With the increasing need for clean, breathable air in paint shops as well as the need

for spraying air to be brought to breathing air quality (especially with waterborne

coatings) we at Dan-Am Company have identifi ed and are now supplying a solution

to augment our air fi ltration systems from SATA.

The Dan-Am Company, which is the exclusive independent distributor of SATA

products in the US and Puerto Rico, began an exhaustive study to fi nd the best,

most capable, easy to install piping system available to supply our customers

needs. DanAm Air was born to do just that, meet our customers needs and exceed

them too. We partnered with a global leader of aluminum compressed air pipe.

Through a partnership agreement, DanAm Air has acquired the rights to provide

a complete DanAm Air System that utilizes the innovative technology features that

provide a cost eff ective, easy to install compressed air piping system. The DanAm Air

system can be integrated into existing air systems such as copper or steel without

compromising performance, making it perfect for upgrades or expansion projects.

Most of today’s paint shops need to replace existing rigid airlines with a clean

piping system. They are currently using metal piping which is fi lled with corrosion,

causing contamination, and poor air-fl ow. The DanAm Air piping is smooth

walled aluminum, and easy to install with its “push to connect” technology. This

dramatically cuts costly labor hours. It provides a smooth contaminant free surface

that has extremely high air-fl ow. Contaminated air, or low air fl ow capabilities cause

signifi cant problems in today’s paint shops. DanAm Air and SATA fi ltration provide

cost eff ective solutions to this dilemma.

The DanAm Air system utilizes “push to connect” technology fi ttings that secures

connections with a simple push and it provides a leak-free guarantee. The aluminum

pipe eliminates corrosion, ensuring the longevity of equipment and helps to

avoid frequent changes of fi ltration elements. The aluminum pipe also eliminates

the issues of manufacturing/cutting oils that are customary in traditional black

pipe threading and jointing that can cause contamination issues in today’s high

performance coatings.

DanAm Air off ers signifi cant savings on installation, maintenance and operating

cost vs. traditional pipe. The quick, instant connections eliminate the need to thread,

solder or glue pipe. Details of labor and cost savings are found on the reverse side of

this fl yer. The DanAm Air products are available throughout North America.

Dan-Am Company off ers to aid in the design and layout of the new piping system.

If we are sent even hand-drawings of the shop layout, together with the distances in

feet, the number of required drops or usage points, and where you would like them,

we can send you back a list of the required piping components as well as the SATA

fi lters and regulators to bring you’re air to 100% clean breathing air quality.

DanAm Air‘s additional benefi ts include:

•• Energy effi cient

•• Lower install costs

•• Push-to-connect technology

•• Immediate pressurization

•• Removable and reusable

•• Modular design

•• No corrosion

•• Leak-free guarantee

•• Full bore design

•• 1/2” - 6” pipe sizes

Visit our website at DanAmAir.com for updates and our digital catalog

DanAm Air is an Advanced Air Piping System for compressed air.

Measure & Cut – Push to Connect

One Sata DrivePO Box 46

Spring Valley, MN 55975Ph: 800-533-8016Fax: 800-633-7282

email: DanAmAir@ satausa.comwww.DanAmAir.com

DanAm Air off ers a cost eff ective, innovative and energy effi cient alumi-num compressed air pipe system that is easy to assemble, change and expand. Labor accounts for only 20 percent of the cost of installing DanAm Air. By comparison, labor accounts for 60 to 80 percent of a steel system and 50 to 70 percent of a copper system. The materials and modular design of a DanAm Air air pipe system makes it quicker and less expensive to install than traditional systems. DanAm Air’s aluminum piping is easier to lift and handle than standard steel piping. The push-to-connect fi ttings secure connections with a simple push, which is much quicker and safer than soldering copper.

DanAm Air’s aluminum pipe ensures a total absence of corrosion. The inner pipe surface consistently delivers clean compressed air. DanAm Air prevents the problems caused by rust, which aff ects galvanized steel systems. Due to consistent clean quality air, from compressor outlets to machines, DanAm Air’s aluminum pipe ensures higher longevity of equipment and avoids frequent changes of fi ltration elements. DanAm Air can also be integrated into existing copper and steel piping without compromising performance, making it perfect for upgrades or expansion projects. DanAm Air’s additional benefi ts include:

• • Energy Efficient •• Modular Design

• • Lower Install Costs •• No Corrosion

• • Push-to-Connect Technology •• Leak-Free Guarantee

• • Immediate Pressurization •• “Full Bore” Design

• • Removable and Reusable • 1/2” - 6” pipe sizes

Compressed air represents one of the largest opportunities for immediate energy savings. Plant management is often surprised to hear that compressed air can represent 20-50% of a plant’s electric bill. Plant management is truly amazed when they fi nd out that using an effi cient piping system specifi cally designed for compressed air can reduce their energy bill by 30-60%, many times within a 24-month period.

For instance, a large industrial plant recently redesigned their compressed air system with DanAm Air. This accounted for 35% savings in the plant’s monthly energy bill, which paid for the system in 15 months. The plant continues to save by:

•• Increased air system reliability •• Reduced maintenance cost and extended equipment life •• Reduced system downtime, increased production rates

The results speak for themselves and show that DanAm Air is the best performing system and the best long-term choice, no matter whether the project is for an extension, the modifi cation of an existing pipe system or a new installation.

Aluminum is an Effi cient Alternative

Renovate Your Steel System with DanAm Air

Savings Chart DanAm Air Threaded Carbon Steel

Copper

Pipe Schedule Painted Alum. Sch 40 Type L

Material

Pipe $ 3,081.00 $ 2,970.00 $ 8,880.00

Fittings $ 1,727.00 $ 642.00 $ 481.00

Material Total $ 4,808.00 $ 3,612.00 $ 8,921.00

Labor Hours 22.35 82.21 60.42

Labor Cost at $65/man hour $ 1,459.90 $ 5,343.65 $ 3,927.30

Total cost $ 6,267.70 $ 8,955.65 $ 12,848.30

DanAm Air

Manhour Savings

vs Threaded Carbon Steel 73%

vs Copper 63%

Total Installed Cost Savings

vs Threaded Carbon Steel 30%

vs Copper 51%

MATERIAL LIST: 500 feet of pipe, 16 elbows, 7 tees, and 10 couplings (unions). Comparison is Dan-

Am Air 1 1/2 s" (40mm) versus 2” pipe. Labor rates from MCAA manual are factored by 0.70, which is typical for estimating fi eld jobs. Pricing subject to change without notice. Alterations Reserved

Your DanAm Air dealer

An Energy Effi cient Solution

Erro

rs a

nd t

echn

ical

alte

ratio

ns r

eser

ved

- Dan

Am A

ir pr

oduc

ts r

efer

ence

d he

re-in

are

eith

er r

egis

tere

d tr

adem

arks

or

trad

emar

ks o

f D

an-A

m C

o. in

the

U.S

. an

d/or

oth

er c

ount

ries.

58

Dan

Am A

irPr

inte

d in

the

US

A 1

20

60

7

Signifi cant Energy Savings