Embed Size (px)
Citation preview
SE427-1: The IF's of Revit®
Ken MurphyBIM Manager, Thornton Tomasetti Inc.
Image courtesy of Hobart, Yanez, Ramos, Maguey, and Martinez
About me
Corporate BIM Manager for Thornton Tomasetti Structural Engineering firm with over 500 staff Architectural Technology graduate from DIT Dublin, Ireland Autodesk user since 1993 (AutoCAD 11 for DOS)
Key Learning for this class:
What’s ‘IF’ all about?
How and where IF statements can be used?
Tips & Best Practices
Examples:
1. Concrete Column Family with Hold / Cardinal Point
2. Embedded “Error Message” in framing family
3. Steel Embed Plate with nested & arrayed Shear Stud
4. Quantity Schedule in project using IF Statements
5. Using Filters to visually data mine the model
What's ‘IF’ all about:
NO!
What's ‘IF’ all about:
Subtle area of Revit that is not documented in depth.
Can extend the capabilities of many schedules and families.
No need for API programming etc. to use these capabilities.
What's ‘IF’ all about:
The basics of IF statement syntax
IF ( something , then do this , or else do this )
What's ‘IF’ all about:
Families and Schedules in Revit can contain Conditional ‘IF’ statements
These are added as formulae inside parameters in Families In Schedules they are added as “Calculated Values”
What's ‘IF’ all about:
What's ‘IF’ all about:
Quick examples of IF’s DEPTH parameter driven by IF statement based on LENGTH
What's ‘IF’ all about:
Quick examples of IF’s YES/NO parameter based on other YES/NO
Using ‘NOT’ to automatically apply a YES/NO condition
What's ‘IF’ all about:
Quick examples of IF’s YES/NO parameters
What's ‘IF’ all about:
Quick examples of IF’s TEXT parameter driven by IF statement based on LENGTH
TEXT parameter based off many IF conditions
What's ‘IF’ all about:
Quick examples of IF’s COST parameter driven by IF based off LENGTH and YES/NO
parameter for FIREPROOFING
AND statement
What's ‘IF’ all about:
Quick examples of IF’s OR statement
Calculate Slope / 12 based on angle
What's ‘IF’ all about:
Quick examples of IF’s Multiple IF statements using parameters of LENGTH, TEXT, YES/NO
and CURRENCY type.
What's ‘IF’ all about:
Doing it the wrong way (Cardinal Hold Point Family)
Tips & Best Practices:
Parameter names are always case sensitive, make sure to type them exactly or IF statements will not work!
Tips & Best Practices:
Avoid using a dash ‘-‘ or hyphen in parameters names (Revit will think you are trying to subtract something in the middle of your statement)
Tips & Best Practices:
Remember that mixed units be converted to a common form to be able to calculate a parameter, e.g. multiplying LENGTH X AREA requires that you divide one of the values by 1.
Weight = Volume / 1 * 490 (490 represents the density of steel)
Tips & Best Practices:
Avoid naming a parameter as a number, as this will cause errors in your statements.
If you really want to name a parameter as a number, first create the parameter as a text name, e.g. “EIGHT”, then create the conditional IF statement referring to that parameter, and then rename the parameter called “EIGHT” after you have successfully made the IF.)
Tips & Best Practices:
It is currently not possible to concatenate parameter values to combine text or numbers. The best solution to this if you want to display the concatenated information in a Label is to make multi-parameter labels with the different values shown.
Tips & Best Practices:
If you want a TEXT parameter to contain no characters or just be blank you can use the format “ ”
Examples:
Example 1:
Concrete Column with Cardinal / Hold Point:
Example 2:
Embed Plate with nested Shear Stud array:
Example 2:
Embedded Error message:
Example 4:
Schedule with Calculated Values
Example 5:
Using Filters to visually mine data from the model:
Summary:
IF’s can extend your model in many ways
Geometry, numbers, arrays, lengths, angles etc can all be
driven by IF’s
Possibilities are endless for conditional statements
Schedules can also be a powerful tool for QA or calcs
Filters are a great way to navigate conditions
T h a n k Y o u !
Please complete the feedback
for this class at the kiosks
Autodesk [and other] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2010 Autodesk, Inc. All rights reserved.
