Quick Guide To Using SVR-440

www.samsungcctv.com

S A M S U N G D I G I T A L R E C O R D E R Q U I C K G U I D E

1. Live Monitoring 5. Preliminary Checks before Starting OperationAUTO

The live screens are automaticallyswitched in the order of (CH1 CH2

CH3 CH4 ) at the predefinedswitching interval.

Before Power up, be sure to check NTSC or PAL andselect the right monitor out put between Compositeand VGA by using the switch on the rear panel of theunit.

MULTI or Single ScreenPress the ENT button, then the fourconnected channels are displayed on thequad split screens.Press a channel button to see therespective channel only on the screen.

3. Search/Playback Recordings

4. Playback Buttons

1. Press the Search button2. Select either the Time search or the EVENT SEARCH3. Enter Date/Time or select an event from the TIME LINE BAR4. Press a desired search date and time of GO TO

Date with blue color indicate that itcontains recorded data.Select date, channel and event typeand press PLAY button to playback.

Press ENT button to move the cursorto Minute search bar.Select a desired search time on theMinute search bar and press ENTbutton to playback.

Users can enter a desired search dateand time and press PLAY button toplayback.

•REW : Backward Playback. Speed at 1X, 2X, 4X•F/REW : Jump Backward. Playback position moves 1 minute backward•PLAY/PAUSE : Press to Play and pause the Playback screen•F/ADV : Jump Forward. Playback position moves 1 minute forward•FAST : Forward Playback. Speed at 1X, 2X, 4X

2. Recording

Press the REC button to start or stoprecording. REC lamp locatedon the top of the REC button willdisplay recording status.

PRODUCT FEATURES

PRIOR TO USING THE PRODUCT

FUNCTIONAL BUTTON

This is a quick guide covering some of themore frequently used features only. Formore accurate and detailed informationabout the product, please refer to theUser’s Manual.

USB PORT AUTO MENUSEARCH COPY PTZREC REW F/REWPLAY / PAUSE F/ADV FF

ESC

REAR CONNECTION TERMINALSFANRS-485/422 : PTZ Camera control useAUDIO IN : Audio InputVIDEO IN : Camera Input(NTSC/PAL)RS-232DC 12V : DC 12V Power ConnectorSWITCHES : NTSC/PAL, BNC/VGA Select SwitchesVGA : VGA Output for PC MonitorVIDEO OUT : Composite Video OutputAUDIO OUT : Audio OutputALARM OUT : Alarm OutputSENSOR : Sensor InputETHERNET : RJ45 Connector

EVENT SEARCH

TIME LINE BAR

GO TO

Search button Select Time or Event

*Caution : Press to return to previous Menu screen

S A M S U N G D I G I T A L R E C O R D E R Q U I C K G U I D E

SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea, 462-703 • TEL : +82-31-740-8137~8139 • FAX: +82-31-740-8145

1. RECORD SETUPSAMSUNG DVR can be set to use : repeat record or Set the resolution to either 720X480 or 360X240

Select NETWORK & SERIAL SETUP SENSOR

SENSOR1 TYPE N/O, N/C, OFF Select

RECORDING FUNCTION

Key Button

Quick Guide To Using SVR-440

SAMSUNG SVR-440 provides several different recording methods. You can easily select and set any recording method that is most suitable for your environment or needs.

Step 1 : Set Record Setup

Step 2 : Set the details of recording setup MODE : Select one of four recording methods

* N/O : NORMAL OPEN Type SensorN/C : NORMAL CLOSE Type Sensor

Select RECORD SETUP Left/Right button Up/Down buttonKey Button

3. SENSOR SETUPInputs detected and transferred from external sensors are identified as events. Select the switch type of a sensor connected to each channel.

4. Copy(back-up)Back-up the contents of HDD to USB memory stick for backup. Both of Still image and Video can be backup. Maximum backup time of Video is up to 999 seconds.

1. While monitoring, Press Select YES to store the image into HDD

2. Press and select desired date press

press copy button to Insert USB memory stick

1. During the Playback, Press press

Select Video or Still image

2. Select desired date and press Insert USBmemory stick and press copy button

2. EVENT SETUPSAMSUNG DVR can detect any motion on its screen and initiate recording automatically.

Step 1 : Set Record Setup

Select NETWORK & SERIAL SETUP MOTION

* Sensitivity(1~9), Area Setup (full ~ partial zone )

* Please refer to a user's manual for more information.

Key Button

CONTINUOUS Continuous recording mode for 24h for daySCHEDULE Reserved recordingMOTION DETECT Recording is activated when the system detects the motion

from input video images.SENSOR Recording is activated when the system detects the

sensor operation.DISABLE This is a setup mode for not to be recorded

Step 1 : Set Still image Backup

Step 2 : Set Video backup(Only available during Playback mode)