Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
HECO-UNIX-topFloorboard ScrewTHE UNIQUE FLOORING SCREW WITH THE CONTRACTION EFFECT
APPLICATION EXAMPLES
Floor board fastening Glazing bead installation Skirting board fastening
The smaller thread pitch means that the
boards are clamped firmly together
Gap free axial fixing of the timber board
via the HECO-UNIX full thread
The variable pitch of the HECO-UNIX full
thread takes hold
1 2 3
46733-09/2014
HECO-Schrauben GmbH & Co.KGDr.-Kurt-Steim-Straße 28D-78713 SchrambergTel.: +49 (0) 74 22 / 9 89-0Fax: +49 (0) 74 22 / 9 89-200E-mail: [email protected]: www.heco-schrauben.com
The flooring screw with the contraction effect
The HECO-UNIX-top has been speciallydesigned for flooring applications. The fullthread of the HECO-UNIX-top floorboardscrew with its variable thread pitch effectivelypulls boards together. The “clamping effect”of the screws draws the board onto thesubstructure, resulting in a gap-free finish.In addition the thread secures the boardaxially, which prevent the annoying creaking
sound of the boards “jacking effect”.Countersinking of the screw head, can bedone neatly and easily, due to the underhead milling ribs which self-countersink intothe surface without splintering the woodaround the edge of the screw.
There is no need for pre-drilling and theHECO-UNIX-top floorboard screw meetseven the most demanding aesthetic requirements.
PRODUCT CHARACTERISTICS
Raised countersunk head with milling ribs and T-drive
Small head diameter
Cutting ribs
Raised head
HECO-UNIX-top full thread
Contraction effect thanks to the full thread with variable thread pitch
Axial fixing of component
Reduced spreading effect thanks to the patented HECO-TOPIX® tip
THE ADVANTAGES
Raised countersunk head with milling ribs and T-drive
Easy countersinking
Prevents wood from splitting
Visually attractive installations
HECO-UNIX-top full thread
No gaps despite it being a full-threaded screw
No creaking boards thanks to full-threaded fixation
Quick, time-saving insertion without predrilling D x L (mm)
3,5 x 403,5 x 503,5 x 604,0 x 704,5 x 504,5 x 604,5 x 704,5 x 80
RecessT-10T-10T-10T-15T-20T-20T-20T-20
BoxVAR2VAR3VAR2VAR2VAR2VAR2VAR2VAR3
Packing unit (pcs.)500500200200200200200200
Article No.4649546498465004650346506465094651246515
HECO-UNIX-top range: raised countersunk head with milling ribsfull threaded, T-Drive, bright zinc plated, coated
Small raised head with milling ribs
Full thread with variable thread pitch
HECO-TOPIX® tip with milling ribs
Your specialist dealer: