Embed Size (px)
Citation preview
Wireless
Wire
less
Sy
ste
ms
www.pyronix.com [email protected]
Wireless System MX-RIX8DW
Matrix PCB
MX-IX16
MX-RIX MX-ROX8R
MX-BUS
MX-VOICE MX-LCD
MX-PROX
UT3DWMX-KF4DW KX12DW
INDUSTRIAL / COMMERCIAL / RESIDENTIALMatrix 8 Zone Wireless Remote Expander
Main Features• 868MHz Transceiver FM narrow band technology
• Fully encrypted rolling code
• 300m Free space range
• Advanced jamming detection
• 13 Programming buttons
• 15 Programming LEDs
• Supports 8 zones and 32 key fobs
• Front and rear tampered enclosure
• Up to 2 expanders per system
• Connects to Matrix 424, 832 and 832+
Features Description Benefits
868MHz Transceiver narrow band transmitting frequency
Operates in 868 MHz with only a 25KHz band range Less susceptible to interference and enables a greater range
Transceiver Technology 2 Way communication ensuring all messages are receivedLow battery consumptionNo lost messages or activations with the ability to receive arming confirmation on the key fob
Fully encrypted rolling code All system messages are fully encrypted Prevents hacking. Stops substitution and grabbing
SAW Filter implementation Filters out redundant frequencies Only the correct information is recognised
Advanced jamming detection
Detects high level of RF, but if not recognisable reports jamming Minimises risk of false jamming reports
On-board programming buttons and LEDs
All programming is undertaken at the expander. LEDs show zone and function in use Simple installation and maintenance
Product Features
Bus Diagram
MX-RIX8DW
MX-ICON
Technical Specification
Weights & Dimensions
COMPLIANCE
Europe
PYRONIX PRODUCT CODE
FPRIX8DW
PACKING INFORMATION
Warranty: 5 Years
Manufactured: UK
135mm
50mm
210mm
ELECTRICAL
Operating Voltage 9 - 16V DC (12V nominal)Current Consumption - Idle 100mACurrent Consumption - Communicating 135mATamper Switch 100mA, 12V
OPERATING FEATURES
Operating Temperature -30°C to +70°CStorage Temperature -40°C to +80°C
Battery Test onselected zone
Global SignalStrength test
GlobalCommunications
Test
Delete wirelessdevice from
selected zone
Learn a deviceto a zone
Zone Selection buttons
LED Indications and Programming Buttons
Applications
Features Applications
Signal Strength IndicationThe on-board LEDs clearly indicate the signal strength and enable simple installation of this hybrid wireless system. This means that prior to installation, the optimum locations can be identified for the KX12DW detectors and the MX-RIX8DW to be mounted.
Simple Learning Mode By simply using the learnt button and the appropriate zone button on the MX-RIX8DW, the detector is learnt. The same process is used to delete detectors using the delete button. Confirmation of the process being completed clearly indicated through the use of LEDs on the MX-RIX8DW pcb
Signal Strength Testing (on learnt detectors)Signal Test Button pressed
Green LEDGood signal strength
Red LEDBad signal strength
Signal Test Button pressed
MX-BUS
Bad Result
Good Result
