PanX Installguide Reva

  • View
    215

  • Download
    1

Embed Size (px)

Text of PanX Installguide Reva

  • 8/22/2019 PanX Installguide Reva

    1/67

    CDRPanX Installation Guide

    Schick Technologies, Inc.30-30 47th AvenueLong Island City, NY 11101USA

    (718) 937-5765

    (718) 937-5962 (fax)

    PART NUMBER B1051408 REV. A

  • 8/22/2019 PanX Installguide Reva

    2/67

    Copyright 2008 by Schick Technologies, Inc.

    All Rights Reserved

    November 10, 2008

    Printed in the United States of America

    This document was originally prepared in English

    CDR is a registered trademark of Schick Technologies, Inc and is

    covered by US Patent Numbers 5,912,942 and 6,134,298. Additionalpatents are pending.

    Trademark designations used by other manufacturers and sellers may

    appear in this document also. Where Schick Technologies, Inc. wasaware of a trademark claim, that information has been printed in caps

    or initial caps.

  • 8/22/2019 PanX Installguide Reva

    3/67

    CDRPanX Installati on B1051408 Rev. A i

    Contents

    1. Introduction.................................................................................................1

    1.1. Purpose.................................................................................................................................... 11.2. Indications for Use.................................................................................................................. 11.3. Related Documents................................................................................................................. 11.4. Notice to Installers.................................................................................................................. 21.5. Notice to Users........................................................................................................................ 2

    2. Pre-Installation Information ......................................................................3

    2.1. Inspection................................................................................................................................ 32.2. Specifications.......................................................................................................................... 3

    3. Installation ...................................................................................................5

    3.1. Inspecting the System ............................................................................................................. 63.2. Installing CDRPanX ............................................................................................................... 7

    4. Control Panel Description.......................................................................19

    5. System Test...............................................................................................22

    5.1. Preparation for System Test.................................................................................................. 225.2. Perform System Test............................................................................................................. 225.3. Perform Final Checks ........................................................................................................... 23

    6. Radiation Beam Alignment ....................................................................24

    6.1. Perform Service Test Number 9............................................................................................ 24

    6.2. Remove Sensor Cover........................................................................................................... 266.3. Perform Service Test Number 10.......................................................................................... 266.4. Perform X-ray Beam Alignment Check................................................................................ 266.5. Perform X-ray Beam Alignment........................................................................................... 296.6. Return to Normal Operation ................................................................................................. 30

    7. Lateral Laser Alignment..........................................................................31

    7.1. Initial Conditions .................................................................................................................. 317.2. Position the Phantom and Take an Image............................................................................. 317.3. Evaluate Phantom Image ...................................................................................................... 327.4. Lateral Laser Alignment ....................................................................................................... 33

    8. Removing Covers ....................................................................................348.1. Outer Covers......................................................................................................................... 348.2. Internal Covers...................................................................................................................... 35

    9. Service Tests.............................................................................................36

    9.1. Service Mode ........................................................................................................................ 36

    10.Maintenance..............................................................................................39

  • 8/22/2019 PanX Installguide Reva

    4/67

    ii B1051408 Rev. A CDRPanX Installati on

    10.1.Preventive Maintenance........................................................................................................ 3910.2.Periodic Maintenance............................................................................................................ 39

    11.Functional Description ............................................................................40

    11.1.System Description............................................................................................................... 4011.2.Main Power Supply Unit ...................................................................................................... 4011.3.Power Switching Unit ........................................................................................................... 4211.4.X-ray Tube Head................................................................................................................... 4311.5.Regulation Board .................................................................................................................. 4411.6.Control Unit .......................................................................................................................... 4511.7.Digital Imaging System ........................................................................................................ 46

    12.Removing the Counterweight Assembly.............................................47

    12.1.Remove Column Assembly .................................................................................................. 4712.2.Remove Column Assembly Counterweight.......................................................................... 47

    13.Changing Main Voltage Supply Configuration ...................................50

    13.1.Check the Voltage Configuration ......................................................................................... 5013.2.Changing Voltage Configuration (From 115V To 230V)..................................................... 5213.3.Changing Voltage Configuration (From 230V To 115V)..................................................... 52

    Appendix A. Error Codes ..............................................................................53

    Appendix B. Technical Data..........................................................................54

  • 8/22/2019 PanX Installguide Reva

    5/67

    CDRPanX Installati on B1051408 Rev. A iii

    List of Figures

    Figure 1. Panoramic Imaging Area ................................................................................................. 1Figure 2. Distance Considerations for Wall-Mounted Installations ................................................ 5

    Figure 3. Standard Sole Plate and Hardware................................................................................... 8Figure 4. Aligning the Self-Standing Base with Column Assembly............................................... 8Figure 5. Installing the Self-Standing Base..................................................................................... 9Figure 6. CDRPanX Control Panel ............................................................................................... 19Figure 7. Correct Panoramic X-ray Beam Alignment Verified by Service Test 9........................ 25Figure 8. X-ray Beam Alignment Problem (Sensor Cut Off) Verified by Service Test 9............. 25Figure 9. X-ray Beam Alignment Problem (Beam Misses Sensor) Verified by Service Test 9 ... 25Figure 10. Locating Lines for Phosphor Strip Placement ............................................................. 27Figure 11. Attaching the Phosphor Strip ....................................................................................... 27Figure 12. Correct X-ray Beam Alignment (Left) and Tube Head Alignment Problem (Right) .. 28Figure 13. Collimator Rotation Problem (Left) and...................................................................... 28Figure 14. X-ray Vertical and Rotational Adjustments................................................................. 29

    Figure 15. X-ray Horizontal Adjustments .....................................................................................