Monti Mac Page 1

Since 1931 MONTI-MAC means AUTOMATION in the stitching and cutting processes of traditional and technical textiles. The mainly fields of application of our products are the following :

"traditional fabrics" where we are in a position to supply: automatic GREY PREPARATION LINES for woven and knitted fabrics and AUTOMATIC STITCHING and HEMMING machines for HOME TEXTILE (terry towels, bed sheets, pillow cases, bags etc).

"technical fabrics" where we are in a position to supply automatic machines for GEOTEXTILE, NET FOR AGRICOLTURE, KEVLAR, FIBER GLASS etc.

Any project is followed directly by our supervisors from the development of the project, manufacturing and commissioning / start up in the factory of the customer to post sale service. Actually we are very proud to announce that we are in a position to assist our customers in the World with local service and technical staff directly trained in Italy. Thanks at least to the purchasing of the know-how of the factory Elcu Sud Impianti, actually we are in a position to supply PORTABLE sewing machines for textile and no-textile applications as the "bag closer" in chemical industry, pet food, row materials, food etc. We have also our THREAD DIVISION suitable to assist ALL our customer in the right choice of the thread to use for a certain type of process.

Monti Mac Page 2

Mod. 91 E

Sewing machine with CHAIN STITCH, 1 needle, 1 thread, ideal to join WOVEN fabrics, KNITTED fabrics, plastic materials, NON-WOVEN fabrics, felts, agriculture nets, fiber glass, kevlar and so on. Available with BATTERY, when requested the seam in places without electric connection or simply for people appreciating the “no cable/wireless” technology for making sewing where necessary. In case of use of the machine in dangerous places and/or with fire/burst risks, the right CHOISE is the PNEUMATIC version, especially studied for such uses. More, we can offer a special weight absorber: the machine can be hanged up granting the best ergonomic operation.

Monti Mac Page 3

Mod. TC101E (Standard Stitch 17mm width)

BUTTED SEAM SEWING machine, 1 needle, 1 thread, ideal to join head-to-tail with FLAT seam – without thickness – WOVEN - KNITTED - COATED fabrics, artificial leather, NO WOVEN fabrics and so on for the preparation to textile process and mainly to DIGITAL PRINTING.

The perfect FLAT SEAM and the very EASY HANDLING of the machine TC101 E grants the

perfect installation inside any DIGITAL PRINTING department as well as the seam done is

considered the BEST solution for the joining of the rolls at the entrance of DIGITAL PRINTING

machines due to the TOTAL ABSENCE of any EXTRA THICKNESS on fabrics.

HIGH QUALITY of the MATERIALS used for manufacturing of machine mod. TC101E, grants a huge flexibility of use on light fabrics (60/70gsm) as well as on heavy fabrics (up to 450/500 gsm and more). Standard sewing depth 17mm. – ON DEMAND mod. “101E W” suitable to reach 21mm. sewing depth. Available special devices and equipments to seam coated fabrics, artificial leather and in general very stiff and thick products. Very easy the use thanks to the ergonomic handle and its weight under 4 kg in the electric model. Available with BATTERY, when requested the seam in uncomfortable locations (as DIGITAL PRINTING rooms) or without electric connection or simply for people appreciating the “no cable/wireless” technology for making sewing where necessary. In case of use of the machine in dangerous places with fire/burst risks, the right unit is the PNEUMATIC one, especially studied for such uses. More, we can offer a special weight absorber: the machine can be hanged up granting the best ergonomic operation to the operator.

Monti Mac Page 4

Mod. 91SA-E

Chain stitch sewing machine, 1 needle, 1 thread, designed to close by seam BAGS in PAPER, PLASTIC, NET, JUTA, FABRICS, and so on. The wide arm of the unit allows to easily seam SMALL, MEDIUM and LARGE BAGS. Possibility to seam attaching "CREPE PAPER" or even inserting in the seam a special reinforcing cord. Very easy the use thanks to the ergonomic handle and its weight under 3,5 kg in the electric model. Available with BATTERY, when requested the seam in uncomfortable places or without electric connection or simply for people appreciating the “no cable/wireless” technology for making sewing where necessary. In case of use of the machine in dangerous places with fire/burst risks, the right model is the PNEUMATIC one, especially studied for such uses. More, we can offer a special weight absorber: the machine can be hanged up granting the best ergonomic operation to the operator.

Monti Mac Page 5

Seam type D

TYPE OF SEAM D is the "LEADER" in the END WISE JOINING SEAM of KNITTED and WOVEN fabrics for their preparation to textile operation as DYEING, PRINTING and FINISHING. The seam is perfectly FLAT, 1 thread, easy dethreading and the absence of COPY MARK is granted. Each sewing head can be SET in order to obtain a FLAT seam, GAP seam or OVERLAPPED seam as per request of the process maintaining always the best PERFOMANCES both in TRADITIONAL TEXTILE and in TECHNICAL TEXTILE field. On the base of the specific requirements of the process, the following solutions are available:

Monti Mac Page 6

MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24 Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Base solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine. SEWING RAILS Mod. TA21, Sewing RAILS made FIX or MOVABLE ON WHEELS that grant a RECTILINEAR-STRAIGHT END to END seam, with both selvedges WELL ALIGNED; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam. Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to make the BATCH (A frame) to be processed inside the textile mill.

