short name: E491*grooved bend 45°, No. E491

StrengThin™ 100 groove profil

for thin wall ss pipe

>victaulic system<

technical product sheet

D s C-E DVGW kg

60,3 2,0 48 für Werkstoff 316L 0,568

76,1 2,0 51 für Werkstoff 316L 0,790

88,9 2,0 54 für Werkstoff 316L 1,000

114,3 2,0 64 für Werkstoff 316L 0,700

139,7 2,0 80 für Werkstoff 316L 1,035

168,3 2,0 95 für Werkstoff 316L 1,500

219,1 3,0 127 für Werkstoff 316L 3,680

273,0 3,0 159 für Werkstoff 316L 6,140

323,9 3,0 191 für Werkstoff 316L 8,670

available material: 304L, 316L

Systems › Victaulic › StrengThin™ 100 › fittings › bend 45°

created 05.04.2022 02:25 1/2

Victaulic® StrengThin™ 100 System

Fittings for Stainless Steel

Maximum Working Pressure• PN 10/16 (the fitting pressure rating is equivalent to the coupling joint pressure rating)

Pipe wall thickness for 16 bar

Size [s] max. [s] min.DN 50/ 60,3 2,7 mm 1,6 mm

DN 65/ 76,1 2,7 mm 1,6 mm

DN 80/ 88,9 2,7 mm 1,6 mm

DN 100/ 114,3 2,7 mm 1,6 mm

DN 125/ 139,7 3,0 mm 2,0 mm

DN 150/ 168,3 3,0 mm 2,0 mm

DN 200/ 219,1 3,7 mm (for 10 bar 2,9 mm) 3,0 mm (for 10 bar 2,0 mm)

DN 250/ 273,0 4,2 mm (for 10 bar 2,9 mm) 3,0 mm (for 10 bar 2,0 mm)

DN 300/ 323,9 4,5 mm (for 10 bar 2,9 mm) 3,0 mm (for 10 bar 2,0 mm)

Material• INVESTMENT CAST: Stainless steel per ASTM A351/A351M, Grade CF8 (304) or Grade CF8M (316)

• WROUGHT: Stainless steel per EN 10088-1 No. 1.4307 (304L) or EN 10088-1 No. 1.4404 (316L)

Design No. E491 45º Elbow• DN 50 - DN 80: Cast

• DN 100 - DN 300: Wrought

created 05.04.2022 02:25 2/2