Welding OnSite Support Catalogue 2012v1

8/11/2019 Welding OnSite Support Catalogue 2012v1

http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 1/22

ONSITE SUPPORT

WELDING

OnSite Support make available all the products and machinery your

operatives require to fabricate metal, including the control gear for oxy-fuel

welding and cutting. No site, after all, excludes the necessity for welding,

where even a concrete frame will require the skills of a welder to reinforce it.What sets us apart is the quality of our technical support. Our in-house team

of experienced engineers will offer guidance and make on-site visits if required

to ensure that a job is conducted effectively and without undue hazard.

WE L DI N G


http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 2/22e [email protected] t 0800 781 9765 f 0845 330 1373286 W E L D I N G

Precision layer wound MIG welding

wire, manufactured to BS2901 - A18

spec, on plastic reels. Moisture Sealed.

• Quality checked and moistureprotective packaging

Code Description

WMM08 0.8mm, 15kg Reel



XTL WELD MIG WIRE A18

Steel wound liners for steel MIG wires,

to carry the wire through the torch cable.

• 0.6-0.8mm blue, 1.0-1.2mm red

Code Description

WMTLSB 0.6 - 0 .8mm, 3m

WMTLSB 0.6 - 0 .8mm, 4m

WMTLSB 0.6 - 0 .8mm, 5m

WMTLSR 1.0 - 1 .2mm, 3m

WMTLSR 1.0 - 1 .2mm, 4m

WMTLSR 1.0 - 1 .2mm, 5m

316 stainless wire, precision wound

on basket reels. The common

stainless grade, with good corrosionand pitting resistance.

• All other stainless grades available

Code Description

WMS316 0.8mm, 15kg Reel

WMS316 1.0mm, 15kg Reel

316 MIG WIRE

MB50 500AMP MIG TORCH

Code Description

WMT3603 360Amp 3m Complete



WMT23 M6 Tip 0.8, 1.0, 1.2, 1.6mm

WMT34 M8 Tip 0.8, 1.0, 1.2, 1.6mm

Code Description

WMT36TA-S M6 Tip Adaptor


WMT36GD-1 Gas Distributor

WMT36SShrouds, Conical,Taper or Straight



MIG TORCH LINER STEEL

Bestselling 250Amp MIG torch and consumable parts, lightweight and flexible.

Industry standard euro connection and flexible cable.

• Fits MB 25 250A lightweight MIG torch

BEST

SELLER

Code Description




WMT23 M6 Tip 0.8 , 1 .0 , 1.2 , 1.6mm

WMT34 M8 Tip 0.8 , 1 .0 , 1.2 , 1.6mm

Code Description


WMT25TA-M8 M8 Tip Adaptor

WMT25SS Shroud Spring

WMT25SShrouds, Conical,Taper or Straight

Industry standard MIG torch and consumable parts,

300Amp @ 60%, widely used for general structural

work and medium fabrication.

• Medium duty aircooled torch

Powerful watercooled MIG torch, 430Amp @

100%, ideal for heavy fabrications, beamwork,

flanges etc. Ergonomic handle design.

• Heavy duty watercooled torch

Code Description

WMT5W03 500Amp 3m Complete

WMT5W04 500Amp 4m Complete

WMT34 M8 Tips 0.8, 1 .0 , 1 .2 , 1.6mm

WMT5TWA 501 Tip Adaptor

WMT5W-GD 501 Gas Distributor

WMT5WS 501 Shroud Conical, Taper or Straight


http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 3/22Visit our website on www.onsite-support.co ONSITE SUPPORT 287

WE L DI N G

Protect and enhance torch tip and

shroud life with this anti-spatter paste.

Non-toxic and safe, it allows better

welding by keeping the torch cleaner.

• 450g tin of tip dip paste

Code Description

WSRTD45 450g Tin

TIP DIP PASTE

Widely used, waterbased anti-spatter

spray in 450ml aerosol form. Spray onto

workpiece to stop spatter sticking during

MIG welding.

• Oil and silicone free

Code Description

WSRSA 450ml

SPATTER RELEASE AEROSOL

Effective and economical, refillable

antispatter. Trigger spray is refilled from

larger sizes. Oil and silicon free.

• Reduce paint & galvanising problems

Code Description

WSRB25 25ltr

WSRB5 5ltr

WSRTS 500ml

SPATTER RELEASE BULK

Hardfacing MIG wire for high impact/

abrasion applications eg. Plant hire,

piling, bucket repair, etc.

• 1.2mm 15kg

Code Description

WMF60 1.0mm, 15kg Reel

WMF60 1.2mm, 15kg Reel

HARD FACING MIG WIRE

Lincoln Innershield flux cored wire

designed for site welding from

wirefeeder/generator set ups.

• NR232 for multiple passheavy welding

Code Description

WMM232 1.7mm, 11.35kg Reel




INNERSHIELD WIRE NR232

Specially developed welders pliers

featuring sidecutters for wire, special

slots for hot tip and shroud removal and

cleaning splines for removing spatter

from inside shrouds.

• Essential tool for MIG welders

Code Description

WMP25 250Amp

WMP36 360Amp

MIG PLIERS

LINKED PRODUCTS

Pro Welding Gauntlets

with carpel wrist support,

see page 173

LINKED PRODUCTS

Fristads Flame Retardant

Kneepad Trousers,

see page 45

LINKED PRODUCTS

Industrial Angle Grinders,

see page 120



600HB Hardfacing rod for wear resistant

surfacing of steels that are subjected to

abrasion and metal-to-metal wear.

• High strength

Code Description

WEHF425 2.5mm, 5kg Packet




HARD FACING ELECTRODES

High strength rod with good crack

resistance. Hugely versatile for joining

different or unknown materials.

• 29/9 Spec, 312 Stainless

Code Description

WEDS65 2.0mm, 4.0kg Packet




DISSIMILAR RODS

Mild steel general use 6013 rod for a

wide range of mild steel fabrication

applications. Excellent for overhead work.