Monti Mac Page 7

Seam type Y

Type of seam Y, FLAT at 1 thread with REINFORCING OF STICTHES ON SELVEDGES, is the MOST RESISTENT seam in the END WISE JOINING SEAM of grey woven fabrics during the preparation to the DYEING and PRINTING operations. Due to the higher stitch density, the seam is MORE RESISTANT and will not “open” accidentally on selvedges, avoiding in this way the folding up of the selvedge with the risk of wastage of many meters of fabrics. Each sewing head can be SET with different SET-UPS in order to obtain a FLAT seam, GAP seam or OVERLAPPED seam as per request of the process maintaining always the best PERFOMANCES both in TRADITIONAL TEXTILE and in TECHNICAL TEXTILE field. On the base of the specific requirements of the process, the following solutions are available: MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24 Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine. The stitch reinforcing is MANUALLY moved by the operator pressing the specific device. SEWING RAILS Mod. TA21 Sewing RAILS made FIX or MOVABLE ON WHEELS that grant a RECTILINEAR-STRAIGHT END to END seam, with both edges WELL ALIGNED and with the STITCH REINFORCED on the both sides; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam.

Monti Mac Page 8

Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to make the BATCH (A frame) to be processed inside the textile mill. The stitch reinforcing is AUTOMATICALLY moved by the machine during its running on the sewing rail TA21. The density of the stitches on the edges and in the middle of the seam can be adjusted acting on a specific adjusting device. AUTOMATIC STITCHING LINE Mod. CA5: pls visit the chapter "GREY PREPARATION LINES"

Seam type 105/W The type of seam "105" FLAT and without THICKNESS, at 1 thread, is the RIGHT SOLUTION for the END to END JOINING SEAM of WOVEN and KNITTED FABRICS for the preparation to the traditional DYEING/PRINTING processes and also DIGITAL PRINTING. Stitch depth is 17mm and the maximum speed is 2000 rpm. The model "W" of the same unit, is the ANSWER to the problem of END to END joining seam of weak fabrics because due to the wider stitch of 21mm instead the standard one of 17mm, GRANTS higher resistance in any textile operation MAINLY in CONTINUE and DISCONTINUE TUMBLER DRYIER. Both seams are perfectly FLAT, 1 thread, very USEFULL for DIGITAL PRINTING and also for DYEING for the absence of extra thick at every joint of 2 rolls in work.

Monti Mac Page 9

Each sewing head can be SET in order to obtain a FLAT seam, GAP seam or OVERLAPPED seam as per request of the process maintaining always the best PERFOMANCES both in TRADITIONAL TEXTILE and in TECHNICAL TEXTILE field.

On the base of the specific requirements of the process, the following solutions are available: MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24

Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Base solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine. AUTOMATIC SEWING RAILS Mod. TA21 Sewing RAILS, FIX or MOVABLE ON WHEELS, grant a RECTILINEAR-STRAIGHT END to END seam, with both selvedges WELL ALIGNED; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam. Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to make the BATCH (A frame) to be processed inside the textile mill. MANUAL SEWING RAIL mod.AAT2000

Manual sewing rails FIX or MOVABLE ON WHEELS, granting the STRAIGHT END to END seam on WOVEN and KNITTED fabrics. Thanks to its small dimension, it is the very USEFULL at the entrance of DIGITAL and TRADITIONAL PRINTING MACHINES.

Monti Mac Page 10

Seam type EM

Monti Mac Page 11

The seam type EM flat/without THICKNESS, at 1 thread is the answer to the problems of joining END to END HEAVY fabrics (tufting and woven carpets, coated fabrics, artificial leather and also knitted fabrics) because thanks to the strong mechanical structure of the sewing head it allows to seam products having a weight up to 1500 gsm. Stitch depth 21mm. – sewing speed 2000 rpm. It is also possible vary the machine SET-UP in order to obtain a FLAT seam, a little OPEN seam (GAP) or even OVERLAPPED seam with high resistance according to the different request of job. On the base of the specific requirements of the process, the following solutions are available: MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24 Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Base solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine. SEWING RAILS Mod. TA21 Sewing RAILS made FIX or MOVABLE ON WHEELS that grant a RECTILINEAR-STRAIGHT END to END seam, with both selvedges WELL ALIGNED; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam. Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to make the BATCH (A frame) to be processed inside the textile mill. The possibility of installation of an extra CUTTING GROUP, grant the best performance of the system even in presence of very HEAVY and THICK product that working with sewing machine only give many and many troubles in the functionament of the system.

