8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 1/22
ONSITE SUPPORT
WELDING
OnSite Support make available all the products and machinery your
operatives require to fabricate metal, including the control gear for oxy-fuel
welding and cutting. No site, after all, excludes the necessity for welding,
where even a concrete frame will require the skills of a welder to reinforce it.What sets us apart is the quality of our technical support. Our in-house team
of experienced engineers will offer guidance and make on-site visits if required
to ensure that a job is conducted effectively and without undue hazard.
WE L DI N G
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 2/22e [email protected] t 0800 781 9765 f 0845 330 1373286 W E L D I N G
Precision layer wound MIG welding
wire, manufactured to BS2901 - A18
spec, on plastic reels. Moisture Sealed.
• Quality checked and moistureprotective packaging
Code Description
WMM08 0.8mm, 15kg Reel
WMM10 1.0mm, 15kg Reel
WMM12 1.2mm, 15kg Reel
XTL WELD MIG WIRE A18
Steel wound liners for steel MIG wires,
to carry the wire through the torch cable.
• 0.6-0.8mm blue, 1.0-1.2mm red
Code Description
WMTLSB 0.6 - 0 .8mm, 3m
WMTLSB 0.6 - 0 .8mm, 4m
WMTLSB 0.6 - 0 .8mm, 5m
WMTLSR 1.0 - 1 .2mm, 3m
WMTLSR 1.0 - 1 .2mm, 4m
WMTLSR 1.0 - 1 .2mm, 5m
316 stainless wire, precision wound
on basket reels. The common
stainless grade, with good corrosionand pitting resistance.
• All other stainless grades available
Code Description
WMS316 0.8mm, 15kg Reel
WMS316 1.0mm, 15kg Reel
316 MIG WIRE
MB50 500AMP MIG TORCH
Code Description
WMT3603 360Amp 3m Complete
WMT3604 360Amp 4m Complete
WMT3605 360Amp 5m Complete
WMT23 M6 Tip 0.8, 1.0, 1.2, 1.6mm
WMT34 M8 Tip 0.8, 1.0, 1.2, 1.6mm
Code Description
WMT36TA-S M6 Tip Adaptor
WMT36TA-S M8 Tip Adaptor
WMT36GD-1 Gas Distributor
WMT36SShrouds, Conical,Taper or Straight
MB36 360AMP MIG TORCH
MB25 250AMP MIG TORCH
MIG TORCH LINER STEEL
Bestselling 250Amp MIG torch and consumable parts, lightweight and flexible.
Industry standard euro connection and flexible cable.
• Fits MB 25 250A lightweight MIG torch
BEST
SELLER
Code Description
WMT2503 250Amp 3m Complete
WMT2504 250Amp 4m Complete
WMT2505 250Amp 5m Complete
WMT23 M6 Tip 0.8 , 1 .0 , 1.2 , 1.6mm
WMT34 M8 Tip 0.8 , 1 .0 , 1.2 , 1.6mm
Code Description
WMT25TA-S M6 Tip Adaptor
WMT25TA-M8 M8 Tip Adaptor
WMT25SS Shroud Spring
WMT25SShrouds, Conical,Taper or Straight
Industry standard MIG torch and consumable parts,
300Amp @ 60%, widely used for general structural
work and medium fabrication.
• Medium duty aircooled torch
Powerful watercooled MIG torch, 430Amp @
100%, ideal for heavy fabrications, beamwork,
flanges etc. Ergonomic handle design.
• Heavy duty watercooled torch
Code Description
WMT5W03 500Amp 3m Complete
WMT5W04 500Amp 4m Complete
WMT34 M8 Tips 0.8, 1 .0 , 1 .2 , 1.6mm
WMT5TWA 501 Tip Adaptor
WMT5W-GD 501 Gas Distributor
WMT5WS 501 Shroud Conical, Taper or Straight
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 3/22Visit our website on www.onsite-support.co ONSITE SUPPORT 287
WE L DI N G
Protect and enhance torch tip and
shroud life with this anti-spatter paste.
Non-toxic and safe, it allows better
welding by keeping the torch cleaner.
• 450g tin of tip dip paste
Code Description
WSRTD45 450g Tin
TIP DIP PASTE
Widely used, waterbased anti-spatter
spray in 450ml aerosol form. Spray onto
workpiece to stop spatter sticking during
MIG welding.
• Oil and silicone free
Code Description
WSRSA 450ml
SPATTER RELEASE AEROSOL
Effective and economical, refillable
antispatter. Trigger spray is refilled from
larger sizes. Oil and silicon free.
• Reduce paint & galvanising problems
Code Description
WSRB25 25ltr
WSRB5 5ltr
WSRTS 500ml
SPATTER RELEASE BULK
Hardfacing MIG wire for high impact/
abrasion applications eg. Plant hire,
piling, bucket repair, etc.
• 1.2mm 15kg
Code Description
WMF60 1.0mm, 15kg Reel
WMF60 1.2mm, 15kg Reel
HARD FACING MIG WIRE
Lincoln Innershield flux cored wire
designed for site welding from
wirefeeder/generator set ups.
• NR232 for multiple passheavy welding
Code Description
WMM232 1.7mm, 11.35kg Reel
WMM232 1.7mm, 6.13kg Reel
WMM232 1.8mm, 11.35kg Reel
WMM232 1.8mm, 6.13kg Reel
INNERSHIELD WIRE NR232
Specially developed welders pliers
featuring sidecutters for wire, special
slots for hot tip and shroud removal and
cleaning splines for removing spatter
from inside shrouds.
• Essential tool for MIG welders
Code Description
WMP25 250Amp
WMP36 360Amp
MIG PLIERS
LINKED PRODUCTS
Pro Welding Gauntlets
with carpel wrist support,
see page 173
LINKED PRODUCTS
Fristads Flame Retardant
Kneepad Trousers,
see page 45
LINKED PRODUCTS
Industrial Angle Grinders,
see page 120
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 4/22e [email protected] t 0800 781 9765 f 0845 330 1373288 W E L D I N G
600HB Hardfacing rod for wear resistant
surfacing of steels that are subjected to
abrasion and metal-to-metal wear.
• High strength
Code Description
WEHF425 2.5mm, 5kg Packet
WEHF425 3.2mm, 5kg Packet
WEHF425 4.0mm, 5kg Packet
WEHF425 5.0mm, 5kg Packet
HARD FACING ELECTRODES
High strength rod with good crack
resistance. Hugely versatile for joining
different or unknown materials.
• 29/9 Spec, 312 Stainless
Code Description
WEDS65 2.0mm, 4.0kg Packet
WEDS65 2.5mm, 4.0kg Packet
WEDS65 3.2mm, 5.0kg Packet
WEDS65 4.0mm, 5.0kg Packet
DISSIMILAR RODS
Mild steel general use 6013 rod for a
wide range of mild steel fabrication
applications. Excellent for overhead work.
• Fincord M is still a welders favorite
Code Description
WEMSFM 2.5 x 350mm, 12.3kg Carton
WEMSFM 3.2 x 350mm, 12.9kg Carton
WEMSFM 4.0 x 450mm, 15.9kg Carton
WEMSFM 5.0 x 450mm, 15.3kg Carton
FINCORD M
Rutile covered high performance
electrode with 180% weld metal
recovery and high deposition rate.
