Upload
khangminh22
View
0
Download
0
Embed Size (px)
Citation preview
Index
LPG Dispensers and Meter Calibration Section A.
Spare Parts for LPG Dispensers Section A.1.
Fuel Dispensers Section B.
Fuel Tank Calibration
LPG Pump and Pumping Units
LPG Truck Equipment
Section C
Section B.1.
Section D
LPG Station and Automation system Section E
LPG Nozzles Section F
LPG Calibration Section G
Automation Solution Section H
LPG Valves Section I
LPG Safety Valves Section J
Actual products may vary from the ones presented in terms of shape, contents and/or dimensions because of changes of manufacturers.
For your orders and questions, please do not hesitate to contact us from our website: www.europump.com or our e-mail address: [email protected]
about us
Europump® was founded in 1994 as a manufacturer of petroleum equipment. Today, Europump is one of the leading companies in classic and alternative fuel technologies, especially in LPG.
At Europump, our mission is to offer quality products that satisfy international safety and technical requirements while maintain affordable costs.
Our main production facilities are located in Italy and Turkey. We have Europump branches and distributors worldwide we can serve our customers with a wide range of products from our factories and our many partners.
• ATEX and MID Certificated design.
• Single, Dual or Quad nozzle configurations.
• Two different measurement technology options:* High accuracy and 4-piston Positive Displacement MT100B
meters(Made in Italy).* Coriolis mass flow meters **(Made in Switzerland).
• Advanced electronic dispenser computer with backlitdisplays.
• Customer friendly field programming via alphanumerickeypad.
• Industry standard interface for automation systems.• Automatic Temperature Compensation (ATC) according to
ASTM tables.
• Electronic or mechanical calibration options.
• Volume, Amount or Mass** pre-programmed filling.
• Stainless steel or painted galvanize frame options.
• Optional MicroSDHC Card support for reports and logs.
• Optional Reciept Printer Support.
• Optional Multimedia Addons.
Europump® has been producing LPG Dispensers since 1998. This experience makes our dispensers one of the best quality and reliable LPG dispensers in the market. Our dispenser series are stylish, modern, well designed and efficient.
Our dispenser line has several options to meet the technical and regulatory approval requirements of different c ountries. S tylish s tainless s teel o r p ainted g alvanize f rames, I EC w iring m ethods t o Z one 1 hazardous locations, with CE approved components, and special European approvals (like MID, PTB, ATEX and Gost) are available on select models.
main features
lpg dispensers
1
product code
T2-SS2/P (painted)
T2-SS2/SS (stainless)
product code
T2-SL2/P (painted)
T2-SL2/SS (stainless)
next generation LPG dispensers
venice lpg series
2
Eurostar E2-SL/P
lpg dispenserseurostar e series
product code
E2-SL/P (painted)
E2-SL/SS (stainless)
3
Eurostar En-SM multimedia series
product code
E2-SM/P (painted)
E2-SM/SS (stainless)
lpg dispenserseurostar e series
4
Eurostar En-SL with Mass Flow Meter
Eurostar LPG dispenser with Mass Flow Meter provides the latest metering technology. Featuring high accuracy over an increased flow range, the meter lacks any moving parts; decreasing maintenance and calibration costs.
• Universally accepted Ex-approvals for hazardous areas.
• Maintenance-free meter operation: no moving parts or seals.
• Displays all the information you need during measuring likemass, volume, realtime density and temperature.
• Automatic Temperature Compensation according to ASTMtables.
• Maximum measuring accuracy:- Volume flow: 0.3% o.r.- Mass flow: 0.2% o.r.
• Compatible protocol with many forecourt automationsolutions.
• Flexible process connections: fillings for cylinders or autogas.
main features
nozzle configuration pcs 1-2-4
size cm 45 x 100 x 185 (h)
number of displays pcs 2-4
technical specifications
lpg dispenserseurostar e series
5
gene
ral s
peci
ficat
ions
model E1-SL painted E1-SL stainless E2-SL painted
product code E1-SL/P E1-SL/SS E2-SL/P
main features
• ATEX and MID approval.• Stand-alone design (fully self contained electronics).• Single or dual nozzle configurations.• PTB approved long life positive displacement piston meter.• Italian design nozzles with safety breakaways.• Stainless steel or painted iron frames.• Interface availability with Wayne-Dart compatible automation systems.• Automatic Temperature Compensation (ATC).• International currency options available.• Double bobbine selenoid valves.• Mechanical and electronic calibration.• Available preset sales as volume or amount.• Multimedia modules - optional with extra cost.
power 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz
accuracy Max. ± %0.25 Max. ± %0.25 Max. ± %0.25
flow rate 5-50 l/min 5-50 l/min 5-50 l/min
humidity range 5 - 95% 5 - 95% 5 - 95%
temperature range -40 ˚C +55 ˚C -40 ˚C +55 ˚C -40 ˚C +55 ˚C
hydr
aulic
nozzles 1 1 2
meter MT-100 MT-100 MT-100
seperators 1 1 1
filters 1 1 1
elec
tron
ic
cpu per dispenser 1 1 1
cpu model Europump Pro-C4 Europump Pro-C4 Europump Pro-C4
number of displays 2 2 2
display digits 8x6x6 / 6x6x5 / module display 8x6x6 / 6x6x5 / module display 8x6x6 / 6x6x5 / module display
display per nozzle 2 2 1
additional display per nozzle - - optional
multimedia screen - - -
keyboard per dispenser 1 1 1
preset buttons per nozzle 2 2 2
ATC probe system 1 1 1
communication protocol Wyn-Dart Wyn-Dart Wyn-Dart
communication interface 2 wire current loop 2 wire current loop 2 wire current loop
fram
e
frame material painted galvanizestainless steel
painted galvanize
stainless steel side frames - -
dispenser size (unpacked) 48x104x185 cm 48x104x185 cm 48x110x185 cm
dispenser size (packed) 63x128x197 cm 63x128x197 cm 63x128x197 cm
net weight (unpacked) 143.60 kg 145.00 kg 178.00 kg
gross weight (packed) 195.00 kg 193.60 kg 228.00 kg
lpg dispenserseurostar e series
6
lpg dispenserseurostar e series
gene
ral s
peci
ficat
ions
model E2-SL stainless E1-SL - MM painted E2-SL - MM painted
product code E1-SL/P/MM E2-SL/P/MM
main features
E-SL/SS
• ATEX and MID approval.
• Stand-alone design (fully self contained electronics).• Single or dual nozzle configurations.• PTB approved long life positive displacement piston meter.• Italian design nozzles with safety breakaways.• Stainless steel or painted iron frames.• Interface availability with Wayne-Dart compatible automation systems.• Automatic Temperature Compensation (ATC).• International currency options available.• Double bobbine selenoid valves.• Mechanical and electronic calibration.• Available preset sales as volume or amount.• Multimedia modules - optional with extra cost.
