WAGO Energy Data ManagementEfficiency Is That Easy!

Find out more here:www.wago.com/energymanagement

2

MEASUREMENT SYSTEM WITH ADDED VALUE

This user-friendly solution, consisting of software combined with a modular control system, records measurement data from different media and influential factors for energy monitoring and pro-cesses them for further analyses, archiving and reporting.

With application controllers from the high- powered PFC200 family, data from meters and sensors can be easily collected by one conve-nient input module and parameterized through the available software application – no program-ming necessary.

Easy parameter setting – not programming

PFC200 Application Controller(750-8202/000-022 and 750-8207/000-022)

3

ADVANTAGES:• Modular energy and process data collection, management and visualization

User-friendly energy data evaluation and derivation of efficiency plans• Easy input parameterization via Web visualization No programming experience required• Connect existing sensors to the WAGO-I/O-SYSTEM Integration into existing systems for flexibility and maximum return on investment• Scalable, modular I/O system Hassle-free expansions at any time

750-820x/ 000-022

15-minute pulse (power supply)

S0 counter,pulse counter

Current and voltagemeasurement

Flow, pressure,temperature, etc.

Computer Database

WAGO-I/O-SYSTEM 750

ETHERNET

Switch on and offDO

DI

DI 3-PH M-Bus

AI EnOcean

4

Software• Simple allocation of specific meter

data and sensors• Convenient data logging to suit

your requirements• Transparent function check via

measurement data visualization• Automatically detect hardware

upgrade

RECORD, VISUALIZE AND EVALUATE ENERGY DATA Individual, Easy, Expandable

Controller and Input Modules• High-performance controller with integrated

Webserver• Connect to existing networks via ETHERNET

or WLAN router• Extensive range of analog and digital input

modules for 3-phase power measurement• Interfaces for connecting M-Bus meters and

wireless-based EnOcean sensors

Components for Electrical Energy Measurement• Current transformers for connecting electrical

installations of different rated currents• Voltage taps for voltage measurement• Ready to easily retrofit into existing systems

5

FIVE EASY STEPS To WAGO Energy Data Management

1. Select the hardware needed; information about the I/O modules and current transformers to be used is available under: www.wago.com/io-systems

2. Download the “WAGO Energy Data Management” Software from www.wago.com/application-edm and transfer to the application controller.

3. Install hardware.

4. Set the energy data management parameters.

5. Direct connection via MODBUS TPC/UDP; send CSV files via FTP or FTPS.

We will be glad to assist you if you have questions! Phone: +49 (0) 571 887-222

6

Leistung [kW]

Zeit

FEATURES

Switch Digital Outputs via MODBUS

When higher-level software that functions as MODBUS master is used, digital outputs can be actuated via MODBUS TCP or MODBUS UDP. This way, systems can be switched on or off based on events or time.

This is how it works:

ADVANTAGES:• Event- or time-based system switching via MODBUS master

possible• Defined MODBUS register for easy connection• Load spike prevention

750-820x/000-022

Computer

WAGO-I/O-SYSTEM 750

ETHERNET

MODBUS TCP

7

Easy Configuration and Commissioning

Data Logging

• Cyclical data logging in CSV format for up to 80 channels – save data to an SD card

• Easy export of logged channel overview as CSV data for measurement point documentation

• Automatic detection of connected I/O modules• Transparent, clearly structured configuration pages

No previous programming experience required!

8

Data Transfer

MODBUS Interface • All measurement values for up to 32 connected I/O modules are saved in the defined

MODBUS register area. • Up to 80 measurement channels are saved in the dynamic MODBUS register area,

along with current measurement values and specified measuring point designations. With this approach, you can conveniently transfer pre-specified designations to a higher-order software system.

• Visualize configured data points as line or bar charts via data plotter.

• Visualize several data points over the same time interval for an initial benchmark.

FEATURES

Visualization

9

FTP Function The measurement series saved on an SD card can be transmitted to a previously selected server via FTP or FTPS. This transmission can be actuated either manually or automatically at a user-specified time interval.

Cybersecurity

• The transmission path is secured with OpenVPN or IPsec.• Security functions such as port management, MAC address

filter and firewall are also available. • It is also possible to operate two separate networks on the

controller.

Maximum Return on Investment

• Thanks to its scalability, the modular I/O system can be expanded at any time.

10

FEATURES

Decentralized Measurements via Internal Bus Extensions

In control centers, measurements are often included within several control cabinets. The internal data bus extension offers an economical solution to map these detached measuring points on one controller. Up to ten bus exten-sions are possible for such an application. The physical connection is via patch cable (max. length 5 m per cable)

This is how it works:

In this example, the application controller is installed as an intelligent head station with cor-responding in- and outputs in control cabinet 1. The decentralized detached stations of control cabinets 2 to 10 are connected to the bus exten-sion (750-627) via the end module.

The decentralized detached stations are connected to the bus extension (750-628) via coupler module. The coupler module is equipped with two RJ-45 sockets (input + output) so the network can be routed to the next decentralized station via the second RJ-45 port.

