Upload
khangminh22
View
1
Download
0
Embed Size (px)
Citation preview
Contents
FORMULATED EMULSIFIERS ................................................................................... Page 2
SULFATES ............................................................................................................... Page 6
PHOSPHATE ESTERS................................................................................................ Page 8
SULFONATES............................................................................................................ Page 10
NONIONICS (APE FREE) ........................................................................................... Page 12
NONIONICS ............................................................................................................... Page 14
SPECIALTY MONOMERS ........................................................................................... Page 16
DEFOAMERS ............................................................................................................ Page 20
Solvay Novecare Emulsion Polymerization / 1
Solvay Novecare is the leading global supplier of emulsifiers, specialty monomers and specialty additives to the Emulsion Polymerization Industry.
For more than 40 years, we have been committed to providing leading edge solutions to this industry. Our portfolio has evolved into the most compre-hensive range of products addressing formulation challenges and more importantly enabling customers to create tomorrow’s performance require-ments today.
Solvay Novecare supports customers with a broad range of sustainable solutions and services including products optimized around criteria such as biodegradability, eco-toxicity, VOC content, and percentage of renewable materials.
Our APE-free surfactant portfolio covers all chemistries from nonionics (RHODASURF®), to anionics like alkyl sulfonates (RHODACAL®), alkyl ether sulfates (RHODAPEX®), sulfosuccinates (GEROPON®), phosphate esters (RHODAFAC®) and formulated blends (ABEX®).
Solvay Novecare’s dedicated specialty monomer portfolio (SIPOMER®) brings functionality and boosts binder performance to higher levels. Whether seeking to improve substrate wetting, adhesion to different substrates, emulsion stability or simply demand higher film performance, such as high scrub, stain or water resistance, Solvay has the solution.
Working with Solvayw Extensive portfolio of
products
w Surfactants & Specialty monomers dedicated to Emulsion Polymers manufacturing
w Over 40 years as major supplier to the Emulsion Polymer industry
w Global player with local technical teams to support your developments
Solvay Novecare Emulsion Polymerization
Note: These products are produced at worldwide locations through the Novecare division of Solvay.
Contents
FORMULATED EMULSIFIERS ................................................................................... Page 2
SULFATES ............................................................................................................... Page 6
PHOSPHATE ESTERS................................................................................................ Page 8
SULFONATES............................................................................................................ Page 10
NONIONICS (APE FREE) ........................................................................................... Page 12
NONIONICS ............................................................................................................... Page 14
SPECIALTY MONOMERS ........................................................................................... Page 16
DEFOAMERS ............................................................................................................ Page 20
FDA Status International Inventory Status
Product DescriptionAPE/
APE-FreePhysical
FormSolids
Content (%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
-re
a (K
EC
L)
Jap
an
(MIT
)
Formulated Anionics
ABEX® 18-S Proprietary APE-Free Liquid 35 0.03 48 ● — — ● ● — — — — ● ● ● ● ● ●
ABEX® 23-S Proprietary APE-Free Liquid 60 0.10 40 — — — — — — — — — ● ● ● ● ● ●
ABEX® 26-S Proprietary APE Liquid 33 0.02 55 ● — — ● ● — — — — ● ● ● — ● ●
ABEX® 33-S Proprietary APE Liquid 30 0.12 37 — — — — — — — — — ● ● ● — ● ●
ABEX® JKB Proprietary APE-Free Liquid 30 0.13 40 ● — — ● ● — — RL — ● ● ● ● ● ●
ABEX® VA-50 Proprietary APE Liquid 46 0.17 44 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® 2005 Proprietary APE-Free Liquid 30 — — ● — — ● ● ● — — ● ● ● ● ● ● ●
ABEX® 2020 Proprietary APE-Free Liquid 30 0.01 41 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® 2115-A Proprietary APE-Free Liquid 33 — — ● — — — — — — — — ● ● ● — — —
ABEX® 8018 Proprietary APE-Free Liquid 31 0.05 37 ● — — ● ● — — L — ● ● ● ● ● ●
Formulated Anionics
ABEX® EP-100Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 4 Moles EO
APE Liquid 30 0.03 33 ● ● ● ● ● ● ● ● — ● ● ● ● ● ●
ABEX® EP-110Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 9 Moles EO
APE Liquid 30 0.01 37 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® EP-120Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 30 Moles EO
APE Liquid 30 0.05 42 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® EP-120 NASodium Salt of Sulfated Nonylphenol ethoxylate
