Upload
domien
View
216
Download
0
Embed Size (px)
Citation preview
Schüco Fenster AWS 75.SI Schüco Window AWS 75.SI
Schüco | 5
Schü
coA
WS
75.S
I
Ausgestattet mit zukunftsorien-tierter Wärmedämmung und attraktivem Design erfüllt das Aluminium-Fenstersystem Schüco AWS 75.SI die Wärme-schutzanforderungen von heute und morgen.
6 Systemeigenschaften System features
10 Anwendungsbeispiele Examples
With pioneering thermal insulation and an attractive design, the aluminium window system Schüco AWS 75.SI fulfils the thermal insulation requirements of today and tomorrow.
Schüco Fenster AWS 75.SI Schüco Window AWS 75.SI
Systemeigenschaften System features
� | Schüco
Eigenschaften und Vorteile Hervorragende Wärmedäm-mung bei 75 mm Bautiefe: Uf-Wert von 1,3 W/m²K (Ansichtsbreite von 117 mm) Uw = 1,3 W/m²K mit 2-fach-Verglasung Uw ≤ 1,0 W/m²K mit 3-fach-Verglasung Optimierte Mitteldichtung mit Fahne und Glasanlagedich-tungen mit Schaumkern Neue Geometrie der Glasfalz-dämmung für verbesserte Wärmedämmung und leichtere Verarbeitbarkeit Erweitertes Profilsortiment für vielfältige Lösungsvarianten Verfügbar in den Designserien RL = Residential Line und SL = Soft Line Kompatibel zu Schüco Türen ADS / ADS HD
●
●
●
●
●
●
●
SchücoFensterAWS75.SImit 2-fach-Verglasung und thermisch optimiertem RandverbundSchücoWindowAWS75.SI with double glazing and thermally enhanced edge seal
Schüco Fenster AWS 75.SI optimierter Wärmedämm- standard für AluminiumfensterEnergie zu sparen und Energie zu gewinnen sind zu zentralen Leitbildern der Architektur geworden, unauflöslich verbun-den mit den Themen Sicherheit, Automation und Design.
Vor allem das Schüco Fenster AWS 75.SI ist wesentlicher Bestandteil dieser Entwicklung. Dank verbesserter Wärmedäm-mung Uf = 1,3 W/m²K (Ansichts-breite 117 mm) und erweitertem Profilsortiment erfüllt es besser denn je zukünftige Wärmedämm-standards sowie architektonische Anforderungen an Transparenz und Gestaltungsfreiheiten bei nur 75 mm Bautiefe. In Verbindung mit dem verdeckt liegenden Beschlag Schüco TipTronic können die Energie-einsparungspotenziale mittels Gebäudeautomation optimal ausgeschöpft werden.
Energieeinsparung durch optimiertes Wärmedämmverhalten Saving energy by optimising thermal insulation
Schüco Window AWS 75.SI optimised thermal insulation standard for aluminium windowsSaving energy and generating energy have become central themes for architecture, inextrica-bly linked with the topics of security, automation and design.
Above all, the Schüco Window AWS 75.SI has become an integral part of this development. Thanks to improved thermal insulation Uf = 1.3 W/m²K (117 mm face width) and an extended range of profiles, it fulfils better than ever future thermal insulation standards and architectural requirements for transparency and design freedom with a basic depth of only 75 mm.
In conjunction with the concealed Schüco TipTronic fitting, the energy-saving potential of building automation can be fully exploited.
Features and benefitsOutstanding thermal insulation for basic depth of 75 mm: Uf value of 1.3 W/m²K (face width of 117 mm)Uw = 1.3 W/m²K with double glazing Uw ≤ 1.0 W/m²K with triple glazingOptimised centre gasket with fin and glazing rebate gasket with foam coreGlazing rebate insulation has new geometry for improved thermal insulation and simpler fabricationExtended range of profiles for diverse solutionsAvailable in the RL = Residential Line and SL = Soft Line design seriesCompatible with Schüco Doors ADS / ADS HD
●
●
●
●
●
●
●
Systemeigenschaften Schüco Fenster AWS 75.SI System features Schüco Window AWS 75.SI
Systemeigenschaften System features
Schüco | 7
Schü
coA
WS
75.S
I
In der Bautiefe 75 mm gibt es mit Schüco Fenster AWS nicht nur durch das größere Sortiments-angebot vielfältige Gestaltungs-möglichkeiten. Ob als energe-tische High-End-Lösung mit 3-fach-Verglasung oder als energie-effiziente, wirtschaftliche Aus-führung mit 2-fach-Vergla-sung (Ug = 1,1 W/m²K) und Warm Edge Spacern erfüllen Schüco Fenstersysteme den zukünftigen Schwellenwert der EnEV 2009 von Uw =1,3 W/m²K.