power 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz
accuracy Max. ± %0.25 Max. ± %0.20 Max. ± %0.20
flow rate 5-50 l/min 5-50 l/min 5-50 l/min
humidity range 5 - 95% 5 - 95% 5 - 95%
temperature range -40 ˚C +55 ˚C -40 ˚C +55 ˚C -40 ˚C +55 ˚C
note: can fill in liters or kilograms
hydr
aulic
nozzles 2 1 2
meter MT-100 Coriolis mass flow meter 8FE15
seperators 1 1 1
filters 1 1 1
elec
tron
ic
cpu per dispenser 1 1 1
cpu model Europump Pro-C4 Europump Pro-C4 Europump Pro-C4
number of displays 2 2 2
display digits 8x6x6 / 6x6x5 / module display module display module display
display per nozzle 1 2 1
additional display per nozzle optional - optional
multimedia screen - 19" 19"
keyboard per dispenser 1 1 1
preset buttons per nozzle 2 2 2
ATC probe system 1 1 1
communication protocol Wyn-Dart Wyn-Dart Wyn-Dart
communication interface 2 wire current loop 2 wire current loop 2 wire current loop
fram
e
frame materialstainless steel
painted galvanize painted galvanize
stainless steel side frames optional optional
dispenser size (unpacked) 48x110x185 cm 48x110x185 cm 48x110x185 cm
dispenser size (packed) 63x128x197 cm 63x128x197 cm 63x128x197 cm
net weight (unpacked) 176.40 kg 130.60 kg 138.60 kg
gross weight (packed) 226.40 kg 182.00 kg 220.00 kg
7
Eurostar T4-XL
Eurostar T4-XM
eurostar t series
product code
T2-XM(single nozzle each side)
T4-XM(dual nozzles each side)
product code
T2-XL(single nozzle each side)
T4-XL(dual nozzles each side)
lpg dispensers
8
lpg dispenserseurostar t series
gene
ral s
peci
ficat
ions
model T1-SL T2-SL T2-XL
main features
• ATEX and MID approval.• Stand-alone design (fully self contained electronics).• Single or dual nozzle configurations.• PTB approved long life positive displacement piston meter.• Italian design nozzles with safety breakaways.• Stainless steel or painted iron frames.• Interface availability with Wayne-Dart compatible automation systems.• Automatic Temperature Compensation (ATC).• International currency options available.• Double bobbine selenoid valves.• Mechanical and electronic calibration.• Available preset sales as volume or amount.• Multimedia modules - optional with extra cost.
power 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz
accuracy Max. ± %0.25 Max. ± %0.25 Max. ± %0.25
flow rate 5-50 l/min 5-50 l/min 5-50 l/min
humidity range 5 - 95% 5 - 95% 5 - 95%
temperature range -40 ˚C / +55 ˚C -40 ˚C / +55 ˚C -40 ˚C / +55 ˚C
hydr
aulic
nozzles 1 2 2
meter MT-100 MT-100 MT-100
seperators 1 1 1
filters 1 1 1
elec
tron
ic
cpu per dispenser 1 1 1
cpu model Europump Pro-C4 Europump Pro-C4 Europump Pro-C4
number of displays 2 2 2
display digits 8x6x6 / 6x6x5 8x6x6 / 6x6x5 8x6x6 / 6x6x5
display per nozzle 2 1 1
additional display per nozzle optional optional optional
multimedia screen - - -
keyboard per dispenser 1 1 1
preset buttons per nozzle 2 2 2
ATC probe system 1 1 1
communication protocol Wyn-Dart Wyn-Dart Wyn-Dart
communication interface 2 wire current loop 2 wire current loop 2 wire current loop
fram
e
frame material painted galvanize painted galvanize painted galvanize
stainless steel side frames optional optional optional
dispenser size (unpacked) 70x95x234 cm 70x95x234 cm 70x123x234 cm
dispenser size (packed) 88x118x248 cm 88x118x248 cm 88x143x248 cm
net weight (unpacked) 230.60 kg 263.40 kg 303.00 kg
gross weight (packed) 290.60 kg 330.00 kg 358.00 kg
9
lpg dispenserseurostar t series
gene
ral s
peci
ficat
ions
model T4-XL T2-XM T4-XM
main features
• ATEX and MID approval.• Stand-alone design (fully self contained electronics).• Single or dual nozzle configurations.• PTB approved long life positive displacement piston meter.• Italian design nozzles with safety breakaways.• Stainless steel or painted iron frames.• Interface availability with Wayne-Dart compatible automation systems.• Automatic Temperature Compensation (ATC).• International currency options available.• Double bobbine selenoid valves.• Mechanical and electronic calibration.• Available preset sales as volume or amount.• Multimedia modules - optional with extra cost.
power 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz 220 - 380 V AC 50 hz
accuracy Max. ± %0.25 Max. ± %0.25 Max. ± %0.25
flow rate
humidity range
5-50 l/min
5 - 95%
5-50 l/min
5 - 95%
5-50 l/min
5 - 95%
temperature range -40 ˚C / +55 ˚C -40 ˚C / +55 ˚C -40 ˚C / +55 ˚C
hydr
aulic
nozzles 4 2 4
meter MT-100 MT-100 MT-100
seperators 2 1 2
filters 2 1 2
elec
tron
ic
cpu per dispenser 1 1 1
cpu model Europump Pro-C4 Europump Pro-C4 Europump Pro-C4
number of displays 4 2 4
display digits 8x6x6 / 6x6x5 8x6x6 / 6x6x5 8x6x6 / 6x6x5
display per nozzle 1 1 1
additional display per nozzle - optional -
multimedia screen - 32" 32"
keyboard per dispenser 1 1 1
preset buttons per nozzle 1 1 1
ATC probe system 1 1 1
communication protocol Wyn-Dart Wyn-Dart Wyn-Dart
communication interface 2 wire current loop 2 wire current loop 2 wire current loop
fram
e
frame material painted galvanize painted galvanize painted galvanize
stainless steel side frames optional optional optional
dispenser size (unpacked) 70x123x234 cm 70x123x234 cm 70x123x234 cm
dispenser size (packed) 88x143x248 cm 88x143x248 cm 88x143x248 cm
net weight (unpacked) 373.00 kg 373.00 kg 443.00 kg
gross weight (packed) 438.00 kg 478.00 kg 518.00 kg
10
Fluid LPG liquid phase
Number of pistons 4
Nominal unit displacement 0.125 l
Nominal volume per turn 0.5 l
Accuracy ± 0.5%
Minimum flow 5 l/min (l 1/2 gal/min)
Maximum flow 50 l/min (12 gal/min)
Weight 19.6 kg
technical specificationsproduct code
MT100-A
flow metersmt-100a
11
flow metersmt100b
MT100B is a volumetric type flow meter with pistons. It has been specifically redesigned from its italian origins to measure the flow of LP Gas in the liquid phase, and may also be used for many other liquids. The design and materials used assure good wear and corrosion resistance, accuracy in the measurement at any delivery speed, steadiness of calibration and low maintenance costs.
• High quality Italian Casting.
• Excellent operational safety – reliable under extremeambient conditions.
• High accuracy of volume measurement even with lowflowrates.
• Corrosion resistance with bottom outlet design and stainless steel cylinder liners.
• Four point mechanical calibration.
• Mechanical or Magnetic Coupling options.
main featuresproduct code
MT100-B
12
lpg calibration
master meters
Europump LPG Master meters are the fast, reliable and efficient devices for calibration and measurement of commercial LPG Dispensers. Electronic Master meters include ATC (Automatic Temperature Correction). With mass-meter versions it is also possible to measure mass and density in real time.
Europump master meters are rugged, compact, simple to operate and have proven their reputation by weight and measurement authorities of several governments.
Hydrometer ASTME100-10 Density range 0.500-0.650 kg/m3
Scale division: 1 kg/m3Error limit: ± 1 kg/m3 Thermometer: 0+35 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
Hydrometer DIN12804Scale division: 0.0005 g/cm3 Error limit: ±0.0005 g/cm3 Thermometer: 0+30 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
• Working pressure 1500 kPa.
• ProLPG hose L= 1 mt.
• Needle valve PN40.
• Stainless pressure gauge Ø63 0-25 bar.
• Transparent resin cylinder for vapor LPG.
thermo densitometer
Portable instrument for determining the vapor pressure and the weight of liquified petroleum gas (LPG).
