SHELBOURNE.COM

H E D G E T R I M M E R

20

0/

30

0/

40

0 S

ER

IES

R E Y N O L D ST E C H N I C A L D A T A200/300/400 SERIES

SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS,SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464SHELBOURNE.COM

SHELBOURNE REYNOLDSENGINEERING LTD.

FIN

D U

S:

200/300/400 SERIES AT A GLANCE

CONTROLS:Progressive Cable Control

HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics

Oil Remote Joystick Control

ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break BackHead Float

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

350

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

357

170 litres Standard

StandardOptional

StandardFixed900

StandardStandard

457

170 litres Standard

StandardOptional

N/AFixedFixed

StandardStandard

250

170 litres Standard

StandardOptional

StandardFixed

900

StandardStandard

450

FLAIL HEAD FEATURES:

Twin ‘v’ Belt Head System

1.2m Head

Drive System Flow

Drive System Pressure

Head Angling

Standard

Standard

75 I/min

250 bar

2570

357

Standard

Standard

75 I/min

250 bar

2570

Hydraulic Roller Optional Optional

450

Roller Diameter

Standard

Standard

75 I/min

250 bar

2570

250

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

350

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

Optional

457

101mm

WEIGHTS:Machine Weight inc Head & OilMin Tractor WeightMin Tractor

MOUNTING SYSTEM:3pt Mounting

Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot

Axle Mounting

ACCESSORIES:Road Lights

1080kg3250kg75hp

OptionalOptional

250

Standard

1160kg3500kg80hp

OptionalOptional

357

Standard

1130kg3250kg75hp

OptionalOptional

350

Standard

1190kg3500kg80hp

Optional

Standard

Optional

450

1220kg3500kg85hp

Optional

Standard

Optional

457

5.16mt4.54mt6.04mt4.52mt3.30mt5.02mt2.35mt1.40mt1.20mt

250

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

357

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

350

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

450

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

457

C

F

D

AB

E H

G

I450

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

R E A C HD I M E N S I O N S

A L L D I M E N S I O N S A B O V E W I T H 1 . 2 M T H E A D

450 IN TRANSPORT POSITION 350 IN TRANSPORT POSITION

250

CABLE CONTROLS 3pt STABILIZER

• 50hp HYDRAULICS• ALL MACHINES ARE 5m REACH• 250: FIXED FRAME, NON PARALLEL• 350 & 357: FIXED FRAME, PARALLEL GEOMETRY• 450 & 457: POWER SLEW, PARALLEL GEOMETRY• TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY• STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD• STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL

SPECIFICATION

The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and

strength in mind with similar styling to their HD siblings. Weight has been saved where possible

without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for

the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong

enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom.

THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL

MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR

FARMERS, CONTRACTORS AND COUNCILS.

The machines have been designed and built in house based upon customer feedback from our

larger contractor range of machines.

The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar

fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates

both parallel geometry and a power slew frame.

STANDARD FEATURES

• HYDRAULIC HEAD ROLLER• OIL PROPORTIONAL JOYSTICK CONTROL• ROAD LIGHTING KIT• FLOAT KITS

OPTIONS

PROPORTIONAL JOYSTICK CONTROL

All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all

other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up

and tested at operating temperature and delivered to the dealer ready to go to work.

2 0 0 / 3 0 0 / 4 0 0 0 S E R I E S F E A T U R E S

250, 350 & 357 BREAKBACK HYDRAULIC ROLLER & DRIVE FIXED ROLLER

CABLE CONTROLS 3pt STABILIZER

• 50hp HYDRAULICS• ALL MACHINES ARE 5m REACH• 250: FIXED FRAME, NON PARALLEL• 350 & 357: FIXED FRAME, PARALLEL GEOMETRY• 450 & 457: POWER SLEW, PARALLEL GEOMETRY• TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY• STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD• STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL

SPECIFICATION

The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and

strength in mind with similar styling to their HD siblings. Weight has been saved where possible

without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for

the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong

enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom.

THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL

MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR

FARMERS, CONTRACTORS AND COUNCILS.

The machines have been designed and built in house based upon customer feedback from our

larger contractor range of machines.

The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar

fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates

both parallel geometry and a power slew frame.