• Fincord M is still a welders favorite

Code Description

WEMSFM 2.5 x 350mm, 12.3kg Carton




FINCORD M

Rutile covered high performance

electrode with 180% weld metal

recovery and high deposition rate.

• E7024 Iron powder

Code Description

WEI-M180 3.2 x 450mm, 21.6kg Carton



MULTIFER 180 RODS

Very popular top quality rods with

widely used weld procedures.

Ideal for structural welding.

• E7018-4-H4R Sahara ready pack

Code Description

WELHC49 2.5 x 350mm, 16kg Carton



WELHC49 5.0 x 450mm, 20.8kg Carton

CONARC 49C SRP RODS

A quality range of different sized

electrode ovens are available, small,

medium and large. Dual voltage.

• Adjustable thermostat

Code Description

WAEDO Dual Voltage, 14kg

WAEDO Dual Vo ltage, 136kg

ELECTRODE DRYING OVEN

150w heated electrode dispenser

for keeping rods at a steady 80-100°C

prior to welding.

• 5kg capacity

• Dual voltage 110/230 Volt

Code Description

WAEQH Dual Voltage

ELECTRODE QUIVER

6103 electrode with exceptional

weldability in all positions except vertical

down. Soft arc and minimal spatter.

• Bestseller for general mild steel

Code Description

WEM-SUM 2.5 x 350mm, 20.4kg Carton




6013 SUM ELECTRODESLINKED PRODUCTS

For angle grinders,

see page 120



WE L DI N G

Cellulosic electrode for pipe welding in

the vertical down position, particularly

recommended for welding root passes.

• Supplied in metal tin

Code Description

WEMSN5 2.5mm - 20kg Tin



6010 ELECTRODE

Mild steel electrode with great usability

in all positions, ideal for gap bridging and

striking in rusty or rough areas.

• E6013 Rutile rod – mild steel

Code Description

WEM-BL 3.2 x 350mm, 20.0kg Carton



PHOENIX BLAU 30

Double coated easy restrike 7018

electrode for high strength welding

applications. Standard pack.

• E7018-1H4R spec, low hydrogen

Code Description

WELH-EV50 2.5 x 350mm, 16.8kg Carton




BOHLER FOX EV50

Double coated easy restrike 7018

electrode for high strength welding

applications. Aluminium vacuum pack.

• E7018-1H4R spec, low hydrogen

Code Description





BOHLER FOX EV50 VAC PAC

A well priced 316L rod for

pharmaceutical, food and hygiene

applications. All sizes available.

• Bestselling 316 stainless rod

Code Description

WESS63 2.0mm, 4.0kg Packet




316 STAINLESS STEEL

Quality Ni-Fe rod for high strength cast

joining or surfacing. Often used to join

cast iron to mild steel.

• Moisture resistant packaging

Code Description

WECAST70 2.5mm, 1kg Packet




CAST ELECTRODES NiFe

For use on all types of cast iron, giving

a good, fully machinable weld deposit.

Moisture resistant packaging.

• Handy 1kg site packs

• 20kg cartons available

Code Description





CAST ELECTRODES – PURE NICKEL

This low hydrogen rod is very

popular where top quality welds

are required and welding arc

characteristics are vital.

• Very popular top quality 7016

Code Description

WELH 3.2 x 350mm, 16.4kg Carton



COMET J50N

Different types of quality welders

chipping hammer for slag removal after

MMA and flux cored welding.

• Hardened head with dual point

Code Description

WACH01 Metal Tube Handle

WACH02 Spring Handle

WACH03 Wooden Handle

WELD CHIPPING HAMMER



Heavy duty welding spec copper cable,

securely fitted to industrial crocodile

earth lead and cable plugs.

• Robust well made weldingearth leads

Code Description

WCEL5M 25mm, 200Amp, 5m




WELDING EARTH LEAD

Heavy duty twist type electrode

holders for quick rod changes and

secure grip.

• Supplied with hex keyand tting kit

Code Description

WAEHT40 400Amp

WAEHT60 600Amp

TWIST TYPE ELECTRODE HOLDER

Heavy duty weld leads with PVC rubber

sheathing over copper cable, fitted with

plug and electrode holder.

• All other lengths made to order

Code Description

WCWL5M 25mm, 200Amp, 5m




WELDING LEAD

Dinz type cable female sockets for

machine connection welding, earth

and extension leads.

• Easy to t and replace

• Other sizes available

Code Description

WCAS09 16 - 25mm Sq, 150-200Amp

WCAS13 35 - 50mm Sq, 200-400Amp

WCAS15 50 - 70mm Sq, 400-600Amp

WCAS19 70 - 95mm Sq, 600Amp+

WELDING CABLE SOCKET

Dinz type cable male plugs for

machine connection welding, earth

and extension leads.

• Easy to t and replace

Code Description

WCAP09 16 - 25mm Sq, 150-200Amp

WCAP13 35 - 50mm Sq, 200-400Amp

WCAP15 50 - 70mm Sq, 400-600Amp

WCAP19 70 - 95mm Sq, 600Amp+

WELDING CABLE PLUG

Heavy duty welding spec copper cable,

sold on the reel in 50 or 100m coils.

• Cut to length service on request

Code Description

WCPC25 25mm Sq, 200Amp





WELDING CABLE

Standard replacement earth clamps to fit

onto all weld earth leads. Powerful jaw

grip for superior earth.

• Stong grip and replaceable ttings

Code Description

WAEC400 400Amp

EARTH CLAMP – CROC

Standard replacement earth clamp, with

a powerful jaw grip for superior earth.

• Long life

• Powerful grip

Code Description

WAES600 600Amp

SCREW TYPE EARTH CLAMP

Weld extension leads, fitted with dinz

type cable plug and socket, with welding

spec copper cable.

• All other lengths made to order

Code Description

WCEX 25mm, 200Amp, 15m Cable




WELD EXTENSION LEADS



WE L DI N G

These small collets fit the WP9 and

WP20 Torch and fit inside the collet

body to clamp onto the tungsten.

