLOW wire on

    the bottom row.

    Finding an ACC wire

    Under the steering wheel, just under the fuse box, remove the

    large black connector.

    Using a jumper or splice, connect a wire.

    Pass the wire under the steering wheel towards the radio

    housing.

    1

    3

    2

    4

    5 6

    Cut the red wire between the fuse holder and the ISO connector

    provided. (Disconnect the blue wire in front of the fuse on connector

    84795X795.)

    Swap the fuse holders (i.e. the red and orange wires) and connect the

    ACC wire. (Connect the wire directly to connector 84795X795.)

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Pass the cable inside the rain sensor cover towards the cabin light.

    Microphone feeding 1 / 2

    Using the plastic trim tools, unclip the rain sensor cover.

    Glue the support provided onto the cover after cleaning it, connecting the rain sensor.

    Using the plastic trim tools, run the cable through the headliner towards the windscreen post on the drivers

    side.

    1

    3

    2

    4

    5 6

    Run the cable replacing the seal on the driver's door.

    Pass the cable into the dashboard on the left side.

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Microphone feeding 2 / 2

    Run the cable under the dashboard towards the glove box

    housing, attaching it with wire ties.

    7

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Feeding the accessory cable

    On the bottom of the glove box, attach the cable to the bar

    located above the light hole.

    1

    Bring it out leaving sufficient length.

    2

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Fitting the hands-free system 1 / 3

    Connect the adaptor to the original connector, then pass the connector towards the glove box,

    attaching it using wire ties in the glove box housing under the dashboard. Then connect all

    of the cables to the blue box as shown in the diagram below. Test everything before

    reassembly then slide all the cables behind the glove box and attach them with wire ties .

    1

    ISO adapter

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Fitting the hands-free system 2 / 3

    Remove the rubber covers. On the central screen surround.

    Feed the cable from the screen through the central hole.

    Stick the support (supplied) after cleaning, on the left side near to the

    central screen hole and reposition the rubber cover.

    1

    3

    2

    4

    5 6

    Position the kit screen. Feed the cable from the top of the dashboard towards the glove box.

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Fitting the hands-free system 2 / 3

    Clip the central screen surround back on, reconnecting the screen.

    7

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Testing

    Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob

    of the remote control, check:

    1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click in the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition, check that the kit switches off and that the "goodbye" message appears on the screen. (If this fails, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit to make a call. (Check that both the microphone and the kit are working.)

  • SCENIC 3

    This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved Copyright 2011 PARROT SA, a French Socit Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.

    Reassembly

    Refit the system using the following procedure: 1 Re-install the radio reconnecting the adapter and antenna. 2 - Replace the car stereo surround. 3 - Clip the glove box back in place by pushing hard. (BE CAREFUL with the accessory cable.) 4 - Replace screws 1, 2, 3, 4, 5 and 6 in the glove box. 5 Re-connect the passenger airbag selector. 6 Re-fit the right dashboard panel. 7 - Replace the cover above the glove box. 8 Re-fit the panel under the steering wheel by pushing hard. 9 - Replace screws 7 and 8. 10 Re-connect and replace the headlight adjuster. 11 Re-fit the panels on the left side of the dashboard.