• E7024 Iron powder
Code Description
WEI-M180 3.2 x 450mm, 21.6kg Carton
WEI-M180 4.0 x 450mm, 23.2kg Carton
WEI-M180 5.0 x 450mm, 20.0kg Carton
MULTIFER 180 RODS
Very popular top quality rods with
widely used weld procedures.
Ideal for structural welding.
• E7018-4-H4R Sahara ready pack
Code Description
WELHC49 2.5 x 350mm, 16kg Carton
WELHC49 3.2 x 450mm, 20kg Carton
WELHC49 4.0 x 450mm, 16kg Carton
WELHC49 5.0 x 450mm, 20.8kg Carton
CONARC 49C SRP RODS
A quality range of different sized
electrode ovens are available, small,
medium and large. Dual voltage.
• Adjustable thermostat
Code Description
WAEDO Dual Voltage, 14kg
WAEDO Dual Vo ltage, 136kg
ELECTRODE DRYING OVEN
150w heated electrode dispenser
for keeping rods at a steady 80-100°C
prior to welding.
• 5kg capacity
• Dual voltage 110/230 Volt
Code Description
WAEQH Dual Voltage
ELECTRODE QUIVER
6103 electrode with exceptional
weldability in all positions except vertical
down. Soft arc and minimal spatter.
• Bestseller for general mild steel
Code Description
WEM-SUM 2.5 x 350mm, 20.4kg Carton
WEM-SUM 3.2 x 350mm, 20.8kg Carton
WEM-SUM 4.0 x 350mm, 20.4kg Carton
WEM-SUM 5.0 x 450mm, 26.0kg Carton
6013 SUM ELECTRODESLINKED PRODUCTS
For angle grinders,
see page 120
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 5/22Visit our website on www.onsite-support.co ONSITE SUPPORT 289
WE L DI N G
Cellulosic electrode for pipe welding in
the vertical down position, particularly
recommended for welding root passes.
• Supplied in metal tin
Code Description
WEMSN5 2.5mm - 20kg Tin
WEMSN5 3.2mm - 20kg Tin
WEMSN5 4.0mm - 20kg Tin
6010 ELECTRODE
Mild steel electrode with great usability
in all positions, ideal for gap bridging and
striking in rusty or rough areas.
• E6013 Rutile rod – mild steel
Code Description
WEM-BL 3.2 x 350mm, 20.0kg Carton
WEM-BL 4.0 x 350mm, 18.8kg Carton
WEM-BL 5.0 x 450mm, 26.0kg Carton
PHOENIX BLAU 30
Double coated easy restrike 7018
electrode for high strength welding
applications. Standard pack.
• E7018-1H4R spec, low hydrogen
Code Description
WELH-EV50 2.5 x 350mm, 16.8kg Carton
WELH-EV50 3.2 x 450mm, 21.6kg Carton
WELH-EV50 4.0 x 450mm, 23.2kg Carton
WELH-EV50 5.0 x 450mm, 22.4kg Carton
BOHLER FOX EV50
Double coated easy restrike 7018
electrode for high strength welding
applications. Aluminium vacuum pack.
• E7018-1H4R spec, low hydrogen
Code Description
WELH-EV50 2.5 x 350mm, 14.4kg Carton
WELH-EV50 3.2 x 450mm, 19.84kg Carton
WELH-EV50 4.0 x 450mm, 18.64kg Carton
WELH-EV50 5.0 x 450mm, 17.04kg Carton
BOHLER FOX EV50 VAC PAC
A well priced 316L rod for
pharmaceutical, food and hygiene
applications. All sizes available.
• Bestselling 316 stainless rod
Code Description
WESS63 2.0mm, 4.0kg Packet
WESS63 2.5mm, 4.0kg Packet
WESS63 3.2mm, 5.0kg Packet
WESS63 4.0mm, 5.0kg Packet
316 STAINLESS STEEL
Quality Ni-Fe rod for high strength cast
joining or surfacing. Often used to join
cast iron to mild steel.
• Moisture resistant packaging
Code Description
WECAST70 2.5mm, 1kg Packet
WECAST70 2.5mm, 5kg Packet
WECAST70 3.2mm, 1kg Packet
WECAST70 3.2mm, 5kg Packet
CAST ELECTRODES NiFe
For use on all types of cast iron, giving
a good, fully machinable weld deposit.
Moisture resistant packaging.
• Handy 1kg site packs
• 20kg cartons available
Code Description
WECAST80 2.5mm, 1kg Packet
WECAST80 3.2mm, 1kg Packet
WECAST80 2.5mm, 5kg Packet
WECAST80 3.2mm, 5kg Packet
CAST ELECTRODES – PURE NICKEL
This low hydrogen rod is very
popular where top quality welds
are required and welding arc
characteristics are vital.
• Very popular top quality 7016
Code Description
WELH 3.2 x 350mm, 16.4kg Carton
WELH 3.2 x 450mm, 20.8kg Carton
WELH 4.0 x 450mm, 20.4kg Carton
COMET J50N
Different types of quality welders
chipping hammer for slag removal after
MMA and flux cored welding.
• Hardened head with dual point
Code Description
WACH01 Metal Tube Handle
WACH02 Spring Handle
WACH03 Wooden Handle
WELD CHIPPING HAMMER
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 6/22e [email protected] t 0800 781 9765 f 0845 330 1373290 W E L D I N G
Heavy duty welding spec copper cable,
securely fitted to industrial crocodile
earth lead and cable plugs.
• Robust well made weldingearth leads
Code Description
WCEL5M 25mm, 200Amp, 5m
WCEL5M 35mm, 300Amp, 5m
WCEL5M 50mm, 400Amp, 5m
WCEL5M 70mm, 600Amp, 5m
WELDING EARTH LEAD
Heavy duty twist type electrode
holders for quick rod changes and
secure grip.
• Supplied with hex keyand tting kit
Code Description
WAEHT40 400Amp
WAEHT60 600Amp
TWIST TYPE ELECTRODE HOLDER
Heavy duty weld leads with PVC rubber
sheathing over copper cable, fitted with
plug and electrode holder.
• All other lengths made to order
Code Description
WCWL5M 25mm, 200Amp, 5m
WCWL5M 35mm, 300Amp, 5m
WCWL5M 50mm, 400Amp, 5m
WCWL5M 70mm, 600Amp, 5m
WELDING LEAD
Dinz type cable female sockets for
machine connection welding, earth
and extension leads.
• Easy to t and replace
• Other sizes available
Code Description
WCAS09 16 - 25mm Sq, 150-200Amp
WCAS13 35 - 50mm Sq, 200-400Amp
WCAS15 50 - 70mm Sq, 400-600Amp
WCAS19 70 - 95mm Sq, 600Amp+
WELDING CABLE SOCKET
Dinz type cable male plugs for
machine connection welding, earth
and extension leads.
• Easy to t and replace
Code Description
WCAP09 16 - 25mm Sq, 150-200Amp
WCAP13 35 - 50mm Sq, 200-400Amp
WCAP15 50 - 70mm Sq, 400-600Amp
WCAP19 70 - 95mm Sq, 600Amp+
WELDING CABLE PLUG
Heavy duty welding spec copper cable,
sold on the reel in 50 or 100m coils.
• Cut to length service on request
Code Description
WCPC25 25mm Sq, 200Amp
WCPC35 35mm Sq, 300Amp
WCPC50 50mm Sq, 400Amp
WCPC70 70mm Sq, 600Amp
WCPC95 95mm Sq, 700Amp
WELDING CABLE
Standard replacement earth clamps to fit
onto all weld earth leads. Powerful jaw
grip for superior earth.
• Stong grip and replaceable ttings
Code Description
WAEC400 400Amp
EARTH CLAMP – CROC
Standard replacement earth clamp, with
a powerful jaw grip for superior earth.
• Long life
• Powerful grip
Code Description
WAES600 600Amp
SCREW TYPE EARTH CLAMP
Weld extension leads, fitted with dinz
type cable plug and socket, with welding
spec copper cable.
• All other lengths made to order
Code Description
WCEX 25mm, 200Amp, 15m Cable
WCEX 35mm, 300Amp, 15m Cable
WCEX 50mm, 400Amp, 15m Cable
WCEX 70mm, 600Amp, 15m Cable
WELD EXTENSION LEADS
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 7/22Visit our website on www.onsite-support.co ONSITE SUPPORT 291
WE L DI N G
These small collets fit the WP9 and
WP20 Torch and fit inside the collet
body to clamp onto the tungsten.
• 25mm long
Code Description
WTT13N21 1.0mm
WTT13N22 1.6mm
WTT13N23 2.4mm
WTT13N24 3.2mm
The small collet body fits the WP9 and
WP20 series torches, and holds external
threads for the ceramic and the back cap.
• 21mm long
Code Description
WTT13N26 1.0mm
WTT13N27 1.6mm
WTT13N28 2.4mm
WTT13N29 3.2mm
The small ceramic fits the WP9 and
WP20 series TIG Torches and controls
the shielding gas to the weld pool.
• 30mm long
Code Description
WTT13N08 6.0mm Bore
WTT13N09 8.0mm Bore
WTT13N10 10mm Bore
WTT13N12 12mm Bore
WTT13N13 16mm Bore
Small aircooled TIG torch – 125Amp.
• Flexneck torches and torchbodies available
Code Description
WTTWP9-12SSWP9 Package12ft switched and sheathed
WTTWP9-25SSWP9 Package25ft switched and sheathed
WTTWP9 WP9 Torch Body
WP9 TIG TORCH
SMALL COLLETS
The long ceramic is ideal for tight access
applications where good shielding gas
control is essential.
• 48mm long
Code Description
WTT796F70 5.0mm Bore
WTT796F71 6.0mm Bore
WTT796F72 8.0mm Bore
WTT796F73 10mm Bore
SMALL LONG CERAMICS
Small watercooled TIG torch – 250Amp.
• Flexneck torches and torchbodies available
Code Description
WTTWP20-12SSWP20 12ft Packageswitched and sheathed
WTTWP20-25SSWP20 25ft Packageswitched and sheathed
WTTWP20 WP20 Torch Body
WP20 TIG TORCH
SMALL COLLET BODIES
These back caps fit the WP9 and 20
series TIG torches and control the length
of tungsten welding electrode.
• Thread diameter 7.8mm
Code Description
WTT41V33 Short Back Cap
WTT41V35 Medium Back Cap
WTT41V24 Long Back Cap
SMALL BACK CAPS
SMALL CERAMICS
High performance regulator for argon,
argon-mix, and similar inert shielding
gases for welding. Gauges show bottle
contents and flow rate.
• Fits all standard cylinders
Code Description
WGRSG-2 Single Stage 2 Gauge
ARGON REGULATOR
Fit to argon regulators to provide greater
control of shielding.
• Ideal for MIG and TIG use
Code Description
WGRFM Argon Flowmeter
ARGON FLOWMETER
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 8/22e [email protected] t 0800 781 9765 f 0845 330 1373292 W E L D I N G
Suitable for joining 18/8 (304) austenitic
stainless steels providing good corrosion
and wear resistance.
• All diameters available to order
Code DescriptionWTS308-16 1.6mm, 5kg Pack
WTS308-24 2.4mm, 5kg Pack
STAINLESS TIG RODS 308L
Large aircooled TIG torch – 150Amp.
• Flexneck torches and torchbodies available
Code Description
WTTWP17-12SSWP17 Torch Package12ft switched and sheathed
WTTWP17-25SSWP17 Torch Package25ft switched and sheathed
WTTWP17 WP17 Torch Body
WP17 TIG TORCH
Large watercooled TIG torch – 350Amp.
• Flexneck torches and torchbodies available
Code Description
WTTWP18-12SSWP18 Torch Package12ft switched and sheathed
WTTWP18-25SSWP18 Torch Package25ft switched and sheathed
WTTWP18 WP18 Torch Body
WP18 TIG TORCH
Large aircooled TIG torch – 200Amp.
• Flexneck torches and torchbodies available
Code Description
WTTWP26-12SSWP26 12ft PackageSwitched and sheathed
WTTWP26-25SSWP26 25ft PackageSwitched and sheathed
WTTWP26 WP26 Torch Body
WP26 TIG TORCH
These large collets fit the WP17, WP18,
and WP26 torch and fit inside the collet
body to clamp onto the tungsten.
• 50mm long
Code Description
WTT10N22 1.0mm
WTT10N23 1.6mm
WTT10N24 2.4mm
WTT10N25 3.2mm
WTT54N20 4.0mm
The large collet body fits the WP17,
WP18 and WP26 series torches, and
holds external threads for the ceramic
and the back cap.
• 47mm long
Code Description
WTT10N30 1.0mm
WTT10N31 1.6mm
WTT10N32 2.4mm
WTT10N28 3.2mm
WTT406488 4.0mm
LARGE COLLETS LARGE COLLET BODIES LARGE CERAMICS
The long ceramic is ideal for tight access
applications where good shielding gas
control is essential – fits the larger torches.
• Ideal for tight access corners
Code Description
WTT10N47L 5.0mm Bore
WTT10N48L 6.0mm Bore
WTT10N49L 8.0mm Bore
LARGE LONG CERAMICS – 76MM
These back caps fit the WP17, WP18,
WP26 series TIG torches and control the
length of tungsten welding electrode.
• Thread diameter 9.3mm
Code Description
WTT57Y02 Long Back Cap
WTT57Y04 Short Back Cap
LARGE BACK CAPS
The large ceramic fits the WP17, WP18,
and WP26 series TIG torches and
controls the shielding gas to the weld
pool.
• 47mm long
Code Description
WTT10N50 6.0mm Bore
WTT10N49 8.0mm Bore
WTT10N47 11mm Bore
WTT10N46 13mm Bore
WTT10N45 16mm Bore
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 9/22Visit our website on www.onsite-support.co ONSITE SUPPORT 293
WE L DI N G
Good for hard to weld materials, and
dissimilar materials.