Seam type 128-01 CHAIN STITCH sewing type 128-01, at 1 thread is IDEAL to join END to END woven and knitted fabrics for the preparation to textile operations that require HIGH RESISTANCE by the seam a MILLING, JET DYEING, TUMBLER DRYING etc. It can sew either DRY and WET fabrics, due to the fact that all parts contacting the fabric are made in stainless steel. Adjustable stitch length from 3 up to 6mm and maximum speed 1200 stitches per minute. In presence of very HEAVY and THICK products (1200/1500gsm) it is also available a special model with DOUBLE FEED DOG (upper and lower) in order to maintain always parallel and well aligned the 2 fabric edges during the stitching process granting always the BEST QUALITY for the seam. On the base of the specific requirements of the process, the following solutions are available:

Monti Mac Page 12

MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24 Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine that requires this specific kind of stitch. SEWING RAILS Mod. TA21 Sewing RAILS made FIX or MOVABLE ON WHEELS that grant a RECTILINEAR-STRAIGHT END to END seam, with both edges WELL ALIGNED and with the STITCH REINFORCED on the both sides; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam. Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to make the BATCH (A frame) to be processed inside the textile mill. SEWING CYCLE SEMI-AUTOMATIC. MANUAL SEWING RAIL mod.AAT2000, Sewing RAILS made FIX or MOVABLE ON WHEELS that grants the MANUAL END to END seam, STRAIGHT and width the EDGES well ALIGNED on woven and knitted fabrics. This very EASY and BASIC solution is very USEFULL at the INLET of TEXTILE machines that require this specific kind of seam for the process and thanks to the very thin frame this rail is very well recommended. PORTABLE MACHINES, pls visit the chapter "PORTABLE SEWING MACHINES".

AUTOMATIC STITCHING LINE mod. CA5: pls visit the chapter "GREY PREPARATION LINES"

Monti Mac Page 13

Seam type 128-02

DOUBLE CHAIN STITCH sewing type 128-02, at 2 threads is IDEAL to join END to END woven and knitted fabrics for the preparation to textile operations that require HIGH RESISTANCE by the seam a MILLING, JET DYEING, TUMBLER DRYING etc. La presenza di 2 AGHI, permette di eseguire 2 CUCITURE parallele e SFALSATE ad una distanza di 1mm l'una dall'altra ottenendo in questo modo il MASSIMO DELLA RESISTENZA. The presence of 2 needles on the machine grants the execution of 2 seams PARALLEL and at a distance of 1mm one by the other. The MAXIMUM RESISTANCE is guaranted. It can sew either DRY and WET fabrics, due to the fact that all parts contacting the fabric are made in stainless steel. Adjustable stitch length from 3 up to 6mm and maximum speed 1200 stitches per minute. In presence of very HEAVY and THICK products (1200/1500gsm) it is also available a special model with DOUBLE FEED DOG (upper and lower) in order to maintain always parallel and well aligned the 2 fabric edges during the stitching process granting always the BEST QUALITY for the seam. On the base of the specific requirements of the process, the following solutions are available: MOVABLE STANDS ON WHEELS Mod. TU03 / GAB24 Movable stands either in painted steel (by epossidic paints) or in stainless steel, available with electric feeding (380V. three-phases, 220V. single phase, 48V single phase or with battery 24V) or with PNEUMATIC operation (suitable for dangerous working conditions). Solution recommended for the for END TO END joining seam inside textile mills - in front of each processing machine that requires this specific kind of stitch. SEWING RAILS Mod. TA21 Sewing RAILS made FIX or MOVABLE ON WHEELS that grant a RECTILINEAR-STRAIGHT END to END seam, with both edges WELL ALIGNED and with the STITCH REINFORCED on the both sides; technical details that inside a textile process means an improvement of the QUALITY of the same process for the absence of defects across each joining seam. Solution recommended for the JOINING of the SINGLE PIECE inside the grey department to

Monti Mac Page 14

make the BATCH (A frame) to be processed inside the textile mill. SEWING CYCLE SEMI-AUTOMATIC. MANUAL SEWING RAIL mod.AAT2000, Sewing RAILS made FIX or MOVABLE ON WHEELS

that grants the MANUAL END to END seam, STRAIGHT and width the EDGES well ALIGNED on woven and knitted fabrics. This very EASY and BASIC solution is very USEFULL at the INLET of TEXTILE machines that require this specific kind of seam for the process and thanks to the very thin frame this rail is very well recommended. PORTABLE MACHINES, pls visit the chapter "PORTABLE SEWING MACHINES". AUTOMATIC STITCHING LINE mod. CA5: pls visit the chapter "GREY PREPARATION LINES"

Mod. CA5 - PATENT PENDING AUTOMATIC machine for the END to END joining seam of woven fabrics for the preparation to the follow textile processes as bleaching, mercerizing, dyeing, DIGITAL PRINTING as well as TRADITIONAL and finishing.

