Upload
clementine-terry
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
MRS. JONES’S CLASSES
Forming and Forging
Ball Pean Hammer Description:
Wooden handle & double sided metal head.
Flat end is used for: Forging – flattening and stretching the metal.
Round end is used for: Hammer texturing – makes little shiny dots that are small when hit lightly & larger when hit harder.
Located: metal drawer area
Anvil Description:
Harden steel work surface
Uses: Used for forging metal. Allows the metal to stretch more effectively because it “hits” the metal on both sides at once.
Located: in the tall closet on the first shelf.
Rawhide Mallet Description:
Wooden handle & rawhide head.
Uses: This tool is used to work harden metal.
Located: metal drawer area
Flat Nose Jeweler’s Pliers Description:
Two flat jaws and metal handles
Uses: makes flat or squared off shapes in wire.
Located: your assigned kit.
Round Nose Jeweler’s Pliers Description:
Two round jaws and metal handles
Uses: Makes S curves or rounded shapes in wire
Located: your assigned kit.
Chain Nose Jeweler’s Pliers Description:
Two flat jaws that are round on the outside and metal handles
Uses: Makes C shaped curves in wire
Located: your assigned kit.
Half Round Jeweler’s Pliers Description:
One square and one round jaw and metal handles
Uses: Makes complex shapes in wire
Located: in the pliers drawer
Forming Jeweler’s Pliers Description:
One square and one round jaw and metal handles
Uses: Makes complex shapes in wire
Located: the pliers drawer.
Wire Jig Description:
A plastic or metal board with pegs.
Uses: makes many copies of complex shapes out of wire.
Located: See Teacher to sign out.
Ring Mandrel Description:
Tapered plastic rodUses: Makes perfect
circles or ring bands (used with a rawhide mallet) and stretches rings to make them larger (use with a ball peen hammer)
Located: in the marked metal drawer cabinet
Bracelet Mandrel Description:
large oval rod on a mounting frame
Uses: Used to make bracelet shapes (rawhide mallet)
Located: second shelf of the tall cabinet
Dappeling Block/Punch Description:
Harden steel metal block and hardened steel punches
Uses: makes domed metal shapes (use a regular hammer)
Located: in the tall closet on the first shelf
Wire Cutters Description:
Cutting jaws and metal handles
Uses: Cuts wireLocated: in
your assigned kit.
Jeweler’s Saw Description:
C shaped frame and wooden handle
Uses: Cuts shapes out of metal
Located: Hanging in the tall closet – ask teacher for replacement blades
V-Board Description:
Wooden board with a V cut out of it and a silver table clamp.
Uses: Extends the work surface to allow precision metal cutting without ruining the table edge.
Located: in the marked metal drawers cabinet
Ring Clamp Description:
wooded “scissors” and “doorstop”
Uses: Holds small pieces of metal so they are easier to work on
Located: in the tall closet on the second shelf
Flat File Description:
flat blade Uses: to remove metal
in a flat or curved area
Located: in the marked metal drawer cabinet
Round File Description:
Description: circular File
Uses: To file Round areas
Located: Marked metal drawer area
Half Round Hand File Description:
half round blade Uses: to remove metal in a flat or curved areaLocated: in the marked metal drawer cabinet
Jeweler’s Files
Tiny files used to remove tiny bits of metal.Use only when a hand file doesn’t fit!
Hand Files
Large files (larger than your hand) used to remove large amounts of metal.
Use these first!
Steel Wool Description:
Spun metal pad
Uses: To remove scratches
Located: in marked metal drawer
Emery Paper Description:
Black PaperUses: To
remove scratches
Located: in marked metal drawer