• 29/9 grade
• All diameters available to order
Code Description
WTS312-10 1.0mm, 5kg Pack
WTS312-12 1.2mm, 5kg Pack
WTS312-16 1.6mm, 5kg Pack
WTS312-24 2.4mm, 5kg Pack
WTS312-32 3.2mm, 5kg Pack
STAINLESS TIG RODS 312L
Quality 316L welding wire – standard for
many critical food, pharmaceutical and
hygiene applications.
• Certicates of conformity available
Code Description
WTS316-10 1.0mm, 5kg Pack
WTS316-12 1.2mm, 5kg Pack
WTS316-16 1.6mm, 5kg Pack
WTS316-24 2.4mm, 5kg Pack
WTS316-32 3.2mm, 5kg Pack
STAINLESS TIG RODS 316L
2% Thoriated (red tip) tungstens for
stainless and mild steel.
• Handy dispenser – Pk10
Code Description
WTUT16 1.6 x 150mm
WTUT24 2.4 x 150mm
WTUT32 3.2 x 150mm
WTUT40 4.0 x 150mm
TUNGSTENS 2% THORIATED
Zirconiated (white tip) tungstens
for aluminium welding. Positive arc
striking characteristics.
• Handy dispenser – Pk10
Code Description
WTUZ16 1.6 x 150mm
WTUZ24 2.4 x 150mm
WTUZ32 3.2 x 150mm
WTUZ40 4.0 x 150mm
WTUZ48 4.8 x 150mm
TUNGSTENS ZIRCONIATED
Ceriated (grey tip) tungstens for TIG
welding all common metals including
mild and stainless steel and aluminium.
• Handy dispenser – Pk10
Code Description
WTUC16 1.6 x 150mm
WTUC24 2.4 x 150mm
WTUC32 3.2 x 150mm
WTUC40 4.0 x 150mm
TUNGSTENS CERIATED
4043 spec TIG wire with 5% silicon -
ideal for general ali welding.
• Packed in 2.5kg plastic tubes
Code Description
WTA4043-16 1.6mm, 2.5kg
WTA4043-24 2.4mm, 2.5kg
WTA4043-32 3.2mm, 2.5kg
ALUMINIUM TIG RODS 4043A
5356 spec TIG wire with 5% magnesium.
• Packed in 2.5kg plastic tubes
Code Description
WTA5356-16 1.6mm, 2.5kg
WTA5356-24 2.4mm, 2.5kg
WTA5356-32 3.2mm, 2.5kg
ALUMINIUM TIG RODS 5356
Niobium stabilised stainless steel rod
prevents weld decay and offers excellent
corrosion resistance.
• 19.9NB
• All diameters available to order
Code Description
WTS347-10 1.0mm, 5kg Pack
WTS347-12 1.2mm, 5kg Pack
WTS347-16 1.6mm, 5kg Pack
WTS347-24 2.4mm, 5kg Pack
WTS347-32 3.2mm, 5kg Pack
STAINLESS TIG RODS 347L
A15 triple-deoxidised copper coated TIG
wire for precision welding of all mild steel.
• Handy 5kg plastic tube packs
Code Description
WTMA15-10 1.0mm, 5kg Pack
WTMA15-12 1.2mm, 5kg Pack
WTMA15-16 1.6mm, 5kg Pack
WTMA15-24 2.4mm, 5kg Pack
WTMA15-32 3.2mm, 5kg Pack
MILD STEEL TIG RODS A15
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 10/22e [email protected] t 0800 781 9765 f 0845 330 1373294 W E L D I N G
Cadmium free silver solder, 55% silver.
Free from highly toxic cadmium to
conform with COSSH requirements.
• Low temperature melting range(630-660oC)
Code Description
WSBAG14 1.5 x 500mm, 1kg Pack
WSBAG14-10 1.5 x 500mm, 10 Rod Pack
SILVER SOLDER
Famous Johnston Matthey silver
brazing flux powder. Generally soluble
in hot water.
• 500G tub
Code Description
WSF500 500g
SILVER SOLDER FLUX
Complete gas kit with plugged (no gauge)
regulators, hoses, flashback arrestors, 18”
cutting torch, nozzles, lighter, and spanner.
• 10mm diameter industrial hoses
Code Description
WGCK10A-PLG 10m Oxy/Acetylene
WGCK20A-PLG 20m Oxy/Acetylene
WGCK10P-PLG 10m Oxy/Propane
WGCK20P-PLG 20m Oxy/Propane
PLUGGED GAS CUTTING KITS
Complete Oxy/Acetylene kit with 2 gauge
regulators, hoses, flashback arrestors, 18”
cutting torch, nozzles, lighter, and spanner.
• 10mm diameter industrial Hoses
Code Description
WGCK10A-2G 10m Hoses
WGCK20A-2G 20m Hoses
Contains shank, cutting attachment, mixer,
size 1-13 nozzles, nozzle cleaners, 2 cuttingnozzles, regulators, flashback arrestors,
and spark lighter.
• Oxy/Acetylene kit supplied in kitcase
Code Description
WGCKA-2G-T4 4m Hoses
Contains shank, cutting attachment,
mixer, size 1-13 nozzles, nozzle
cleaners, 2 cutting nozzles, regulators,
flashback arrestors, and spark lighter,
goggles, and portapack bottle trolley.
• Oxy/Acetylene kit supplied boxed
Code Description
WGCKA-2G-PKIT 5m Hoses
2 GAUGE GAS CUTTING KIT CUTTING AND WELDING KIT CUTTING AND WELDING KIT
Precision engineered single stage
regulators. Accurate outlet
adjustment knob, outlet gauge,
and bottle contents gauge.
• BS EN150 2503 spec
Code Description
WGROX-2 Oxygen 2 Gauge
WGRAC-2 Acety lene 2 Gauge
SINGLE STAGE REGULATOR
No gauge design makes these
regulators ideal for site work and mobile
use. Pressure is set by markings around
adjustment knob.
• BS EN150 2503 spec
• Fits all standard cylinders
Code Description
WGROX-P Oxygen
WGRAC-P Acetylene
WGRPP Propane
PLUGGED REGULATOR
2 Stage design means better accuracy
and life than standard regulators.
Twin diaghram for greater gas control.
• Twin diaphragm design
• Oxygen, Acetylene & Argon
Code Description
WGRMAC-2 Acetylene 2 Gauge
WGRMO-2 Oxygen 2 Gauge
MULTI STAGE REGULATOR
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 11/22Visit our website on www.onsite-support.co ONSITE SUPPORT 295
WE L DI N G
Straight line track mounted gas cutting
machine, ideal for plate cutting on
workshop or site. Supplied with 1 x
1.8m track, and more can be joined.
• Cuts and bevels 5-50mm thick plate
Code Description
WPGASLC 110 Volt, 1.8m Track
STRAIGHT LINE GAS CUTTER
Well-balanced cutting torch madeto BS6503. Use with a range of
nozzles to cut mild steel. Secure grip
handle, pressure adjustment valves,
and cutting lever.