Monti Mac Page 15

PATENTED working system that foresee the SIMULTANEOS: ROLL'S UNWINDING + AUTOMATIC STITCHING

that if done together grants a very important improvement of the DAILY capacity of each worker up to 60/70% in comparison with a traditional system of job where the above processes (roll's unwinding and stiching) are done in 2 different times. More ... AUTOMATIC STICH improves also the QUALITY of the stitch done granting the BEST QUALITY from this process for the following reasons: - STRAIGHT SEAM: the seam done by the system is STRAIGHT and PERPENDICULAR to

the selvedges preventing folds or creases during continuous processes. This is a very big advantage for DIGITAL PRONTING and continues dyeing.

- SEAM with WELL ALIGNED SELVEDGES: the 2 selvedges, sewn at beginning and end of

the seam, are WELL ALIGNED, so preventing any problem during continuous finishing process and/ or DIGITAL PRNTING.

- FLAT SEAM: the seam is FLAT, without thickness - type "Y" or type "EM" - Pls see the

different kind of seams in "end to end" chapter to get more details. Recommanded for DIGITAL PRINTING.

- SEAM with AUTOMATIC THREAD CUTTING: at the beginning and to the end of the seam,

the machine makes automatically the cutting of the sewing thread. The AUTOMATIC sewing group mod. CA5 can be equipped with a PATENTED PRINTER for the printing oon the fabric SIMULTANEOUSLY to the seam and alphanumeric code for the identification of the fabric inside textile mill. The CODE is printed in ZERO TIME been done simultaneously to the sewing process. Pls visit also the chapter "PRINTER WRITE 14N" to get more details on the process. Automatic sewing group mod. CA5 can process fabric in ROLLS, SINGLE PIECES, PALLETTIZED and on A FRAME without any difficoutly thanks to the many different technical set-up and configurations available.

Monti Mac Page 16

The machine can be equipped and completed with some EXIT GROUPS that on the base of the each specific request can UPWIND the fabric on A FRAME, PLAIT DOWN the same fabric in a TROLLEY or in case it is required flexibilty to the line, it is possible the installation of a COMBINED EXIT on A frame and on TROLLEY. In case it is required the CLEANING of the fabric by the textile dust coming by weaving process, it is possible the installation on the line of AUTOMATIC brushing systems and dust vacum in order to clean the fabric processed and collect the dust by mean a specific filtering systems. See the chapter "BOR-FAN"

Mod. 2190

Monti Mac Page 17

AUTOMATIC bag sewing machine for the closing in TUBULAR FORM of open width fabric with a chain stitch seam EDGE on EDGE. Two different model are available: one for KNITTED FABRICS (mod. 2190-M1-SP) and one for WOVEN FABRICS / WOOL (mod. 2190-L1-SP). The stitch done is CHAIN stitch 1 neelde, 1 thread very EASY to be "unstitched/dethreaded". Thanks to the installation on the machine of different electronic CONTROLS, the machine grants: - FASTEST speed actully available on the WORLD WIDE market (up to 80 meters pe rminute

with maximum stitch lenght) - MAXIMUM FLEXIBILITY of job with ANY kind of LIGHT (ACETATE, VISCOSE,

POLYAMMIDE) and HEAVY (JERSEY) fabrics actually present on the market. - MAXIMUM PRECISION / ACCURACY in the sewing made always in the space existing

between the selvedge of the fabric and the "holes" of the pin chain of the stenter frame granting in this way the ABSENCE of any extra fabric's WASTAGE by bag sewing operation.

- NO FRICTION on the fabric durign the closing in tubular form that allows to work very light

products as VISCOSE, ACETATE, POLYAMIDE etc without any MARK on the fabric. - The SEAM can be done using POLYESTER or as alternative VISCOSE thread WITHOUT

any adjustment on the sewing head - Minimum OPERATING COSTS thanks to the installation on the machine of motors and

drivers at “low power consumption" - Fast RETURN OF THE INVESTMENT - OVER 350 machines sold in the World in the latest 15 years are a GUARANTEE of

QUALITY and RELIABILITY of the machine mod. 2190. An option to complete the supply is the UNSTITCHING DEVICE (mod. 180 NEW): fitted and synchronized with "rope opening / slitting line", it “unstitches/dethreads” the seam in order to re-open the fabric for the following textile finishing operations. NOVELTY: SPECIAL VERSION FOR THE FOLDING AND STITCHING OF POLYESTER AND NYLON FOR THE PREPARATION TO DYEING IN JET MACHINE

Monti Mac Page 18

Mod. CAT301 - PATENT PENDING

AUTOMATIC machine for the end wise joining seam of TUBULAR KNITTED fabrics in order to prepare it to the next textile finishing processes. Thanks to the PATENTED system of job, the use of the machine CAT301 grants a strong improvement of the PRODUCTIVITY of the worker and the QUALITY of the stitch done in comparison with standard system of job used till now. An improvement of the QUALITY of the seam done means: - STRAIGHT SEAM: STRAIGHT SEAM grants in the absence of FOLDS across every joining

seam during the follow textile process. - SEAM WITH DROP NEEDLE / STITCH ALIGNED: a DROP NEEDLE / STITCH ALIGNED

across every seam, grants the best performances by the SLITTING MACHINE improving on the quality and the productivity of the Entire Process.