With this kind of equipment it is possible to determine the vapor pressure and weight of the liquid simultaneously with a single reading. Based on the data with the value of pressure measured on the pressure gauge it is possible to determine the percentange of propane and butane in the LPG mix.
main features
product code
COP-TD
13
image model / type product name notes dimensions weight unit
MT100-A MT100 LPG meter
Four piston long life LPG meterAccuracy: %0.25Capacity: 5-10 lt/minInlet/Outlet: 1”Metrological approval from PTB-Germany
23x23x23 cm 19.6 kg PCS
DV-100 Differential Valve3 way differential valveSpring pressure: 3 barDesign pressure: 25 barCast aluminium body
9 . 4 x 8 . 4 x 1 0 . 8 cm 0.8 kg PCS
SP-100 LPG Seperator 19.5x27x42 cm 9.4 kg PCS
SP-200 LPG Seperator 11x13x33.5 cm 4.4 kg PCS
CV-100 Check Valve 4x4x6.2 cm 0.4 kg PCS
RV-100 Safety Relief Valve 3.2x3.2x7.2 cm 0.4 kg PCS
213.53 Pressure Gauge 0-25 bar manometer 6.8x6.8x5.6 cm 0.2 kg PCS
FH-100Cartridge Filter
Housing
8.4x8.4x15 cm 3.2 kg
PCS
FH-101 12x12x19.5 cm 7 kg
CF-100 Cartridge Filter 5.4x5.4x7.5 cm 0.2 kg PCS
SF-100 Seperator Filter 6 . 5 x 6 . 5 x 1 2 . 5 cm 0.4 kg PCS
LH550-PR Trelleborg® LPG Hose 550 cm 4.36 kg PCS
LH500-PR Trelleborg® LPG Hose
LPG hose according to EN1762Type: MID: 19 mmOD: 31 mmFittings: 3/4”
500 cm 4.05 kg PCS
LH400-PR Trelleborg® LPG Hose
LPG hose according to EN1762Type: MID: 19 mmOD: 31 mmFittings: 3/4”
400 cm 3.44 kg PCS
LH050-PR Trelleborg® LPG Hose
LPG hose according to EN1762Type: MID: 19 mmOD: 31 mmFittings: 3/4”
50 cm 1.31 kg PCS
spare partsnon electrical
2
image model / type product name notes dimensions weight unit
SLVA220-34Solenoid valve
ASCO 3/4” - 220V double bobbin
6x10x16 cm 1.91 kg PCS
SLVA220-10Solenoid valve ASCO 1” - 220V double bobbin
8x16x14 cm 2 kg PCS
SLVA220-15Solenoid valve
ASCO 1.5” - 220V double bobbin
10x17x13 cm 2.75 kg PCS
SLVA220-20Solenoid valve ASCO 2” - 220V double bobbin
12x20x13 cm 4.76 kg PCS
C4MB4 PRO-C4 Mainboard 17.5x4x17 cm 0.745 gr PCS
C4RLY PRO-C4 Relay 10x4x11.5 cm 0.274 gr PCS
C4TL1 PRO-C4 Totalizer-1 Counter
7.5x2x11.5 cm
0.0455 gr PCS
C4TL2 PRO-C4 Totalizer-2 Counter
7.5x2x11.5 cm
0.0575 gr PCS
C4TL3 PRO-C4 Totalizer-3 Counter
7.5x2x11.5 cm 0.068 gr PCS
C4TL4 PRO-C4 Totalizer-4 Counter
7.5x2x11.5 cm 0.079 gr PCS
C4KYB PRO-C4 Keyboard 12x3x18.5 cm 335 gr PCS
C4MLD PRO-C4 Module display 14.5x4x18 cm 0.337 gr PCS
C4CLD PRO-C4 i2c Display 8x8x6 Digit 20x3x23 cm 0.31 gr PCS
C4PSUPRO-C4
Switching mode power supply
14.5x7x16 cm 0.776 gr PCS
S4MB4 S4 PRO-B CPU 19.5x3.5x21.5 cm
1.0645 gr PCS
S4KYB S4 PRO-B Keyboard 12x3x18.5 cm 335 gr PCS
S4TL1 S4 PRO-B Totalizer-1 Counter
7.5x2x11.5 cm
0.0455 gr PCS
spare partselectrical
3
spare partselectrical
image model / type product name notes dimensions weight unit
S4TL2 S4 PRO-B Totalizer-2 Counter 7.5x2x11.5 cm 0.0575
gr PCS
S4TL3 S4 PRO-B Totalizer-3 Counter 7.5x2x11.5 cm 0.068 gr PCS
S4TL4 S4 PRO-B Totalizer-4 Counter 7.5x2x11.5 cm 0.079 gr PCS
S4PSU S4 PRO-B Power Supply Unit 14.5x5.5x15 cm 0.976 gr PCS
S4C4MBS4 PRO-B / PRO-C4
MEMBRANE KEYPAD
12x17 cm 0.0175 gr PCS
S4DSP S4 PRO-B Display 8x8x6 LCD 20x3x23 cm 0.31 gr PCS
C4DCB PRO-C4 Data Cable 90 cm 0.073 gr PCS
S4DCB S4 PRO-B Data Cable 90 cm 0.073 gr PCS
BTMB2 BETA CPU 20x9x26 cm 1.09 kg PCS
BTKYB BETA Keyboard 10x3x17 cm 0.13 gr PCS
BTINT BETA INTBOX 4.5x5x7 cm 0.0705 gr PCS
BTDCB BETA Cable 50 cm 0.01 gr PCS
BTDSP BETA Display 8x8x6 LCD 20x2x23 cm 0.31 gr PCS
BTMBR BETA Membrane Keypad 10x13 cm 0.015 gr PCS
C4ATCPRO-C4
Temperature Probe for ATC
2.5 mt 0.1515 gr PCS
S4ATCS4 PRO-B
Temperature Probe for ATC
2.5 mt 0.1515 gr PCS
4
spare partselectrical
image model / type product name notes dimensions weight unit
BTATC BETA Temperature Probe for ATC 2.5 mt 0.1515
gr PCS
L2X16Screen for Keyboards
(C4/S4/BETA)2*16 Dotmatrix LCD 4x1.5x8.5 cm 0.0385
gr PCS
8DLCD 8 Digit LCD 4x1x17.5 cm 0.038 gr PCS
6DLCD 6 Digit LCD 4x1x13.5 cm 0.037 gr PCS
OOSW On/Off Switch 5x7 cm 0.086 gr PCS
PRBTN Preset Button(Green or Red) 3.5x 3x6 cm 0.027 gr PCS
ESBTN Emergency Button 4x3x7 cm 0.04 gr PCS
08-09 Shaft Pulse Encoder
2x50 Pulser 5V DC 9x6.5x13.5 cm 495 gr PCS
EPSE-01 Shaft Pulse Encoder
2x50 Pulser Mechanical Totalizer Output 7x6x15.5 cm 697 gr PCS
EPSE-MM Shaft Pulse Encoder
2x50 Pulser 5V DC 7x6.15.5 cm 697 gr PCS
DSRES Dispenser Heater 3x35 cm 0.143 gr PCS
CPPLC-1LPG Station
Control Panel with PLC
50x70x20 cm PCS
CPCLS-1Simple LPG Station
Control Panel without PLC
50x70x20 cm PCS
ROCLV Level Gauge Transmitter 1 mt 10 gr PCS
GDITK Gas Detector PCS
ESBEXEx-Proof
Emergency Stop Button
PCS
5
spare partselectrical
image model / type product name notes dimensions weight unit
ALRMS Alarm Siren PCS
C22075L LIYCY Cable 2x2x0.75 MT
C04250N NYY Cable 4x2.5 MT
C02150N NYY Cable 3x1.5 MT
C44000N NYY Cable 4x4 MT
C05150N NYY Cable 5x1.5 MT
INTLOCKInterlock-
Grounding Controller
PCS
AND10LB Anode 10 lb Magnesium PCS
RFECTR CU/CuSO4 Reference PCS
CATPS Cathodic Protection Set
Anode 7 pcs1 pcs Reference ElectrodeAnode JointsCathodic Protection Box
PCS
CATPB Cathodic Protection Box PCS
6
• Standalone design (fully self-contained electronics).
