Product Catalog - Gunold

1.800.432.3781 www.gunold.com2 1.800.432.3781 www.gunold.com

THRE

AD

Gunold POLYTM Polyester ThreadOur 100% polyester thread is manufactured in Germany and is designed specifically for high-speed, commercial embroidery and monogramming machines. It is very pliable, making it easy with which to work. Though it has a beautiful, silky sheen, it can withstand chlorine bleaching and harsh, industrial laundering. Use our polyester thread once and it will become your mainstay thread.

Gunold Poly 40 wt. (den 120/2) is available in 300 dynamic colors on 1,100 yd. Mini-King cones and 5,500 yd. Regular cones. For smaller, or more delicate designs like monograms and mini-logos, use Gunold Poly 60 wt. thread (den 70/2). Our Poly 60 wt. thread is available in 54 colors on 1,650 yd. Mini-King cones.

ORDER ITEM NO. DESCRIPTION SIZE

961+color no. POLY 40 wt Solid Color Mini-King Cone

960+color no. POLY 40 wt Solid Color Regular Cone

971+color no. POLY 60 wt Solid Color Mini-King Cone

Gunold POLYTM Polyester Thread AssortmentsOur Poly 40 wt. thread assortment is available in 1,100 yd. Mini-King cones. Our Poly 60 wt. thread assortments are available in 1,650 yd. Mini-king cones.


9616-27 POLY 40 wt 27 Solid Color Assmt Mini-King Cone

971SORT POLY 60 wt 27 Solid Color Assmt Mini-King Cone

971SORT1 POLY 60 wt 27 Pastel Color Assmt Mini-King Cone

IMPORTANT: All measurements in this guide are approximate.Many of our products are made in Europe to metric specifications. When converting to English measurements, some numerical rounding may occur. In addition, manufacturers are often inexact in their processes.

Your delivered goods may vary slightly in width or length from what is shown in this guide.

THRE

AD

31.800.432.3781 www.gunold.com

Gunold POLYTM Polyester Thread Assortment RacksAvailable with 292 solid colors and eight neon colors on three, wooden, display racks. Each rack has 120 pegs to hold the 1,100 yd. Mini-King cones. The racks are designed to be used freestanding or hanging.


9611SORT POLY 40 wt Assortment Racks Appx. 24”w x 30”h


9615+color no. Poly Sparkle 30 wt. Solid Color Mini-King Cones

9615SORT Poly Sparkle 30 wt. 54 Solid Color Assmt Regular Cones


9618+color no. Poly Flash 40 wt. Solid Color Mini-King Cones

9618SORT Poly Flash 40 wt. 54 Solid Color Assmt Mini-King Cones

PolyFIRE® Fire-Retardant ThreadPolyFIRE fire-retardant thread is ideal for embroidery on firefighters’ uniforms, lab coats, chef’s blouses and any other textile exposed to open flame. This 100% polyester thread has a special coating which prevents the thread from easily catching fire and is tested EN ISO - Oeko-Tex Certificate.

We carry 27 colors of PolyFIRE available in 40 wt. thread (den 115/2) on 1,100 yd. Mini-King cones and nine colors on 5,500 yd. Regular cones. Our PolyFIRE 40 wt. thread assortment is available in 1,100 yd. Mini-King cones.


9617+color no. PolyFIRE 40 wt. Solid Color Mini-King Cones

9607+color no. PolyFIRE 40 wt. Solid Color Regular Cones

9617SORT1 PolyFIRE 40 wt. 27 Solid Color Assmt Mini-King Cones

Gunold POLY SPARKLETM (STARTM) Polyester ThreadFunction meets glamour - POLY SPARKLE (STAR) is hard-wearing and sparkling, because the polyester thread is twisted with a strand of glitter thread. The polyester component makes the thread hard-wearing and soft, the glitter thread lets POLY SPARKLE (STAR) sparkle and glitter. All in all, the result is a wonderful effect thread with a whole new look. Available in several exciting color combinations.

Our POLY SPARKLE (STAR) thread is available in 54 colors in 1,100 yd. Mini-King cones. Our POLY SPARKLE (STAR) 30 wt. thread assortment is available in 1,100 yd. Mini-King cones.

POLY FLASHTM ThreadPOLY FLASH puts a new twist and look to textile surface design offering a layered and textured look effect while adding a subtle sheen. The good news is that it sews out like polyester thread! The result of innovative manufacturing by combining the properties and look of polyester, viscose, and metal in a single thread.

Our POLY FLASH thread is available in 23 colors in 1,100 yd. Mini-King cones. Our POLY FLASH 40 wt. thread assortment is available in 1,100 yd. Mini-King cones.


THRE

AD

Gunold SULKY® Rayon Thread Assortment RacksAvailable with 335 solid colors on three, wooden, display racks. Each rack has 120 pegs to hold the 1,100 yd. Mini-King cones. The separate rack of shaded and multicolor thread has 60 pegs holding 36 shaded and 19 multicolor, 1,100 yd. Mini-King cones. Each rack is designed to be used freestanding or hanging.


9461SORT SULKY 40 wt Solid Color Assmt. Racks Appx. 24”w x 30”h

9461SORT3 SULKY 40 wt Shaded & Multi. Assmt. Racks Appx. 24”w x 30”h

SULKY® Rayon ThreadA European, 100% ENKA®, rayon thread with a shiny, silky luster. Its high tensile strength makes it especially suitable for all high-speed embroidery machines. This is a strong, beautiful thread with a luster like no other. It is also available in shaded and multicolors.

SULKY 40 wt. thread (den 120/2) is available in 390 lustrous colors on 1,100 yd. Mini-King cones and 5,500 yd. Regular cones.


9461+color no. SULKY 40 wt Solid Color Mini-King Cone

9461+color no. SULKY 40 wt Multicolor Mini-King Cone

9450 +color no. SULKY 40 wt Solid Color Regular Cone

9450 +color no. SULKY 40 wt Multicolor Regular Cone

Gunold SULKY® Rayon Thread AssortmentOur Sulky 40 wt. thread assortment is available in 1,100 yd. Mini-King cones.


9410-27 SULKY 40 wt 27 Solid Color Assortment Mini-King Cone


8650+color no. FILAINE 12 wt Solid Color Regular Cone

865SORT1 FILAINE 12 wt 27 Solid Color Assmt Mini-King Cone

FILAINETM Acrylic ThreadFILAINE has wool-like characteristics but is a 100% acrylic thread. FILAINE creates the classic effect of handmade embroidery.

Available in 12 wt. thread (den 260/2) in 129 colors, on 1,100 yd. Regular cones. Our FILAINE 12 wt. thread assortment is available in 275 yd. Mini-King cones.

COTTY® Cotton ThreadGunold’s cotton thread is made of 100% high-quality, long staple, Egyptian cotton used for embroidery and scalloping.

COTTY is available in 30 wt. 3,300 yd. snap bottom cones. Our COTTY 30 wt. thread assortment is available in 550 yd. Mini-King cones.


73010+color no. COTTY 30 wt Solid Color Regular Cone

7311SORT1 COTTY 30 wt 27 Solid Color Assmt Mini-King Cone

THRE

AD


REFLEX CRY® Reflective ThreadFinally, a truly reflective thread! Retro-reflection is the magic word. Retro-reflection occurs when a reflective material returns the impinging radiation to the direction of the radiation source, largely independent of the direction of the reflector. This is particularly the case in the dark, thus serving security and protection to people. Thousands of microscopic glass beads encase the reflective thread Reflex CRY that consists of a polyamide core and a polymer coating ensuring the adhesion of the reflecting glass beads on the thread. Reflex CRY is available in 550 yd. Mini-King cones.


200 Reflex CRY 30 wt. Mini-King Cone

Gunold GLITTER Thread

For sheer razzle-dazzle, you can’t beat the shimmering effect of Gunold’s sparkling GLITTER thread. This is a thin, flat, ribbon-like polyester film which is metalized with an aluminum, holographic layer to give it brilliant reflectiveness. GLITTER is available in gold, silver, red, blue, green and multicolor. Available in 6,500 yd. Bobbin cones.


1480+color no. GLITTER Solid Color Cone

Gunold METY TM Metallic ThreadNeed to add a little sizzle to your next project? Gunold’s METY metallic thread consists of a polyester core wrapped with a metallic foil. Embroidering with this unique thread produces eye-catching results.

METY is available in sizes 7/2 (corresponding to 40 wt. POLY) and 5/2 (corresponding to 30 wt. POLY). We stock a wide range of solid colors, multicolors, silvers and golds in 1,100 yd. Mini-King cones, as well as 5,500 yd. Regular cones in silver and gold.


1410+color no. METY 30 wt. Silver Mini-King Cone

1410+color no. METY 30 wt. Gold Mini-King Cone

1410+color no. METY 30 wt. Solid Color Mini-King Cone

1410+color no. METY 30 wt. Multicolor Mini-King Cone

1440+color no. METY 30 wt. Silver Regular Cone

1440+color no. METY 30 wt. Gold Regular Cone

1510+color no. METY 40 wt. Silver Mini-King Cone

1510+color no. METY 40 wt. Gold Mini-King Cone

1540+color no. METY 40 wt. Silver Regular Cone

1540+color no. METY 40 wt. Gold Regular Cone


THRE

AD

Notice: The customer / manufacturer should assure himself, by preliminary testing and evaluation, that the dye fastness of the thread is suitable for his / her intended uses. Gunold USA threads are intended for use as embroidery threads only, and should not be bleached, except for polyester. They are manufactured and quality controlled to the very highest standards possible. However, since we have no control over the customer/manufacturer’s washing, dry cleaning or pressing of goods onto which our thread is sewn, nor over the weather conditions to which such goods are subjected, (when used on an article or item that will remain exposed to the elements), and since the value of the thread is so disproportional to the value of the material onto which it is sewn, we are not responsible for any consequential damage that could occur to goods onto which our threads are sewn.

INVISIBLE Monofilament ThreadThis is a very thin, tear resistant, monofilament, 80 wt. thread made of 100% polyester. Its unique characteristics make it perfect for unusual designs where a “clear” effect is needed. INVISIBLE has a practical side too; use it for invisible seams and when embellishing fabrics with sequins, cords or pearls.

Available in clear and smoke on 550 yd. Regular cones.


230 INVISIBLE Clear Regular Cone

231 INVISIBLE Smoke Regular Cone

GLOWYTM Luminous ThreadGunold offers glow-in-the-dark embroidery thread. You’ll find GLOWY luminous embroidery thread has the same high quality as all of our products. It is designed specifically for multi-head embroidery machines. GLOWY comes in seven different thread colors. It has a practical, durable application and can be used as a fun and decorative touch for a wide range of applications, such as Halloween costumes and stage costuming.

GLOWY is available in 1,100 yd. Mini-King cones.


472.01 GLOWY 40 wt Yellow Mini-King Cones

472.02 GLOWY 40 wt Orange Mini-King Cones

472.03 GLOWY 40 wt Pink Mini-King Cones

472.04 GLOWY 40 wt Blue Mini-King Cones

472.06 GLOWY 40 wt Purple Mini-King Cones

472.07 GLOWY 40 wt Green Mini-King Cones

472.08 GLOWY 40 wt White Mini-King Cones

BOBB

INS


OLETM Embroidery BobbinsOur low-priced OLE bobbins are made for Gunold by a leading bobbin manufacturer. Each bobbin is wound with 132 yds. of continuous-filament, 100% polyester thread.


892L0100-B White “L” Bobbins Gross (144 bobbins)

Gunold’s Signature Sideless Embroidery Bobbins with CoreGunold’s sideless bobbins are pre-wound with 155 yds. of 100% polyester filament thread. They have been designed to work with most brands of embroidery machines. This is our benchmark bobbin.


895L0100-C White “L” Bobbins Gross (144 bobbins)

Coats V15 Embroidery BobbinsThe best known brand of bobbin in the industry, we stock Coats bobbins in both “L” (132 yds.) and “M” (235 yds.) styles. Both styles are pre-wound with 100% continuous filament polyester thread. They are available in white or black.


892L0100 White “L” Bobbins Gross (144 bobbins)

892L0300 Black “L” Bobbins Gross (144 bobbins)

892M0100 White “M” Bobbins Gross (144 bobbins)

892M0300 Black “M” Bobbins Gross (144 bobbins)

Gunold’s Signature (EncoreTM) Embroidery BobbinsGunold’s signature, low-priced bobbins are especially made for our customers who want a quality bobbin at a bargain price. Each bobbin is wound with 134 yds. of continuous-filament, 100% polyester thread.


896L0100-B White “L” Bobbins Gross (144 bobbins)

896L0300-B Black “L” Bobbins Gross (144 bobbins)



Gunold’s Signature Magnetic Embroidery BobbinsGunold’s Signature Magnetic embroidery bobbin consists of 100% polyester continuous filament thread with a magnetic core. With the magnetic core it creates consistent thread delivery during the embroidery process, with consistent tension throughout the entire bobbin. This bobbin is a “L” style, white, with 148 yds. per bobbin.


BOBB

INS

Fil-Tec Fire Retardant NomexTM Embroidery BobbinsFire-Retardant (FR) L-style bobbin. Bobbin thread is wound on Fil-Tec’s patented magnetic core which provides flawless tension throughout each and every bobbin. Available in jar with quantity of 20 bobbins. The thread is constructed from 100% Aramid and made from NomexTM fibers.


897L-FR White “L” Bobbins 20 bobbins

SpunTM Embroidery Bobbins 100This is the embroidery industry’s standard in bobbin thread. SpunTM Bobbin 100 thread is 100% spun polyester which is very strong and offers excellent tension control. Available in “L” (114 yds.) and “M” (207 yds.).




881M0100 White “M” Bobbins Gross (144 bobbins)

Fil-Tec Magna-Glide P15 Embroidery BobbinsFil-Tec Magna-Glide bobbins are known as the “high-yield bobbin without tension variation.” High-tenacity, polyester filament thread is wound on a magnetic core to give you consistent thread delivery throughout the entire bobbin. Gunold stocks Fil-Tec Bobbins in style “L” (135 yds.) pre-wound with black or white thread or style “M” (230 yds.) pre-wound with white or black thread. Sold in boxes of 100.


897L0100 White “L” Bobbins Box (100 bobbins)

897L0300 Black “L” Bobbins Box (100 bobbins)

897M0100 White “M” Bobbins Box (100 bobbins)

897M0300 Black “M” Bobbins Box (100 bobbins)




Bobby CotTM Embroidery BobbinsIf your embroidery calls for a 100% cotton bobbin thread, Bobby Cot

is the choice of pros. Bobby CotTM is

intended for delicate script, “dainty” embroidery and for use on fabrics and garments which will be dyed. It offers good tensile strength and is recommended when loose tension is required. We offer Bobby CotTM in “L” (92 yds.) and “M” (140 yds.) pre-wound bobbins with sides.

Bobbin Cases - HAYA BrandORDER ITEM NO. DESCRIPTION SIZE

899 “L” without spring Each

899-NBL “L” with spring Each

899-M “M” with spring Each

Bobby SynTM 100 Embroidery BobbinsThough this spun polyester thread is thinner than SpunTM Bobbin 100, it is just as strong. We stock it in white and black, 11,000 yd. cones.


88000100 White Bobbin Thread Cone (11,000 yds.)

88000300 Black Bobbin Thread Cone (11,000 yds.)

BACK

ING


Gunold USA proudly offers a full line of backings for every embroidery need. All of our backings are available as standard rolls or die-cuts, in a variety of sizes. If you need backing in a custom size, let us know. We’ll be happy to provide a quote for custom cut rolls and die-cuts to meet your specifications.

Whether it’s cap backing, black backing, custom sizing, packaging, perforating, slitting or re-rolls - Gunold has you covered!

2065 Pop AwayThis is 1.75 oz., light-weight backing for simple applications. It easily tears in both directions with very clean edges.


663W2065/33 White Roll 100 yds. x 33”w

667W20652225 White Roll 25 yds. x 22”w

666W20658 White Die Cut 8” x 8” (500 pieces)

2015 Quick TearTM

This is 1.5 oz., medium-weight backing with good stability. Easliy tears in both directions.




660S2015 Black Roll 250 yds. x 46”w






666S201515 Black Die Cut 15” x 15” (500 pieces)

666W20158T White Die Cut 8” x 8” (500 pieces)

666S20158T Black Die Cut 8” x 8” (500 pieces)







BACK

ING

2025 Quick TearTM - Great for Caps!This is 2.5 oz., heavy-weight backing.








9802 Quick TearTM - Great for Caps!This is 3.6 oz., heavy-weight backing.


667W9802 White Roll 125 yds. x 3.85”w



666W98024.512 White Die Cut 4” x 12” (500 pieces)



2018 Quick TearTM

This is 1.8 oz., heavy-weight backing with great stability. Easliy tears in both directions.








666W20188 White Die Cut 7.5” x 8” (500 pieces)


666W20186.5 White Die Cut 6.5” x 6.5” (500 pieces)

BACK

ING

111.800.432.3781 www.gunold.com

7015 Gunold Tear Away/ Wash AwayThis is a soft, light-weight, multipurpose, embroidery backing with wash-away characteristics. It is 1.5 oz. in weight.


660W7015 Roll 200 yd. x 57”w

663W7015 Roll 100 yd. x 28”w

666W70158 Die Cuts 8” x 8” (500 pieces)



7018 Gunold Soft Tear AwayThis is a soft, medium-weight, multipurpose, tear-away embroidery backing. It is 1.8 oz. in weight. This is NOT a wash-away.


660W7018 Roll 200 yd. x 57”w

663W7018 Roll 100 yd. x 28”w





660W7020 Roll 200 yd. x 57”w

663W7020 Roll 100 yd. x 28”w




7020 Gunold Tear Away/Wash AwayThis is a soft, medium to heavy-weight, multipurpose, embroidery backing with wash-away characteristics. It is 2.0 oz. in weight.

1640 Stiffy® Black1640 Stiffy® is a 1 oz. tear-away backing for light-weight fabrics.





BACK

ING

1995 Stiffy®

1995 Stiffy® is a 2.8 oz., heavy, tear-away, multipurpose backing for use on most fabrics.





Stiffy® Fusible (Iron-On Backing)A tear-away, iron-on fusible backing useful on most fabrics.


680W1640B 1.0 oz. White Roll 220 yds. x 41”w




666W1860B8 1.7 oz. White Die Cuts 8” x 8” (500 pieces)

1650 Stiffy®

1650 Stiffy® is a 1.5 oz., multipurpose tear-away backing for most fabrics.











1751 Stiffy®

1751 Stiffy® is a 1.1 oz. tear-away backing for light fabrics, wools and knits.


660W1751 1.0 oz. White Roll 220 yds. x 41”w

Filmoplast®

This self-adhesive, non-woven backing can be used in hoops, continuous border frames or for embroidering hats on standard machines. You do not need to use clamping devices or spray adhesives with Filmoplast®. Just peel off the protective paper and manually press the garment to the adhesive side of the Filmoplast®. It will not leave marks on delicate fabrics and is used for light weight materials.


650-020 1.6 oz. White Roll 27 yds. x 8”w


BACK

ING

131.800.432.3781 www.gunold.com

ActionBackActionBack is an exciting new cut-away product. It is the first, effective, woven, fabric backing used for stabilizing stretchy, slippery garments like today’s popular performance wear. Stable in both directions, ActionBack will prevent drifting outlines, puckering and pooching. Available in white and black.


667W88820X50 White Roll 50 yds. x 20”

667S88820X50 Black Roll 50 yds. x 20”

666W888108T White Die Cut 8”x 8” (500 pieces)

666S888108T Black Die Cut 8”x 8” (500 pieces)

666W888108T-250 White Die Cut 8”x 8” (250 pieces)

666S888108T-250 Black Die Cut 8”x 8” (250 pieces)

666W888107-250 White Die Cut 7” x 7” (250 pieces)

666S888107-250 Black Die Cut 7” x 7” (250 pieces)




650S-025 1.6 oz. Black Roll 27 yds. x 10”w






650-100 1.6 oz. White Roll 27 yds. x 39” w

650S-100 1.6 oz. Black Roll 27 yds. x 39” w

650140/6 1.6 oz. White Die Cuts 6” x 6” (100 pieces)

650140/8 1.6 oz. White Die Cuts 8” x 8” (100 pieces)

650S140/8 1.6 oz. Black Die Cuts 8” x 8” (100 pieces)

Pro SportsPro Sports is a 2 oz., cut-away, backing designed to reduce puckering when embroidering stretchy microfiber performance shirts. Available in white and black.


666WPS2006 White Die Cut 6” x 6” (500 pieces)

666BPS2006 Black Die Cut 6” x 6” (500 pieces)

666WPS2008 White Die Cut 8” x 8” (500 pieces)

666BPS2008 Black Die Cut 8” x 8” (500 pieces)

Filmoplast® (continued)


BACK

ING

2075 Totally StableTM

This is 2.0 oz.,light-weight, cut-away backing with stability for most applications. Available in black and white.






667W2075758 White Roll 100 yds. x 7.5”w x 8”perf (450 pieces)





2040 Soft n’ SheerTM Plus FusibleThis is 1.8 oz., nylon, cut-away backing. With a fusible, iron on coating, it is heavier than regular Soft n’ Sheer.


667W20402025C0A White Roll 25 yds. x 20”w

2040 Soft n’ SheerTM PlusThis is 1.5 oz., nylon, cut-away backing. It is multipurpose, spun bonded and great for knitwear. Available in black and white.






667W20408 White Roll 100 yds. x 8”w x 8”perf (450 pieces)










BACK

ING

151.800.432.3781 www.gunold.com


This is 3.0 oz., heavy-weight, cut-away backing which feels soft but has excellent stability. Available in black and white.













This is 2.5 oz., medium-weight, soft, cut-away backing with stability for hard-to-do jobs. Available in black and white.



660S2085 Charcoal Roll 200 yds. x 46”w








666S208515 Charcoal Die Cut 15” x 15” (500 pieces)

666W20858585 White Die Cut 8.5” x 8.5” (500 pieces)


666S20858T Charcoal Die Cut 8” x 8” (500 pieces)

666W20858 White Die Cut 8” x 7.5” (500 pieces)

666W20857575 White Die Cut 7.5” x 7.5” (500 pieces)




666S20856.5 Charcoal Die Cut 6.5” x 6.5” (500 pieces)




BACK

ING

AllstitchTM

A 100% polyester, cut-away backing made in the USA. It has a grid core to give it strength and a soft non-woven fabric surface to help reduce skin irritation. It is thicker and stronger than other backings making one piece suitable for designs with high stitch counts on unstable fabrics. Available in black and white.


ALLSTITCH60 2.5 oz. White Roll 200 yds. x 60”w

ALLSTITCH30 2.5 oz. White Roll 100 yds. x 30”w

ALLSTITCH30B 2.5 oz. Black Roll 100 yds. x 30”w

ALLSTITCH30HD 3.5 oz. White Roll 100 yds. x 30”w

ALLSTITCH8 2.5 oz. White Die Cuts 8” x 8” (500 pieces)

ALLSTITCH8B 2.5 oz. Black Die Cuts 8” x 8” (500 pieces)

ALLSTITCH8HD 3.5 oz. White Die Cuts 8” x 8” (500 pieces)

Screen Print / Proofing Sheet BlanksNon-woven sheets for doing test designs. Comes in 100 piece packs.


666W1608214.515 1.9 oz. White Die Cuts 14.5” x 15”

666W1608214.518 1.9 oz. White Die Cuts 14.5” x 18”

666W160821822 1.9 oz. White Die Cuts 18” x 22”

666S1609214.515 2.0 oz. Black Die Cuts 14.5” x 15”

666S1609214.518 2.0 oz. Black Die Cuts 14.5” x 18”


667W6315FR White Roll 25 yds. x 12”w

6315 Fire RetardantA 1.6 oz. polyester, medium weight, cut-away backing. Great for industries concerned with fire safety issues.

2095 Totally StableTM (continued)ORDER ITEM NO. DESCRIPTION SIZE


666W20958T/250 White Die Cut 8” x 8” (250 pieces)


666W20958 White Die Cut 7.5” x 8” (500 pieces)




666S20956.5 Black Die Cut 6.5” x 6.5” (500 pieces)



SOLV

Y

171.800.432.3781 www.gunold.com

Perforated SOLVY®

This is a roll of 20mil, Gunold SOLVY® which has been perforated for convenient and economical use.

SOLVY® is a Gunold trademarked product. This consistent, water-soluble quality film is used for detalied embroidery on high-pile fabrics like terry cloth bathrobes, towels and knitwear. Solvy® is also popular as a dissolvable, water-soluble backing.

Gunold SOLVY® - The Original!A 20mil, water-soluble plastic film used especially for embroidering on knitwear, terrycloth or any high-plie fabric. SOLVY® is used on top of the fabric which allows much more detail to be seen on any intricate design by preventing the stitches from getting lost in the nap. A light misting of water dissolves SOLVY®.

Water Soluble MaterialsHE

LP

FUL INFORMATION • HELPFUL INFORMATION

• HELPFUL INFORMATION ABOUT GUNOLD SOLVY® SOLVY® is an amazing, water soluble plastic film. It is used to prevent the stitches from getting lost in the nap of knitwear garments. It also prevents the loops from jumping up on terrycloth during the embroidery process. SOLVY® allows much more detail to be seen on any intricate design. It is not to be used on velvet, corduroy or silk.

Using SOLVY® is easy. Just follow these steps:a. Place SOLVY® on top of fabric or hoop it in with the fabric,b. After the embroidery process is complete, tear-away the larger areas of SOLVY® inside

and outside of the design,c. Dissolve SOLVY® on very small areas by lightly misting with water. The residue will

disappear and be removed from the fabric at first washing. (Note that embroidery should not be left damp or wet longer than a few minutes.)

d. On larger areas, mist lightly to dissolve SOLVY®. After a few seconds the dissolved SOLVY® residue may be removed with a damp sponge or cloth.

NOTE: ALL SOLVY® should be kept in a closed plastic bag.

ORDER ITEM NO. DESCRIPTION SIZE*

400.3 Clear Roll 550 yds. x 40”w

400 Clear Roll 110 yds. x 40”w



400.29 Clear Roll 110 yds. x 4” w

400.4 Clear Die Cuts 7” x 7” (500 pieces)

ORDER ITEM NO. DESCRIPTION SIZE*

400.18 Clear Roll 110 yds. x 15”w x 15”perf (264 pieces)







*More sizes are available on our webiste: www.gunold.com


SOLV

Y

Fabri-SOLVYTM

Fabri-SOLVYTM is a 1.25 oz., opaque, fabric-like, water soluble stabilizer which has a soft, silky feel. It behaves like fabric during embroidery, allowing ease of stitching and is easily removed like a water soluble stabilizer. It can be used as a topper or backing. Fabri-SOLVYTM rinses away cleanly, leaving your design soft and comfortable against the skin. Perfect for those with sensitive skin and babies.


401/60 White Roll 131 yds. x 60”w

401.1 White Roll 131 yds. x 30”w

401.7 White Roll 131 yds. x 17.5”w

401.9 White Roll 131 yds. x 11.5”w

401.2 White Die Cuts 8” x 8” (500 pieces)

401.8 White Die Cuts 8” x 8” (100 pieces)

Ultra SOLVYTM

Our 80mil SOLVY is extremely stable and has a non-embossed texture. As a bonus, it sticks to fabrics when moistened. It is four times as firm, thick, heavy, and strong as our original SOLVY. It is often used to support freestanding embroidery designs and a stabilizer when making custom patches.


405/80 Clear Roll 110 yds. x 40”w

405/80.1 Clear Roll 110 yds. x 10”w

40425 Clear Roll 16 yds. x 20”w

Super SOLVYTM

This has the same characteristics as SOLVY®, but is twice as thick (40mil).


405/220 Clear Roll 220 yds. x 40”w

405/110.1 Clear Roll 110 yds. x 10”w

SPEC

IALT

Y BA

CKIN

GS

191.800.432.3781 www.gunold.com

HELP


•


480.1 Single Roll 110 yds. x 10”w

480 Single Roll 110 yds. x 30”w

ThermogazeTM (Heat AwayTM)Similar to SOLVY® except it is used on fabrics that cannot get wet like corduroy or velvet. It is placed on top of the fabric which allows significantly more detail to be seen when intricate designs are sewn. It is removed with an iron or heat press. Heat AwayTM is also used to create free-standing embroideries and can be used as a backing.

HELPFUL INFORMATION ABOUT HEAT AWAYTM Heat AwayTM is a special heat-sensitive, woven cotton fabric often referred to as “burn-away” or “aetz-cloth.” It is used in the following situations:

a. On top of fabrics that cannot get wet, like corduroy or velvet, to keep stitches from sinking in and getting lost.

b. To create “free-standing” embroidery. Just hoop Heat AwayTM and embroider directly onto it. After removing the Heat AwayTM, only the embroidered pattern remains.

After the embroidery process is complete, adjust your flat-iron or your thermo-press to the temperature for lining (248°F - 356°F). Press the garment for 15 seconds. During this process, the Heat AwayTM disintegrates. The remaining fibers, in the embroidered pattern, must be brushed out. A soft-bristle brush works best.

Heat AwayTM must be protected against moisture, heat and sun. Keep Heat AwayTM in sealed bag or container - it should be stored in a closed plastic bag. Embroidered patterns from which Heat Away is not removed immediately should also be stored in a closed plastic bag. Heat Away does not become useless if stored incorrectly, but it will be more difficult to remove.

HELP


• HELPFUL INFORMATION ABOUT COVER THE BACKTM Cover the BackTM prevents a coarse embroidery design from touching sensetive skin. Great for baby apparel, polo shirts, lingerie, sports apparel, or any embroidery that may be irritating to the skin.

For best results, cut Cover the BackTM one half inch larger than your design. Place coarse fusible side down, over the back of the design. Using a heat press at 250° - 270° degrees with pressure set at 3-4 bars, press for 10 to 14 seconds. A household iron may be used, using the highest heat setting the garment will allow. Keep Cover the BackTM in sealed bag or container - it should be stored in a closed plastic bag.


200-60-200 White Roll 200 yds. x 60”w

200-60-200-B Black Roll 200 yds. x 60”w

200-30-25 White Roll 25 yds. x 30”w

200-20-25 White Roll 25 yds. x 20”w

200-20-25-B Black Roll 25 yds. x 20”w

Cover the BackTM

This is a polyester, circular knit mesh with a polyamide adhesive coating. Its main use is to cover the back of your embroidery design preventing snags and protecting sensitive skin and children’s wear.


SPEC

IALT

Y BA

CKIN

GSHE

LP


• HELPFUL INFORMATION ABOUT THERMOfilmTM Beautiful embroideries without stabilizing? That’s impossible - THERMOfilm, however, is a stabilizer that disappears after embroidering. Embellishments on lady’s outerwear, children’s wear and fine baby wear should have an extremely smooth finish. And if both sides of finished patterns are visible, stabilizer residues should not be seen. THERMOfilm is a heat-removeable film that can easily be torn away after embroidery. Small residues can completely be removed with an iron. You’ll have flawless embroideries that look great on both sides. Ideal for smooth fabrics!

IMPORTANT! Keep THERMOfilm in a dry place and away from direct sunlight.

ThermofilmTM

This is a heat-sensitive film which can be completly removed after embroidering. It is an alternative to using regular backing when you do not want residue on the fabric.


406/030 Clear Roll 330 yds. x 39.5”w

406/030/55 Clear Roll 55 yds. x 39.5”w

HELP


• HELPFUL INFORMATION ABOUT ThermofixTM

Cut it out. Iron it on. That’s all there is to it. Using Thermofix, it is quick and easy to affix embroidery designs onto jackets, shirts and fabrics. Your design will adhere permanently–even after frequent washings! Thermofix is just like a nonwoven that consists of adhesive fibers. It is ironed onto the finished embroidery design after the embroidery process. Then the emblem is placed onto the desired spot of your fabric and has to be permanently fixed either with a household iron or a heat press. But there is even more to Thermofix than making fast and easy appliqués: It is the perfect solution for very small and tricky areas where fixation by machine is simply impossible. Also great for fusing edges and for seaming!

IMPORTANT: Thermofix must be used in combination with silicone paper.


42225 Clear Roll 27 yds. x 15.7”w

413 Silicone Paper Roll 55 yds. x 15.4”w

ThermofixGreatly speeds up appliqué work and patches - cut it out, iron it on the finished appliqué or patch, then permanently affix it to your desired position with a heat press. Also great for fusing edges and seaming.

SPEC

IALT

Y BA

CKIN

GS

211.800.432.3781 www.gunold.com





ThermosealTM

Waterproof your embroidery! Use Thermoseal to seal the back of your embroidery and moisture will not penetrate the fabric through the tiny needle punctures.

HELP


• HELPFUL INFORMATION ABOUT THERMOSEALTM Think of all the products you can now embroider - rain gear, outdoor jackets - all kinds of functional clothing can be embellished and the wearer will stay dry. Use it on work clothes for construction, first responders, and the military. Even outdoor gear like duffle bags, backpacks, tents, and sports equipment bags can be embroidered with names and logos, and the contents will remain high and dry. Entirely new market segments are now open as wide as your imagination will take them.

IMPORTANT: All garments/products should be heat tested prior to applying this material.

HELP


• HELPFUL INFORMATION ABOUT Gudy Stick Appliqué work is child’s play when using Gudy Stick: this special film, adhesive on both sides, allows positioning of appliqué to base fabric without ironing. It lets you produce neat embroideries without farying edges, simply by coating your fabric with Gudy Stick before cutting out or lasering. Just stick on the appliqué, satin-stitch around it, and it’s ready - it saves time and prevents rejects. Gudy Stick is excellent value for money!

Gudy StickA double-sided adhesive film bonds to your fabric without the need for heat-setting. Just peel, sitck to your appliqué, place on your fabric, and satin stitch around the edges to finish it off. Simplifies and speeds up the apppliqué process.


652120/122 White Roll 27 yds. x 48”w

652120-40 White Roll 27 yds. x 16”w





SPEC

IALT

Y BA

CKIN

GSHE

LP


• HELPFUL INFORMATION ABOUT HEAT N’ SEAL *TYPE H: This type has been designed for use with a household iron. It will withstand dry

cleaning and a warm water wash cycle (up to 100°F) after it has been allowed to dry for 48 hours.

**TYPE J(I): This type has been designed to be applied with a fusing press. It will withstand dry cleaning and boiling water after it has dried for 48 hours.

STEP 1: Tack Heat N’ Seal to the back of the embroidery. It is important that neither the temperature nor the pressure be too high in this first step.

a. TYPE H: Put the iron setting on wool or about 275°F. Keep the iron moving for 10-15 seconds. If using fusing press with Type H you only need 4-6 seconds at three pounds per square inch (psi).b. TYPE J(I): Set the fusing press to 320°F at 3-4psi for 4-5 seconds.

You are now ready to trim the embroidery and remove the silicone paper.

STEP 2: Fuse embroidery to the garment.

a. TYPE H: When possible, the heat of the iron should come through the garment during Step 2. This means that the embroidery should be face down with the garment over it when the heat of the iron is being applied. This will draw the adhesive from the embroidery to the garment. The temperature setting for the iron should be on high or linen during this application. We suggest you press vigorously for 20-30 seconds.

b. TYPE J(I): The fusing press temperature needs to be set higher; about 330°F. The pressure should be set between 5-20 psi for about 10-15 seconds.

Please allow Heat N’ Seal to dry at least 48 hours for the most effective use. All of the above are averages to serve as guidelines. Adjustments may need to be made to reflect thickness and heat flow through the fabrics used. Thicker fabrics require higher pressure. Time and pressures can be varied. Higher temperatures allow shorter fusing time.

Heat N’ Seal (BSNTM)Heat N’ Seal is a sealing film which permanently heat seals patches and emblems onto all commonly used fabrics. It is a polyamid hot-melt adhesive, supplied as a film on silicone release paper. Order Type H for use with a household iron. Type J(I) is to be used with a fusing press.


415-075 Type J(I)** Roll 110 yds. x 30”w

415-037 Type J(I)** Roll 110 yds. x 15”w

415.2 Type J(I)** Roll 22 yds. x 20”w

415.10 Type J(I)** Roll 10 yds. x 22”w

41025 Type H* Roll 27 yds. x 15”w

NEED

LES

231.800.432.3781 www.gunold.com

Organ Needles - Flat ShankOrgan has been manufacturing sewing needles since 1939. These high-quality needles are perfect for those machines which require a flat shank needle. We carry them in a variety of sizes from 65/9 to 90/14.


15 X 1 65/9 65/9 Flat Shank Pkg of 10 needles





130/705 H SES 75/11 Flat Shank Box of 100 needles

Organ Needles - Brother and Baby Lock Machines OnlyIf you use your automatic thread feeder you must order from this iist. If you DO NOT use your automatic thread feeder, save money and order from the list above.


EBBR 65/9 65/9 Flat Shank Pkg of 10 needles




HA x 130 EBBR 75/11 Flat Shank Box of 100 needles

Organ Needles - Round ShankThese needles are highly-polished, surgical steel in ballpoint and sharp styles. All Organ needles have extra large eyes for easier threading and larger shafts for decreased deflection. Ballpoint needles are available in six polular sizes and sharp needles are available in three sizes.


57765SES 65/9 Ballpoint Box of 100 needles





57710016 100/16 Ballpoint Box of 100 needles

57970 70/10 Sharp Box of 100 needles




NEED

LES

COTTY® 30 wt. Cotton ThreadThin Material: 75/11 or 80/12Heavy Material: 90/14

FILAINETM 12 Acrylic ThreadThin Material: 90/14, 100/16

Fluor Fluorescent ThreadThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

Glitter Glittery Foil YarnThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

Glowy Glow-in-the-DarkThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

METYTM 7/2 Metallic ThreadThin Material: 75/11Heavy Material: 75/11

METYTM 5/2 Metallic ThreadThin Material: 75/11 or 80/12Heavy Material: 90/14

Mono Monofilament ThreadThin Material: 65/9 or 75/11Heavy Material: 65/9 or 75/11

SULKY® 40 wt. Rayon ThreadThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

SULKY® 30 wt. Rayon ThreadThin Material: 75/11 or 80/12Heavy Material: 90/14

Poly 40 wt. Polyester ThreadThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

Poly 60 wt. Polyester ThreadThin Material: 65/9Heavy Material: 65/9 or 75/11

Poly Fire 40 wt. Polyester ThreadThin Material: 75/11 or 80/12Heavy Material: 75/11 or 80/12

SUGGESTED NEEDLE SIZES

Titanium-Nitrite NeedlesIf you’re looking for a tough, long-lasting needle, this is it. These needles are treated with titanium nitrite and are three times stronger than ordinary needles. Testing has shown these needles have five times the reduced attrition at the tip. Fewer needle breaks means less down time and increased efficiency.


580PD65 65/9 Sharp Box of 100 needles



580PD65SES 65/9 Ballpoint Box of 100 needles




SCIS

SORS

251.800.432.3781 www.gunold.com

Embroidery Scissors and Tools When it comes to the tools you depend on daily, you don’t want to compromise on quality. Gunold has the widest range of embroidery scissors and tools in the industry at competetive prices. Those familiar with the Gingher line of products will tell you, there is no substitute.

Gingher 4” Embroidery Scissors

New Gingher scissors contured for either left or right-handed users.


550 Black plastic 4”

3 1/2” Left Handed Curved ScissorThis scissor is made specifically for left-handed cutters.


572-L Silver Metal 3 1/2”

Fiskars 4” Premier ScissorsProfessional grade thread scissors, straight, compact size.


552 Orange Handle 4”

Fiskars 5” Premier ScissorsA great pair of all-around scissors.


553 Orange Handle 5”


SCIS

SORS

Kai 9” Bent Fabric Scissors

A favorite of professional embroiderers everywhere, these bent-handle scissors are ergonomically designed for all-day comfort.


555 Black Rubber 9”

Kretzer Spirale 5” Blunt Tip ScissorsThese unique scissors are made with German precision. The blunt tips prevent poking holes in your garments. Worth twice the price!


559 Silver Metal 5”

Kai 5” ScissorsThese 5” scissors are VERY sharp. The flexible finger holes make them another shop favorite. Contured for either left or right-handed users.


557 Black Rubber 5”

Curved End Scissors

These scissors have a curved end for cutting jump and joining sticthes, and for small appliqué work.


572 Silver metal 3 1/2” scissor

SCIS

SORS

271.800.432.3781 www.gunold.com

Curved-End ScissorsThese scissors have a curved-end and are for medium sized appliqué.


573 Silver metal 4” scissor

4” Curved-End ScissorsGold trimmed, curved-end scissors for cutting jump and joining stitches, and for small appliqué work.


572-B Gold metal 4” scissor

Curved-End ScissorsGold trimmed, curved-end scissors for cutting jump and joining stitches, and for small appliqué work.


572-A Gold metal 3 1/2” scissor

Straight-End ScissorsSimilar to our curved-end scissors (572), but have a straight end.




SCIS

SORS

Gingher Embroidery Scissors - 4” Double-CurvedThese high-qualtiy scissors have larger finger holes and are double-curved to make cutting in tight places easy.


566-LFH Silver metal 3 1/2” scissor

4” Gingher Curved-End Embroidery ScissorsCurved-end scissors for cutting jump and joining stitches, and for small appliqué work.


599-1 Silver metal 4” scissor

Narrow Straight-Blade ScissorsStraight-end scissors for cutting jump and joining stitches, and for small appliqué work.


576-3 Red Handle 3 1/2” scissor

6” Gingher Appliqué ScissorsDouble-curved handles for easy access to hooped items.


599-2 Silver metal 6” scissor

SCIS

SORS

291.800.432.3781 www.gunold.com

Gingher Gold Stork ScissorsGold trimmed, very fine, straight-end scissors for cutting jump and joining stitches, and for small appliqué work.


599-3 Gold Handle 3 1/2” scissor

Stitch Remover Scissors

This wonderful tool is actualy two tools in one! The blade design makes cutting close to the fabric possible. It also has a small hook on one side to easily pick up jump stitches.


574 Red plastic 4” scissor


567 Gingher Silver metal Scissors Only (no case)

6”

567-D Silver metal Scissors Only (no case) 6”

567-DC Silver metal Scissors with Case 6”

6” Double Curved Embroidery ScissorsProfessional quality, double-curved scissors designed to make cutting in an embroidery hoop more comfortable and with increased precision.



Gingher 8” Featherweight Bent Trimmers

They may be large, but they are light as a feather. Precision ground edges make cutting easy. You can’t go wrong with Gingher quality.

567

567-D567-DC


TOOL

S

TOOLS

Disposable SnipsSold by the dozen.


577C Multi-Color Metal 4” scissor

SnippersStraight ended, snippers.


577A Blue plastic 4 3/4” scissor

Gingher 4” Featherweight Thread ClipThese special thread clips have very sharp points, no finger holes, and weigh only 1/2 ounce. The protective cap has a loop to attach a string or ribbon. These are a favorite among professional embroiderers.



Squeezers

A unique, feather-light curved point squeezer for precision cutting.



Straight-Point Squeezers

This lightweight squeezer has a longer stright edge blade. Our low price Includes a zippered storage case.


852 Silver metal 6”

TOOL

S

311.800.432.3781 www.gunold.com

TOOLS

Long Tweezers

This pair of 8” straight tweezers has serrated teeth for easy gripping. Zippered storage case included.



Cross Tweezers

The reverse action on these tweezers makes them self-closing! They have serrated teeth which are fantastic for gripping and holding thread and other small items.



Bent Nosed TweezersExtremely strong, yet small. Great for reaching tight areas.


576-1 Red Handle 4 1/2”

Tweezers

These deluxe six-inch, curved tweezers are made of forged stainless steel. The surgical precision points have serrated teeth, allowing you to grasp even the finest threads.


TWE6 Silver metal 6”

ScrewdriverSmall slot-end screwdriver sized for embroidery machine screws.


576-2 Red Handle 5”


TOOL

S

TOOLS

Embroidery Tool KitGunold’s embroidery tool kit contains a seam ripper, small flat head screwdriver, bent nosed tweezers, light-weight squeezer, and an extra narrow, pair of straight-blade scissors. Everything is in a handy, zippered storeage case. An amazing value for such a useful set of tools.


576 Tool Kit 6” x 3”

Stitcher’s Hardware KitThe essential screwdriver set made just for machine embroiderers. Includes flat, extended flat and phillips heads, and a straight inset driver with an easy-to-hold, bulb handle. Zippered storage case included.

ORDER ITEM NO. DESCRIPTION

585 Stitcher’s Hardware Kit with Case

Peggy’s Stitch Eraser®

Oops! We all make mistakes. But now, you aren’t facing hours of painstaking scissors work. This time-saving tool allows you to cut and remove stitches quickly and conveniently. Specifically designed for the embroidery industry, there is simply nothing else like Peggy’s Stitch Eraser®. Please specify Eraser model number when ordering.


581 Corded eraser (cord included)

581-B Replacement Blades for Corded model


586 Birds Nest Tool Kit with Case

586-BLADE Birds Nest Tool Kit Replacement Blade

Birds Nest Tool KitNext time your machine decides to create a bird’s nest, be prepared. This smartly designed Bird’s Nest Tool Kit is perfect for clearing that nasty tangle. Use the long-handled Thread Hook to pull the snarl toward you, then sever the threads with the flat, surgical steel blade of the Stitch Releaser. Get one today and get on with your work! Zippered storage case included.

TOOL

S

331.800.432.3781 www.gunold.com

TOOLS

HELP


• HELPFUL INFORMATION ABOUT KK100TM KK100 is a non-toxic, temporary, adhesive spray. It fully absorbs within 24-36 hours. It has many uses, including the following:

a. Used on stretch knits to significantly reduce the fabric movement of sweaters and knit shirts while embroidering. Just spray the backing with KK100TM and hoop together with the fabric.

b. Can be used to hold Puffy FoamTM in place while embroidering.

c. All KK products can also be used with appliqué. Just spray the die cut and place (even reposition if necessary) onto the fabric for embroidery.

d. Used on slippery material to help eliminate puckering. Spray the backing and hoop together with fabric.

e. Holds unfinished garments in place. Spray fabric and stick to hooped backing. Especially great for pockets and patches.

f. Good for screen printers also; provides a tacky surface without stains and leaves no residue.

g. KK100TM eliminates hoop marks. Try it on collars and cuffs. Spray fabric and stick to hooped backing.

Adhesive SprayKK100TM is the original spray adhesive made specifically for the embroidery industry. It is a non-toxic, temporary spray adhesive and is great for holding die-cuts in place for appliqué or to prevent shifting between backings and fabrics. It can be used to hold Puffy FoamTM in place while embroidering. KK100TM is absorbed into the fibers of the fabric within 24-36 hours.


490 KK100 in 18 oz Spray Can

- KK100 in Case of 12, 18oz Cans

495 KK100 Economy in 18 oz Spray Can

- KK100 in Case of 12, 18oz Cans


FABR

ICS

Stitch SaverTM (STEPTM)A textured, 100% polyester fabric which looks like it has been embroidered. STiTch Saver

TM is used as a background material for patches and emblems, saving time and money. Available as a master roll or on a per-yard basis (in select colors).


63801B White With Non-Adhesvie Backing 1 yd. x 30”w

63802B Black With Non-Adhesvie Backing 1 yd. x 30”w

63803B Red With Non-Adhesvie Backing 1 yd. x 30”w

63804B Navy Blue With Non-Adhesvie Backing 1 yd. x 30”w

63806B Yellow With Non-Adhesvie Backing 1 yd. x 30”w

63810B Green With Non-Adhesvie Backing 1 yd. x 30”w

63812B Gold With Non-Adhesvie Backing 1 yd. x 30”w

63817B Royal Blue With Non-Adhesvie Backing 1 yd. x 30”w

63819B Light Blue With Non-Adhesvie Backing 1 yd. x 30”w

63820B Grey With Non-Adhesvie Backing 1 yd. x 30”w

420SORT Assortment Pack of 10 Colors 15.5”h x 11.5”w

canvayTM

Small lettering and intricate details are more distinct on the plain weave of Canvay. Contrary to Twilly, you can print onto Canvay because it consists of 100% polyester. Laser cut appliques guarantee absolutely neat embroidery edges and save the time of manual cutting. Another great advantage is that letters and monograms turn out needle-sharp. An impressive quality for extremely comfortable processing. Available in black and white.


42261002 White 1 yd. x 30”w

42261005 Black 1 yd. x 30”w

FABR

ICS

351.800.432.3781 www.gunold.com

TwillyTM

TwillyTM is a 26% cotton /74% poly based, tackle-twill fabric which has a permanent, non-woven coating making it an ideal basic material for embroidering badges, emblems, labels, patches etc. The fabric is tightly woven

making monograms very clear. It has high stability and flexibility. TwillyTM can be

embroidered on directly with our POLY 40 thread without using any backing or it can

be applied to a garment with BSN type H or J. TwillyTM can be cut with scissors or a laser cutter

and is available in 16 colors.


42361002 White 1 yd. x 30”w

42361005 Black 1 yd. x 30”w

42361017 Cream 1 yd. x 30”w

42361028 Light Blue 1 yd. x 30”w

42361043 Navy Blue 1 yd. x 30”w

42361051 Green 1 yd. x 30”w

42361147 Red 1 yd. x 30”w

42361166 Dark Gray 1 yd. x 30”w

42361169 Maroon 1 yd. x 30”w

42361184 Orange 1 yd. x 30”w

42361212 Army Green 1 yd. x 30”w

42361323 Brown 1 yd. x 30”w

42361369 Yellow 1 yd. x 30”w

42361465 Silver Gray 1 yd. x 30”w

42361517 Dark Green 1 yd. x 30”w

42361535 Royal Blue 1 yd. x 30”w

423SORT Assortment Pack of 16 Colors 15.5”h x 11.5”w


FABR

ICS

FeltyTM

For this special felt, barbed needles are used to mechanically tangle fibers into a premium felt fabric. Felty is ideal for embroidery projects since it is non-elastic, soft and has a smooth surface - there is nothing to deflect the embroidery needle. High quality appliqués, emblems and patches.


460400 Soft White 1 yd. x 40”w

460401 White 1 yd. x 40”w

460405 Tan 1 yd. x 40”w

460424 Dark Yellow 1 yd. x 40”w

460426 Orange 1 yd. x 40”w

460431 Pink 1 yd. x 40”w

460436 Red 1 yd. x 40”w

460438 Maroon 1 yd. x 40”w

460448 Green 1 yd. x 40”w

460449 Dark Green 1 yd. x 40”w

460450 Light Blue 1 yd. x 40”w

460454 Dark Royal Blue 1 yd. x 40”w

460456 Navy Blue 1 yd. x 40”w

460459 Dark Navy Blue 1 yd. x 40”w

460478 Brown 1 yd. x 40”w

460483 Heather Pink/Gray 1 yd. x 40”w

460485 Heather Blue 1 yd. x 40”w

460493 Gray 1 yd. x 40”w

460494 Heather Green 1 yd. x 40”w

460495 Heather Gray 1 yd. x 40”w

460499 Black 1 yd. x 40”w

460SORT Assortment Pack of 26 Colors 11”h x 13”w

PUFF

Y FO

AM

371.800.432.3781 www.gunold.com

Puffy FoamTM

This popular material adds dimension to your embroidery. Puffy FoamTM is made of ethylene vinyl acetate. It is water resistant, non-toxic and can be machine washed and dry-cleaned. Please note that this product is flammable. Puffy FoamTM comes in thicknesses of 2mm, 3mm, 4mm and 6mm. Colors vary per sheet size. Use Gunold’s KK100TM to help hold Puffy Foam in place. See our website for information. IMPORTANT: Embroidery designs must be digitized for using Puffy Foam.


45000 3mm Sheet Assortmt Pack of 14 Colors* 6” x 8”

44001 2mm Sheet White 12” x 18”

44002 2mm Sheet Black 12” x 18”

44003 2mm Sheet Tan 12” x 18”

44004 2mm Sheet Red 12” x 18”

44006 2mm Sheet Pink 12” x 18”

44008 2mm Sheet Forest Green 12” x 18”

44012 2mm Sheet Royal Blue 12” x 18”

44013 2mm Sheet Yellow 12” x 18”

44017 2mm Sheet Gray 12” x 18”

44350 2mm Sheet Dark Blue 12” x 18”



45003 3mm Sheet Tan 9” x 12”

45004 3mm Sheet Red 9” x 12”

45008 3mm Sheet Forest Green 9” x 12”



*White, Black, Tan, Red, Yellow, Gray, Dark Blue, Royal Blue, Forest Green, Orange, Pink, Lime, Brown, Purple


PUFF

Y FO

AMORDER ITEM NO. DESCRIPTION SIZE

45331 3mm Sheet Purple 9” x 12”

45332 3mm Sheet Orange 9” x 12”




46003 3mm Sheet Tan 12” x 18”

46004 3mm Sheet Red 12” x 18”

46007 3mm Sheet Lime 12” x 18”

46010 3mm Sheet Brown 12” x 18”




46018 3mm Sheet Pink 12” x 18”






Puffy FoamTM (continued)




56004 3mm Sheet Red 12” x 18”



56332 3mm Sheet Orange 12” x 18”

56343 3mm Sheet Goldenrod 12” x 18”



Hi-Density Puffy FoamTM

Consumers are demanding sharper, crisper, 3D effects on their embroidered products. Our new Hi-Density Puffy Foam gives that sharper edge because it’s approximately 44% denser than regular Puffy Foam. It’s still the same high-quality Puffy Foam you depend on; we will sell no other.

MIS

CELL

ANEO

US

391.800.432.3781 www.gunold.com

Alba-5 Lubricant

This amazing can of lubricant delivers one drop of oil each time you depress the button. A precision metering system prevents drips and runs, putting 100% clear lubricating oil exactly where you want it. No waste and no stains.

Fabric Seal -Anti-Fray Spray

This fine-mist fabric sealer will prevent unraveling, thread slippage and seam failure by sealing the edges and securing thread ends. It won’t stain and it eliminates over-edge stitching.

PSR II Spot Lifter -Powerful Powdered

Spot RemoverRemoving grease, oil stains, rings and circles

is as easy as spray-it-on, let-it-dry, brush-it-off. This product is low odor, non-toxic,

and contains no clorinated solvents (no Prop 65 warnings!). It drys quickly and leaves

no “rings”, so it’s safe to use on silk, satin, cotton, wool, taffeta, acetates and more. Complies with California VOC standards.

Lily White Embroidery Machine Oil

This is a crystal clear, non-detergent mineral oil ideal for all embroidery machines. The

high purity and clear color make it perfect for use when the

lubricant may come in contact with fabrics. Available in a 4 oz.

Zoom Spout and 32 oz. refill.


499-1605 Alba-5 Lubricant 6.84 oz. Can

499-3014 Lilly White Embroidery Machine Oil 4.0 oz. Bottle with Zoom Spout

499-3002 Lilly White Embroidery Machine Oil 32 oz. Refill

499-1074 Fabric Seal 10.5 oz. Can

499-1060 PSR II Powdered Dry Cleaning Fluid 12.5 oz. Can


MIS

CELL

ANEO

US

Hard To Find Items Round out your embroidery tool box with some of Gunold’s accessories. These items represent the best of their kind and we offer them to you with the confidence you’ll find them as useful as we do.

Fray CheckTM

Used for sealing the edges of Stitch SaverTM and other fabrics which have a tendency to fray at the edges.


483. 3/4 oz. Bottle

Slitting Pen

Slitting pens are made exclusively for our Filmoplast® adhesive backing. These pens are used to score the protective paper, making it easy to peel away from the self-adhesive, non-woven backing. This pen may be used in any application where scoring and cutting are needed.


6511 Slitting Pen

Oiler Pen

This 0.40 oz., pocket-sized, needle-point, lubricator pen is great for those hard-to-reach places or tiny machine parts which need to be oiled.


598 Oiler Pen

Alba Wash Hook Cleaner / LubricantAlbaChem Alba-Wash Hook Cleaner / Lubricant is for your embroidery, sewing and all textile machinery. This unique product will assist in the maintenance of the machine by removing oil, grease, dirt and other debris from the rotary hook area. In addition, it prevents corrosion and rust keeping your machine ready for any project. Available in 11 oz. spray can.


499-1615 11 oz. Spray Can

Rotary Hook Cleaner& Lube Maintenance KitWith just three quick steps you will keep your embroidery machines working like new! Kit Includes 1 can each: Alba-Wash, Big Shot Duster Spray, and Alba-5 Lubricant.


450-1699 3 Piece Maintenance Kit

MIS

CELL

ANEO

US

411.800.432.3781 www.gunold.com

Thread StockingsPut this over your metallic and specialty thread cones to prevent thread twisting. Also great for storage on cones without snap bases.


593-50 Cone Stocking - Bundle of 50

593M Mini-King Stocking - Bundle of 50

Wooden Thread Display RackGunold’s solid wood thread racks have 120 pegs to hold our 1,100 yard Mini-King Cones. They will also hold 60 of our 5,500 yard cones. These useful wooden racks can stand upright or be hung on a wall.


995.8 Empty Poly® or Sulky® Wooden Thread Rack (with hardware)

Spot Cleaner

Formula TS-3, made by Tekmar, is a non-flammable spot cleaner. This cleaning fluid will instantly remove 100% of cured plastisol inks, along with water-based puff, flock adhesive and many other ink types.


TS3 One Gallon Jug

ConeplatesHandy for putting under thread cones which have no snap-base bottom.


592 Coneplates

Lint Brush

A two-sided, nylon brush. Incredibly useful for machine maintenance.


LBR1 Lint Brush

Double-Sided Tape

Our double-sided tape is used to hold backing in place when using a hooping frame. Double-sided tape consists of an acrylic adhesive with an extremely high adhesive power and high, instant tack, allowing it to be used multiple times.


DST1 Single Roll 36 yds. x 1”

DST1.5 Single Roll 36 yds. x 1 1/2”


MIS

CELL

ANEO

US

Silicone SprayGuaranteed to make your rayon and metallic threads run smoother by reducing friction. It is non-staining and does not contain chlorofluorocarbons.


496 Silicone Spray in 11 oz. Spray Can

Blow OffTM 152a DusterCrystal clean, compressed air in a can used as an all-purpose sterilized cleaner to remove dust, dirt and microscopic debris from hard-to-reach places. Recommended for embroidery and sewing machines, keyboards, computers, printers, fans and more. Great for threading some types of machines. Ozone safe.


498 Blow Off 152a in 10 oz. Spray Can

Big ShotTM Duster SprayAlbaChem Big Shot™ Duster Spray delivers powerful blasts of compressed air in a large 12oz can. Great for electronics and machinery.


499-1340 Big Shot in 12 oz. Spray Can

Liquid Hand Sanitizer With SprayerThis liquid hand sanitizer can be used for both sanitizing hands and spraying on surfaces that would commonly be touched (Cell phone, door knobs, keyboards, etc.) The 20 oz spray bottle is an 80% Ethyl Alcohol solution.


499-HS77S Hand Sanitizer in 20 oz. Spray Bottle

MIS

CELL

ANEO

US

431.800.432.3781 www.gunold.com

Fabric MarkersThese are high-quality textile touch-up pens which are double-ended, water based, pigment ink, textile markers. These permanent markers are acid-free and will not wash out. One end of the marker has a fine tip for detailing and outlining. The other end has a flexible brush tip for more complete coverage.


40000 Set of 12 Basic Color Pens -Black, Red, Yellow, Blue, Royal Blue,Pink, Purple, Brown, Orange,Lime Green, Kelly Green, Blender

40001 Set of 6 Basic Color Pens - Black, Blue, Green, Yellow, Red, Purple

40001-B Set of 6 Basic Black Pens

Embroiderer’s HelperOur handy tool for finding perfect logo placement on shirt fronts. Works everytime!

Embroiderer’s Big HelperFind perfect logo

placement on large sized shirt fronts. Made

for XL - XXXL shirts.


EMB HELPER Die Cut Plastic

Embroiderer’s ’Lil HelperAn indispensable tool for finding perfect logo placement above shirt pockets.


EMB LIL HELPER Die Cut Plastic


EMB BIG HELPER Die Cut Plastic


SOFT

WAR

E

SnapFonts Collection Font SoftwareORDER ITEM NO. DESCRIPTION SIZE

MASTERFONTS Software CD

MICROFONTS60 Software CD

PUFFYFONTS Software CD

Keyboard Lettering Software

GunoldSnapFontsTMCollection

MicroFontsThe first ever, fully-digitized, commercial, micro-lettering system. Easily create clean, crisp embroidery lettering as small as 3mm! Your creativity will never again be limited by the size of your lettering.

Get twelve popular fonts already digitized and ready to go with this software package.

PuffyFontsNow anyone can stitch Puffy Foam lettering.

This unique software includes 13 popular font styles (Arial now in upper and lower case) along with Wingdings consisting of 38 additional characters specifically digitized for embroidery using Puffy Foam® and 40 wt. thread. It’s versatile and easy to use.

MasterFontsInstantly increase your shop’s productivity and profits with 240+ of the most popular fonts. Also includes several monograms. MasterFonts was created by a professional digitizor who had a vision to make it easy for non-digitizers to navigate and embroider like a professional. Many of these fonts are not included in your embroidery digitizing software or with the software that came with your machine.

SOFT

WAR

E

451.800.432.3781 www.gunold.com

Gunold Embroidery SoftwareORDER ITEM NO. DESCRIPTION SIZE

APPLIQUEPRO Software CD

AppliquéPROCreate, view and embroider appliqué like a pro with Gunold’s AppliquéPRO software.This program has all the features and functions necessary to complete the full process of appliquéing either your own original line art, True Type fonts, ten pre-loaded, fully-digitized and adjustable fonts along with numerous pre-digitized shapes, etc.Special features:

• Embroidery simulation tools to enable you to see how the design will sew out before you lay the first stitch (slow redraw, 3D, fabric effects),

• Imports art from various formats.*

• Exports designs or letters to various cutter formats. **

• Full editing functions for custom appliqué creation,

• Extensive alignment controls along with resize, rotate, and reposition.

• Gunold’s thread palette,

• Various stitch designs available - run, steil, appliqué, twill, and multiple stitch patterns.

*Import Art Formats: AI, DXF, EMF, EPS, FCM PLT, SVG, WMF**Export Art Formats: AI, DXF, FCM, PLT, SVG

Save Sew File Formats: Barudan (DOS(DAT), Barudan DOS (USX.A:/U01), Gunold (GUN), Happy (TAP), Juki (M3), KSM (KSM), Melco (CND), Melco/Bernina (EXP), Style (STL), SWF (SST), Tajima (DSB), Tajima (DST), Tajima (DSZ), Toyota (10o), ZSK DOS (ZSK)

VintageFontsOld school is cool again!

Instantly Increase your shop’s productivity and profits with over 16 vintage style, fully digitized, commercial, keyboard lettering fonts specifically digitized for 12 Wt. thread.

SnapFonts Collection Font SoftwareORDER ITEM NO. DESCRIPTION SIZE

VINTAGEFONTS Software CD

SnapFonts Collection Font Software (continued)

46 1.800.432.3781 www.gunold.com

SOFT

WAR

E

Gunold Embroidery SoftwareORDER ITEM NO. DESCRIPTION SIZE

VISUALEYES Software CD

VisualEYESGunold VisualEYES enables you to see any embroidery design file on your computer as an image, thumbnail, or icon using Microsoft™ Windows File Explorer. Simply browse to the location of your files, right-click on the screen to select “View”, and select the desired size you wish to preview your embroidery files.

In addition, as an ambassador to the Be the Difference Foundation, Gunold USA has included over 23 free, open-license, emboidery designs supporting the fight against cancer. With the purchase of this software module, you can profit and “be the difference” too!

Supported Formats:

• Barudan DOS (DAT)

• Barudan DOS (UXY)

• Gunold (GUN)

• Happy (TAP)

• Juki (M3)

• KSM (KSM)

• Melco/Bernina (EXP)

• SWF (SST)

• Tajima (DSB)

• Tajima (DST)

• Tajima (DSZ)

• Toyota (10o)

• ZSK DOS (ZSK)

Minimum System Requirements: Windows7, Windows 8, Windows 10, Vista, P3 300Mhz, 100MB hard drive space, 128MB RAM, DVD Drive, 800 x 600 display, Mouse, Internet Access.

47

Check out our video library to watch helpful product videos and how to’s. We update our video library with new videos all the time!

Visit: https://www.gunold.com/fm/media/

Follow us on Facebook to keep up with our latest sales and events.

Visit: https://www.facebook.com/gunold

Subscribe to our YouTube channel to learn embroidery tips and tricks from our educational videos.

Visit: https://www.youtube.com/user/GunoldUSA

Digitizing, Art, And Color Separation ServicesGet 50% off your first order! Use code GUND-C9A98634.

Visit: https://www.gunolddigitizing.com

Digitizing• Created for high volume production• Artwork preparation• Digital sew outs - see before you buy• Native files• Our logos use 10-20% less stitches

Artwork• Conceptual art• Silk screening• Direct to garment production files• Engraving• Signage

Color Separation• Output for DTS or film• High end/simulated process separations

48

POLICIES & CONDITIONSPrices and Charges• All prices are subject to change without notice.

• All goods will be invoiced at prices on date of shipment and include charges for shipping and handling.

• There is a minimum order requirement.

• We accept Visa, Discover, American Express & MasterCard.

• Any COD shipment will incur a fee.

• We reserve title to the goods delivered pending payment in full.

Return Policy• No merchandise may be returned for credit without obtaining a prior authorization number.

• No merchandise will be accepted for credit after 30 days from the date of the invoice.

• All merchandise returned for credit must be unused.

• All cones of thread returned for credit must be sealed in the original plastic wrapper.

• All returns are subject to a restocking charge of 10% of the product retail price.

Terms of Sale• FREE SHIPPING & HANDLING is available on internet orders shipped anywhere in the continental

U.S. (excludes Alaska and Hawii). Visit our website (www.gunold.com) for specific details.

• Customers with established credit may purchase on terms of “net 30 days.”

• Customers may use Visa, American Express, Discover or MasterCard.

• Overdue accounts may lead to delayed delivery and be switched to COD without prior notice.

• NOTICE: Gunold USA can only sell to customers who have a Sales and Use Tax Certificate.

• Gunold USA is not responsible for typographical errors.

CORPORATE OFFICE & SOUTHEAST WAREHOUSE980 Cobb Place BoulevardSuite 130Kennesaw, GA 30144Phone: 770.421.0300 • 800.432.3781Fax: 770.421.0505 • 770.429.3984

WEST COAST WAREHOUSEc/o: SDS22765-F Savi Ranch PkwyYorba Linda, CA 92887

NORTHEAST WAREHOUSE3 Choice RoadWindsor Locks, CT 06096

Documents

Product Catalog - Gunold