- SEWING Over Lock: over lock sewing is done in 2 or 3 Wire, ideal for the entire finishing

process later. - SEWING OPEN / CLOSED: CLOSED the stitching may be at the end of the seam of the tube

or PARTIALLY OPEN by simply turning a selector switch on the machine.

Monti Mac Page 19

- CUTTING SEWING with the wire in AUTOMATIC: at the beginning and end of the seam runs the thread trimming sewing machine and the aspiration of tissue CUT during the execution of the seam with the deposit in a special collecting box.

The sewing unit AUTOMATIC CAT301 can get the fabric SMALL ROLLS (Weight 20/25kg) in BIG ROLLS (Weight 80/100kg), in pallets or in CASSONI FALDATI. In the case of LARGE ROLLS is possible the installation of a UPS SHIPPING AUTOMATIC ROLLS at the same position of the operator thus optimizing the entire work cycle in compliance with the accident prevention regulations in force.

Mod. WRITE14 N

New ALPHANUMERIC PRINTER to print out the IDENTITY CODE on FABRICS. The SPECIAL INK USED on the printer is FAST DRY (5 seconds) and it is RESISTANT to all chemical processes on fabrics (singing, bleaching, mercerizing etc) granting always legible the identity code of each single piece during the whole production cycle. Thanks to the presence of 2 tanks on the machine (one for ink and one for solvent), it is possible to CLEAN the printer at the end of each working shift and re-start the day after without any trouble coming by the ink dry in the pipes. By means of different software interfaces, the printer can be logged to the most usefull softwares of the customer. As alternative it can read a bar-code/labels and prints out it on the fabric or also the printer can be managed by own touch-screen on which type the code to print out.

Monti Mac Page 20

WRITE 14N can be supplied with BRACKETS for the installation to TEXTILE MACHINES or with movable STAND ON WHEELS for the installation where requested. When fitted on a GREY FABRIC PREPARATION LINE mod. CA5, PRINTING CYCLE is made SIMULTANEOUSLY with the seam assuring an EXTRA operation that – otherwise – requires an additional time.

Mod. BOR-FAN

TEXTILE DUST and MICRO-DUST SUCTION and FILTERING GROUPS. HIGH filtering performances are obtained by the special FABRIC of the filters, suitable to capture DUSTS and MICRO DUSTS present in any textile mills.

Monti Mac Page 21

Mod. BRUSH

BRUSHING and CLEANING SYSTEMS for grey fabrics. It’s a very important operation which REDUCES significantly the textile DUSTS on the grey fabrics, granting better QUALITY and PRODUCTIVITY in the following operations of singeing, bleaching, mercerizing and finishing. Available different solutions according to the single requirements, with 2 BRUSHES (mod. BRUSH 2S), with 2 BRUSHES + BEATER (mod. BRUSH 2S+B) and with 4 BRUSHES (mod. BRUSH 4S). Each brush is motorized independently and by some adjusting systems it is possible to vary the incidence corner (contact) of the brush on the fabric, obtaining more or less cleaning effect. All brushing groups are equipped with suction cap for the connection with the dusts filtering group (mod. BOR-FAN). AUTOMATIC cleaning of the filters moved by an electronic pressure detector and automatic ejecton of the dust collected by means of a motorized Archimede screw. As alternative the dust collected can be stored in special container with bags and MANUALLY removed. The main FAN is acustically INSULATED and equipped with silencer.

Monti Mac Page 22

Mod. FEEDING

AUTOMATIC ROLL'S HANDLING AND TRANSPORTATION. The automatic ROLL's handling allows to optimize in each production cycle the TRANSPORTATION of product to be worked to every single line, granting in any situation an optimization of each working cycle and avoiding production stops for absence of product to work. The absence of any MANUAL HANDLING of WEIGHTS allows SINGLE WORKER to work on the machine according to the SAFETY RULES actually existing in the World. The extreme versatility of our systems allows to feed any production line and the availability of different constructive solutions allows moving rolls weighing up to450kg without any difficulty.

Monti Mac Page 23

Mod. 1090

GREY FABRIC PREPARATION LINES FOR WOVEN and OPEN WIDTH KNITTED FABRICS.

Monti Mac Page 24

Thanks to its extremely SIMPLE use, these lines are very flexible and suitable for MEDIUM/SMALL productions range or in presence of SPECIAL fabrics/fibers where the automatic machine (model CA5) CANNOT be used. The 1090 line includes "base" machine, that can be completed / set with a series of options that allow to the customer to complete the line as per its personal requirements. There are specific lines for light fabrics, for DENIM, for upholstery fabric, shirting and for KNITTED FABRIC IN OPEN WIDTH.

Each 1090’s line can be completed with a SEWING RAIL mod. TA21 (see END to END seam - chapter number 2) to join the single rolls in work with a STRAIGHT seam of HIGH QUALITY with selvedges well aligned even IN PRESENCE OF OPEN WIDTH KNITTED FABRICS.