• Longer lengths up to1.5m available
Code Description
WGT1890 18”, 90 Degree
WGT2790 27”, 90 Degree
WGT3690 36”, 90 Degree
CUTTING TORCH
Heavy duty Oxy/Acetylene cutting
nozzles to use with nozzle mix torch.See cutting chart for cut capacity.
• Cuts from thin plate to 300mm
Code Description
WGNANM-132 1/32”, Up To 6mm Cut
WGNANM-364 3/64”, Up To 13mm Cut
WGNANM-116 1/16”, Up To 75mm Cut
WGNANM-564 5/64”, Up To 100mm Cut
WGNANM-332 3/32”, Up To 150mm Cut
WGNANM-18 1/8”, Up To 300mm Cut
CUTTING NOZZLE OXY/ACET
Heavy duty Oxy/Propane cutting nozzles
to use with nozzle mix torch. See cuttingchart for cut capacity.
• Cuts from thin plate to 300mm
Code Description
WGNPNM-132 1/32”, Up To 6mm Cut
WGNPNM-364 3/64”, Up To 13mm Cut
WGNPNM-116 1/16”, Up To 75mm Cut
WGNPNM-564 5/64”, Up To 100mm Cut
WGNPNM-332 3/32”, Up To 150mm Cut
WGNPNM-18 1/8”, Up To 300mm Cut
CUTTING NOZZLE OXY/PROP
Track type pipe cutter - smooth gear-driven action. Cuts on pipes up to 4ft
with 2.4m chain supplied.
• Cuts and bevels (5-50mm wall)pipe and tube
Code Description
WPGAPC Up to 4ft
MANUAL PIPE GAS CUTTER
Professional quality injection torches,
for Oxy/Propane cutting. Powerful and
economical to use. Greatly improved
gas consumption.
• Wide range of nozzles available
Code Description
WGTINJ18 18” 450mm
HARRIS INJECTOR TORCH
Harris nozzles use a special injection
system to give incredible speed and
economy, especially on Oxy/Propane.
• Greatly improved gas consumption
Code Description
WGN6290 1, 2, 3, 4, 5NFF available
HARRIS CUTTING NOZZLE
600mm long powerful propane torches
for general purpose burning, heating,
and preheating for welders. 5m Hose.
• Ideal for preheating and burning
Code Description
HPROT5M 600mm, 1 Head
PROPANE HEATING TORCH
LINKED PRODUCTS
Eye protection for gas
cutting, see page 156
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 12/22e [email protected] t 0800 781 9765 f 0845 330 1373296 W E L D I N G
Industrial multi-function torch that can weld
mild steel up to 1”, cut up to 6” and can be
used for heating and flame washing.
• Fully adjustable
Code Description
WGT4SH Shank
WGT4CA Cutting Attachment
WGT4MA Acety lene Mixer
WGT4 Range of Nozzles
TYPE 4/5 KIT
Powerful arc air gouging torch with
straight head design. Ideal for weld crack
or defect removal, plant repairs etc.
• 6ft package c/w lead and air hose
Code Description
WGGT600 600A torch 6ft complete
WGGT1200 1200A torch 6ft complete
GOUGING TORCH
Ideal for weld crack or defect removal,
plant repairs etc. Carbon/graphite blend.
• Clean efcient gougingin most metals
Code Description
WGGC06 6 x 305mm, Pk100
WGGC08 8 x 305mm, Pk100
WGGC10 10 x 305mm, Pk100
WGGC13 13 x 305mm, Pk100
GOUGING CARBONS
Strong one-piece cylinder key for
opening or closing all standard UK
cylinders. Drop forged.
• Full range of nozzles available
Code Description
WGACK Cylinder Key
CYLINDER KEY
Heating neck and nozzles for oxy/
acetylene use with the Type 4 system.
Ideal for a wide range of applications.
• For Oxy/Acetylene use
Code Description
WGNAO25 AHT25
WGNA050 AHT50
WGNA100 AHT100
HEATING NECK AND NOZZLES
High quality hose sets fitted with 3/8”
BSP connectors and hose check valves.
Red coded for Acetylene.
• Fully Compliant toBS EN559 Spec
Code Description
WGHA10 10mm x 5m
WGHA10 10mm x 10m
WGHA10 10mm x 20m
WGHA10 10mm x 30m
ACETYLENE HOSE
High quality hose sets fitted with 3/8”
BSP connectors and hose check valves.
Blue coded for Oxygen.
• Fully Compliant toBS EN559 Spec
Code Description
WGHO10 10mm x 5m
WGHO10 10mm x 10m
WGHO10 10mm x 20m
WGHO10 10mm x 30m
OXYGEN HOSE
High quality hose sets fitted with 3/8”
BSP connectors and hose check valves.
Orange colour coded for propane.
• Fully Compliant toBS EN559 Spec
Code Description
WGHP10 10mm x 5m
WGHP10 10mm x 10m
WGHP10 10mm x 20m
WGHP10 10mm x 30m
PROPANE HOSE
Y Piece with valves for splitting another
set of hoses off. Widely used in TIG
welding to give one torch gas line andone purging gas line.
• 3/8” BSP standard ttings
Code Description
WGBYV-R RH Thread for Oxygen and Argon
WGBYV-LLH Thread for Acetylene andPropane
Y PIECE WITH VALVE
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 13/22Visit our website on www.onsite-support.co ONSITE SUPPORT 297
WE L DI N G
• a
Handy cased set of reamers and a file for
cleaning and unblocking cutting nozzles.
• Metal case
Code Description
WGANC Nozzle Cleaner Kit
NOZZLE CLEANER KIT
Features include flame arrestor, filter
and thermal cut-off valve. Will auto-reset
from minor flashbacks.
• Economical auto reset ashback
Code Description
WGFBRM-O Oxygen
WGFBRM-F Acetylene or Propane
INLINE FLASHBACK ARRESTOR
Industrial O-Clips for crimping over the
end of hose tails, splicers etc.
• WGCBOC-18 ts 10mm dia hose
Code Description
WGBOC 5/16” – 7 -9mm
WGBOC 7/16" – 9 -11mm
WGBOC 1/2” - 11-13mm
WGBOC 9/16" – 13 -15mm
WGBOC 19/32" – 15 -17mm
WGBOC 5/8" – 15 -18mm
WGBOC 3/4" – 17 -20mm
HOSE O CLIPS
Hose splicers for joining hose. Use with
O-clips. Threaded couplers available.
• Range of sizes available
Code Description
BHRC6-6 10-10mm
HOSE SPLICERS
Ideal for making up new hoses. Useful
for hose repair work.
• High leverage design
Code Description
WGBOC-PLR O Clip pliers
O-CLIP PINCERS
Reliable spark lighters for safe and easy
ignition of gas torches. 3 flint design for
quick, easy changing of flints.
• Replacement spark ints available
Code Description
WGAL3 3 Flint
WGALSF Spare Flints
GAS SPARK LIGHTERS
Resettable flashback arrestor. Includes
flame trap, flame arrestor, resettable
automatic cut-off valve, non return valve
and filter.
• Heavy duty ashback
Code Description
WGFBRS-O Oxygen
WGFBRS-F Acetylene or Propane
RESETTABLE FLASHBACK
Sturdy gas trolley, welded connections
and large wheels for easy site use.