• Single, dual, quad, six or eight filling pointconfigurations.
• Long life hydraulic systems.
• Industry standard fuel nozzles with safetybreakaways.
• Stainless steel or painted iron cabinet options.
• Europump electronic computers with backlitdisplays.
• Field programming via alphanumeric keypad.
• Integrated money and volume totalizers.
• Interface availability with Wayne-Dart compatibleautomation systems.
• International currency options available.
• Automatic Temperature Compensation (ATC).
• Electronic Calibration.
• Pre-set filling as volume or amount.
• Multimedia addons.
main features
fuel dispensersA good fuel dispenser is key for the success of your petroleum station. Our experience and expertise in petroleum equipment helps us create one of the most reliable and long lasting fuel dispenser series in the market.
1
fuel dispensers
Nozzle configuration pcs 1 product / 1 nozzle / 1 display1 product / 2 nozzle / 2 display2 product / 2 nozzle / 2 display2 product / 2 nozzle / 4 display
Size cm 45 x 100 x 200 (h)
Number of displays pcs 2-4
Pumping System EE with suction pumpDE without pump
Flow Rate l/min 50-70 l/min120 l/min
technical specifications
eurostar ee & de series
2
technical specifications
Nozzle configuration pcs 1 product / 1 nozzle / 2 display1 product / 2 nozzle / 2 display2 product / 2 nozzle / 2 display2 product / 2 nozzle / 4 display3 product / 6 nozzle / 2 display4 product / 8 nozzle / 2 display4 product / 8 nozzle / 4 display
Size cm 45 x 123 x 230 (h)45 x 95 x 230 (h)
Number of displays pcs 2-4
Pumping System ET with suction pumpDT without pump
Flow Rate l/min 50-70 l/min120 l/min
fuel dispenserseurostar et xx-mp & dt xx-mp series
3
fuel dispensers
Nozzle configuration pcs 1 product / 1 nozzle / 2 display1 product / 2 nozzle / 2 display2 product / 2 nozzle / 2 display2 product / 2 nozzle / 4 display3 product / 6 nozzle / 2 display4 product / 8 nozzle / 2 display
Number of displays pcs 2
Pumping System EO with suction pumpDO without pump
Flow Rate l/min 50-70 l/min120 l/min
technical specifications
eurostar eo xx-m6 & dt xx-m6
4
fuel dispensers
eurostar ee xx-m3 and de xx-m3 series
image model / type hydraulic system
capacity (l/min)
fuel type nozzle display dispenser size (unpacked)
dispenser size (packed)
EUROSTAR EE11-M3 Suction 45/70 1 1 2
48x104x185 cm
63x128x197 cm
EUROSTAR DE11-M3 Dispenser 45/70 1 1 2
EUROSTAR EE12-M3 Suction 45/70 1 2 2
EUROSTAR DE12-M3 Dispenser 45/70 1 2 2
EUROSTAR EE22-M3 Suction 45/70 2 2 4
EUROSTAR DE22-M3 Dispenser 45/70 2 2 4
eurostar et xx-mp and dt xx-mp series
image model / type hydraulic system
capacity (l/min)
fuel type nozzle display dispenser size (unpacked)
dispenser size (packed)
EUROSTAR ET22-MP Suction 45/70 2 2 2
70x96x235 cm 75x110x247 cm
EUROSTAR DT22-MP Dispenser 45/70 2 2 2
EUROSTAR ET24-MP Suction 45/70 2 4 2
EUROSTAR DT24-MP Dispenser 45/70 2 4 2
EUROSTAR ET24-MP/4 Suction 45/70 2 4 4
EUROSTAR DT24-MP/4 Dispenser 45/70 2 4 4
EUROSTAR ET36-MP Suction 45/70 3 6 2
70x126x235 cm
75x140x247 cm
EUROSTAR DT36-MP Dispenser 45/70 3 6 2
EUROSTAR ET48-MP Suction 45/70 4 8 2
EUROSTAR DT48-MP Dispenser 45/70 4 8 2
EUROSTAR ET48-MP/4 Suction 45/70 4 8 4
EUROSTAR DT48-MP/4 Dispenser 45/70 4 8 4
5
fuel dispensers
Nozzle configuration pcs 1 product / 1 nozzle / 2 display1 product / 2 nozzle / 2 display2 product / 2 nozzle / 2 display2 product / 2 nozzle / 4 display3 product / 6 nozzle / 2 display4 product / 8 nozzle / 2 display
Number of displays pcs 2-4
Pumping System with builtin suction pumpor without pump
Flow Rate l/min 50-70 l/min120 l/min
technical specifications
Eurostar Venice series
6
fuel tank calibration
EuroCal Utimate Calibration System for Fuel Tanks
Europump offering complete tank calibration system to calibrate with Mass Meter calibrator/verifying meter and high accuracy Magnetostrictive probes. Our unique system gets cross measurement of devices combined together to prepare calibration tables automatically.
62
Calibration is the process of finding a relationship between two unknown quantities (when the measurable quantities are not given a particular value for the considered amount, or a standard for the quantity is not found). When one quantity is known, which is made or set with one device, another measurement is made in as similar a way as possible with the first device using the second. Europump is one of the oldest manufacturers and vendors of calibration devices for fuel and LPG.
The ZX-101XL can tell you if you are reading Gasoline or Ethanol Blended Fuels, helping you quickly measure any kind of fuel where and when you need it most.
Portable Octane and Cetane Analyzer
fuel calibration
61
lpg pumps
The pump can be thought of as the heart of an LPG Station, therefore it is very important to select a suitable product for your needs. We offer options for both truck and station applications.
brand & model Pr RoLPG T150 EP50-3x
pump type Turbine Side Channel
flow rate 50-130 l/min 50-120 l/min
inlet - outlet 1 1/2” - 1” 2 1/2” - 1 1/4”
working pressure 27.6 bar 27.6 bar
differential pressure 17.2 bar 17.2 bar
casting GG40 GG35
motor 3450 @ 60 Hz / 2880 @ 50 Hz 1450 @ 50 Hz
3.5 kW / 5.5 kW / 7.5 kW, Exproof 3.5 kW / 5.5 kW / 7.5 kW, Exproof
1
regenerative turbine pumps
Europump RT-150 is a regenerative turbine pump ideally suited for continuous duty on light liquids. Produces a maximum differential pressure of 10.3 bar and a flow rate up to 132 l/min.
27.6 bar
17.2 bar
O-ring Buna-N
Silic Cone arbide
- 1/2”1
1”
3450 rpm @ 60 hz r2880 pm
50@ hz
Working Temperatures -35°C / +100°C
technical specifications
Max Working Pressure
Max Differential Pressure
Impeller Bronze
S Seal eat
Inlet
Outlet
Motor
rt150
• Excellent for low flows and relatively high head pressures.
• Linear performance curve.
• Floating impeller design: no metal to metal contact.
• Minimal wear: impeller is the only moving part.
• Extremely quiet and free of vibrations.
• Smooth continuous flow.
• Made in Italy
main features
• Autogas dispensing.
• Cylinder filling.
• Vaporizer feed.
• Aerosol propellant.
• Direct burner feed.
• Bulk transfer.
applications
product code
RT150(pump only)
RT150-5.5-2915(pump with 5.5 kW 2915 rpm ATEX three phase motor on
baseplate with coupling and spark protection)
2
pumpsrt150 & spare parts
image model / type description
RT150 Regenerative turbine LPG Pump RT150 (pump only)
RT150-5.5-2915 Regenerative turbine LPG Pump RT150 with ATEX three phase motor 5.5kW, 2915 rpm on the base plate with coupling and spark protection
RT150-5.5-PSLPG Pumping Unit Skid (RT150 Pump + three phase motor 5.5 kW, 2900 rpm + bypass valve + monoblocks + manometer + safety valves + ball
valves on base plate with coupling) on the stand for the filling dispenser
RT150-5.5-PS-Y
LPG Pumping Unit Skid (RT150 Pump + three phase motor 5.5 kW, 2900 rpm + bypass valve + monoblocks +manometer + safety valves + ball
valves on base plate with coupling) on the stand to can fill storage tank and dispenser.
