USER GUIDE FOR EOBD-Facile Android

  • View
    215

  • Download
    3

Embed Size (px)

Text of USER GUIDE FOR EOBD-Facile Android

  • EOBD-Facile Android 1 Outils OBD Facile copyright

    USER GUIDE FOR

    EOBD-Facile

    Android

  • EOBD-Facile Android 2 Outils OBD Facile copyright

    Introduction :

    EOBD-Facile is a diagnostic application for cars. It will allow you to read the engine and transmission

    defects of all vehicles complying with the following OBD standards

    EOBD (Europe)

    OBDII (USA and Canada)

    JOBD (Japan)

    To learn more about these standards, please visit this page on our website

    http://www.outilsobdfacile.com/obd-presentation.php

    Requirements:

    To use EOBD-Easy you must have:

    1x Bluetooth or WiFi ELM327 interface

    1x phone / tablet with Android version 2.3 or above, with Bluetooth or WiFi capability

    Plugging in your ELM327 interface:

    First, locate your OBD 16 channel diagnostic connector. This must be in the

    passenger compartment.

    Plug your ELM327 interface on the connector. The red indicator light of the

    ELM327 and the flickering of the other indicators confirm that the interface is

    ready to be used.

    Struggling to find your OBD connector? Download our OBD location application:

    https://play.google.com/store/apps/details?id=com.outilsobdfacile.obd.con

    necteur.dlc

    Or visit our website

    http://www.outilsobdfacile.com/location-plug-connector-obd.php

    http://www.outilsobdfacile.com/obd-presentation.phphttps://play.google.com/store/apps/details?id=com.outilsobdfacile.obd.connecteur.dlchttps://play.google.com/store/apps/details?id=com.outilsobdfacile.obd.connecteur.dlchttp://www.outilsobdfacile.com/location-plug-connector-obd.phphttps://play.google.com/store/apps/details?id=com.outilsobdfacile.obd.connecteurhttps://play.google.com/store/apps/details?id=com.outilsobdfacile.obd.connecteur

  • EOBD-Facile Android 3 Outils OBD Facile copyright

    To establish Bluetooth connection:

    After downloading EOBD-Facile to the Play Store, launch it and tap the "Connect" icon from the home screen.

    A window appears listing all the devices already associated (paired) to your device.

    If you are using your ELM327 for the first time, click the "Scan" button to start a search for new devices

    According to the interface you have, the device name may vary. In the example shown, the name is: OBDII

    Click the name of the device to start the connection to it

    For unpaired devices, a PIN code may be requested: type 1234

    PIN request Bluetooth connected, brand choice

  • EOBD-Facile Android 4 Outils OBD Facile copyright

    To establish WiFi connection:

    By default the application will use Bluetooth. To use a WiFi connection, go to the application settings menu and change the "Connection Type".

    ELM327 WiFi uses a specific configuration of the wireless network. To do this go to Android Settings and select the network named

    WiFiOBD

    Tap on the line corresponding to WiFiOBD network and enter the following settings

    Password : 12345678

    Select "Show Advanced Options" : o IP settings : static o IP address : 192.168.0.11 o Gateway : 192.168.0.1

    Then go back into the application and launch the connection

    Note: The setting will be saved by your apparatus; this operation is only necessary at the first connection

    Important: When connected to WiFiOBD network, you cannot access the Internet if you do not have a GSM

    signal (Edge, 2G, 3G or 4G)

  • EOBD-Facile Android 5 Outils OBD Facile copyright

    To establish USB connection:

    From the 3.1 version of Android it is possible, on some devices, to connect a ELM327 USB to your Android phone/tablet using an adapter.

    Warning: To operate with a USB, ELM327 requires that the USB is capable of powering the interface through the micro-USB output of the device. Most manufacturers do not allow this type of function on phones. Tablets are generally compatible with this type of operation. But as for the phones, some manufacturers have not activated this option. Go to the application settings to set the "Connection Type". Choose USB.

    Exit the application (exit by pressing the back button from the home screen), then plug your ELM327 USB to your Android device. If the ELM327 is recognised, a window prompting you to launch the EOBD-Easy application will be displayed.