Maßstab1:2Scale1:2
Minimierte Wärmeverluste durch koextrudierte Mitteldichtung mit Fahne Minimal heat loss due to co-extruded centre gasket with fin
Erweiterte Dämmzone mit Schaumverbund-Isoliersteg Enlarged insulation zone with foam-filled insulating bar
Wärmedämmung des Glasfalzes durch Schaumdämmkeil Thermal insulation of glazing rebate with foam insulating wedge
3-fach-Hohlkammer für optimierte Wärmeisolation Triple hollow chamber for optimised thermal insulation
Schüco Fenster AWS 75.SI Systemoptimierung im Profil verbessert die Wärmedämmung und spart Energie Schüco Window AWS 75.SI System optimisation in the profile improves thermal insulation and saves energy
With a basic depth of 75 mm, it is not only the wide product range of Schüco Window AWS that provides numerous design options. Whether as an energy-efficient high-end solution with triple glazing or an energy-efficient, economical construction with double glazing (Ug = 1.1 W/m²K) and warm edge spacers, Schüco window systems meet the future threshold value for EnEV 2009 of Uw =1.3 W/m²K. Infrarotaufnahmen – Thermografien –
zur energetischen Bewertung von Gebäuden Infrared images – thermography – for energy evaluation of buildings
Glasanlagedichtungen mit Moosgummi-Schaumkern Glazing rebate gaskets with microcellular foam core
Systemeigenschaften System features
� | Schüco
PrüfungenundNormen/Testsandstandards SchücoAWS75.SI
Wärmedämmung nach DIN EN ISO 10077-2 / Thermal insulation in accordance with DIN EN ISO 10077-2 Uf = 0,9 - 1,6 W/m²K
Schalldämmung nach DIN EN ISO 140-3 / Sound insulation in accordance with DIN EN ISO 140-3 bis / to Rw 48 dB
Einbruchhemmung nach DIN V ENV 1627 / Burglar resistance in accordance with DIN V ENV 1627 Klasse / Class WK3
Luftdurchlässigkeit nach DIN EN 12207 / Air permeability in accordance with DIN EN 12207 Klasse / Class 4
Schlagregendichtheit nach DIN EN 12208 / Watertightness in accordance with DIN EN 12208 Klasse / Class 9a
Windlastwiderstand nach DIN EN 12210* / Wind load resistance in accordance with DIN EN 12210* Klasse / Class C5/B5
Mechanische Beanspruchung nach DIN EN 13115 / Mechanical loading in accordance with DIN EN 13115 Klasse / Class 4
Dauerfunktion nach DIN EN 12400 / Long term functionality in accordance with DIN EN 12400 Klasse / Class 3
* Durchbiegungsverhalten profilabhängig Profile-dependent deflection
System-Prüfungen System tests
Ergebnisse Luftschalldämmung Für die unterschiedlichen Schall-schutzanforderungen bieten sich folgende Schüco-Systeme an:
Results of airborne sound insulationThe following Schüco systems fulfil the various noise reduction requirements:
Hinweise:Bei Verwendung von Schallschutzgläsern ist darauf zu achten, daß die vom Lieferanten für das Glas angegebenen Schalldämmwerte nach der neuesten Prüfnorm übermittelt wurden. * mit Außendichtung ** Verbund-Sicherheitsglas Silence
Note:When using noise reduction glazing, it is important to ensure that the noise reduction values given by the supplier have been adopted in accordance with the most recent test norms.* with external gasket** Silence laminated safety glass
BewertetesSchalldämm-MaßRw(C;Ctr)indBWeightedsoundinsulationfactorRw(C;Ctr)indB
Schüco-SystemSchücosystem
VerglasungGlazing
Rw-WertGlasindBRwvalueglazingindB
48 (-2;-5)*
Schüco AWS 75.SI
46 mm 14 VSG SI**/24 Argon/8 VSG SI**
51
43 (-1;-3)40 mm
8/24 Argon/8 VSG SI**45
42 (-2;-5)*34 mm
8 VSG SI**/20 Argon/643
36 (-1;-5)26 mm
6/16 Argon/435/36
34 (-2;-5)24 mm
4/16 Argon/4
Systemeigenschaften System features
Schüco | �
Schü
coA
WS
75.S
I
Systemeigenschaften Schüco Fenstersysteme Features of Schüco window systems
Energie Energy
Ungedämmt Non-insulated
Wärmegedämmt Thermally insulated
Hochwärmegedämmt Highly thermally insulated