RT150-RKT Repair kit for RT150 pump O-Ring black
RT150-IMP RT150 impeller brass
RT150-SFT RT150 shaft
RT150-MS Mechanical seal for RT150
E041.A005 CARBIDE Carbide shallow for RT150
E041.A005 CARBON Carbon deep for RT150
CV100 Bypass valve 1"
DK38 Coupling for RT150 pump
3
side channel pumps
The EP50 series pumps are the ideal solution for pumping liquids involving high difference pressure, low NPSH condition and aerated liquids up to 50% gas from underground tanks. Six and Eight side channel models are available by custom order.
GG35
50 - 120
27.6 bar
17.2 bar
2 - 1/2”
1 - 1/4”
1450 rpm @ 50 hz
3.5 kW / 5.5 kW / 7.5 kW Exproof
technical specifications
Casting
Flow Rate
Max Working Pressure
Max Differential Pressure
Inlet
Outlet
Motor
ep50 series
product code EP50-36
(pump only)
EP50-38(pump only)
EP50-36-4-1430(pump with 6 stages EP50-36 with three phase ATEX motor 4 kW, 1430 rpm on the baseplate with coupling and spark protection)
EP50-38-4-1430(pump with 8 stages EP50-38 with three phase ATEX motor 4 kW, 1430 rpm on the baseplate with coupling and spark protection)
4
pumpsep50 series & spare parts
image model / type description
EP50-36 LPG multi stage side channel pump with 6 stages
EP50-38 LPG multi stage side channel pump with 8 stages
EP50‐36‐4‐1430LPG multi stage side channel pump with 6 stages EP50‐36
with three phase ATEX motor 4 kW, 1430 rpm on the baseplate with coupling and spark protection
EP50‐38‐4‐1430LPG multi stage side channel pump with 8 stages EP50‐38
with three phase ATEX motor 4 kW, 1430 rpm on the baseplate with coupling and spark protection
Impeller 1x impeller for EP50 series pumps
Shaft 6 Stages 1x shaft for EP50-36
Shaft 8 Stages 1x shaft for EP50-38
Mechanical Seal 1x mechanical seal for EP50 series pumps
Carbon Bushing 1x bushing for EP50 series pumps (carbon)
Bronze Bushing 1x bushing for EP50 series pumps (bronze)
Impeller Housing 1x impeller housing
Impeller Cover 1x impeller cover
Suction Impeller 1x suction impeller
Stage Seal 1x 0.8 mm stage seal
Bearing 1x bearing
5
pumpslpg pumping units
image description power (kw)
frequency (hz)
speed (rpm)
weight (kg)
Unit with regenerative turbine pump RT150 5.5 50 2915 120
Unit with multistage side channel pump EP50-38 4.0 50 1430 115
Portable LPG transfer pump EPV 200 with three phase
ATEX motor and V-belt drive5.5 50 1450 175
6
EPV200 with connection size 2", flow rate 220lt/minEPV350 with connection size 3", flow rate 490lt/min
image model / type description
EPV200 EP‐V200 LPG pump 2'' NPT (pump only)
EPV350 EPV350 LPG pump 3'' NPT (pump only)
EPV200-5.5 Portable LPG transfer pump 2" 200lt/min EPV200 with three phase ATEX motor 5.5 kW, 1450 rpm and V belt
pumpstransfer pumps
sliding vane pumps
The Sliding Vane design is ideal for butane, propane, anhydrous ammonia, propellants, refrigerants and similar liquefied gases. It is widely used for cylinder filling, motor fueling, bulk transfer, vaporizers, and on bobtails and transports.
available models
7
pumpsepv series
№ description № description
1 Case
q.ty in set
1
q.ty offered
1 19 Bearing
q.ty in set
2
q.ty offered
1
2 Cam 1 1 20 Cam Key Pin 2 1
3 Head 2 1 21 Grease Seal 2 1
4 Bearing Cap 2 1 22 Mechanical Seal Fitting Pin 2 1
5 Relief Valve Cap 1 1 23 Shaft Key 2 1
6 Shim 1 1 24 Inlet/Outlet Flange 2 1
7 Cam Key 1 1 25 Label 1 1
8 Poppet 1 1 26 Relief Fitting 4 1
9 Relief Valve Spring 1 1 27 Grease Zerk 2 1
10 Sideplate 2 1 28 Lubricap 2 1
11 Vane 6 1 29 O-Ring - Flage
O-Ring - Relief Valve Cap
O-Ring - Case
2 2
12 Vane Driver 3 1 30 1 1
13 Rotor-Shaft Assembly 1 1 31 2 2
14 Mechanical Seal 2 1 32 Relief Valve Cap Bolt 4 1
15 Thrust Bearing 2 1 33 Inlet-Outlet Flange Bolt 4 1
16 Bearing Race Mounting 2 1 34 Head Bolt 8 1
17 Grease Seal 2 1 35 Bearing Head Bolt 4 1
18 Bearing Cap Shim x x 36 Shaft Shield 1 1
8
25 bar
40 bar
25 bar
71-100 PSI
101-125 PSI
Inlet 1”
Outlet 1”
Weight 3.50 kg
technical specifications
Max Working Pressure
Static Test (under pressure - not connected)
Dynamic Test (under pressure - connected)
Differential Pressure
bypass valve
product code
CV100
Bypass valves are designed to protect pumps and hydraulic system components from excessive pressure damage by adjusting the differential pressure of the system.
effective solution for your station
ProLPG bypass valves are designed to protect pumps and hydraulic system components from excessive pressure damage by adjusting the differential pressure of the system. Custom vapor removal system built in. Differential pressure settings are available from 6.5 bar to 8 bar.
maximum durability
Designed specifically for maximum pressure requirements of pumps and LPG stations.
italian quality
Individually leak tested and inspected, traceable with serial numbers.
cv100
9
Europump supplies a wide range of ATEX motors, both seperately and as part of pump units. The II 2G EExe II series ex-proof motors are three phase asynchronous explosion proof, increased safety and totally enclosed IP 55 motors. They are adapted to operating in hazardous areas excluding mines due to the presence of explosive gases, vapors or mists (Group II).
• Rated outputs for continuous duty.
• Frequency 50 Hz.
• Environment Temperature: -15oC / +40oC.
• Insulation Class F.
• IP55 Certification.
• One free shaft extension according to dimension drawing.
• Terminal Box with glands and 6 x Terminal Board with 6 terminals,
Cable Glands Ex, External Earthing Terminal Ex, Auxiliary Terminal Ex.
• Power: 0.45 - 30 kW.
• HP: 1.0 - 40.0.
• Speed: 750 - 1450 - 2915 rpm.
main features
atex motors
10
atex motors
image model / type description
4,0-1430-IND Three phase ATEX motor 4.0 kW, 1430 rpm by Cantoni Group (Celma Indukta®)
5.5-2915-IND Three phase ATEX motor 5.5 kW, 2915rpm by Cantoni Group (Celma Indukta®)
5.0-1440-BROOK Three phase ATEX motor 5.0 kW, 1440 rpm by Brook Crompton®
5.5-2900-BROOK Three phase ATEX motor 5.5 kW, 2900 rpm by Brook Crompton®
11
The flow computer and indicating device R500 is specially designed by Europump for measuring system EPD500; it is the main component of this installation.In the application of Electronic Register (R500) give opportunity to observe the process of LPG delivery, recording and control of the filling transfer system.
The R500 can be programmed according to the customer’s requirements.
electronic registerr500
product code
R500
1
EPD500 is an electronic measuring system designed for all the measurement, delivery and reporting needs of LPG terminals, stations or tankers in compliance with the Directive of European Parliament and Council no. 2014/32/EU.