• 25mm long

Code Description

WTT13N21 1.0mm

WTT13N22 1.6mm

WTT13N23 2.4mm

WTT13N24 3.2mm

The small collet body fits the WP9 and

WP20 series torches, and holds external

threads for the ceramic and the back cap.

• 21mm long

Code Description

WTT13N26 1.0mm

WTT13N27 1.6mm

WTT13N28 2.4mm

WTT13N29 3.2mm

The small ceramic fits the WP9 and

WP20 series TIG Torches and controls

the shielding gas to the weld pool.

• 30mm long

Code Description

WTT13N08 6.0mm Bore

WTT13N09 8.0mm Bore

WTT13N10 10mm Bore

WTT13N12 12mm Bore

WTT13N13 16mm Bore

Small aircooled TIG torch – 125Amp.

• Flexneck torches and torchbodies available

Code Description

WTTWP9-12SSWP9 Package12ft switched and sheathed

WTTWP9-25SSWP9 Package25ft switched and sheathed

WTTWP9 WP9 Torch Body

WP9 TIG TORCH

SMALL COLLETS

The long ceramic is ideal for tight access

applications where good shielding gas

control is essential.

• 48mm long

Code Description

WTT796F70 5.0mm Bore



WTT796F73 10mm Bore

SMALL LONG CERAMICS

Small watercooled TIG torch – 250Amp.


Code Description

WTTWP20-12SSWP20 12ft Packageswitched and sheathed

WTTWP20-25SSWP20 25ft Packageswitched and sheathed


WP20 TIG TORCH

SMALL COLLET BODIES

These back caps fit the WP9 and 20

series TIG torches and control the length

of tungsten welding electrode.

• Thread diameter 7.8mm

Code Description

WTT41V33 Short Back Cap

WTT41V35 Medium Back Cap

WTT41V24 Long Back Cap

SMALL BACK CAPS

SMALL CERAMICS

High performance regulator for argon,

argon-mix, and similar inert shielding

gases for welding. Gauges show bottle

contents and flow rate.

• Fits all standard cylinders

Code Description

WGRSG-2 Single Stage 2 Gauge

ARGON REGULATOR

Fit to argon regulators to provide greater

control of shielding.

• Ideal for MIG and TIG use

Code Description

WGRFM Argon Flowmeter

ARGON FLOWMETER



Suitable for joining 18/8 (304) austenitic

stainless steels providing good corrosion

and wear resistance.

• All diameters available to order

Code DescriptionWTS308-16 1.6mm, 5kg Pack

WTS308-24 2.4mm, 5kg Pack

STAINLESS TIG RODS 308L

Large aircooled TIG torch – 150Amp.


Code Description

WTTWP17-12SSWP17 Torch Package12ft switched and sheathed



WP17 TIG TORCH

Large watercooled TIG torch – 350Amp.


Code Description




WP18 TIG TORCH

Large aircooled TIG torch – 200Amp.


Code Description

WTTWP26-12SSWP26 12ft PackageSwitched and sheathed

WTTWP26-25SSWP26 25ft PackageSwitched and sheathed


WP26 TIG TORCH

These large collets fit the WP17, WP18,

and WP26 torch and fit inside the collet

body to clamp onto the tungsten.

• 50mm long

Code Description

WTT10N22 1.0mm

WTT10N23 1.6mm

WTT10N24 2.4mm

WTT10N25 3.2mm

WTT54N20 4.0mm

The large collet body fits the WP17,

WP18 and WP26 series torches, and

holds external threads for the ceramic

and the back cap.

• 47mm long

Code Description

WTT10N30 1.0mm

WTT10N31 1.6mm

WTT10N32 2.4mm

WTT10N28 3.2mm

WTT406488 4.0mm

LARGE COLLETS LARGE COLLET BODIES LARGE CERAMICS

The long ceramic is ideal for tight access

applications where good shielding gas

control is essential – fits the larger torches.

• Ideal for tight access corners

Code Description

WTT10N47L 5.0mm Bore



LARGE LONG CERAMICS – 76MM

These back caps fit the WP17, WP18,

WP26 series TIG torches and control the

length of tungsten welding electrode.

• Thread diameter 9.3mm

Code Description

WTT57Y02 Long Back Cap

WTT57Y04 Short Back Cap

LARGE BACK CAPS

The large ceramic fits the WP17, WP18,

and WP26 series TIG torches and

controls the shielding gas to the weld

pool.

• 47mm long

Code Description

WTT10N50 6.0mm Bore

WTT10N49 8.0mm Bore

WTT10N47 11mm Bore

WTT10N46 13mm Bore

WTT10N45 16mm Bore



WE L DI N G

Good for hard to weld materials, and

dissimilar materials.

• 29/9 grade


Code Description







Quality 316L welding wire – standard for

many critical food, pharmaceutical and

hygiene applications.

• Certicates of conformity available

Code Description







2% Thoriated (red tip) tungstens for

stainless and mild steel.

• Handy dispenser – Pk10

Code Description

WTUT16 1.6 x 150mm

WTUT24 2.4 x 150mm

WTUT32 3.2 x 150mm

WTUT40 4.0 x 150mm

TUNGSTENS 2% THORIATED

Zirconiated (white tip) tungstens

for aluminium welding. Positive arc

striking characteristics.


Code Description

WTUZ16 1.6 x 150mm

WTUZ24 2.4 x 150mm

WTUZ32 3.2 x 150mm

WTUZ40 4.0 x 150mm

WTUZ48 4.8 x 150mm

TUNGSTENS ZIRCONIATED

Ceriated (grey tip) tungstens for TIG

welding all common metals including

mild and stainless steel and aluminium.


Code Description

WTUC16 1.6 x 150mm

WTUC24 2.4 x 150mm

WTUC32 3.2 x 150mm

WTUC40 4.0 x 150mm

TUNGSTENS CERIATED

4043 spec TIG wire with 5% silicon -

ideal for general ali welding.

• Packed in 2.5kg plastic tubes

Code Description

WTA4043-16 1.6mm, 2.5kg

WTA4043-24 2.4mm, 2.5kg

WTA4043-32 3.2mm, 2.5kg

ALUMINIUM TIG RODS 4043A

5356 spec TIG wire with 5% magnesium.

• Packed in 2.5kg plastic tubes

Code Description

WTA5356-16 1.6mm, 2.5kg

WTA5356-24 2.4mm, 2.5kg

WTA5356-32 3.2mm, 2.5kg

ALUMINIUM TIG RODS 5356

Niobium stabilised stainless steel rod

prevents weld decay and offers excellent

corrosion resistance.

• 19.9NB


Code Description







A15 triple-deoxidised copper coated TIG

wire for precision welding of all mild steel.

• Handy 5kg plastic tube packs

Code Description

WTMA15-10 1.0mm, 5kg Pack





MILD STEEL TIG RODS A15



Cadmium free silver solder, 55% silver.

Free from highly toxic cadmium to

conform with COSSH requirements.

• Low temperature melting range(630-660oC)

Code Description

WSBAG14 1.5 x 500mm, 1kg Pack

WSBAG14-10 1.5 x 500mm, 10 Rod Pack

SILVER SOLDER

Famous Johnston Matthey silver

brazing flux powder. Generally soluble

in hot water.

• 500G tub

Code Description

WSF500 500g

SILVER SOLDER FLUX

Complete gas kit with plugged (no gauge)

regulators, hoses, flashback arrestors, 18”

cutting torch, nozzles, lighter, and spanner.

• 10mm diameter industrial hoses

Code Description

WGCK10A-PLG 10m Oxy/Acetylene

WGCK20A-PLG 20m Oxy/Acetylene

WGCK10P-PLG 10m Oxy/Propane

WGCK20P-PLG 20m Oxy/Propane

PLUGGED GAS CUTTING KITS

Complete Oxy/Acetylene kit with 2 gauge

regulators, hoses, flashback arrestors, 18”

cutting torch, nozzles, lighter, and spanner.

• 10mm diameter industrial Hoses

Code Description

WGCK10A-2G 10m Hoses

WGCK20A-2G 20m Hoses

Contains shank, cutting attachment, mixer,

size 1-13 nozzles, nozzle cleaners, 2 cuttingnozzles, regulators, flashback arrestors,

and spark lighter.

• Oxy/Acetylene kit supplied in kitcase

Code Description

WGCKA-2G-T4 4m Hoses

Contains shank, cutting attachment,

mixer, size 1-13 nozzles, nozzle

cleaners, 2 cutting nozzles, regulators,

flashback arrestors, and spark lighter,

goggles, and portapack bottle trolley.

• Oxy/Acetylene kit supplied boxed

Code Description

WGCKA-2G-PKIT 5m Hoses

2 GAUGE GAS CUTTING KIT CUTTING AND WELDING KIT CUTTING AND WELDING KIT

Precision engineered single stage

regulators. Accurate outlet

adjustment knob, outlet gauge,

and bottle contents gauge.

• BS EN150 2503 spec

Code Description

WGROX-2 Oxygen 2 Gauge

WGRAC-2 Acety lene 2 Gauge

SINGLE STAGE REGULATOR

No gauge design makes these

regulators ideal for site work and mobile

use. Pressure is set by markings around

adjustment knob.

• BS EN150 2503 spec

• Fits all standard cylinders

Code Description

WGROX-P Oxygen

WGRAC-P Acetylene

WGRPP Propane

PLUGGED REGULATOR

2 Stage design means better accuracy

and life than standard regulators.

Twin diaghram for greater gas control.

• Twin diaphragm design

• Oxygen, Acetylene & Argon

Code Description

WGRMAC-2 Acetylene 2 Gauge

WGRMO-2 Oxygen 2 Gauge

MULTI STAGE REGULATOR



WE L DI N G

Straight line track mounted gas cutting

machine, ideal for plate cutting on

workshop or site. Supplied with 1 x

1.8m track, and more can be joined.

• Cuts and bevels 5-50mm thick plate

Code Description

WPGASLC 110 Volt, 1.8m Track

STRAIGHT LINE GAS CUTTER

Well-balanced cutting torch madeto BS6503. Use with a range of

nozzles to cut mild steel. Secure grip

handle, pressure adjustment valves,

and cutting lever.

• Longer lengths up to1.5m available

Code Description

WGT1890 18”, 90 Degree



CUTTING TORCH

Heavy duty Oxy/Acetylene cutting

nozzles to use with nozzle mix torch.See cutting chart for cut capacity.

• Cuts from thin plate to 300mm

Code Description

WGNANM-132 1/32”, Up To 6mm Cut






CUTTING NOZZLE OXY/ACET

Heavy duty Oxy/Propane cutting nozzles

to use with nozzle mix torch. See cuttingchart for cut capacity.

• Cuts from thin plate to 300mm

Code Description

WGNPNM-132 1/32”, Up To 6mm Cut






CUTTING NOZZLE OXY/PROP

Track type pipe cutter - smooth gear-driven action. Cuts on pipes up to 4ft

with 2.4m chain supplied.

• Cuts and bevels (5-50mm wall)pipe and tube

Code Description

WPGAPC Up to 4ft

MANUAL PIPE GAS CUTTER

Professional quality injection torches,

for Oxy/Propane cutting. Powerful and

economical to use. Greatly improved

gas consumption.

• Wide range of nozzles available

Code Description

WGTINJ18 18” 450mm

HARRIS INJECTOR TORCH

Harris nozzles use a special injection

system to give incredible speed and

economy, especially on Oxy/Propane.

• Greatly improved gas consumption

Code Description

WGN6290 1, 2, 3, 4, 5NFF available

HARRIS CUTTING NOZZLE

600mm long powerful propane torches

for general purpose burning, heating,

and preheating for welders. 5m Hose.

• Ideal for preheating and burning

Code Description

HPROT5M 600mm, 1 Head

PROPANE HEATING TORCH

LINKED PRODUCTS

Eye protection for gas

cutting, see page 156



Industrial multi-function torch that can weld

mild steel up to 1”, cut up to 6” and can be

used for heating and flame washing.

• Fully adjustable

Code Description

WGT4SH Shank

WGT4CA Cutting Attachment

WGT4MA Acety lene Mixer

WGT4 Range of Nozzles

TYPE 4/5 KIT

Powerful arc air gouging torch with

straight head design. Ideal for weld crack

or defect removal, plant repairs etc.

• 6ft package c/w lead and air hose

Code Description

WGGT600 600A torch 6ft complete

WGGT1200 1200A torch 6ft complete

GOUGING TORCH

Ideal for weld crack or defect removal,

plant repairs etc. Carbon/graphite blend.

• Clean efcient gougingin most metals

Code Description

WGGC06 6 x 305mm, Pk100

WGGC08 8 x 305mm, Pk100

WGGC10 10 x 305mm, Pk100

WGGC13 13 x 305mm, Pk100

GOUGING CARBONS

Strong one-piece cylinder key for

opening or closing all standard UK

cylinders. Drop forged.

• Full range of nozzles available

Code Description

WGACK Cylinder Key

CYLINDER KEY

Heating neck and nozzles for oxy/

acetylene use with the Type 4 system.

Ideal for a wide range of applications.

• For Oxy/Acetylene use

Code Description

WGNAO25 AHT25

WGNA050 AHT50

WGNA100 AHT100

HEATING NECK AND NOZZLES

High quality hose sets fitted with 3/8”

BSP connectors and hose check valves.

Red coded for Acetylene.

• Fully Compliant toBS EN559 Spec

Code Description

WGHA10 10mm x 5m

WGHA10 10mm x 10m

WGHA10 10mm x 20m

WGHA10 10mm x 30m

ACETYLENE HOSE



Blue coded for Oxygen.


Code Description

WGHO10 10mm x 5m

WGHO10 10mm x 10m

WGHO10 10mm x 20m

WGHO10 10mm x 30m

OXYGEN HOSE



Orange colour coded for propane.


Code Description

WGHP10 10mm x 5m

WGHP10 10mm x 10m

WGHP10 10mm x 20m

WGHP10 10mm x 30m

PROPANE HOSE

Y Piece with valves for splitting another

set of hoses off. Widely used in TIG

welding to give one torch gas line andone purging gas line.

• 3/8” BSP standard ttings

Code Description

WGBYV-R RH Thread for Oxygen and Argon

WGBYV-LLH Thread for Acetylene andPropane

Y PIECE WITH VALVE



WE L DI N G

• a

Handy cased set of reamers and a file for

cleaning and unblocking cutting nozzles.

• Metal case

Code Description

WGANC Nozzle Cleaner Kit

NOZZLE CLEANER KIT

Features include flame arrestor, filter

and thermal cut-off valve. Will auto-reset

from minor flashbacks.

• Economical auto reset ashback

Code Description

WGFBRM-O Oxygen

WGFBRM-F Acetylene or Propane

INLINE FLASHBACK ARRESTOR

Industrial O-Clips for crimping over the

end of hose tails, splicers etc.

• WGCBOC-18 ts 10mm dia hose

Code Description

WGBOC 5/16” – 7 -9mm

WGBOC 7/16" – 9 -11mm

WGBOC 1/2” - 11-13mm

WGBOC 9/16" – 13 -15mm

WGBOC 19/32" – 15 -17mm

WGBOC 5/8" – 15 -18mm

WGBOC 3/4" – 17 -20mm

HOSE O CLIPS

Hose splicers for joining hose. Use with

O-clips. Threaded couplers available.

• Range of sizes available

Code Description

BHRC6-6 10-10mm

HOSE SPLICERS

Ideal for making up new hoses. Useful

for hose repair work.

• High leverage design

Code Description

WGBOC-PLR O Clip pliers

O-CLIP PINCERS

Reliable spark lighters for safe and easy

ignition of gas torches. 3 flint design for

quick, easy changing of flints.

• Replacement spark ints available

Code Description

WGAL3 3 Flint

WGALSF Spare Flints

GAS SPARK LIGHTERS

Resettable flashback arrestor. Includes

flame trap, flame arrestor, resettable

automatic cut-off valve, non return valve

and filter.

• Heavy duty ashback

Code Description

WGFBRS-O Oxygen

WGFBRS-F Acetylene or Propane

RESETTABLE FLASHBACK

Sturdy gas trolley, welded connections

and large wheels for easy site use.

• Full range available, design varies

Code Description

WGATOP Oxy/Propane Large Trolley

WGATOA Oxy/Acetylene Large Trolley

GAS BOTTLE TROLLEY

Strong drop-forged spanner and cylinder

key for hose nuts, regulator nuts and

opening or closing of gas bottles.

• Standard euro sizes

Code Description

WGACS Bottle Spanner/Key

BOTTLE SPANNER AND KEY



250Amp 230 Volt 32Amp

supply, compact MIG welder,

21 step settings, supplied

with 3M MB25 torch, earth

lead and regulator.

• 2 year warranty

• 21 step settings

Code Description

WPR-CMIG250 230 Volt

250AMP 230 VOLT COMPACT MIG WELDER

Specification

Power Output 250Amp

Duty Cycle 40%

Input voltage 230 Volt

Height 900mm

Width 440mm

Length 750mm

Weight 85kg

The Powertec 305 has been

built as multipurpose unit for

all medium construction and

fabrication tasks.

• 3 year warranty

• 4 roll pro wire feed

Code Description

WPL-MIGAC-3054 415 Volt


Specification

Power Output 300Amp

Duty Cycle 35%


Height 810mm

Width 467mm

Length 930mm

Weight 95kg

Designed to work perfectly

with the Lincoln Ranger and

Vantage machines, the robust

LN25 feeder is widely used

by site fabricators, fitters, on

many different applications.

• Takes the full range ofInnershield, gasless andstandard wires

• 3 year warranty

Code Description

WPL-LN25 Feeder

SITE MIG FEEDER

Specification

Wire feed

speed

1.27-17.8

M/Min

Control Voltage 10-110 Volt DC

Wire size range 0.6-2.0mm

Connector Euro type

Height 354mm

Width 188mm

Length 356mm

Weight 17kg

315Amp 415 Volt supply,

compact MIG welder, 21 step

settings, supplied with 3M

MB36 Binzel torch, earth leadand regulator.

• 2 Year warranty

• Ready to weld packages

Code Description

WPR-CMIG315 415 Volt


Specification

Power Output 315Amp

Duty Cycle 40%


Height 900mm

Width 440mm

Length 750mm

Weight 85kg

This incredibly versatile

powersource is capable of

delivering Stick, DC TIG, MMA,

flux-cored, and arc gouging.

• 3 Year Warranty

• Perfect for heavy dutysite welding

Code Description

WPL-MIGMP-V350 415 Volt

INVERTEC V350 PRO INVERTER WELDER

Specification

Power Output 350Amp

Duty Cycle 60%


Height 376mm

Width 338mm

Length 709mm

Weight 38kg

LINKED PRODUCTS

Range of welding helmets,

see pages 148-149



WE L DI N G

315Amp 415 Volt supply

seperate wirefeed unit MIG

welder,

21 step settings, supplied with

3M Binzel torch, earth lead,

5M intercons and regulator.

• 2 year warranty

• Ready to weld package

Code Description

WPR-CMIG315S 415 Volt

315AMP 415 VOLT SWF MIG WELDER

Specification

Power Output 315Amp

Duty Cycle 40%

Input voltage 415v

Height 1300mm

Width 440mm

Length 750mm

Weight 108kg

This high value, high power

MIG welder option delivers

quality weld performance

and high specification.

• 2 year warranty

• Watercooled package

Code Description

WPL-MIGWA-450-S 415 Volt

450AMP 415 VOLT WATERCOOLED MIG WELDER

Specification

Power Output 420Amp

Duty Cycle 40%


Height 1500mm

Width 910mm

Length 1010mm

Weight 162kg

The 380Amp Bester MIG

welder is an industrial aircooled

welding plant used for medium

structural steel welding.

• 2 year warranty

• Industrial transformer

Code Description

WPL-MIGAC-380-S 415 Volt


Specification

Power Output 360Amp

Duty Cycle 40%


Height 1300mm

Width 440mm

Length 750mm

Weight 108kg

This powersource is designed

for high intensity applications

such as offshore or heavy

fabrications.

• 3 year warranty

• Ready to weld package

Code Description

WPL-MIGWA-505-S 415 Volt

500AMP 415 VOLT WATERCOOLED MIG WELDER

Specification

Power Output 500Amp

Duty Cycle 60%


Height 1610mm

Width 300mm

Length 610mm

Weight 170kg

450Amp 415v supply

seperate Wirefeed Unit

MIG Welder for heavy duty

aircooled MIG welding,

supplied with LED meters.

• 2 year warranty

• 30 step settings

Code Description

WPR-CMIG450S 415 Volt


Specification

Power Output 450Amp

Duty Cycle 40%


Height 1300mm

Width 440mm

Length 750mm

Weight 150kg

This unit is a powerful inverter

powersource for premium

MIG and stick applications,

with digital communication.

• 3 year warranty

• Top of the range package

Code Description

WPL-MIGST-500 415 Volt

500AMP 415 VOLT INVERTER WELDER

Specification

Power Output 500Amp

Duty Cycle 60%


Height 1610mm

Width 700mm

Length 1030mm

Weight 48kg



Full function digital control

panel 230 Volt 200Amp pulse

DC TIG package include torch,

earth, regulator, gas hose and

torch consumable kit.

• 3 year warranty

• Dual LED display

Code Description

WPR-TIG200 230 Vo lt

DIGITAL 200AMP DC TIG WELDER

Specification

Power Output 200Amp

Duty Cycle 35%


Height 320mm

Width 200mm

Length 430mm

Weight 10.5kg

Bestselling 415 Volt TIG

widely used for industrial site

fabrications for process and

pipework fabrications

• 2 year warranty

• Powerful and reliable

Code Description

WPLV270-TP 415 Vo lt

270AMP INVERTER TIG WELDER

Specification

Power Output 270Amp

Duty Cycle 35%


Height 385mm

Width 215mm

Length 480mm

Weight 13.5kg

This popular TIG unit offers a

max power of 160Amp on 230

Volt and 105amps on 110 Volt.

• 2 year warranty

• Full TIG pulsing

Code Description

WPLV160-TP-2V 110/230 Volt

160AMP DUAL VOLTAGE TIG WELDER

Specification

Power Output 160Amp

Duty Cycle 35%

Input voltage 110/230 Volt

Height 400mm

Width 170mm

Length 325mm

Weight 10kg

200amp 110-230 Volt Dual

voltage DC TIG Welder with

full featured pulse, supplied

with Torch, earth lead, gas

hose, regulator and torch

consumables kit

• 2 year warranty

• Full featured pulse settings

Code Description

WPR-TIG200DV 230 Volt

200AMP 110-230 VOLT DC TIG/STICK WELDER

Specification

Power Output 200Amp

Duty Cycle 35%


Height 425mm

Width 195mm

Length 310mm

Weight 18.0kg

230 Volt 7 litre tank water

cooler 8.5 L/min flow rate,

cools up to 600 amps.

• 2 year warranty

• Retrots to any TIG welder

Code Description

WPR- WC230D 230 Volt

230 VOLT WATER COOLER

Specification

Power Output N/A

Duty Cycle N/A

Input voltage N/A

Height 480mm

Width 251mm

Length 346mm

Weight 16kg

Popular user-friendly and

lightweight Lincoln machine,

Pulse TIG options, HF TIG

and Stick MMA welding.

Autoswitch dual voltage, just

change the plug.

• 2 year warranty

Code Description

WPLV205-T-MV 230 / 415 Volt

INVERTEC DC TIG WELDER

Specification

Power Output 200Amp

Duty Cycle 35%


Height 385mm

Width 215mm

Length 480mm

Weight 16.8kg



WE L DI N G


panel Pulse 230 Volt 210Amp

AC / DC TIG package include

torch, earth, regulator, gas hose

and torch consumable kit.

• 3 year warranty

• Digital control panel

Code Description


DIGITAL 210AMP AC / DC TIG WELDER

Specification

Power Output 210Amp

Duty Cycle 35%


Height 420mm

Width 210mm

Length 445mm

Weight 17kg

This powerful inverter boasts

perfect performance with

its unique LCD interface

display, offering all unrivaled

adjustability on welding and

arc parameters.

• 2 year warranty

• Powerful and reliable

Code Description

WPL-V320-AC 415 Volt

INVERTEC V320 AC DC WELDER

Specification

Power Output 320Amp

Duty Cycle 35%


Height 432mm

Width 280mm

Length 622mm

Weight 33kg


panel pulse 415v 500Amp

AC/DC TIG package includes

torch, earth, gas hose and

torch consumable kit.

• 3 year warranty

• Dual LED displays

Code Description



Specification

Power Output 500Amp

Duty Cycle 35%


Height 490mm

Width 225mm

Length 480mm

Weight 33kg


panel Pulse 415 Volt 320Amp

AC/DC TIG package include

torch, earth, regulator, gas

hose and torch consumable kit.

• 3 year warranty

• 10 job stores

Code Description



Specification

Power Output 315Amp

Duty Cycle 35%


Height 490mm

Width 225mm

Length 480mm

Weight 27kg

Unique Multivolt 110/230 AC /

DC inverter for site welding. Full

range of programmes and fully

adjustable waveform control.

• 2 year warranty

• Foot pedal available

Code Description

WPLV205-TP-MV 110 / 230 Volt

INVERTEC AC / DC TIG WELDER

Specification

Power Output 200Amp

Duty Cycle 40%


Height 380mm

Width 210mm

Length 480mm

Weight 18kg

LINKED PRODUCTS

Fire protection equipment,

see pages 217-219



Auto adaptive arc force give the

smoothest weld performance.

Crips and Soft arc settings.

• 2 year warranty

• Hot start feature

Code Description

WPLV145-52V 110/230 Volt

DUAL VOLTAGE STICK INVERTER WELDER

Specification

Power Output 145Amp

Duty Cycle 35%


Height 288mm

Width 158mm

Length 392mm

Weight 6.0kg

The Invertec 270SX is a latest

generation welding plant

built for heavy duty site or

workshop applications

• Professional inverter stickwelder

• Powerful and compact

Code Description

WPL-V270-SX 415 Volt

INVERTER 270SX STICK INVERTER WELDER

Specification

Power Output 270Amp

Duty Cycle 35%


Height 389mm

Width 247mm

Length 480mm

Weight 22kg

Chopper inverter technology

for superb smooth welding

performance. Auxilliary output

for fixed speed power tools.

• 1 year warranty

• Ideal for genie lift orupstairs work

Code Description

WPGWM-150 Petrol Weldergen

PETROL WELDER GENERATOR 150

160Amp 110-230 Volt Dual

voltage MMA welding package

supplied with MMA lead set

and carry case.

• 2 year warranty

• Ready to weld incarry case

Code Description

WPR-M160DV 110/230 Volt

160AMP 110-230 VOLT STICK INVERTER WELDER

Specification

Power Output 160Amp

Duty Cycle 35%


Height 290mm

Width 130mm

Length 210mm

Weight 6.0kg

The Invertec 400SX is a latest

generation welding plant with

capacity for up to 6.3mm

welding electrodes.

• Professional inverter stickwelder

• Powerful and compact

Code Description

WPL-V400-SX 415 Volt

INVERTER 400SX STICK INVERTER WELDER

Specification

Power Output 400Amp

Duty Cycle 35%


Height 455mm

Width 301mm

Length 618mm

Weight 36kg

Network Rail approved

Weldmaker 165SP2.

• Welding up to4.00mm electrodes

• Welding and auxiliaryoutputs can be used

Code Description

WDG-AG-165 Petrol Weldergen


Specification

Power Output 160Amp

Duty Cycle 60%

Output 110 Volt

Height 480mm

Width 360mm

Length 240mm

Weight 34kg

Specification

Power Output 165Amp

Duty Cycle 60%

Output 110 Volt

Height 630mm

Width 494mm

Length 687mm

Weight 60kg



WE L DI N G

Best selling 200Amp mobile

plant with the benchmark

HONDA GX390 engine.

Easy start unit with Sincro

welding unit.

• 1 year warranty

• Available frame mount ortrolley mount

Code Description

WPGW200-AC Petrol Weldergen

PETROL WELDER GENERATOR 200AC

DC welder generator plants

give the best welding

performance, with smooth arc

characteristics on most kinds

of rods, even low hydrogen.

• 1 year warranty

• Welds up to 4.0mmelectrodes

Code Description

WPGW200-AC Petrol Weldergen

PETROL WELDER GENERATOR 200DC

Kubota engine heavy

duty ArcGen machine,

widely used in marine,process and engineering.

Continuous welding with

4.0mm electrodes.

• 1 year warranty

Code Description

WDG-AG-200 Diesel Weldergen

DIESEL WELDER GENERATOR 200

Robust and reliable diesel

welder generator with great

power to weight ratio – ideal

for van mounts or road tow.

• Welding up to 6mmelectrodes

• 60dB(A) @ 7metres

Code Description

WDG-AG-300 Diesel Weldergen

DIESEL WELDER GENERATOR 300

This inverter based welder

generator is a more powerful

version of the 150, giving high

power for low weight.