Because the sum currents of the internal local buses are limited, a power supply module (750-613) is recommended for each station.

750-820x/000-022

Control Cabinet 1

750-628

Control Cabinet 2

24 VDC Power Supply e.g., 787-1012

24 VDC Power Supply e.g., 787-1012

11

ADVANTAGES:• Cost-effective detached measurement point connection• Data handling via application controller• Modular expansions at any time

Example: Decentralized Station

Control Cabinet 3 Control Cabinet 10

750-628 750-628

750-628 750-613 E.g., 750-495/000-002 750-600

Supply Module

24 VDC Power Supply e.g., 787-1012

24 VDC Power Supply e.g., 787-1012

Coupler Module for Bus Extension

End ModuleAnalog Input Modules

12

Gateways

M-Bus Master(Item No. 753-649)With the M-Bus Master Module, up to 40 M-Bus meters can be connected to the WAGO Energy Data Management System. The meters are powered directly via the bus.

EnOcean Gateway(Item No. 2852-7101)Wireless telegrams can be received from En-Ocean temperature and humidity sensors via the EnOcean Gateway. The EnOcean Gateway is connected to the WAGO Energy Data Management System via serial interface (Item No. 750-652).

SUPPORTED HARDWARE

Base Unit

750-820x/000-022PFC 200 Application Controller for WAGO Energy Data Management System

The application controller is the basic platform for an energy data management application.

750-600The end module completes the internal data bus, ensuring flawless data transmission.

13

I/O Modules

Module Max. Number

750-402 4-channel digital input, 24 VDC, 3.0 ms

1

750-638 2-channel up/down counter, 24 VDC, 500 Hz

4

750-496 8-channel analog input, 0 … 20 mA/4 … 20 mA, single-ended

2

750-497 8-channel analog input, 0 … 10 VDC / ±10 V, single-ended

2

750-451 8-channel analog input, for resistance sensors

2

750-452 2-channel analog input, 0 … 20 mA / 4 … 20 mA, differential input

1

750-495 3-phase power measurement, 690 V, 1 A

Max. 18 (individually selectable)

750-495/000-001 3-phase power measurement, 690 V, 5 A

750-495/000-002 3-phase power measurement, 690 V, RTC

753-649 M-Bus master

1

750-530 8-channel digital output, 24 VDC, 0.5 A

1

The WAGO Energy Data Management System supports the following WAGO-I/O-SYSTEM modules:

Module Quantity

750-627 End module for bus extension

Max. 1

750-628 Coupler module for bus extension

1 … 10

750-613 Power supply module, 24 VDC system supply

1 … 10

750-600 End module

1 … 10

787-1012 EPSITRON® COMPACT Power Supply, 24 VDC

1 … 10

Components for Decentralized Measurements:

14

SUPPORTED HARDWARE

The Application Controller

The application controller (750-8202/000-022) is equipped with an RJ-45 connector for easy connection to an ETHERNET network.

Accessories

Power Supply Data Recording Commissioning

787-1606 787-1012 758-879/000-001 750-923

Switched-mode power supply, 24 VDC / 2 A

Switched-mode power supply, 24 VDC / 2.5 A

SD memory card, 2 GB WAGO USB communication cable, 2.5 m long

24 VDC are needed to supply the I/O system. An SD memory card meeting industry standards is needed to save measurement values.Recommended: 2 GB

15

No Network Connection – No Problem!

Not all locations that WAGO Energy Management might be used at will have a cable network connec-tion or WLAN modem. For these cases, the applica-tion controller (750-8207/000-022) with integrated mobile modem is available.

FURTHER INFORMATION AVAILABLE HERE:

• Commissioning Tutorial for the Application Controller www.wago.com/start-up-edm-controller

• Product Film “WAGO Energy Data Management” www.wago.com/edm-product-video

• Energy Data Management Documentation www.wago.com/application-edm-doku

Additional information and contacts at: http://www.wago.com/energiemanagement

These application controllers require an antenna, e.g., magnetic base antenna (758-965).

Headquarters +49 571/ 887 - 0Sales +49 571/ 887 - 222Orders +49 571/ 887 - 44 333Fax +49 571/ 887 - 844 169

WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. “Copyright – WAGO Kontakttechnik GmbH & Co. KG – All rights reserved. The content and structure of the WAGO websites, catalogs, videos and other WAGO media are subject to copy-right. Distribution or modification to the contents of these pages and videos is prohibited. Furthermore, the content may neither be copied nor made available to third parties for commer-cial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties.”

WAGO Kontakttechnik GmbH & Co. KGPostfach 2880 · 32385 Minden, GermanyHansastraße 27 · 32423 Mindeninfo@wago.comwww.wago.com 08

88-0

599/

0002

-690

1 –

FLY

ER E

NER

GY D

ATA

MAN

AGEM

ENT

1.1

US –

11/

2017

-00

– Pr

inte

d in

Ger

man

y –

Subj

ect t

o de

sign

cha

nges