Uf-Werte in W/m2K 1,3 1,8 1,7 2,2 – 1,9 2,2 2,2 2,7 Uf values in W/m2K
Ansichtsbreiten für Uf-Werte in mm 117 89 117 117 – 89 89 82 82 Face widths for Uf values in mm
Bewertetes Schalldämmmaß Rw in dB 48 48 48 47 – 45 44 45 44 Airborne sound insulation index Rw in dB
Luftdurchlässigkeit nach EN 12207 4 4 4 4 – 4 4 4 4 Air permeabillity in accordance with EN 12207
Schlagregendichtheit nach EN 12208 9A 9A 9A 9A – 9A 9A 9A 9A Weathertightness in accordance with EN 12208 Widerstand gegen Windlast nach EN 12210 C5/B5 C5/B5 C5/B5 C5/B5 – C5/B5 C5/B5 C2/B3 C2/B3 Resistance to wind load in accordance with EN 12210
Design Design
Bautiefeinmm 75 75 70 65 50 70 65 70 65 Basicdepthinmm
Beschlag Fitting
Schüco AvanTec verdeckt liegend Schüco AvanTec, concealed
Schüco TipTronic verdeckt liegend Schüco TipTronic, concealed
Gestaltungsvarianten Designoptions
ST (Steel Contour) ST (Steel contour)
RL (Residential Line) RL (Residential Line)
SL (Soft Line) SL (Soft Line)
MC (Multi Contour) MC (Multi Contour)
BS (Block System) BS (Block System)
WF (Window Façade) WF (Window Façade)
Einsatzbereiche Areasofuse
Fassadeneinsatzelement Façade insert unit
Fensterfassade Window façade
Schwimmendes Fenster Floating window
Kompatibles Türensystem Schüco ADS Compatible door system Schüco ADS
nachinnenöffnend Inward-openingDreh- (D), Dreh-Kipp- (DK), Kipp (K), Kipp vor Drehflügel (KvD)
Side-hung (SH), turn/tilt (TT), bottom-hung (BH), tilt-before-turn (TbT)
Stulpflügel Double vent
Kurbel-Dreh-Kippflügel Crank-operated turn/tilt vents
Parallel-Abstell-Schiebe-Kippflügel (PASK) Tilt/slide vents
Oberlichtkippflügel Bottom-hung toplight
Flächenbündig als D, DK, K Flush-fitted as SH, TT, BH
nachaußenöffnend Outward-opening
Dreh-, Klappflügel Side-hung, top-hung vent
Dreh-, Klappflügel, flächenbündig Side-hung, top-hung vent, flush-fitted
Schwing- und Wendeflügel Horizontal and vertical pivot vents
Security Security
EinbruchhemmungnachDINVENV1627 BurglarresistanceinaccordancewithDINVENV1627
Schüco AvanTec WK1 Schüco AvanTec WK1
Schüco AvanTec WK2 Schüco AvanTec WK2
Schüco AvanTec WK3 Schüco AvanTec WK3
Schüco TipTronic WK1 Schüco TipTronic WK1
Schüco TipTronic WK2 Schüco TipTronic WK2
Kurbel-Dreh-Kippflügel WK1 bis WK3 Crank-operated turn/tilt vents WK1 to WK3
Öffnungs-undVerschlussüberwachung,Anzeige Monitoringofopeningandclosing,display
Automation Automation
Schüco TipTronic Dreh-Kippbeschlag Schüco TipTronic turn/tilt fitting
Schüco TipTronic Oberlicht Schüco TipTronic toplight
Schüco TipTronic Lüftungsklappe Schüco TipTronic ventilation flap
Schüco TipTronic Schwing- und Wendeflügel Schüco TipTronic horizontal and vertical pivot vents
Schüco TipTronic nach außen öffnend Schüco TipTronic outward-opening
Schüco AvanTec Funkgriff Schüco AvanTec remote control handle
Gruppensteuerung, Bus-Automatisierung Group control, bus automation
Automatische Nachtauskühlung, autom. Lüften Automatic night-time cooling, automatic ventilation
Fernsteuerung, ControlPanel Remote control, ControlPanel
Schü
coFe
nste
r
Schü
coW
indo
wAW
S 75
.SI
AWS
70.H
I AW
S 65
AW
S 50
.NI
AWS
70 B
S.HI
AW
S 65
BS
AWS
70 W
F.HI
AWS
65 W
F
AWS
75 B
S.HI
Anwendungsbeispiele Examples
10 | Schüco
517
33
4822
21
75 10
517
33
4822
21
76
2232
22
Flügel mit Sprosse Vent with sash bar
28
Aufgeklebte Sprosse Stick-on sash bar
Maßstab1:2Scale1:2
Anwendungsbeispiele Schüco Fenster AWS 75.SI Examples for Schüco Window AWS 75.SI
Anwendungsbeispiele Examples
Schüco | 11
51 7 33
48 2221
7510
51733
4822 21
76
22 32 22
91 91
Schü
coA
WS
75.S
I
28
Aufgeklebte Sprosse Stick-on sash bar
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
12 | Schüco
517
33
4822
21
75 10
767
33
4822
21
5111
6
22
91
75
5151
76