APE Liquid 35 ND ND — — — — — — — — — ● ● ● ● ● ●
2 /Surfactants and Specialties
Formulated Emulsifiers
FDA Status International Inventory Status
Product DescriptionAPE/
APE-FreePhysical
FormSolids
Content (%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
-re
a (K
EC
L)
Jap
an
(MIT
)
Formulated Anionics
ABEX® 18-S Proprietary APE-Free Liquid 35 0.03 48 ● — — ● ● — — — — ● ● ● ● ● ●
ABEX® 23-S Proprietary APE-Free Liquid 60 0.10 40 — — — — — — — — — ● ● ● ● ● ●
ABEX® 26-S Proprietary APE Liquid 33 0.02 55 ● — — ● ● — — — — ● ● ● — ● ●
ABEX® 33-S Proprietary APE Liquid 30 0.12 37 — — — — — — — — — ● ● ● — ● ●
ABEX® JKB Proprietary APE-Free Liquid 30 0.13 40 ● — — ● ● — — RL — ● ● ● ● ● ●
ABEX® VA-50 Proprietary APE Liquid 46 0.17 44 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® 2005 Proprietary APE-Free Liquid 30 — — ● — — ● ● ● — — ● ● ● ● ● ● ●
ABEX® 2020 Proprietary APE-Free Liquid 30 0.01 41 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® 2115-A Proprietary APE-Free Liquid 33 — — ● — — — — — — — — ● ● ● — — —
ABEX® 8018 Proprietary APE-Free Liquid 31 0.05 37 ● — — ● ● — — L — ● ● ● ● ● ●
Formulated Anionics
ABEX® EP-100Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 4 Moles EO
APE Liquid 30 0.03 33 ● ● ● ● ● ● ● ● — ● ● ● ● ● ●
ABEX® EP-110Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 9 Moles EO
APE Liquid 30 0.01 37 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® EP-120Ammonium salt of
Sulfated Nonylphenol Ethoxylate; 30 Moles EO
APE Liquid 30 0.05 42 ● — — — ● — — — — ● ● ● ● ● ●
ABEX® EP-120 NASodium Salt of Sulfated Nonylphenol ethoxylate
APE Liquid 35 ND ND — — — — — — — — — ● ● ● ● ● ●
Formulated Emulsifiers / 3
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
FDA Status International Inventory Status
Product DescriptionAPE/
APE-Free HLBPhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
-re
a (K
EC
L)
Jap
an
(MIT
)
Nonionics
ABEX® 2515 Proprietary APE-Free 16.3 Liquid 50 0.03 38 ● — — ● ● — — — ● ● ● ● ● ● ●
ABEX® 2525/40 Proprietary APE-Free 17.4 Liquid 40 0.08 44 ● — — ● ● — — — ● ● ● ● ● ● ●
ABEX® 2535 Proprietary APE-Free 18.0 Liquid 50 0.09 45 ● — — ● ● R R — ● ● ● ● ● ● ●
ABEX® 2545 Proprietary APE-Free 18.3 Liquid 50 0.12 46 ● — — ● ● — — ● ● ● ● ● ● ● ●
Formulated Emulsifiers
4 /Surfactants and Specialties
FDA Status International Inventory Status
Product DescriptionAPE/
APE-Free HLBPhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
-re
a (K
EC
L)
Jap
an
(MIT
)
Nonionics
ABEX® 2515 Proprietary APE-Free 16.3 Liquid 50 0.03 38 ● — — ● ● — — — ● ● ● ● ● ● ●
ABEX® 2525/40 Proprietary APE-Free 17.4 Liquid 40 0.08 44 ● — — ● ● — — — ● ● ● ● ● ● ●
ABEX® 2535 Proprietary APE-Free 18.0 Liquid 50 0.09 45 ● — — ● ● R R — ● ● ● ● ● ● ●
ABEX® 2545 Proprietary APE-Free 18.3 Liquid 50 0.12 46 ● — — ● ● — — ● ● ● ● ● ● ● ●
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
Formulated Emulsifiers / 5
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
New
Zel
and
Phi
lipp
ines
ALKYL SULFATES
RHODAPON® UB STD Sodium Lauryl Sulfate Anionic Liquid 30 0.06 29 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODAPON® L-22EP Ammonium Lauryl Sulfate Anionic Liquid 28 0.06 33 ● — — ● ● — — — ● ● ● ● ● ● ● ●
RHODAPON® LX-28 AEP Sodium Lauryl Sulfate Anionic Liquid 30 0.06 29 ● ● ● ● ● ● ● — ● ● ● ● ● ● ● ●
ETHER SULFATES
RHODAPEX EST-30*Sodium Tridecyl Ether Sulfate;
3 Moles EOAnionic Liquid 30 0.08 33 ● — — — — — — — ● ● ● ● ● ● ● ●
RHODAPEX® LA-40SSodium Salt of Sulfated Linear Alcohol Ethoxylate; 4 Moles EO
Anionic Liquid 31 0.02 32 L — — L L — — L ● ● ● ● ● ● ● ●
RHODAPEX® LA-120SSodium Salt of sulfated linear
Alcohol Ethoxylate, 12 Moles EOAnionic Liquid 30 0.02 34 ● — — L L — — L ● ● — ● — — ● ●
RHODAPEX® LA-300SSodium Salt of sulfated linear
alcohol ethoxylate, 30 Moles EOAnionic Liquid 30 0.03 44 ● — — L L — ● L ● — ● — — ● ● ●
RHODAPEX® AB-20**Ammonium Salt of Sulfated
Alcohol Ethoxylate; 9 Moles EOAnionic Liquid 29 0.03 33 ● — — ● ● — — — ● ● ● ● ● ● ● ●
RHODAPEX® OPS-253Sulfate of Alkyl Phenol Ethoxylate
Sodium SaltAnionic Liquid 36 0.09 36 — — — — — — — — ● ● ● ● ● ● ● ●
RHODAPEX® CO-436Ammonium Salt of Sulfated
Alkylphenol Ethoxylate; 4 Moles EOAnionic Liquid 58 0.03 33 ● ● ● ● ● ● ● L ● ● ● ● ● — ● ●
6 /Surfactants and Specialties
Sulfates
* North America Only, **Europe- Asia
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
New
Zel
and
Phi
lipp
ines
ALKYL SULFATES
RHODAPON® UB STD Sodium Lauryl Sulfate Anionic Liquid 30 0.06 29 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODAPON® L-22EP Ammonium Lauryl Sulfate Anionic Liquid 28 0.06 33 ● — — ● ● — — — ● ● ● ● ● ● ● ●
RHODAPON® LX-28 AEP Sodium Lauryl Sulfate Anionic Liquid 30 0.06 29 ● ● ● ● ● ● ● — ● ● ● ● ● ● ● ●
ETHER SULFATES
RHODAPEX EST-30*Sodium Tridecyl Ether Sulfate;
3 Moles EOAnionic Liquid 30 0.08 33 ● — — — — — — — ● ● ● ● ● ● ● ●
RHODAPEX® LA-40SSodium Salt of Sulfated Linear Alcohol Ethoxylate; 4 Moles EO
Anionic Liquid 31 0.02 32 L — — L L — — L ● ● ● ● ● ● ● ●
RHODAPEX® LA-120SSodium Salt of sulfated linear
Alcohol Ethoxylate, 12 Moles EOAnionic Liquid 30 0.02 34 ● — — L L — — L ● ● — ● — — ● ●
RHODAPEX® LA-300SSodium Salt of sulfated linear
alcohol ethoxylate, 30 Moles EOAnionic Liquid 30 0.03 44 ● — — L L — ● L ● — ● — — ● ● ●