• Full range available, design varies
Code Description
WGATOP Oxy/Propane Large Trolley
WGATOA Oxy/Acetylene Large Trolley
GAS BOTTLE TROLLEY
Strong drop-forged spanner and cylinder
key for hose nuts, regulator nuts and
opening or closing of gas bottles.
• Standard euro sizes
Code Description
WGACS Bottle Spanner/Key
BOTTLE SPANNER AND KEY
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 14/22e [email protected] t 0800 781 9765 f 0845 330 1373298 W E L D I N G
250Amp 230 Volt 32Amp
supply, compact MIG welder,
21 step settings, supplied
with 3M MB25 torch, earth
lead and regulator.
• 2 year warranty
• 21 step settings
Code Description
WPR-CMIG250 230 Volt
250AMP 230 VOLT COMPACT MIG WELDER
Specification
Power Output 250Amp
Duty Cycle 40%
Input voltage 230 Volt
Height 900mm
Width 440mm
Length 750mm
Weight 85kg
The Powertec 305 has been
built as multipurpose unit for
all medium construction and
fabrication tasks.
• 3 year warranty
• 4 roll pro wire feed
Code Description
WPL-MIGAC-3054 415 Volt
300AMP 415 VOLT COMPACT MIG WELDER
Specification
Power Output 300Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 810mm
Width 467mm
Length 930mm
Weight 95kg
Designed to work perfectly
with the Lincoln Ranger and
Vantage machines, the robust
LN25 feeder is widely used
by site fabricators, fitters, on
many different applications.
• Takes the full range ofInnershield, gasless andstandard wires
• 3 year warranty
Code Description
WPL-LN25 Feeder
SITE MIG FEEDER
Specification
Wire feed
speed
1.27-17.8
M/Min
Control Voltage 10-110 Volt DC
Wire size range 0.6-2.0mm
Connector Euro type
Height 354mm
Width 188mm
Length 356mm
Weight 17kg
315Amp 415 Volt supply,
compact MIG welder, 21 step
settings, supplied with 3M
MB36 Binzel torch, earth leadand regulator.
• 2 Year warranty
• Ready to weld packages
Code Description
WPR-CMIG315 415 Volt
315AMP 415 VOLT COMPACT MIG WELDER
Specification
Power Output 315Amp
Duty Cycle 40%
Input voltage 415 Volt
Height 900mm
Width 440mm
Length 750mm
Weight 85kg
This incredibly versatile
powersource is capable of
delivering Stick, DC TIG, MMA,
flux-cored, and arc gouging.
• 3 Year Warranty
• Perfect for heavy dutysite welding
Code Description
WPL-MIGMP-V350 415 Volt
INVERTEC V350 PRO INVERTER WELDER
Specification
Power Output 350Amp
Duty Cycle 60%
Input voltage 415 Volt
Height 376mm
Width 338mm
Length 709mm
Weight 38kg
LINKED PRODUCTS
Range of welding helmets,
see pages 148-149
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 15/22Visit our website on www.onsite-support.co ONSITE SUPPORT 299
WE L DI N G
315Amp 415 Volt supply
seperate wirefeed unit MIG
welder,
21 step settings, supplied with
3M Binzel torch, earth lead,
5M intercons and regulator.
• 2 year warranty
• Ready to weld package
Code Description
WPR-CMIG315S 415 Volt
315AMP 415 VOLT SWF MIG WELDER
Specification
Power Output 315Amp
Duty Cycle 40%
Input voltage 415v
Height 1300mm
Width 440mm
Length 750mm
Weight 108kg
This high value, high power
MIG welder option delivers
quality weld performance
and high specification.
• 2 year warranty
• Watercooled package
Code Description
WPL-MIGWA-450-S 415 Volt
450AMP 415 VOLT WATERCOOLED MIG WELDER
Specification
Power Output 420Amp
Duty Cycle 40%
Input voltage 415 Volt
Height 1500mm
Width 910mm
Length 1010mm
Weight 162kg
The 380Amp Bester MIG
welder is an industrial aircooled
welding plant used for medium
structural steel welding.
• 2 year warranty
• Industrial transformer
Code Description
WPL-MIGAC-380-S 415 Volt
380AMP 415 VOLT SWF MIG WELDER
Specification
Power Output 360Amp
Duty Cycle 40%
Input voltage 415 Volt
Height 1300mm
Width 440mm
Length 750mm
Weight 108kg
This powersource is designed
for high intensity applications
such as offshore or heavy
fabrications.
• 3 year warranty
• Ready to weld package
Code Description
WPL-MIGWA-505-S 415 Volt
500AMP 415 VOLT WATERCOOLED MIG WELDER
Specification
Power Output 500Amp
Duty Cycle 60%
Input voltage 415 Volt
Height 1610mm
Width 300mm
Length 610mm
Weight 170kg
450Amp 415v supply
seperate Wirefeed Unit
MIG Welder for heavy duty
aircooled MIG welding,
supplied with LED meters.
• 2 year warranty
• 30 step settings
Code Description
WPR-CMIG450S 415 Volt
450AMP 415 VOLT SWF MIG WELDER
Specification
Power Output 450Amp
Duty Cycle 40%
Input voltage 415 Volt
Height 1300mm
Width 440mm
Length 750mm
Weight 150kg
This unit is a powerful inverter
powersource for premium
MIG and stick applications,
with digital communication.
• 3 year warranty
• Top of the range package
Code Description
WPL-MIGST-500 415 Volt
500AMP 415 VOLT INVERTER WELDER
Specification
Power Output 500Amp
Duty Cycle 60%
Input voltage 415 Volt
Height 1610mm
Width 700mm
Length 1030mm
Weight 48kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 16/22e [email protected] t 0800 781 9765 f 0845 330 1373300 W E L D I N G
Full function digital control
panel 230 Volt 200Amp pulse
DC TIG package include torch,
earth, regulator, gas hose and
torch consumable kit.
• 3 year warranty
• Dual LED display
Code Description
WPR-TIG200 230 Vo lt
DIGITAL 200AMP DC TIG WELDER
Specification
Power Output 200Amp
Duty Cycle 35%
Input voltage 230 Volt
Height 320mm
Width 200mm
Length 430mm
Weight 10.5kg
Bestselling 415 Volt TIG
widely used for industrial site
fabrications for process and
pipework fabrications
• 2 year warranty
• Powerful and reliable
Code Description
WPLV270-TP 415 Vo lt
270AMP INVERTER TIG WELDER
Specification
Power Output 270Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 385mm
Width 215mm
Length 480mm
Weight 13.5kg
This popular TIG unit offers a
max power of 160Amp on 230
Volt and 105amps on 110 Volt.
• 2 year warranty
• Full TIG pulsing
Code Description
WPLV160-TP-2V 110/230 Volt
160AMP DUAL VOLTAGE TIG WELDER
Specification
Power Output 160Amp
Duty Cycle 35%
Input voltage 110/230 Volt
Height 400mm
Width 170mm
Length 325mm
Weight 10kg
200amp 110-230 Volt Dual
voltage DC TIG Welder with
full featured pulse, supplied
with Torch, earth lead, gas
hose, regulator and torch
consumables kit
• 2 year warranty
• Full featured pulse settings
Code Description
WPR-TIG200DV 230 Volt
200AMP 110-230 VOLT DC TIG/STICK WELDER
Specification
Power Output 200Amp
Duty Cycle 35%
Input voltage 110/230 Volt
Height 425mm
Width 195mm
Length 310mm
Weight 18.0kg
230 Volt 7 litre tank water
cooler 8.5 L/min flow rate,
cools up to 600 amps.
• 2 year warranty
• Retrots to any TIG welder
Code Description
WPR- WC230D 230 Volt
230 VOLT WATER COOLER
Specification
Power Output N/A
Duty Cycle N/A
Input voltage N/A
Height 480mm
Width 251mm
Length 346mm
Weight 16kg
Popular user-friendly and
lightweight Lincoln machine,
Pulse TIG options, HF TIG
and Stick MMA welding.
Autoswitch dual voltage, just
change the plug.
• 2 year warranty
Code Description
WPLV205-T-MV 230 / 415 Volt
INVERTEC DC TIG WELDER
Specification
Power Output 200Amp
Duty Cycle 35%
Input voltage 230/415 Volt
Height 385mm
Width 215mm
Length 480mm
Weight 16.8kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 17/22Visit our website on www.onsite-support.co ONSITE SUPPORT 301
WE L DI N G
Full function digital control
panel Pulse 230 Volt 210Amp
AC / DC TIG package include
torch, earth, regulator, gas hose
and torch consumable kit.
• 3 year warranty
• Digital control panel
Code Description
WPR-TIG210 230 Vo lt
DIGITAL 210AMP AC / DC TIG WELDER
Specification
Power Output 210Amp
Duty Cycle 35%
Input voltage 230 Volt
Height 420mm
Width 210mm
Length 445mm
Weight 17kg
This powerful inverter boasts
perfect performance with
its unique LCD interface
display, offering all unrivaled
adjustability on welding and
arc parameters.
• 2 year warranty
• Powerful and reliable
Code Description
WPL-V320-AC 415 Volt
INVERTEC V320 AC DC WELDER
Specification
Power Output 320Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 432mm
Width 280mm
Length 622mm
Weight 33kg
Full function digital control
panel pulse 415v 500Amp
AC/DC TIG package includes
torch, earth, gas hose and
torch consumable kit.
• 3 year warranty
• Dual LED displays
Code Description
WPR-TIG500 415 Vo lt
DIGITAL 500AMP AC / DC TIG WELDER
Specification
Power Output 500Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 490mm
Width 225mm
Length 480mm
Weight 33kg
Full function digital control
panel Pulse 415 Volt 320Amp
AC/DC TIG package include
torch, earth, regulator, gas
hose and torch consumable kit.
• 3 year warranty
• 10 job stores
Code Description
WPR-TIG320 415 Vo lt
DIGITAL 320AMP AC / DC TIG WELDER
Specification
Power Output 315Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 490mm
Width 225mm
Length 480mm
Weight 27kg
Unique Multivolt 110/230 AC /
DC inverter for site welding. Full
range of programmes and fully
adjustable waveform control.
• 2 year warranty
• Foot pedal available
Code Description
WPLV205-TP-MV 110 / 230 Volt
INVERTEC AC / DC TIG WELDER
Specification
Power Output 200Amp
Duty Cycle 40%
Input voltage 110/230 Volt
Height 380mm
Width 210mm
Length 480mm
Weight 18kg
LINKED PRODUCTS
Fire protection equipment,
see pages 217-219
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 18/22e [email protected] t 0800 781 9765 f 0845 330 1373302 W E L D I N G
Auto adaptive arc force give the
smoothest weld performance.
Crips and Soft arc settings.
• 2 year warranty
• Hot start feature
Code Description
WPLV145-52V 110/230 Volt
DUAL VOLTAGE STICK INVERTER WELDER
Specification
Power Output 145Amp
Duty Cycle 35%
Input voltage 110/230 Volt
Height 288mm
Width 158mm
Length 392mm
Weight 6.0kg
The Invertec 270SX is a latest
generation welding plant
built for heavy duty site or
workshop applications
• Professional inverter stickwelder
• Powerful and compact
Code Description
WPL-V270-SX 415 Volt
INVERTER 270SX STICK INVERTER WELDER
Specification
Power Output 270Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 389mm
Width 247mm
Length 480mm
Weight 22kg
Chopper inverter technology
for superb smooth welding
performance. Auxilliary output
for fixed speed power tools.
• 1 year warranty
• Ideal for genie lift orupstairs work
Code Description
WPGWM-150 Petrol Weldergen
PETROL WELDER GENERATOR 150
160Amp 110-230 Volt Dual
voltage MMA welding package
supplied with MMA lead set
and carry case.
• 2 year warranty
• Ready to weld incarry case
Code Description
WPR-M160DV 110/230 Volt
160AMP 110-230 VOLT STICK INVERTER WELDER
Specification
Power Output 160Amp
Duty Cycle 35%
Input voltage 110/230 Volt
Height 290mm
Width 130mm
Length 210mm
Weight 6.0kg
The Invertec 400SX is a latest
generation welding plant with
capacity for up to 6.3mm
welding electrodes.
• Professional inverter stickwelder
• Powerful and compact
Code Description
WPL-V400-SX 415 Volt
INVERTER 400SX STICK INVERTER WELDER
Specification
Power Output 400Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 455mm
Width 301mm
Length 618mm
Weight 36kg
Network Rail approved
Weldmaker 165SP2.
• Welding up to4.00mm electrodes
• Welding and auxiliaryoutputs can be used
Code Description
WDG-AG-165 Petrol Weldergen
PETROL WELDER GENERATOR 165
Specification
Power Output 160Amp
Duty Cycle 60%
Output 110 Volt
Height 480mm
Width 360mm
Length 240mm
Weight 34kg
Specification
Power Output 165Amp
Duty Cycle 60%
Output 110 Volt
Height 630mm
Width 494mm
Length 687mm
Weight 60kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 19/22Visit our website on www.onsite-support.co ONSITE SUPPORT 303
WE L DI N G
Best selling 200Amp mobile
plant with the benchmark
HONDA GX390 engine.
Easy start unit with Sincro
welding unit.
• 1 year warranty
• Available frame mount ortrolley mount
Code Description
WPGW200-AC Petrol Weldergen
PETROL WELDER GENERATOR 200AC
DC welder generator plants
give the best welding
performance, with smooth arc
characteristics on most kinds
of rods, even low hydrogen.
• 1 year warranty
• Welds up to 4.0mmelectrodes
Code Description
WPGW200-AC Petrol Weldergen
PETROL WELDER GENERATOR 200DC
Kubota engine heavy
duty ArcGen machine,
widely used in marine,process and engineering.
Continuous welding with
4.0mm electrodes.
• 1 year warranty
Code Description
WDG-AG-200 Diesel Weldergen
DIESEL WELDER GENERATOR 200
Robust and reliable diesel
welder generator with great
power to weight ratio – ideal
for van mounts or road tow.
• Welding up to 6mmelectrodes
• 60dB(A) @ 7metres
Code Description
WDG-AG-300 Diesel Weldergen
DIESEL WELDER GENERATOR 300
This inverter based welder
generator is a more powerful
version of the 150, giving high
power for low weight.
• 2.0KW 110v output
• Honda engine
Code Description
WPGWM-211 Petrol Weldergen
PETROL WELDER GENERATOR 200
Powerful versatile heavy duty
welder generator with rugged
Perkins engine. MMA stick,
Cellulosic, DC tig, arc gouging
to 10mm. Ideal for intensive
welding and site use.
• 3 year warranty
Code Description
WPL-V500 Diesel Weldergen
LINCOLN VANTAGE WELDER GENERATOR
Specification
Power Output 200Amp
Duty Cycle 35%
Output 110/230 Volt
Height 710mm
Width 640mm
Length 1050mm
Weight 95kg
Specification
Power Output 200Amp
Duty Cycle 35%
Output 110/230 Volt
Height 710mm
Width 640mm
Length 1050mm
Weight 105kg
Specification
Power Output 300Amp
Duty Cycle 60%
Output 110 Volt
Height 740mm
Width 680mm
Length 1270mm
Weight 300kg
Specification
Power Output 200Amp
Duty Cycle 60%
Output 110 Volt
Height 880mm
Width 770mm
Length 1030mm
Weight 210kg
Specification
Power Output 500Amp
Duty Cycle 60%
Output 110/230/415Volt
Height 915mm
Width 642mm
Length 1524mm
Weight 559kg
Specification
Power Output 200Amp
Duty Cycle 60%
Output 110 Volt
Height 520mm
Width 490mm
Length 610mm
Weight 57kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 20/22e [email protected] t 0800 781 9765 f 0845 330 1373304 W E L D I N G
30Amp 110-230 Volt dual
voltage plasma cutter, 8mm
230 Volt genuine clean cut,
supplied with 4.5m torch
ready to cut package.
• 2 year warranty
• 8mm clean cut in steel
Code Description
WPR- P30Dv 415v
30AMP 110-230 VOLT PLASMA CUTTER
Specification
Power Output 30Amp
Duty Cycle 35%
Input voltage 110/230 Volt
Height 390mm
Width 190mm
Length 290mm
Weight 14kg
100Amp 415 volt plasma
cutter, 31mm genuine clean
cut. 40mm severance cut.
Package includes torch, earth
and regulator.
• 3 years warranty
• 31mm genuine clean cuton steel
Code Description
WPR-P100 415v
100AMP PLASMA CUTTER
Specification
Power Output 100Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 570mm
Width 330mm
Length 600mm
Weight 22kg
This unique machine can
work with external compressed
air supply to cut up to 10mm, or
use its own internal compressor
for ultimate portability.
• 2 year warranty
• No external airsupply needed
Code Description
WPLPC210 230v
25AMP PLASMA CUTTER WITH COMPRESSOR
Specification
Power Output 25Amp
Duty Cycle 20A @ 60%
Input voltage 230 Volt
Height 385mm
Width 215mm
Length 480mm
Weight 18.5kg
60Amp 415 Volt plasma
cutter 21mm genuine clean
cut, 30mm severance cut.
Package includes torch, earth
and regulator.
• 3 years warranty
• 21mm clean cut
Code Description
WPR-P60 415v
60AMP PLASMA CUTTER
Specification
Power Output 60Amp
Duty Cycle 35%
Input voltage 415 Volt
Height 570mm
Width 330mm
Length 600mm
Weight 18kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 21/22Visit our website on www.onsite-support.co ONSITE SUPPORT 305
WE L DI N G
Portable fume extraction
and filtration unit, with twin
2 speed motors. Automatic
start/stop with the welding arc.
• 1 year warranty
• Range of extraction nozzleswith magnetic foot
Code Description
WPLMFX-110 110 Volt
WPLMFX-230 230 Volt
MINIFLEX
Specification
Motor voltage 110 or 230 Volt
Airflow 230m3 /hr
Height 254mm
Width 145mm
Length 350mm
Weight 15kg
Powerful 6 blade 310mm
diameter fan moves large
volumes of air to cool, ventilate
and extract fumes and dirty air.
• 1 year warranty
Code Description
WPBRF-110 110 Volt
WPBRF-230 230 Volt
AIR DUCT SITE EXTRACT
Specification
Motor Voltage 110 or 230 Volt
Output 3250m3 /hr
Height 500mm
Width 410mm
Length 740mm
Weight Varies with hose
Bestselling mobile fume
extractor and filtration unit
with large capacity main filter.
Arc sensitive start/stop switch.
Suitable for heavy fumes.
• 1 year warranty
• Unit and arm sold asseperate parts
Code Description
WPLM200M-110 110v Unit
WPLM200M-230 230v Unit
WPLM200M-ARM 3M Arm
MOBIFLEX
Specification
Motor voltage 110 or 230 Volt
Airflow 735 cfm
Height (plus arm) 900mm
Width 810mm
Length 1210mm
Weight 111kg
Honda engines for reliability
and good starting. Low oil cut
out safety feature. Brushless
maintenance free alternator.
Frame mount for security,
wheels and handle kits available.
• 1 year warranty
• Electric start, trolleymount, 110 Volt onlyoptions available
Code Description
PGSHM-27K 2.7 KVA
PETROL GENERATOR – 2.7KVA
Specification
Power Output (Amps) 2.7 KVA
230V Sockets Options
110V Sockets Options
Height 410mm
Width 420mm
Length 610mm
Weight 36kg
Honda engines for reliability
and good starting. Low oil cut
out safety feature. Brushless
maintenance free alternator.
Frame mount for security,
wheels and handle kits available.
• 1 year warranty
• Electric start, trolleymount, 110 Volt onlyoptions available
Code Description
PGSHM-50K 5.0 KVA
PETROL GENERATOR – 5.0KVA
Specification
Power Output (Amps) 5.0 KVA
230V Sockets Options
110V Sockets Options
Height 540mm
Width 480mm
Length 690mm
Weight 59kg
Honda engines for reliability
and good starting. Low oil cut
out safety feature. Brushless
maintenance free alternator.
Frame mount for security,
wheels and handle kits available.
• 1 year warranty
• Electric start, trolleymount, 110 Volt onlyoptions available
Code Description
PGSHM-60K 6.5 KVA
PETROL GENERATOR – 6.0KVA
Specification
Power Output (Amps) 6.5 KVA
230V Sockets Options
110V Sockets Options
Height 540mm
Width 480mm
Length 690mm
Weight 71kg
8/11/2019 Welding OnSite Support Catalogue 2012v1
http://slidepdf.com/reader/full/welding-onsite-support-catalogue-2012v1 22/22
G
SPECIALIST HIRE
Contractors come to us for the type of innovative
products that cannot be found through a regularplant hire company.
When it comes to plant hire, OnSite Support
works only at the specialist end of the market,
with a strong emphasis on metalworking
equipment. Many of our customers rely on us
to keep them up-to-date on newly launched
equipment designed to fulfil very specialist roles.
Work with us and discover how we can help you
make significant savings on plant procurement.
SPECIALIST HIRE