• 2.0KW 110v output

• Honda engine

Code Description

WPGWM-211 Petrol Weldergen


Powerful versatile heavy duty

welder generator with rugged

Perkins engine. MMA stick,

Cellulosic, DC tig, arc gouging

to 10mm. Ideal for intensive

welding and site use.

• 3 year warranty

Code Description

WPL-V500 Diesel Weldergen

LINCOLN VANTAGE WELDER GENERATOR

Specification

Power Output 200Amp

Duty Cycle 35%

Output 110/230 Volt

Height 710mm

Width 640mm

Length 1050mm

Weight 95kg

Specification

Power Output 200Amp

Duty Cycle 35%

Output 110/230 Volt

Height 710mm

Width 640mm

Length 1050mm

Weight 105kg

Specification

Power Output 300Amp

Duty Cycle 60%

Output 110 Volt

Height 740mm

Width 680mm

Length 1270mm

Weight 300kg

Specification

Power Output 200Amp

Duty Cycle 60%

Output 110 Volt

Height 880mm

Width 770mm

Length 1030mm

Weight 210kg

Specification

Power Output 500Amp

Duty Cycle 60%

Output 110/230/415Volt

Height 915mm

Width 642mm

Length 1524mm

Weight 559kg

Specification

Power Output 200Amp

Duty Cycle 60%

Output 110 Volt

Height 520mm

Width 490mm

Length 610mm

Weight 57kg



30Amp 110-230 Volt dual

voltage plasma cutter, 8mm

230 Volt genuine clean cut,

supplied with 4.5m torch

ready to cut package.

• 2 year warranty

• 8mm clean cut in steel

Code Description

WPR- P30Dv 415v

30AMP 110-230 VOLT PLASMA CUTTER

Specification

Power Output 30Amp

Duty Cycle 35%


Height 390mm

Width 190mm

Length 290mm

Weight 14kg

100Amp 415 volt plasma

cutter, 31mm genuine clean

cut. 40mm severance cut.

Package includes torch, earth

and regulator.

• 3 years warranty

• 31mm genuine clean cuton steel

Code Description

WPR-P100 415v

100AMP PLASMA CUTTER

Specification

Power Output 100Amp

Duty Cycle 35%


Height 570mm

Width 330mm

Length 600mm

Weight 22kg

This unique machine can

work with external compressed

air supply to cut up to 10mm, or

use its own internal compressor

for ultimate portability.

• 2 year warranty

• No external airsupply needed

Code Description

WPLPC210 230v

25AMP PLASMA CUTTER WITH COMPRESSOR

Specification

Power Output 25Amp

Duty Cycle 20A @ 60%


Height 385mm

Width 215mm

Length 480mm

Weight 18.5kg

60Amp 415 Volt plasma

cutter 21mm genuine clean

cut, 30mm severance cut.

Package includes torch, earth

and regulator.

• 3 years warranty

• 21mm clean cut

Code Description

WPR-P60 415v

60AMP PLASMA CUTTER

Specification

Power Output 60Amp

Duty Cycle 35%


Height 570mm

Width 330mm

Length 600mm

Weight 18kg



WE L DI N G

Portable fume extraction

and filtration unit, with twin

2 speed motors. Automatic

start/stop with the welding arc.

• 1 year warranty

• Range of extraction nozzleswith magnetic foot

Code Description

WPLMFX-110 110 Volt

WPLMFX-230 230 Volt

MINIFLEX

Specification

Motor voltage 110 or 230 Volt

Airflow 230m3 /hr

Height 254mm

Width 145mm

Length 350mm

Weight 15kg

Powerful 6 blade 310mm

diameter fan moves large

volumes of air to cool, ventilate

and extract fumes and dirty air.

• 1 year warranty

Code Description

WPBRF-110 110 Volt

WPBRF-230 230 Volt

AIR DUCT SITE EXTRACT

Specification

Motor Voltage 110 or 230 Volt

Output 3250m3 /hr

Height 500mm

Width 410mm

Length 740mm

Weight Varies with hose

Bestselling mobile fume

extractor and filtration unit

with large capacity main filter.

Arc sensitive start/stop switch.

Suitable for heavy fumes.

• 1 year warranty

• Unit and arm sold asseperate parts

Code Description

WPLM200M-110 110v Unit

WPLM200M-230 230v Unit

WPLM200M-ARM 3M Arm

MOBIFLEX

Specification

Motor voltage 110 or 230 Volt

Airflow 735 cfm

Height (plus arm) 900mm

Width 810mm

Length 1210mm

Weight 111kg

Honda engines for reliability

and good starting. Low oil cut

out safety feature. Brushless

maintenance free alternator.

Frame mount for security,

wheels and handle kits available.

• 1 year warranty

• Electric start, trolleymount, 110 Volt onlyoptions available

Code Description

PGSHM-27K 2.7 KVA

PETROL GENERATOR – 2.7KVA

Specification

Power Output (Amps) 2.7 KVA

230V Sockets Options


Height 410mm

Width 420mm

Length 610mm

Weight 36kg







• 1 year warranty


Code Description

PGSHM-50K 5.0 KVA


Specification




Height 540mm

Width 480mm

Length 690mm

Weight 59kg







• 1 year warranty


Code Description

PGSHM-60K 6.5 KVA


Specification




Height 540mm

Width 480mm

Length 690mm

Weight 71kg


http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 22/22

G

SPECIALIST HIRE

Contractors come to us for the type of innovative

products that cannot be found through a regularplant hire company.

When it comes to plant hire, OnSite Support

works only at the specialist end of the market,

with a strong emphasis on metalworking

equipment. Many of our customers rely on us

to keep them up-to-date on newly launched

equipment designed to fulfil very specialist roles.

Work with us and discover how we can help you

make significant savings on plant procurement.

SPECIALIST HIRE

Documents

Welding OnSite Support Catalogue 2012v1