RHODAPEX® AB-20**Ammonium Salt of Sulfated
Alcohol Ethoxylate; 9 Moles EOAnionic Liquid 29 0.03 33 ● — — ● ● — — — ● ● ● ● ● ● ● ●
RHODAPEX® OPS-253Sulfate of Alkyl Phenol Ethoxylate
Sodium SaltAnionic Liquid 36 0.09 36 — — — — — — — — ● ● ● ● ● ● ● ●
RHODAPEX® CO-436Ammonium Salt of Sulfated
Alkylphenol Ethoxylate; 4 Moles EOAnionic Liquid 58 0.03 33 ● ● ● ● ● ● ● L ● ● ● ● ● — ● ●
Sulfates / 7
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
PHOSPHATE ESTERS
RHODAFAC® RS-410Aliphatic Phosphate Ester;
3 Moles EOAnionic Liquid 100 0.002 — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RS-610Aliphatic Phosphate Ester;
6 Moles EOAnionic Liquid 100 0.002 — ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-610A-25Aliphatic Phosphate Ester; 6 Moles
EO; Ammonium Salt SolutionAnionic Liquid 25 0.01 30 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-710Aliphatic Phosphate Ester;
10 Moles EOAnionic Liquid 100 0.002 36 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-710 DAliphatic Phosphate Ester;
10 Moles EOAnionic Liquid 30 0.002 36 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-960Aliphatic Phosphate Ester;
50 Moles EOAnionic Liquid 80 — — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RE-410 Aromatic Phosphate Ester; 3 EO Anionic Liquid 100 — — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RE-610Aromatic Phosphate Ester;
9 Moles EOAnionic Liquid 100 0.01 37 ● — — — — — — ● ● ● ● ● ● ●
RHODAFAC® RK-500 AAliphatic Phosphate Ester;
3.5 Moles EOAnionic Liquid 74 — — — — — — — — — — ● ● ● — — —
8 /Surfactants and Specialties
Phosphate Esters
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
PHOSPHATE ESTERS
RHODAFAC® RS-410Aliphatic Phosphate Ester;
3 Moles EOAnionic Liquid 100 0.002 — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RS-610Aliphatic Phosphate Ester;
6 Moles EOAnionic Liquid 100 0.002 — ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-610A-25Aliphatic Phosphate Ester; 6 Moles
EO; Ammonium Salt SolutionAnionic Liquid 25 0.01 30 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-710Aliphatic Phosphate Ester;
10 Moles EOAnionic Liquid 100 0.002 36 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-710 DAliphatic Phosphate Ester;
10 Moles EOAnionic Liquid 30 0.002 36 ● — — ● ● ● ● ● ● ● ● ● ● ●
RHODAFAC® RS-960Aliphatic Phosphate Ester;
50 Moles EOAnionic Liquid 80 — — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RE-410 Aromatic Phosphate Ester; 3 EO Anionic Liquid 100 — — — — — — — — — — ● ● ● ● ● ●
RHODAFAC® RE-610Aromatic Phosphate Ester;
9 Moles EOAnionic Liquid 100 0.01 37 ● — — — — — — ● ● ● ● ● ● ●
RHODAFAC® RK-500 AAliphatic Phosphate Ester;
3.5 Moles EOAnionic Liquid 74 — — — — — — — — — — ● ● ● — — —
Phosphates Esters / 9
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
FormSolids
Content (%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
SULFONATES
RHODACAL® A-246/LSodium Alpha Olefin
SulfonateAnionic Liquid 40 0.07 29 ● ● ● ● ● ● ● L ● ● ● ● ● ●
RHODACAL® 330Isopropyl Amine Dodecyl
Benzene SulfonateAnionic Liquid 90 0.1 32 ● — — — — — ● — ● ● ● — — —
RHODACAL® DS-10Sodium Dodecyl Benzene
SulfonateAnionic Flake 98 0.1 32 L L ● ● ● — — — ● ● ● ● ● ●
RHODACAL® DS-4Sodium Dodecyl Benzene
SulfonateAnionic Liquid 23 0.1 32 L L ● ● ● — — — ● ● ● ● ● ●
RHODACAL® DSBDisodium Alkyl
Diphenyloxide SulfonateAnionic Liquid 45 0.08 32 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODACAL® LDS-22Sodium Dodecyl (linear)
Benzene SulfonateAnionic Liquid 23 0.1 32 R ● ● ● ● — — — ● ● ● ● ● ●
SULFOSUCCINATES
GEROPON® SS-OIPDisodium Salt of Monoalkyl
Ether SulfosuccinateAnionic Liquid 40 0.1 30 — — — ● R — — L ● ● ● ● ● —
GEROPON® ACR-4Disodium Sort 4Monoalkyl ether Sulfosuccinate
Anionic Liquid 31 0.01 29 ● — — — — — — ● ● ● ● ● ● —
Geropon® 99Aqueous Dioctyl Sodium
sulfosuccinateAnionic Liquid 75 0.35 27 ● ● — ● ● — ● — ● ● ● ● ● ●
10 /Surfactants and Specialties
Sulfonates
FDA Status International Inventory Status
Product DescriptionIonic
ChargePhysical
FormSolids
Content (%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
SULFONATES
RHODACAL® A-246/LSodium Alpha Olefin
SulfonateAnionic Liquid 40 0.07 29 ● ● ● ● ● ● ● L ● ● ● ● ● ●
RHODACAL® 330Isopropyl Amine Dodecyl
Benzene SulfonateAnionic Liquid 90 0.1 32 ● — — — — — ● — ● ● ● — — —
RHODACAL® DS-10Sodium Dodecyl Benzene
SulfonateAnionic Flake 98 0.1 32 L L ● ● ● — — — ● ● ● ● ● ●
RHODACAL® DS-4Sodium Dodecyl Benzene
SulfonateAnionic Liquid 23 0.1 32 L L ● ● ● — — — ● ● ● ● ● ●
RHODACAL® DSBDisodium Alkyl
Diphenyloxide SulfonateAnionic Liquid 45 0.08 32 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODACAL® LDS-22Sodium Dodecyl (linear)
Benzene SulfonateAnionic Liquid 23 0.1 32 R ● ● ● ● — — — ● ● ● ● ● ●
SULFOSUCCINATES
GEROPON® SS-OIPDisodium Salt of Monoalkyl
Ether SulfosuccinateAnionic Liquid 40 0.1 30 — — — ● R — — L ● ● ● ● ● —
GEROPON® ACR-4Disodium Sort 4Monoalkyl ether Sulfosuccinate
Anionic Liquid 31 0.01 29 ● — — — — — — ● ● ● ● ● ● —
Geropon® 99Aqueous Dioctyl Sodium
sulfosuccinateAnionic Liquid 75 0.35 27 ● ● — ● ● — ● — ● ● ● ● ● ●
Sulfonates / 11
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
FDA Status International Inventory Status
Product Description
Moles of Ethylene
OxidePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) HLB 175.