    Diagnostic - Status :

    Status are useful to know the current state of electronic diagnostics done in the vehicle. It will report the number of trouble codes, the distance and time made since the DTC is present. A list of main systems used and their status are displayed:

    Completed: no problem detected

    Not completed: a problem has been detected or the ECU has not

    been able to perform test on the current system since the last erase

    of DTC

    Not supported: System is not fitted on the vehicle or the

    electronic device do not monitor it

  • EOBD-Facile Android 6 Outils OBD Facile copyright

    Diagnostic Trouble Codes :

    Data troubles codes are classified into 3 types:

    Trouble Code : DTC has been detected and confirmed by the ECU several time and is declared as relevant

    Last Trouble Code: DTC has been detected once and is not yet relevant.

    Permanent Trouble code: DTC has been detected on the vehicle but is not present anymore. Permanent Trouble Code cannot be erased. They are useful to know the history of the vehicle.

    Tip: The list of faults will be displayed according the chronological

    order. Please focus your attention on the first fault, other faults

    may be the consequence of the first one.

    It is possible to save diagnostic result with the tool bar button.

    Saved diagnostic will be available through the History menu.

    Notice: The application has a database which contains many DTC descriptions (more than 5000) but this list is not exhaustive. If the description is not present inside the application database, the following text will be displayed "Description not available". In this case make a research on the internet to find the description associated to the PCode displayed.

    For each troubles codes read by the application, details can be available, tap on the DTC to display the associated screen On the left picture, we can see details for DTC P0670. Engine state when the fault has appeared is the same data that can be found with Freeze frame (see next chapter). You can also share or save this data with the help of the button on the top right of screen. Notice: Following vehicle, information can be more or less precise. Engine State when the fault has appeared is only available with Basic Edition.

  • EOBD-Facile Android 7 Outils OBD Facile copyright

    Diagnostic Freeze frames:

    Freeze frames are a picture of the engine state when the default has been detected. It can be very useful. By default EOBD-Facile will display information linked to the first frame (frame 0). If currently you have 3 defaults recorded inside the ECU, scan frame 0; 1 and 2 to see associated freeze datas for each defaults. Select the frame to display with the Frame button at the top right of the screen.

    Diagnostic Oxygen sensor:

    On gasoline vehicle Oxygen sensors are in charge of calculating the fuel trim adjustment (air-fuel ration). They are very important for a correct engine performance. Those are monitored by the electronic unit and it is possible to know if they work in the range defined by the manufacturer. Select the sensor you wish to display with the top right button called Sensor. Most of the recent vehicles have at least 2 sensors fitted on the exhaust pipe.

  • EOBD-Facile Android 8 Outils OBD Facile copyright

    Diagnostic Monitoring: This screen with display all systems monitored by the electronic unit. Following the vehicle's configuration you can access to data concerning: Fuel, EGR, PM, Air, EVAP... You can check that each system work inside the range defined by the manufacturer. If the value is inside the tolerance it will be displayed in green. Value displayed in red are out of range.

    Diagnostic Erase trouble codes:

    Erasure should be done once the reparation has been made. A warning message will be displayed asking to confirm that operation. This operation will erase all datas link to diagnostic.

    This operation is not to be undertaken lightly; once the deletion has been done, all diagnostic data will have been deleted and it will not be possible to view them anymore. The vehicle will have to have completed new driving cycles before you can rebuild the information. So do the deletion only if you have actually made repairs. Important notice: Erasure of data trouble code must be done with the engine stopped. If the engine is running the application will display an error message and the erasure will fail.

  • EOBD-Facile Android 9 Outils OBD Facile copyright

    Consistency

    This function allows checking if the vehicle sensor's values are inside a plausible range. This function

    should be used with engine started. Software will scan all the sensors to report sensors which can be

    damaged For example: a temperature sensor reporting -40C is due to a short circuit to the ground of the

    sensor itself or a default of harness.

    Diagnosis report

    This function allows make a complete diagnosis of the vehicle. The report can be saved and/or print to see

    it later.

    To generat