Monti Mac Page 25

Mod. R210-3 ORL SUP-EVO10 AUTOMATIC machine of the latest generation for the LONGITUDINAL and BILATERAL HEMMING on TERRY TOWELS. Sewing machine installed is chain stitch, 1 needle, 2 threads. As option it is suitable a chain stitch machine 2 needles, 4 threads. Calibration System of the cloth to hem made by means of an automatic EDGE TRIMMER moved by an optical pile’s reader, that grants a straight and constant width of cloth with the pile. Thanks to the installation on the machine of a new EXPANDABLE HEMMER, it is possible to work TERRY TOWELS from 250gsm up to 1000gsm with and without THICK BORDERS without any trouble and adjustment with the BEST QUALITY required by the market. Standard HEM’s width 1/4 ' – Any other size on request. As option it is possible to install on the machine a LABELLING DEVICE for flat and folded labels in order to attach the labels inside the HEM with the stitch.

Mod. 2074 TEC-09

AUTOMATIC LINE for CROSS CUTTING AND CROSS HEMMING of terry towels.

Monti Mac Page 26

Working cycle provides the fabric feeding to the machine with 1,2, 3 or 4 stripes (according to the width of the fabric to process), AUTOMATIC STRAIGHTENING of the product before cutting cycle, CROSS CUTTING by motorized blade, CROSS HEMMING + CROSS SEWING and unloading of the manufactured towels on a storage belt. Double straightening system of the towel with UPPER and LOWER combs. Chain stitch seam 1 needle, 2 threads, - with automatic stitch CONDENSATION at each corner of the product. As option, it is possible the installation of a LOCK STITCH machines, 1 needle, 2 threads with AUTOMATIC BACK TACKING on each corner with “NO STOP” technology that grants the absence of STOPS in the production cycle for back tacking. The machine with lock stitch sewing heads is also equipped with AUTOMATIC BOBBIN CHANGER at the end of the thread on the bobbin in work. The machine is suitable for the installation of LABELLING DEVICE in order to attach FLAT, FOLDED, BAR CODE and “German type” – HANGER in the desired position on the towels in work up to a maximum of 3 labels per side. Possibility to install 2 additional LOCK STITCH sewing machines in combined cycle with CHAIN stitch sewing machines for BACK TACKING of the towels’ corner automatically, always with NO STOP system, that does not stop the product in work. Possibility of working up to 4 strips of product at the same time (depending on the single width) to optimize the production of the whole line.

Monti Mac Page 27

Mod. 325 - PATENTED

The machine mod. 325 automatically TRIMS OUT the "FALSE SELVEDGES" - "FRINGES/THREADS" present on the edges of open end’s fabrics by means of SPECIAL HIGH EFFICIENT CUTTERS moved by SPECIAL READING CAMERAS and SOFTWARE

permitting to set with precision the size of the FRINGE left on each edge of the fabric in order to work it on DIGITAL PRINTING MACHINES without any trouble. Using machine mod. 325 the most important BENEFITS for DIGITAL PRINTING are the follows: - Removing of any TROUBLE that comes by the presence on the edges of the fabric of LONG

FRINGES and THREADS (better quality for digital printing) - Absence of any kind of DISTORSION of the fabric’s WEFT as it happens with overedging

process (better quality of digital printing) - Absence of edges STRETCHED/DEFORMED by the overedging process (better quality of

digital printing) - Absence of the THICKNESS of the overedging STITCH on the fabric’s edge (better quality

and accuracy of digital printing) - Drastically REDUCTION OF THE COSTS of the preparation to digital printing in comparison

with overedging process for the absence of SEWING MACHINES, SPARE PARTS, THREAD’s CONSUMPTION and MAINTENANCE

Monti Mac Page 28

Mod. R210-SUR J

Automatic machine per the longitudinal OVEREDGING of the fabric's edges for the preparation to DIGITAL PRINTING. The machine makes the ARTIFICIAL SELVEDGE on 2 longitudinal sides of the fabric by means of an overlock machine in order to trim out all or partially the selvedge and optimize in this way the follow DIGITAL PRINTING process. Thanks to the special SET-UP the machine make a stitch very THIN in comparison with all the standards actually available on the market that permit to DIGITAL PRINTING to work with continuity and high definition. The functionament is AUTOMATIC and the operator can adjust the quantity of fabric to trim out for artificial selvedge, the tension of the fabric during the stitching process and any other parmaetr of work by means of a display. Ones trimmed out edge selvedge is removed by means of a vacuum with deposit in a container.

Monti Mac Page 29

Mod. R10-12

AUTOMATIC machine for longitudinal HEMMING of SCARVES, HANDKERCHIEF and NAPKINS.

The machine makes the HEMMING with STITCHING on ONE longitudinal side of the fabric with a LOCK STITCH machine with special set-up for SILK, COTTON and POLIESTER.

Monti Mac Page 30

Special FOLDER of 1,2 or 1,5mm totally HAND MADE. Fabric infeeding is from SMALL ROLL and the EXIT of the product hemmed and stitched is the same SMALL ROLL.