105
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
ALIPHATIC ALCOHOL ETHOXYLATES
RHODASURF® BC-420 TDA Ethoxylate 3 Liquid 100 — 8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-610 TDA Ethoxylate 6 Liquid 100 — — 11.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-720 TDA Ethoxylate 9-10 Paste 100 — — 13.8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-729 TDA Ethoxylate 9-10 Liquid 90 — — 13.8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-840 TDA Ethoxylate 15 Paste 100 — — 15.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® TLA 3040 TDA Ethoxylate 30 Liquid 40 0.08 44 17.4 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TLA 4050 TDA Ethoxylate 40 Liquid 50 0.09 45 18 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TLA 5050 TDA Ethoxylate 50 Liquid 50 0.12 46 18.3 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TR 4070* TDA Ethoxylate 40 Liquid 70 — — — ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® L-4 LA Ethoxylate 4 Liquid 100 — — 9.7 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® LA-9/85 LA Ethoxylate 9 Liquid 85 — 13.1 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® LA-12/80 LA Ethoxylate 12 Liquid 80 — 14.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® ON-870 OA Ethoxylate 20 Solid 100 0.015 37 15.4 ● — ● ● — — — ● ● ● ● ● ●
RHODASURF® ON-877 OA Ethoxylate 20 Liquid 70 ● — ● ● — — — ● ● ● ● ● ●
RHODASURF® 6530 Proprietary — Liquid 65 0.08 41 17 ● ● — — ● — ● ● ● ● ● ● ●
RHODASURF® L-7/90 LA Ethoxylate 7 Liquid 90 — 30 12.5 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® S25 28 TSP Ethoxylate 25 Liquid 28 — 14.5 — — — — — — — ● ● ● ● ● ●
BLOCK CO-POLYMERS
ANTAROX® L-61 EO/PO — Flakes 100 — Insoluble 3.0 ● ● ● ● ● — — ● ● ● ● ● ●
ANTAROX® L-62 EO/PO Liquid 100 — Soluble 7.0 ● — ● ● ● — — ● ● ● ● ● ●
ANTAROX® L-64 EO/PO — Liquid 100 — 43.2 15.0 ● ● ● ● ● — — ● ● ● ● ● ●
*Europe- Asia
12 /Surfactants and Specialties
Nonionics (APE Free)
FDA Status International Inventory Status
Product Description
Moles of Ethylene
OxidePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC
(dynes/CM) HLB 175.
105
176.
170
176.
180
176.
200
176.
210
178.
3400
181.
30
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
ALIPHATIC ALCOHOL ETHOXYLATES
RHODASURF® BC-420 TDA Ethoxylate 3 Liquid 100 — 8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-610 TDA Ethoxylate 6 Liquid 100 — — 11.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-720 TDA Ethoxylate 9-10 Paste 100 — — 13.8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-729 TDA Ethoxylate 9-10 Liquid 90 — — 13.8 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® BC-840 TDA Ethoxylate 15 Paste 100 — — 15.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® TLA 3040 TDA Ethoxylate 30 Liquid 40 0.08 44 17.4 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TLA 4050 TDA Ethoxylate 40 Liquid 50 0.09 45 18 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TLA 5050 TDA Ethoxylate 50 Liquid 50 0.12 46 18.3 ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® TR 4070* TDA Ethoxylate 40 Liquid 70 — — — ● ● ● — — — ● ● ● ● ● ● ●
RHODASURF® L-4 LA Ethoxylate 4 Liquid 100 — — 9.7 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® LA-9/85 LA Ethoxylate 9 Liquid 85 — 13.1 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® LA-12/80 LA Ethoxylate 12 Liquid 80 — 14.4 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® ON-870 OA Ethoxylate 20 Solid 100 0.015 37 15.4 ● — ● ● — — — ● ● ● ● ● ●
RHODASURF® ON-877 OA Ethoxylate 20 Liquid 70 ● — ● ● — — — ● ● ● ● ● ●
RHODASURF® 6530 Proprietary — Liquid 65 0.08 41 17 ● ● — — ● — ● ● ● ● ● ● ●
RHODASURF® L-7/90 LA Ethoxylate 7 Liquid 90 — 30 12.5 ● ● ● ● ● — ● ● ● ● ● ● ●
RHODASURF® S25 28 TSP Ethoxylate 25 Liquid 28 — 14.5 — — — — — — — ● ● ● ● ● ●
BLOCK CO-POLYMERS
ANTAROX® L-61 EO/PO — Flakes 100 — Insoluble 3.0 ● ● ● ● ● — — ● ● ● ● ● ●
ANTAROX® L-62 EO/PO Liquid 100 — Soluble 7.0 ● — ● ● ● — — ● ● ● ● ● ●
ANTAROX® L-64 EO/PO — Liquid 100 — 43.2 15.0 ● ● ● ● ● — — ● ● ● ● ● ●
Nonionics (APE Free) / 13
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
FDA Status International Inventory Status
Product Description
Moles of Ethylene
OxideIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC (dynes/