• Atex and Mid certification.
• No moving parts.
• 320x240 Color LCD graphic display (3.2”).
• Measurement principle: Coriolis or PD (optional).
• Measurement range: 0... 750 kg/min.
• Measurement accuracy: ± %0.2 ~ % 0.5.
• Minimum maintenance required.
• Measurement of mass, volume, density and
temperature simultaneously.
• Preset as amount of mass or volume.
• Deadman button.
• Electronic calibration.
• Serial port for printers RS485 - RS232.
• RFID card reader.
• Wifi.
• SD Memory.
• Optional pressure sensor.
• Languages: English, Italian, Russian, Turkish, Serbian
and Spanish.
• Operates at -25°C to 55°C.
• In compliance with the Directive of European
Parliament no. 2014/32/EU.
main features
mass flow meterepd500
product code
EPD-500-1/1/40(with electronic register
less printer)
2
flow metersmass flow meters
image code description
8FE15 8FE15‐AD2SAABAA1MN LPG mass 8FE15, DN15‐ Endress+Hauser® mass flow meter DN15
8FE25 8FE25‐AD2SAABAA1MN LPG mass 8FE25, DN25‐ Endress+Hauser® mass flow meter DN25
8FE40 8FE40‐AD2SAABAA1MN LPG mass 8FE40, DN40‐ Endress+Hauser® mass flow meter DN40
EPD-500-1/1/40EPD-500 LPG Truck Meter with Modbus digital communication with DN40 LPG mass flow meter by E+H and vapor separator, differential valve and filter by LC (less printer)
EPD-500-1/0/40 Mastermeter for truck meters (DN40) with mass flow meter (less vapor separator, differential valve, filter and printer)
3
Rate of flow 75-380 l/min
Working pressure 24 bar
Connections 2" FTP on inlet check valve and differential valve, flanged to meter for easy installation.
Register Veeder-Root, print or non-print
Temperature range -23 ºC to 52 ºC
Temperature compensator Compensates to 15 ºC
technical specifications
• Vapor Eliminator.
• Strainer.
• Differential Valve.
• Optional Trac-bearing Chamber.
• Optional Automatic temperature compensator.
• Internal and external parts are completely compatible with pre-existing, non-Liqua-Tech installations.
main features
Designed for bobtail trucks and bulk plants, the LPM-200 utilizes a durable, all-ductile-iron housing for reliability, durability and years of low-maintenance use.
2" LP-Gas Flow Meter for Trucks
lpm-200
flow meters
4
flow meterstcs-700
The 700 series rotary flow meter has no metal-to-metal contact, provides superior accuracy with low pressure drop, low maintenance and a long service life. The 700 series rotary flow meter has a simple and efficient meter design consisting of housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life. The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy.
• No metal-to-metal contact within the measuring chamber.- Low Pressure Drop.- Low Maintenance.
• Long Service Life.
• Light and Compact Design.
• Bi-directional Flow Direction.
• Wide Viscosity Range - up to 1,500,00 SSU (325,000 CPS).
• Meets NIST, OIML, ATEX, NMI, S.WA, SABS and many otherinternational weights & measures.
main features
5
EPV200 with connection size 2", flow rate 220lt/minEPV350 with connection size 3", flow rate 490lt/min
image model / type description
EPV200 EP‐V200 LPG pump 2'' NPT (pump only)
EPV350 EPV350 LPG pump 3'' NPT (pump only)
EPV200-5.5 Portable LPG transfer pump 2" 200lt/min EPV200 with three phase ATEX motor 5.5 kW, 1450 rpm and V belt
pumpstransfer pumps
sliding vane pumps
The Sliding Vane design is ideal for butane, propane, anhydrous ammonia, propellants, refrigerants and similar liquefied gases. It is widely used for cylinder f i lling, motor fueling, bulk transfer, vaporizers, and on bobtails and transports.
available models
6
Europump HR101-L is specially designed for the propane delivery industry. Available in galvanized or painted steel options to give you more control in protecting your LPG hoses.
• Avaliable for LPG hoses with diameters 3/4” to 1 1/4”.
• Hydraulic rewind option with gas pump.
• Stainless steel or galvanized body.
• Inlet flange: 1 1/2" with flange.
• Outlet flange: 1 1/4" without flange. • Gear-driven crank rewind, #40 chain and sprocket drive, hydraulic or
compressed air motor or direct drive hydraulic rewind motor options.
• Design pressure: 25 bar.
• Dimensions: 53x54x60 cm.
main features
hose reelhr101-l
product code
HR101-L(with OEM pneumatic motor)
HR101-L(with USA pneumatic motor)
7
3” & 4” Flanged Internal Valves for Bobtail Delivery Trucks, Transports and Large Stationary Storage Containers
8
PartNumber
Operating Lever
PositionInlet
ConnectionOutlet
Connection
Closing FlowGPM Accessories
LP-Gas NH3
Pneumatic Actuator
Right Operation
LeftOperation
Single FlangeA3217AR160 A3217AL160
Right or Left
3” 300#ANSI RFModifiedFlange*
3” 300#ANSI RFFlange
160 145
A3217ARPAA3217RA
A3217ALPAA3217LA
A3217AR210 A3217AL210 210 190A3217AR260 A3217AL260 260 236A3217AR410 A3217AL410 410 372A3217AR510 A3217AL510 510 459
Double FlangeA3217DAR160 A3217DAL160
Right or Left
3” 300#ANSI RFModifiedFlange*
3” 300#ANSI RFFlange
160 145
A3217ARPAA3217RA
A3217ALPAA3217LA
A3217DAR210 A3217DAL210 210 190A3217DAR260 A3217DAL260 260 236A3217DAR410 A3217DAL410 410 372A3217DAR510 A3217DAL510 510 459
* Valve supplied with 16 nuts and 8 studs for mounting.**Modified bore=4⅝” diameter with 5¾” diameter raised face.
A3217A & A3217DA
Part Number* Inlet Connection Outlet Connection
Closing Flow GPM*** Accessories
LP-Gas NH3 Pneumatic ActuatorRemote Thermal
Release
A3219FA400L
4” 300# ANSI RF Modified Flange**
4” 300# ANSI RF Flange
400 360 A3219FPA A3219RA A3219RT (2)
A3219FA600L600 540
A3219FA600W- A3219W
A3219FA400W 400 360* Valve supplied with 16 nuts and 8 studs for mounting.** Modified bore = 5 7/8” diameter with 7” diameter raised face.*** Other closing flows available
A3219FA
A3219RAA3219FPA
A3219 Series
9
A3212R Series
Part Number
Inlet Connection
M. NPT
Outlet Connection
F. NPT
Closing Flow (GPM)Half Coupling
Closing Flow (GPM)Full Coupling
A B C
Accessories
LP-Gas NH3 LP-Gas NH3Thermal
LatchPneumatic
ActuatorRotary
Actuator
A3212R 105
2”
2”105 95 65 59
19/16”
411/16”
345/64” A3213TL *A3213PA A3212RA
A3212R T105 2” T-body 415/16”A3212R 175 2”
175 158 100 90411/16”
A3212R T175 2” T-body 415/16”A3212R 250 2”
250 225 130 117411/16”
A3212R T250 2” T-body 415/16”* For the old A3212A Series please use the A3212PA Pneumatic Actuator
Threaded Internal Valves For Bobtail Delivery Trucks, Transports and Stationary Storage Tanks A3212 and A3213D Series
A3212 Series
A3213D Series
A3213PA
A3213RA
A3213TL
Part NumberInlet
Connection M.NPT
Outlet Connections
F.NPT
Closing Flow Half Coupling (GPM)
Closing Flow Full Coupling (GPM)
Vapor Closing Flow (SCFH) Accessories
LPG NH3 LPG NH3 25 PSIG Inlet100 PSIG
InletPneumatic
ActuatorRotary
ActuatorThermal
Latch
A3213D150
3” 3”
150 135 125 113 26,900 45,900
A3213PA A3213RA A3213TL
A3213D200 200 180 160 144 32,300 55,100
A3213D300 300 270 250 225 50,500 86,500
A3213D400 400 360 325 293 71,400 121,300
A3213DT150* 150 135 125 113 26,900 45,900
A3213DT200* 200 180 160 144 32,300 55,100
A3213DT300* 300 250 250 225 50,500 86,500
A3213DT400* 400 325 325 293 71,400 121,300
* T-body design
A3213D Series
10
Flomatic® Internal Valves for Bobtail Delivery Trucks, Transports and Large Stationary Storage Tanks A7883FK and A7884FK
Application
Less Maintenance
Easily replaceable, high efficiency external filter removes contaminant’s as small as 20 microns. Filter virtually eliminates orifice clogging, excessive internal filter maintenance and service downtime. No need to check or replace air lines, cables or cable connections.