Mod. R210-3

AUTOMATIC line for LONGITUDINAL and bilateral hemming of BED SHEETS, CURTAINS, TABLE CLOTH, NAPKINS etc.

Monti Mac Page 31

Thanks to its modularity, the machine can be manufactured in different version with different sewing heads and working width according to the specific request of each customer. Type of hem as well as its width, can be fix or adjustable according to any specific request. The machine is also equipped with PLC and by mean of push button and touch screen display the operator can adjust any working data of the line and in case of any sudden stop the presence of a touch screen display will assist him during the research of the reason of the stop and restart with the production in a very short time.

2074-3000 AUTOMATIC LINE for CROSS CUTTING AND CROSS HEMMING of BED SHEETS. Working cycle provides the fabric feeding to the machine, CROSS CUTTING at pre-set lemgth by motorized blade, CROSS HEMMING + CROSS SEWING and unloading of the manufactured

products on a storage wagon. Chain stitch seam 1 needle, 2 threads, - with automatic stitch CONDENSATION at each corner of the product. As option, it is possible the installation of a LOCK STITCH machines, 1 needle, 2 threads with AUTOMATIC BACK TACKING on each corner with “NO STOP” technology that grants the absence of STOPS in the production cycle for back tacking. The machine with lock stitch sewing heads is also equipped with AUTOMATIC BOBBIN CHANGER at the end of the thread on the bobbin in work.

Monti Mac Page 32

The machine is suitable for the installation of LABELLING DEVICE in order to attach FLAT and FOLDED labels in the desired position on the product in work up to a maximum of 2 labels per side. Possibility to install 2 additional LOCK STITCH sewing machines in combined cycle with CHAIN stitch sewing machines for BACK TACKING of the products’ corner automatically, always with NO STOP system, that does not stop the product in work.

Monti Mac Page 33

Mod. SAC-AUTO-05

AUTOMATIC MACHINE FOR THE MANUFACTURING OF BAGS and SHOPPING BAGS in different material as cotton, no woven fabrics, jute, net, etc. Automatic working cycle foresees the attachment of the closing rope and hem on the mouth of the bag and than the cross cutting to pre-set size with the other 2 closing seams made with overlock machine at 3-4 or 5 threads. One finished the sewing process, each single bag is unloaded on a stocking belt. As option it is possible complete the machine with a "BAG's REVERSING system" and a LABELLING DEVICE for the attachment of a FLAT label inside the overlock seam. Bag's folding and cross cutting can be managed at pre-set size (with encoder) or as alternative reading a reference mark on the fabric in order to maintain perfectly aligned/centered on the front part of the bag any drawing/logos etc. previously printed on the fabric. The machine is managed with PLC and PC through which the operator can set and adjust any working parameter of the machine. It is also possible SAVE different FILES/WORKING RECIPES in the PC and use these when the working process need a specific set-up already done. In case of a NEW one, it will SAVE at the end of the job in order to be used in the future. Special SET-UP and RECIPE is developed for very slippery fabrics as SATIN.

Monti Mac Page 34

Mod. R210-2 SUR

AUTOMATIC MACHINE FOR THE LONGITUDINAL AND BILATERAL OVEREDGING OF CARPETS, RUNNERS, BATH MAT. Sewing machine overlock at 1 needle 2 threads. On request 3 threads.

Monti Mac Page 35

The sewing head can be installed "head to head" or "displaced" on the base of the minimum working width requested by the machine. The machine is equipped with walkway for an easy acces and set-up of the sewing machines, their threading and by means of a "touch screen" it is possible set any working parameter of the machine as stitch density, speed, tension of the product in work etc. On request electronic counter meter and label printer.

Mod R10PS

AUTOMATIC MACHINE FOR LEAD BAND INSERTION IN THE LONGITUDINAL SIDE OF CURTAINS. Automatic machine with a PATENTED system for the attachment of the LEAD BAND on the fabric in order to be covered totally by the same fabric granting an EXCLUSIVE aspect to the fabric processed. Maximum FLEXIBILITY of the machine that processes with the SAME HIGH QUALITY many

Monti Mac Page 36

different kind of fabrics from heaviest as VELVET / CHENILLE to the lightest as LINEN, TULLE, VOILE, POLYESTER etc.

Mod. R12-4 C

Automatic machine for FAGOTING and PICOETTA edging. Double cloth guiding system for the 2 fabrics to process and automatic thread quality checker to prevent the thread breaking due to the presence of knots on the same threads.

Monti Mac Page 37

AUTOMATIC MACHINE FOR PRODUCTION COUPON FOR EMBROIDERY MACHINE by assembling seam with 1 light fabric (tulle, veil etc..) With a supporting base (acetate or card) and the next to cross CUTTING MEASURE desired.