CM) HLB 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
ALKYLPHENOL ETHOXYLATES
IGEPAL® CA-210 Octylphenol Ethoxylate 1.5 Nonionic Liquid 100 — Insoluble 4.8 ● — — ● — — ● — ● ● ● ● ● ●
IGEPAL® CA-630 Octylphenol Ethoxylate 9 Nonionic Liquid 100 0.005 31 13 ● R R R ● R R ● ● ● ● ● ● ●
IGEPAL® CA-877 Octylphenol Ethoxylate 23 Nonionic Liquid 70 — — 16.6 ● — — — ● — — — ● ● ● ● ● ●
IGEPAL® CA-887 Octylphenol Ethoxylate 30 Nonionic Liquid 70 0.03 38 17.4 ● — — ● ● — — ● ● ● ● ● ● ●
IGEPAL® CA-897 Octylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 18 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CA-407 Octylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 18 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CO-210 Nonylphenol Ethoxylate 1.5 Nonionic Liquid 100 - ● — ● — ● — ● ● ● ● ● ●
IGEPAL®CO-430 Nonylphenol Ethoxylate 4 Nonionic Liquid 100 - ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CO-530 Nonylphenol Ethoxylate 6 Nonionic Liquid 100 0.03 32 10.8 ● R R R ● R ● ● ● ● ● ● ● ●
IGEPAL® CO-630 Nonylphenol Ethoxylate 9 Nonionic Liquid 100 0.005 32 13 ● R R R ● R ● ● ● ● ● ● ● ●
IGEPAL® CO-720 Nonylphenol Ethoxylate 12 Nonionic Liquid 100 0.007 36 14.2 ● — — — ● — ● — ● ● ● ● ● ●
IGEPAL® CO-730 Nonylphenol Ethoxylate 15 Nonionic Liquid 100 0.008 39 15.0 ● — — — ● — ● — ● ● ● ● ● ●
IGEPAL® CO-858 Nonylphenol Ethoxylate 20 Nonionic Liquid 80 0.01 41 16.0 ● — — — ● — — ● ● ● ● ● ● ●
IGEPAL® CO-887 Nonylphenol Ethoxylate 30 Nonionic Liquid 70 0.02 45 17.2 ● R — R ● R R ● ● ● ● ● ● ●
IGEPAL® CO-897 Nonylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 17.8 ● R R R ● R R ● ● ● ● ● ● ●
IGEPAL® CO-977 Nonylphenol Ethoxylate 50 Nonionic Paste 70 0.05 44 18.2 ● — — — ● — R ● ● ● ● ● ● ●
IGEPAL® CO-987 Nonylphenol Ethoxylate 70 Nonionic Paste 70 0.05 48 18.6 — — — — ● — — — ● ● ● ● ● ●
IGEPAL® DM-430 Dinonylphenol Ethoxylate 7 Nonionic Liquid 100 — — 9.5 — — — — — — — — ● ● ● ● — ●
14 /Surfactants and Specialties
Nonionics
FDA Status International Inventory Status
Product Description
Moles of Ethylene
OxideIonic
ChargePhysical
Form
Solids Content
(%)
Critical Micelle
Concentration (%)
Surface Tension at CMC (dynes/
CM) HLB 175.
105
175.
300
175.
320
176.
170
176.
180
176.
200
176.
210
178.
3400
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
ALKYLPHENOL ETHOXYLATES
IGEPAL® CA-210 Octylphenol Ethoxylate 1.5 Nonionic Liquid 100 — Insoluble 4.8 ● — — ● — — ● — ● ● ● ● ● ●
IGEPAL® CA-630 Octylphenol Ethoxylate 9 Nonionic Liquid 100 0.005 31 13 ● R R R ● R R ● ● ● ● ● ● ●
IGEPAL® CA-877 Octylphenol Ethoxylate 23 Nonionic Liquid 70 — — 16.6 ● — — — ● — — — ● ● ● ● ● ●
IGEPAL® CA-887 Octylphenol Ethoxylate 30 Nonionic Liquid 70 0.03 38 17.4 ● — — ● ● — — ● ● ● ● ● ● ●
IGEPAL® CA-897 Octylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 18 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CA-407 Octylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 18 ● ● ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CO-210 Nonylphenol Ethoxylate 1.5 Nonionic Liquid 100 - ● — ● — ● — ● ● ● ● ● ●
IGEPAL®CO-430 Nonylphenol Ethoxylate 4 Nonionic Liquid 100 - ● ● ● ● ● ● ● ● ● ● ● ●
IGEPAL® CO-530 Nonylphenol Ethoxylate 6 Nonionic Liquid 100 0.03 32 10.8 ● R R R ● R ● ● ● ● ● ● ● ●
IGEPAL® CO-630 Nonylphenol Ethoxylate 9 Nonionic Liquid 100 0.005 32 13 ● R R R ● R ● ● ● ● ● ● ● ●
IGEPAL® CO-720 Nonylphenol Ethoxylate 12 Nonionic Liquid 100 0.007 36 14.2 ● — — — ● — ● — ● ● ● ● ● ●
IGEPAL® CO-730 Nonylphenol Ethoxylate 15 Nonionic Liquid 100 0.008 39 15.0 ● — — — ● — ● — ● ● ● ● ● ●
IGEPAL® CO-858 Nonylphenol Ethoxylate 20 Nonionic Liquid 80 0.01 41 16.0 ● — — — ● — — ● ● ● ● ● ● ●
IGEPAL® CO-887 Nonylphenol Ethoxylate 30 Nonionic Liquid 70 0.02 45 17.2 ● R — R ● R R ● ● ● ● ● ● ●
IGEPAL® CO-897 Nonylphenol Ethoxylate 40 Nonionic Liquid 70 0.04 44 17.8 ● R R R ● R R ● ● ● ● ● ● ●
IGEPAL® CO-977 Nonylphenol Ethoxylate 50 Nonionic Paste 70 0.05 44 18.2 ● — — — ● — R ● ● ● ● ● ● ●
IGEPAL® CO-987 Nonylphenol Ethoxylate 70 Nonionic Paste 70 0.05 48 18.6 — — — — ● — — — ● ● ● ● ● ●
IGEPAL® DM-430 Dinonylphenol Ethoxylate 7 Nonionic Liquid 100 — — 9.5 — — — — — — — — ● ● ● ● — ●
APE Nonionics / 15
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
International Inventory Status
Trade Name % of Solid Tg (°C) % Water Inhibitor ppmSpecific gravity U