Fully Internal “Pop-Action” Pressure Relief Valves for Transports and Bobtail Delivery Vehicles A8434 and A8436 Series
11
A8434-SERIES
* Per NFPA Pamphlet #58, Appendix D. Area shown is for UL or ASME flow rating—whichever is larger.
Part Number
Start To Discharge
Setting PSIG
A Container
Connection
BOverall Height
(Approx.)
CHeight Above
Coupling (Approx.)
UL(At 120% of Set
Pressure)ASME (At 120% of
Set Pressure) LP-Gas NH3 PropyleneProtective Cap
(Included)
A8434G 2502” M. NPT 91/16” ½” 3700
3456
YesYes No
A8434-11BA8434N 265 3659A8436G 250
3” M. NPT 17⅞” ¾”10210
9598
A8436-11BA8436N 265 9839
VA8436G 250-
9596No Yes
VA8436N 265 9839
12
1” Rotogages® for Large Mobile and Stationary Containers A9090 Series
Tubes for use with A9090 Series Roto Gauges Cut to length required.
Service Part NumberUp to 48” A9091-M24.0Up to 72” A9091-M36.0Up to 96” A9091-M48.0
Up to 120” A9091-M60.0Up to 144” A9091-M72.0
* Dial permits higher filling level, per NFPA 58,
Part Number Service Container SizeA9091-18L
A9091-18LX*A9091-18N NH3
* Supported DesignNOTE: The dip tube must be cut to the required length (1⁄2” of container inside diameter minus 53⁄4”).
Part NumberFor Container Inside Diameter
For Use WithLP-Gas
For Use WithNH3 Ellipsoidal Heads Hemispherical Heads
For Mobile or Stationary Containers
For StationaryContainers Only
For Mobile or Stationary Containers
For StationaryContainers Only
SideMounted
EndMounted
SideMounted
EndMounted
9091RM24 - AA9091RM24 - 30” - 45” 30” - 75” 30” - 45” 30” - 45”9092RM36 - AA9092RM36 - 46” - 61” 76” - 108” 46” - 61” 46” - 61”
9093TSM48* 9093RSM48 AA9093TSM48* AA9093RSM48 62” - 79” 109” - 147” 62” - 79” 62” - 79”9094TSM60* 9094RSM60 AA9094TSM60* AA9094RSM60 80” - 99” - 80” - 99” 80” - 99”9095TSM72* 9095RSM72 AA9095TSM72* AA9095RSM72 100” - 147” - 100” - 147” 100” - 147”
Rotogages® are designed to provide an accurate determination of LPGas or anhydrous ammonia container contents. They mount in a standard 1” NPT coupling on large mobile or stationary containers.To operate the Rotogages®, the vent valve is opened and the dip tube rotated slowly from the container vapor space to the liquid space. The difference in appearance of the discharge indicates when the liquid level is reached. Dial readings then indicate the percentage of product in the container.
13
Quick-Acting Minimum Loss Hose-End Valves for Bobtail Delivery Trucks and Dispensing Stations A7793A and A7797A
A7793
* To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square root of pressure drop. Example: A7797 @ 9 PSIG = 16.0 x√9 = 48.0 GPM/propane. For NH3 flow, multiply propane flow by .90.
Part Number Inlet Connection (F. NPT) Outlet Connection (F. ACME) Locking HandleFlow at 1 PSIG (Cv) Pressure Drop* (GPM/
Propane)
A7793A ¾” 1 ¾” Yes 16.0
A7797A 1” 1 ¾” Yes 16.0
Application
Designed to vastly reduce the amount of product vented when disconnecting bobtail delivery trucks, dispensing systems and anhydrous ammonia nurse tanks. These valves provide instant, full-on flow at the flip of a handle. Shut-off is instant and the handle locks for added protection. This “top of the line” hose-end valve is a fully contained unit that does not require additional filling adapters or connectors.
A7707L
A7708L
* To obtain approximate flow at other than 1 PSIG pressure drop, multiply flow in table by square root of pressure drop.Example: A7708L @ 9 PSIG = 22.0 x 9 = 66.0 GPM/propane. For NH3 flow, multiply propane flow by .90.
* * See appropriate catalog section for additional information.
Part Number Body DesignInlet & Outlet
Connection (F. NPT)Locking Handle
Flow at 1 PSIG Pressure Drop (Cv) (GPM/Propane)**
Accessories
Filling Connectors**
Extended Compact
Steel Brass Steel
A7707L Straight1” Yes
18.0A7575L4 3175A A3175A
A7708L Angle 22.0
Application
Designed especially for safe operator handling of LP-Gas in bobtail delivery truck, dispensing systems and anhydrous ammonia nurse tank service.These valves provide instant, full-on flow at the flip of the handle and provide instant positive shut-off with a handle lock for added protection.
Quick-Acting Hose-End Valves for Bobtail Delivery Trucks and Dispensing Stations A7707L and A7708L
The 6300 Series Magnetel® liquid-level gauges are designed to accurately determine the percentage of total tank volume for most liquids in stationary-storage applications. UL listed for LP Gas and NH3 service.
The large, easy-to-read dials are also easy to remove and replace. Materials of construction vary depending on the types of liquids to be gauged. Many different optional features are available to meet your specific needs. These materials and options, along with their pricing impact, are summarized for each model in the price list.
Magnetel® gauges are designed for working pressures ranging from atmospheric to 31 bar.
These Magnetel® Gauges are available in four basic models:
• Model 6336 - Incorporates 4" (100 mm) dial and is designed for top mounting.
• Model 6360 - Incorporates 8" (200 mm) dial and is designed for top mounting.
• Model 6339 - Incorporates 4" (100 mm) dial and is designed for side, end or angle mounting.
• Model 6342 - Incorporates 8" (200 mm) dial and is designed for side, end or angle mounting.
main features
6300 series
level gauges
1” magnetic liquid-level gauges for lp gas service
model / type
head material mounting dial type
B8981 Brass Top JR 40 mm
8981 Zinc Top JR 40 mm
8900 series
applicationGauging LP Gas levels in ASME tanks and DOT Cylinders.
main featuresThis series of 1” NPTF Junior™ gauges is available with Forged
brass head.
14
couplings
image code description
L231B4471L231B4471 LPG TANK UNIT SS/VI LT 2"LPG Tank Unit in INOX 316 for LPG, Socket 71mm, flange DN 50 UNI PN 25/40, Seals: Viton LT, PS 25 bar
C200D1300C200D1300 RUBBER CAP FOR LPG T.U. 71mmRubber cap for quick connectionMale socket 71 mm
L124A4471
L124A4471 LPG TANK UNIT SS/VI LT 1"-DN25 PN 25/40 LPG Tank unit 1 " (56 mm) in INOX 316with flanged connection DN 25 PN 25/40.Seals in FKM-LT (Viton LT).PS 25 bar.