STANDARD FEATURES

• HYDRAULIC HEAD ROLLER• OIL PROPORTIONAL JOYSTICK CONTROL• ROAD LIGHTING KIT• FLOAT KITS

OPTIONS

PROPORTIONAL JOYSTICK CONTROL

All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all

other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up

and tested at operating temperature and delivered to the dealer ready to go to work.

2 0 0 / 3 0 0 / 4 0 0 0 S E R I E S F E A T U R E S

250, 350 & 357 BREAKBACK HYDRAULIC ROLLER & DRIVE FIXED ROLLER

CABLE CONTROLS 3pt STABILIZER

• 50hp HYDRAULICS• ALL MACHINES ARE 5m REACH• 250: FIXED FRAME, NON PARALLEL• 350 & 357: FIXED FRAME, PARALLEL GEOMETRY• 450 & 457: POWER SLEW, PARALLEL GEOMETRY• TWIN PUMP HYDRAULICS WITH 170 LITRE OIL TANK CAPACITY• STANDARD 1.2m BELT DRIVE HEAD • STANDARD DOUBLE SKINNED HEAD• STANDARD 4” BOLTED POSITION HEAD ROLLER • STANDARD CABLE CONTROLS WITH EASY FIT ARMREST CONTROL

SPECIFICATION

The 250, 350 and 450 share the same 5m reach booms and have been designed with quality and

strength in mind with similar styling to their HD siblings. Weight has been saved where possible

without sacrificing strength to give a total weight including oil of 1080kg, 1130kg and 1190kg for

the 250, 350 and 450 respectively. Light enough to be compatible with smaller tractors but strong

enough to do a hard days work. The 357 and 457 models feature a 5.7m reach boom.

THE 200/300/400 SERIES MACHINES ARE SOLIDLY BUILT ENTRY LEVEL

MODELS CAPABLE OF CONSISTENT, RELIABLE PERFORMANCE FOR

FARMERS, CONTRACTORS AND COUNCILS.

The machines have been designed and built in house based upon customer feedback from our

larger contractor range of machines.

The 250 features a non parallel arm and fixed side mounted frame, the 350 and 357 uses a similar

fixed side mounted frame but incorporates parallel arm geometry. The 450 and 457 incorporates

both parallel geometry and a power slew frame.

STANDARD FEATURES

• HYDRAULIC HEAD ROLLER• OIL PROPORTIONAL JOYSTICK CONTROL• ROAD LIGHTING KIT• FLOAT KITS

OPTIONS

PROPORTIONAL JOYSTICK CONTROL

All machines are 3 point linkage mounted with the aid of an easy to fit stabiliser frame. As with all

other Shelbourne hedge cutters the 250, 350 and 450 are all fully assembled at the factory, run up

and tested at operating temperature and delivered to the dealer ready to go to work.

2 0 0 / 3 0 0 / 4 0 0 0 S E R I E S F E A T U R E S

250, 350 & 357 BREAKBACK HYDRAULIC ROLLER & DRIVE FIXED ROLLER

SHELBOURNE.COM

H E D G E T R I M M E R

20

0/

30

0/

40

0 S

ER

IES

R E Y N O L D ST E C H N I C A L D A T A200/300/400 SERIES

SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS,SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464SHELBOURNE.COM

SHELBOURNE REYNOLDSENGINEERING LTD.

FIN

D U

S:

200/300/400 SERIES AT A GLANCE

CONTROLS:Progressive Cable Control

HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics

Oil Remote Joystick Control

ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break BackHead Float

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

350

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

357

170 litres Standard

StandardOptional

StandardFixed900

StandardStandard

457

170 litres Standard

StandardOptional

N/AFixedFixed

StandardStandard

250

170 litres Standard

StandardOptional

StandardFixed

900

StandardStandard

450

FLAIL HEAD FEATURES:

Twin ‘v’ Belt Head System

1.2m Head

Drive System Flow

Drive System Pressure

Head Angling

Standard

Standard

75 I/min

250 bar

2570

357

Standard

Standard

75 I/min

250 bar

2570

Hydraulic Roller Optional Optional

450

Roller Diameter

Standard

Standard

75 I/min

250 bar

2570

250

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

350

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

Optional

457

101mm

WEIGHTS:Machine Weight inc Head & OilMin Tractor WeightMin Tractor

MOUNTING SYSTEM:3pt Mounting

Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot

Axle Mounting

ACCESSORIES:Road Lights

1080kg3250kg75hp

OptionalOptional

250

Standard

1160kg3500kg80hp

OptionalOptional

357

Standard

1130kg3250kg75hp

OptionalOptional

350

Standard

1190kg3500kg80hp

Optional

Standard

Optional

450

1220kg3500kg85hp

Optional

Standard

Optional

457

5.16mt4.54mt6.04mt4.52mt3.30mt5.02mt2.35mt1.40mt1.20mt

250

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

357

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

350

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

450

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

457

C

F

D

AB

E H

G

I450

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

R E A C HD I M E N S I O N S

A L L D I M E N S I O N S A B O V E W I T H 1 . 2 M T H E A D

450 IN TRANSPORT POSITION 350 IN TRANSPORT POSITION

250

SHELBOURNE.COM

H E D G E T R I M M E R

20

0/

30

0/

40

0 S

ER

IES

R E Y N O L D ST E C H N I C A L D A T A200/300/400 SERIES

SHEPHERDS GROVE, STANTON, BURY ST EDMUNDS,SUFFOLK, IP31 2AR T: 01359 250415 F: 01359 250464SHELBOURNE.COM

SHELBOURNE REYNOLDSENGINEERING LTD.

FIN

D U

S:

200/300/400 SERIES AT A GLANCE

CONTROLS:Progressive Cable Control

HYDRAULICS:Standard Power Oil Capacity Independent Hydraulics

Oil Remote Joystick Control

ARM FEATURES:Parallel Boom Geometry Boom TypeHydraulic SlewArm Break BackHead Float

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

350

170 litres Standard

StandardOptional

StandardFixedFixed

StandardStandard

357

170 litres Standard

StandardOptional

StandardFixed900

StandardStandard

457

170 litres Standard

StandardOptional

N/AFixedFixed

StandardStandard

250

170 litres Standard

StandardOptional

StandardFixed

900

StandardStandard

450

FLAIL HEAD FEATURES:

Twin ‘v’ Belt Head System

1.2m Head

Drive System Flow

Drive System Pressure

Head Angling

Standard

Standard

75 I/min

250 bar

2570

357

Standard

Standard

75 I/min

250 bar

2570

Hydraulic Roller Optional Optional

450

Roller Diameter

Standard

Standard

75 I/min

250 bar

2570

250

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

350

Optional

101mm 101mm

Standard

Standard

75 I/min

250 bar

2570

Optional

457

101mm

WEIGHTS:Machine Weight inc Head & OilMin Tractor WeightMin Tractor

MOUNTING SYSTEM:3pt Mounting

Max Reach (A) Head HorizontalMax Reach (B) Head VerticalMax Height (C) Head VerticalMax Height (D) Head Horizontal Max Reach (E) Head DownwardsMax Reach (F) At 450 UpMin Siding Width (G) To TankMin Siding Width (H) To CentreHeight (I) To Pivot

Axle Mounting

ACCESSORIES:Road Lights

1080kg3250kg75hp

OptionalOptional

250

Standard

1160kg3500kg80hp

OptionalOptional

357

Standard

1130kg3250kg75hp

OptionalOptional

350

Standard

1190kg3500kg80hp

Optional

Standard

Optional

450

1220kg3500kg85hp

Optional

Standard

Optional

457

5.16mt4.54mt6.04mt4.52mt3.30mt5.02mt2.35mt1.40mt1.20mt

250

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

357

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

350

5.16mt4.54mt6.25mt4.52mt3.30mt5.35mt2.35mt1.40mt1.55mt

450

5.84mt5.27mt6.72mt5.28mt4.11mt6.01mt2.35mt1.40mt1.55mt

457

C

F

D

AB

E H

G

I450

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

T E C H N I C A LS P E C I F I C A T I O N S

R E A C HD I M E N S I O N S

A L L D I M E N S I O N S A B O V E W I T H 1 . 2 M T H E A D

450 IN TRANSPORT POSITION 350 IN TRANSPORT POSITION

250