S (T
SC
A)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
Chi
na
(JE
CS
C)
Phi
lipp
ines
(P
ICC
S)
New
Zea
land
(N
ZIo
C)
Performance Features and Application
PAM TechnologyAdhesion and Much More
SIPOMER® PAM-100 100 -18 <1 MEHQ/~5000 1.2 ● — ● ● ● — ● — ●
w Improved adhesion on metal, glass, and other inorganic substrates
w High mono/di alkyl phosphate ratio and low residual acidw Improved latex stability
SIPOMER® PAM-200 100 0 <1 MEHQ/~5000 1.1 ● — ● ● ● — ● — —
w Improved adhesion on metal, glass, and other inorganic substrates
w Excellent compatibility with most common organic systemsw High mono/di alkyl phosphate ratio and low residual acidw Improved anti-corrosion propertiesw Polymerizable surfactant
SIPOMER® PAM-300 100 -40 <1 MEHQ/~5000 1.1 ● — ● — — — ● — —
w Improved adhesion on metal, glass, and other inorganic substrates
w Excellent compatibility with most common organic systemsw High mono/di alkyl phosphate ratio and low residual acidw Improved anti-corrosion propertiesw Polymerizable surfactant
SIPOMER® PAM-4000 100 ND <0.25 MEHQ/~400 1.2 ● ● ● ● ● — ● ● ●w Improved adhesion on metal substratew Improved latex stabilityw Improved gloss
SIPOMER® PAM 5000 100 NA 1.0 max none 1.25 ● — ● — — —Improved scrub resistance when formulated into vinyl binders for high PVC paints
Polymerizable Stabilizers
SIPOMER ® COPS-1 40 NA 60 none 1.17 ● ● ● ● ● ● ● ● ●
Reactive co-stabilizer providing:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
SIPOMER® COPS-3* 25 NA 75 none — — — — — — ● — —Reactive co-stabilizer providing scrub/washability for high PVC coating formulation
SIPOMER ® AES-100 97 NA <2.0 none 1.0 ● — ● — — — — — —
Reactive co-stabilizer providing:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
SIPOMER ® AAE-10 99 NA <0.3 none — ● ● ● ● ● ● ● ● ●
Nonionic reactive co-stabilizer:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
* Asia - Latin America - MEA
* Remainder consists of acrylic acid (~20%) and higher adducts (~50%) ** Sipomer® BEM contains ~25% methacrylic acid *** Sipomer® SEM-25 contains ~20% methacrylic acid **** Sipomer® WAM II-25 contains ~25% methacrylic acid
16 /Surfactants and Specialties
Specialty Monomers
International Inventory Status
Trade Name % of Solid Tg (°C) % Water Inhibitor ppmSpecific gravity U
S (T
SC
A)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
Chi
na
(JE
CS
C)
Phi
lipp
ines
(P
ICC
S)
New
Zea
land
(N
ZIo
C)
Performance Features and Application
PAM TechnologyAdhesion and Much More
SIPOMER® PAM-100 100 -18 <1 MEHQ/~5000 1.2 ● — ● ● ● — ● — ●
w Improved adhesion on metal, glass, and other inorganic substrates
w High mono/di alkyl phosphate ratio and low residual acidw Improved latex stability
SIPOMER® PAM-200 100 0 <1 MEHQ/~5000 1.1 ● — ● ● ● — ● — —
w Improved adhesion on metal, glass, and other inorganic substrates
w Excellent compatibility with most common organic systemsw High mono/di alkyl phosphate ratio and low residual acidw Improved anti-corrosion propertiesw Polymerizable surfactant
SIPOMER® PAM-300 100 -40 <1 MEHQ/~5000 1.1 ● — ● — — — ● — —
w Improved adhesion on metal, glass, and other inorganic substrates
w Excellent compatibility with most common organic systemsw High mono/di alkyl phosphate ratio and low residual acidw Improved anti-corrosion propertiesw Polymerizable surfactant
SIPOMER® PAM-4000 100 ND <0.25 MEHQ/~400 1.2 ● ● ● ● ● — ● ● ●w Improved adhesion on metal substratew Improved latex stabilityw Improved gloss
SIPOMER® PAM 5000 100 NA 1.0 max none 1.25 ● — ● — — —Improved scrub resistance when formulated into vinyl binders for high PVC paints
Polymerizable Stabilizers
SIPOMER ® COPS-1 40 NA 60 none 1.17 ● ● ● ● ● ● ● ● ●
Reactive co-stabilizer providing:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
SIPOMER® COPS-3* 25 NA 75 none — — — — — — ● — —Reactive co-stabilizer providing scrub/washability for high PVC coating formulation
SIPOMER ® AES-100 97 NA <2.0 none 1.0 ● — ● — — — — — —
Reactive co-stabilizer providing:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
SIPOMER ® AAE-10 99 NA <0.3 none — ● ● ● ● ● ● ● ● ●
Nonionic reactive co-stabilizer:w Low foaming latexesw Better latex stability at low surfactant dosagew Coatings with improved water and bleach resistance
International Inventory Status Codes
● Listed — Not Listed
Specialty Monomers / 17
* Asia - Latin America - MEA
* Remainder consists of acrylic acid (~20%) and higher adducts (~50%) ** Sipomer® BEM contains ~25% methacrylic acid *** Sipomer® SEM-25 contains ~20% methacrylic acid **** Sipomer® WAM II-25 contains ~25% methacrylic acid
International Inventory Status
Trade Name % of Solid Tg (°C) % Water Inhibitor ppmSpecific gravity U
S (T
SC
A)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
Chi
na
(JE
CS
C)
Phi
lipp
ines
(P
ICC
S)
New
Zea
land
(N
ZIo
C)
Performance Features and Application
Resin Modifiers
SIPOMER® IBOA 100 94 <0.05 MEHQ/112 0.985 ● ● ● ● ● ● ● ● ●
High Tg hydrophobic monomer providing:w Improved chemical and water resistancew Better gloss and better mar resistancew An excellent radiation curable reactive diluent
SIPOMER® IBOMA 100 110 <0.05 MEHQ/108 0.983 ● ● ● ● ● ● ● ● ●
High Tg hydrophobic monomer providing:w Improved chemical and water resistancew Better gloss and better mar resistancew Lower viscosity in high solid solvent based resin systems
SIPOMER® B-CEA 30* 37 0.5 MEHQ/1000 1.2 ● ● ● ● ● ● ● ● ●
Low Tg acidic monomer:w Effective adhesion promoter for resins used in coatings
and adhesivesw Improved peel strength for adhesives
Rheology
SIPOMER® BEM 50** ND 25 MEHQ/1000 1.06 ● ● ● — ● — ● ● ● Specialty monomer design for low shear HASE polymer
SIPOMER® SEM-25 60*** ND 20 MEHQ/600 1.07 ● ● ● — — — ● — ●Specialty monomer design for mid to high shear HASE polymer
SIPOMER® HPM 100 50 ND 50 MEHQ/1000 1.06 ● ● ● ● ● — ● ● ● Specialty monomer design for mid shear HASE polymer
SIPOMER® HPM 200 50 ND 50 MEHQ/1000 1.06 ● ● ● ● — ● — ● — Specialty monomer design for newtonian HASE polymer
SIPOMER® HPM 400 50 ND 50 MEHQ/1000 1.06 ● ● ● — ● — ● ● ●Specialty monomer design for low to mid shear HASE polymer
Wet Adhesion
SIPOMER® WAM 90 NA 10 none 1.15 ● ● ● — — — — — ● Wet adhesion monomer for latex paints
SIPOMER® WAM II 50*** 87 30 HQ/1800 1.11 ● ● ● ● ● ● ● ● ● Wet adhesion monomer for latex paints
SIPOMER® WAM E W50 50 ND 50 TEMPO 250 and
HQ 750 ppm1.100 ● — — ● — ● ● — ● Wet adhesion monomer for paint applications
18 /Surfactants and Specialties
Specialty Monomers
International Inventory Status Codes
● Listed — Not Listed
International Inventory Status
Trade Name % of Solid Tg (°C) % Water Inhibitor ppmSpecific gravity U
S (T
SC
A)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
Chi
na
(JE
CS
C)
Phi
lipp
ines
(P
ICC
S)
New
Zea
land
(N
ZIo
C)
Performance Features and Application
Resin Modifiers
SIPOMER® IBOA 100 94 <0.05 MEHQ/112 0.985 ● ● ● ● ● ● ● ● ●
High Tg hydrophobic monomer providing:w Improved chemical and water resistancew Better gloss and better mar resistancew An excellent radiation curable reactive diluent
SIPOMER® IBOMA 100 110 <0.05 MEHQ/108 0.983 ● ● ● ● ● ● ● ● ●
High Tg hydrophobic monomer providing:w Improved chemical and water resistancew Better gloss and better mar resistancew Lower viscosity in high solid solvent based resin systems
SIPOMER® B-CEA 30* 37 0.5 MEHQ/1000 1.2 ● ● ● ● ● ● ● ● ●
Low Tg acidic monomer:w Effective adhesion promoter for resins used in coatings
and adhesivesw Improved peel strength for adhesives
Rheology
SIPOMER® BEM 50** ND 25 MEHQ/1000 1.06 ● ● ● — ● — ● ● ● Specialty monomer design for low shear HASE polymer
SIPOMER® SEM-25 60*** ND 20 MEHQ/600 1.07 ● ● ● — — — ● — ●Specialty monomer design for mid to high shear HASE polymer
SIPOMER® HPM 100 50 ND 50 MEHQ/1000 1.06 ● ● ● ● ● — ● ● ● Specialty monomer design for mid shear HASE polymer
SIPOMER® HPM 200 50 ND 50 MEHQ/1000 1.06 ● ● ● ● — ● — ● — Specialty monomer design for newtonian HASE polymer
SIPOMER® HPM 400 50 ND 50 MEHQ/1000 1.06 ● ● ● — ● — ● ● ●Specialty monomer design for low to mid shear HASE polymer
Wet Adhesion
SIPOMER® WAM 90 NA 10 none 1.15 ● ● ● — — — — — ● Wet adhesion monomer for latex paints
SIPOMER® WAM II 50*** 87 30 HQ/1800 1.11 ● ● ● ● ● ● ● ● ● Wet adhesion monomer for latex paints
SIPOMER® WAM E W50 50 ND 50 TEMPO 250 and
HQ 750 ppm1.100 ● — — ● — ● ● — ● Wet adhesion monomer for paint applications
Specialty Monomers / 19
Product uses FDA Status International Inventory Status
Product Description AP
E F
ree
VO
C-F
ree
Co
ntai
ns
Sili
cone
Oil
Acr
ylic
Vin
yl
acry
lics,
VA
E
SB
R
175.
105
176.
170
176.
180
176.
200
176.
210
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
RHODOLINE® DF 540*Zero VOC white oil defoamer for in-process latex processing. BfR compliant
● ● Yes ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 635 Zero VOC oil defoamer for in-process foam control ● ● No ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 646Zero VOC oil defoamer for in-process vinyl and natural latex foam control
● ● Yes ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 670 Zero VOC oil defoamer for in-process vinyl latex processing ● ● No ● ● ● ● ● ● ● ● ● ● — ● ●
RHODOLINE® 990 Oil-free defoamer for latex systems, minimum impact on gloss ● ● No ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 999* Oil-free defoamer for latex systems, minimum impact on gloss ● ● No ● ● L L L L L ● ● ● — ● ●
20 /Surfactants and Specialties
*REACH Compliant
Rhodoline® Defoamers
Product uses FDA Status International Inventory Status
Product Description AP
E F
ree
VO
C-F
ree
Co
ntai
ns
Sili
cone
Oil
Acr
ylic
Vin
yl
acry
lics,
VA
E
SB
R
175.
105
176.
170
176.
180
176.
200
176.
210
US
(TS
CA
)
Can
ada
(DS
L)
Eur
op
e (E
INE
CS
)
Aus
tral
ia
(AIC
S)
So
uth
Ko
rea
(KE
CL)
Jap
an (M
IT)
RHODOLINE® DF 540*Zero VOC white oil defoamer for in-process latex processing. BfR compliant
● ● Yes ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 635 Zero VOC oil defoamer for in-process foam control ● ● No ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 646Zero VOC oil defoamer for in-process vinyl and natural latex foam control
● ● Yes ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 670 Zero VOC oil defoamer for in-process vinyl latex processing ● ● No ● ● ● ● ● ● ● ● ● ● — ● ●
RHODOLINE® 990 Oil-free defoamer for latex systems, minimum impact on gloss ● ● No ● ● ● ● ● ● ● ● ● ● ● ● ● ●
RHODOLINE® 999* Oil-free defoamer for latex systems, minimum impact on gloss ● ● No ● ● L L L L L ● ● ● — ● ●
Rhodoline® Defoamers / 21
FDA Listing Status Codes
● Listed with no specific limits
E Extraction limitation
L Listed with limitations
R Referenced with no limitations
RL Referenced with limitations
International Inventory Status Codes
● Listed — Not Listed
The way we do businessSolvay puts into practice a sustainable development policy called Solvay Way because we are convinced our future is dependent
upon the responsible way in which we conduct our current activities — a way that reflects our commitment to each of our
stakeholders. Solvay Way encompasses three interlinked, equally important spheres: the Environment Sphere, the People Sphere
and the Economic Sphere.
Based on a framework of responsibilities, Solvay Way allows Solvay sites and businesses to conduct self—assessments of their
practices and establish action plans that promote continuous progress. At Solvay, the way we do business creates sustainable
value for all our stakeholders through innovation and partnership.
> Responsible Care is the chemical industry’s voluntary continuous improvement initiative to promote safe handling of products. (1987)
> The UN’s Global Compact aims to ensure that heads of companies promote and uphold 10 universal principles concerning human rights, Working Conditions, Respect for the environment and anti—corruption. (2003)
> The International Federation of Chemical, Energy, Mine and General Workers’ Unions. (2005)
> Solvay Novecare has achieved world—wide ISO—9001 Quality Management
System Multi—Site Certification. (2008)
North AmericaSolvay Novecare—504 Carnegie Center Drive, Princeton, NJ 08540—USAPhone: +1-800-973-7873—Fax: +1-609-860-0463—[email protected]
EuropeSolvay Novecare—40, rue de la Haie—Coq-F—93306 Aubervilliers Cedex—FrancePhone: +33 (0) 1 53 56 50 00 – Fax: +33 (0) 1 53 56 53 90
Asia PacificSolvay Asia Pacific Pte. Ltd.—438B Alexandra Road—#02—09/12 Alexandra Technopark—Singapore 119968Phone: +65-6291 1921—Fax: +65—6394 3377
Latin America Solvay Novecare—Centro Empresarial—Avenida Maria Coelho Aguiar, 215, Bloco B-1º AndarCep: 05804-902 —São Paulo—SP BrazilPhone: +55 11 3747-7637—Fax: +55 11 3741-8378
www.solvay.com
Material Safety Data Sheets (MSDS) are available by emailing us or contacting your sales representative. Always consult the appropriate MSDS before using any of our products.
Neither Solvay Specialty Polymers nor any of its affiliates makes any warranty, express or implied, including merchantability or fitness for use, or accepts any liability in connection with this product, related information or its use. Some applications of which Solvay’s products may be proposed to be used are regulated or restricted by applicable laws and regulations or by national or international standards and in some cases by Solvay’s recommendation, including applications of food/feed, water treatment, medical, pharmaceuticals, and personal care. Only products designated as part of the Solviva® family of biomaterials may be considered as candidates for use in implantable medical devices. The user alone must finally determine suitability of any information or products for any contemplated use in compliance with applicable law, the manner of use and whether any patents are infringed. The information and the products are for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other substance or any other process. This is not a license under any patent or other proprietary right.
All trademarks and registered trademarks are property of the companies that comprise the Solvay Group or their respective owners.© 2012 Solvay Specialty Polymers USA, LLC. All rights reserved. N
AM
AR
CH
201
6S
OLV
AY N
OV
EC
AR
E —
DiL
eo G
rap
hic
Des
ign,
mar
iad
ileo@
com
cast
.net