Maßstab1:2Scale1:2
Flügel und Festverglasung Vent and fixed glazing
Anwendungsbeispiele Examples
Schüco | 13
51 7 33
48 2221
7510
76733
4822 21
116
22
91
75
51 76
22 26 2226 22
76
22 26 22 Sc
hüco
AW
S75
.SI
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
1� | Schüco
48 7 48
14777
22 22
33 67 33
85
48 7 33
13277
22 22
33 52 33
85
Maßstab1:2Scale1:2
Stulp/Stulp schmal Double vent/Narrow double vent
Stulp Double vent
Stulp schmal Narrow double vent
Anwendungsbeispiele Examples
Schüco | 15
48 16 48
15677
22 22
33 76 33
85
48 44
1847
22
33 49
85
48
7
22
3349
Schü
coA
WS
75.S
I
Pfosten Mullion
Dehnungsstoß Expansion joint
Pfosten/Dehnungsstoß Mullion/Expansion joint
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
Schüco | 17
156
597
90
2238
6729
75 10
156
597
90
2238
67
75 10
29
Schü
coA
WS
75.S
I
Maßstab1:2Scale1:2
Schwing- und Wendeflügel Horizontal and vertical pivot vents
Schwingflügel Horizontal pivot vent
Wendeflügel Vertical pivot vent
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
1� | Schüco
85
1521050 7 4144
Einsatzblendrahmen für Fassaden Insert outer frame for façades
85
1521050 7 4144
Flügelprofil Schüco TipTronic Schüco TipTronic vent profile
Adapter aus EPDM Zum Ausgleich der Einspann-maße im Pfosten bei gleich bleibenden Dichtungshöhen.
EPDM adapter To compensate for tolerances in the mullion, for identical gasket heights.
* Angaben der Glasstärken/Einspannmaße exemplarisch auf Basis eines Einsatzblendrahmens mit 26 mm Einspannmaß Specification of glass thicknesses/examples based on an insert outer frame with 26 mm tolerance
x
27 28 29 30 31 32 33 34 36 39
Art.-Nr. / Art. No.
224933 224934 244071 224938 244072 224935 244557 224936 224937 244555
14.51
14.52
14.53
14.5
4
14.5
5
14.5
6
14.5
7
14.5
8
14.5
10
14.5
13
*
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
Schüco | 1�
85
147
1269
4441
794
142
22
85
150
1269
6941
794
142
Schü
coA
WS
75.S
I
Stapelfassade Strip window construction
Verglasung von außen External glazing
Verglasung von innen Internal glazing
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
20 | Schüco
29 56 22
7 4159
85
56 2922
7107
41 59
85
Eckpfosten 135° 135° corner mullion
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
Schüco | 21
105
105
75
75
225
7187
139
5980 41
85
2256295
75
Schü
coA
WS
75.S
I
Eckpfosten 90° 90° corner mullion
Festfeld Fixed light
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
22 | Schüco
Maßstab1:2Scale1:2
Fußpunkt barrierefreie Schwelle Sill for easy-access threshold
Fußpunkt Sill
Seitlicher Anschluss Side attachment
Pfosten Mullion
Anwendungsbeispiele Examples
Schüco | 23
Schü
coA
WS
75.S
I
Seitlicher Wandanschluss Side wall attachment
Maßstab1:2Scale1:2
Anwendungsbeispiele Examples
2� | Schüco
Oberer Anschluss mit vorge-setztem Rollladenkasten Top attachment, with façade-mounted roller shutter casing
Brüstungsanschluss Spandrel attachment
Seitlicher Anschluss Side attachment
Maßstab1:4Scale1:4
Kopf- und Brüstungsanschluss Top point and spandrel attachment
Anwendungsbeispiele Examples
Schüco | 25
Schü
coA
WS
75.S
I
Maßstab1:2Scale1:2
Seitlicher Wandanschluss Side wall attachment
Anwendungsbeispiele Examples
2� | Schüco
Maßstab1:4Scale1:4
Oberer Anschluss Top attachment
Brüstungsanschluss Spandrel attachment
Seitlicher Anschluss Side attachment
Kopf- und Brüstungsanschluss Top point and spandrel attachment
Anwendungsbeispiele Examples
Schüco | 27
Schü
coA
WS
75.S
I
Maßstab1:2Scale1:2
Seitlicher Wandanschluss Side wall attachment
Anwendungsbeispiele Examples
2� | Schüco
Oberer Anschluss Top attachment
Brüstungsanschluss Spandrel attachment
Seitlicher Anschluss Side attachment
Maßstab1:4Scale1:4
Kopf- und Brüstungsanschluss Top point and spandrel attachment