Monti Mac Page 38

The process of CUT is run by electronic encoder and allows you to set the desired length for mounting the COUPON on the embroidery machine. Minimum length 3m coupons; maximum length of 99 meters length for multiple embroideries. The same machine can be realized with the introduction to 3 rolls of fabric (instead of 2) and work with a special work system that performs a coupling "offset" on the sides which allows the increase of the useful work for mounting on embroidery machine. Special devices ensure the timely control and independent of the voltage of the product in work and the alignment of each sheet with the one below also in the presence of elastic tissues and / or transparent. Operation run entirely by PC and touch screen operator interface.

Mod. R10-GEO

AUTOMATIC SEWING AND BONDING FOR 2 or MORE 'GEOTEXTILES LAYERS OF ARTICLES ON ROLL WITH AUTOMATIC PACKING PRODUCT WORKED. The purpose of the system is to PAIR with a seam 2 products GEOTEXTILES aim being to create a UNIQUE PRODUCT with a height / width resulting from the sum of the two products work well and simplify operations in MASS OPERA WORKS GREAT requiring coverage with GEOTEXTILES of very large spaces. The seam avoids, during the implementation of perform overlapping 70/80cm product with a HUGE ECONOMIC ADVANTAGE resulting from the reduction of the product but used primarily by cost reduction SHIPPING and HANDLING for the implementation of the same. The seam sewn depends on the type of product and may be at work in August 1 or 2 needles of the required strength. The product sewing may be polyester or polypropylene of weight up to 850 grams per square meter and a thickness of 4mm each. The line is available in two different versions:

Monti Mac Page 39

BASE: with a maximum height of the product up to 3000mm WIDE: with a maximum height of 5400mm Product

Mod. TF-5000 CARPET

Monti Mac Page 40

AUTOMATIC SLITTING machine for longitudinal cutting of TUFTING CARPETS with INDEPENDENT CUTTING GROUPS and OWN reading CAMERAS. Each cutting group is equipped with own CAMERA that reads the position of the reference mark

printed on the carpet maintaining always the cutter well aligned with cutting line. Electronic functionament with software and PC for the adjustment of the working parametrs of the cameras. On the 2 edges, the machine has got 2 selvedge TRIMMERS with mechanical edge remover in order to unload a product by the machine READY for the next step of OVEREDGING. Working width up to 5000mm. Number of cutter as per customer's request (8/9/10 up to 13 pieces already installed) The most recommanded type of installation is at the EXIT of BACK COATING LINE. As alternative the machine can be installed in a version STAND ALONE.

Monti Mac Page 41

Mod. TF 3600 TERRY TOWEL

AUTOMATIC SLITTING machine for LONGITUDINAL CUTTING of TERRY TOWEL.

Cutting cycle by means of circular and motorized blade with INDEPENDENT shifting movement that grants the EXACT following of the position of the TERRY's PILE during the cutting operation. The guiding system of each cutting head is made by mean of OPTICAL DEVICES suitable to read ANY KIND of TERRY TOWEL in work from the lighter (300/350gsm) up to the heaviest (800/1000gsm) without any sort of trouble. Maximum working speed of the machine up to 40 meters per minute.

Monti Mac Page 42

Mod. TF 200 SCARVES

Automatic machine for LONGITUDINAL CUTTING of NATURAL and SYNTHETIC fabrics with COLD and HOT blades The model (TF 200 COLD) with multiple cutting heads, is developed for the longitudinal cutting of NATURAL FABRICS as COTTON, WOOL, JUTE etc.

Thanks to the very compact cutting heads, it is granted a minimum width of each stripe up to 120mm. As alternative the model (TF 200 HOT) with mulitple cutting heads is developed for the longitudinal cutting of SYNTHETIC FABRICS as POLYESTER and BLENDS. Thanks to the control of the temperature of each cutter installed, it is possible to cut perfectly any syntethic fabrics with welding of the 2 sides but WITHOUT any burning of the same due to uncontrolled temperature. The fabric's stripes at the exit of the cutting systems are ROLLED up on paper core for the next working process. In case of very NARROW stripes it is possible to ROLL UP the stripes on 2 different rolls at shifted layers in order to separate on each paper core one narrow stripe by the closed one.

Monti Mac Page 43

Mod. T.T.A. 200 – TUF

Automatic machine for CROSS CUTTING of TUFTED CARPETS, TECNICAL TEXTILES, AUTOMOTIVE, KEVLAR, COATED FABRICS, FIBER GLASS etc. Special model for TERRY TOWEL and BED SHEETS. Cutting system at PRE-SET size (length) as well as reading a REFERENCE MARK on the product with automatic straightening of the product before cutting cycle. Cutting system by mean of motorized blade or as alternative guillottine blade (only for special application). Storage of the product cut on conveyor belt as well as on platform with pallet. Possibilty to study different solution according to the specific product to cut.

Monti Mac Page 44

Sole Agent MONTI MAC in Indonesia :

PT. DHARMATEK BERKAT UTAMA Bukit Cimanggu City Blok G3 No. 6, Bogor 16166 Phone : +62 251 7536 757, 08281 7097 115 Fax : +62 251 7536 744 Email : sales@dharmatek.co.id and info@dharmatek.co.id