C100D1300C100D1300 RUBBER CAP FOR LPG T.U. 1"Rubber cap for quick connectionMale socket 56 mm
M210A4471A
M210A4471A LPG HOSE UNIT 2" BSP SS/VI LT SOCKET 71mm LPG Hose Unit INOX / VI LT2 " socket 71 mmwith female thread 2 " BSPPS 25 bar
V200A2201 V200A2201 CAP FOR LPG HOSE UNIT, SOCKET 71 MMPlastic cap 2 " (71 mm) for LPG Hose unit 2 " (71 mm)
M103A4471A
M103A4471A LPG HOSE UNIT 1"-1" BSP SS/VI- LTLPG Hose Unit in 316 INOX for LPG56mm socket, 1 "BSP connectionSeals: Viton LTPS 25 bar
V100A2201 V100A2201 CAP 1" FOR LPG HOSE UNITPlastic cap 1"
15
Europump LPG Skid filling stations are specially designed for people who are looking for compact and ready-to-go solutions for dispensing LPG to cars or cylinders.
• Ready to work autogas station solution with steelchassis. Low investment costs.
• Quick return of investment. Minimum workmanship and engineering on site.
• Flexible and modular design.
• Simple layout and maximum safety.
• The plant can be made independent from externalpower supply (for example in rural areas) with LPG/NG Generator.
• Easy to operate. Comprises all the necessaryequipment for safe and reliable filling operation.
main features
skid stationslpg skid system
1
LPG Skid System with 5MT above-ground tank and single LPG dispenser with Swiss mass flow meter for cylinder bottle filling.
• 10,000 liters (5MT) or 20,000 liters (10MT) LPG above-ground tank(made according to standard EN13445, Gost material accordingto EN10028-03) with Rego® valve, rotogauge, Rochester® levelindicator, thermometer and manometer, sunshield and bottomsteel plate.
• E1-SL/P/MM Eurostar single nozzles dispenser with painted steelframe and one Swiss mass flow meter /one filling head for cylinderbottle filling (one filling head, one module display).
• [RT150-5.5-PS] LPG Pumping Unit Skid (RT150 Turbine Pump + 5.5 kW motor, 2900 rpm+bypass+safety valve+monoblock+manometerson baseplate with coupling) on the stand.
• [CP-PLM] LPG Control panel IP55 (for installation in safety zoneonly).
• [SE183KG] Gas Detector GPL 290mV (±20mV) corresponding 29mA (±2mA). - total 2 pieces.
skid stationslpg skid system
10,000 l (5mt)
22,000 l (10mt)
2
15,000 l (7.5mt)
40,000 l (20mt) - Optional
Our skid LPG stations are modularly designed so they can be customized according to customer needs. It may consist of the following components and features:
capacity m3 3/5/10/22/40
1200 (3-5 m3)
diameter mm 1600-1700-1900 (10 m3)
1900 (22 m3)
design pressure bar 17.3
test pressure bar 25.8
temperature range °C -20 ~ +70
design code AD CODE 2000
EN 13445, EN 10028-3
technical specifications
skid stationslpg storage tank
3
Pr RoLPG T150 EP50-3x
Turbine Side Channel
50-130 l/min 50-120 l/min
1 1/2” - 1” 2 1/2” - 1 1/4”
27.6 bar 27.6 bar
17.2 bar 17.2 bar
GG40 GG35
3450 @ 60 Hz / 2880 @ 50 Hz 1450 @ 50 Hz
3.5 kW / 5.5 kW / 7.5 kW, Exproof 3.5 kW / 5.5 kW / 7.5 kW, Exproof
technical specifications
brand & model
pump type
flo ratw e
inlet - outlet
work pring essure
differen prtial essure
casting
motor
RT150-5.5-PS RT150-5.5-PS-Y
EP50-38-5.5-PS
skid stationslpg pumping units
4
Description Quantity
Regenerative turbine pump RT150, Europump Italia SRL 1
Three phase ATEX motor 5.5 kW 2915 rpm, Cantoni Group 1
Baseplate with spark protection 1
Coupling for the pump 1
BBTKV-FS monoblock carbon steel DN25PN40 1
BBTKV-FS monoblock carbon steel DN40PN40 1
Safety valve 17.2 bar, Rego® 2
Code
[RT150]
[5.5-2915]
[BSP]
[DK38]
[BBTKV-FS25]
[BBTKV-FS40]
[3127G]
[CV100] Bypass valve CV100 1”, Europump Italia SRL 1
Ball valve DN20PN63 2
Manometer ø63 radial 0-25 bar
CL1.6, stainless steel w/ glycerin 1 or 2 (optional)
Chassis, steel painted 2
product code
RT150-5.5-PSLPG Pump Unit Skid
skid stationslpg pumping unit
5
Mini-skid LPG stations are used for small mobile LPG applications. It is a compact mobile LPG station which includes a dispenser, pump, and all other hydraulic systems that should be in a regular LPG station. All you need to do is to connect the inlet and return valve to the tank and connect the system to a power source.
Our skid dispensers can be manufactured with mechanical registers or with electronic register options.
• PTB approved meter.
• Electronic register with ATC / Mechanical register.
• IP65 electronic enclosure.
• RT150 tribune type LPG pump options.
• Exproof ATEX certified motor.
• Bypass valve.
• Flow rate: 5-50 lt/min.
• Electronic presetting as volume and price.
• Electronic system ATC - Automatic TemperatureCompensation.
• Automation system communication via CurrentLoop.
• Different password levels to control register.
• Automatic stop function when vehicle tank is full.
• Easy transport with Euro pallet sizes.
main features
electronic skid system mechanical skid system
skid stationsmini lpg illing stations - skid type
6
filling unit
unit type Classic Eurostar LPG Dispenser
Mechanical Dispenser Roman Scale Mechanical Clock
Scale
measurement system PD meter PD meter mechanical mechanical
filling units liter/gallon liter/gallon kilogram kilogram
volume measurement
mass measurement
density measurement
temperature measurement
temperature compensated
volume
filling nozzles 1 - 4 1 1 1
automation software correction
Electronic Filling Scale
electronic load cell
kilogram
1
gas leakage sensor
water sprinkler
Eurostar LPG Dispenser with Mass Meter
coriolis mass flow meter
liter/kilogram/gallon
1 - 4
tank level probe
tank level gauge
skid stationscomponents
7
lpg hand pumps
The EPHP is a hand operated LPG pump that can be used to transfer LPG from one tank to another. This pump meets the safety standards for handling highly compressed gases.
image code description
EP-MCS-M Mechanical Clock Scale - Manual bottle filling with mechanical filling head (air compressor not required)
8FE25 Mechanical Clock scale - Pneumatic cylinder bottle filling with pneumatic filling head less air compressor
EP-MCS-S Mechanical Clock scale - standard (without filling head)
EP-CFMPCylinder Filling Mini-Plant semi automatic filling head (RT150 pump /5.5kW Motor Italian Clock Scale pneumatic control (less air compressor)
EFC-8E+FHn6 LPG Electronic Filling Scales (EFC-8E) with Pneumatic Filling Heads (hook type for F-Valves)
product code
EP-HP
cylinder fillingequipment
8
cylinder filling
image model / type product features product description unit
ADB-JVM03
• Manual operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified• Brass construction
ADB Series LPG Cylinder Filling Heads are designed specifically for various types of cylinder valves. They can be produced as manual or automatic pneumatic-operated depending on the needs of the customer. Impermeable material suitable for LPG guarantees many years of service.
PCS
ADB-JVM04• Manual operation• For 12-45 kg cylinders• Valve Type: 27 mm• ATEX Certified
PCS
ADB-FVPUY02
• Pneumatic operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified• Working air pressure: 6-8
PCS
ADB-FVPU02• Manual operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified
PCS
ADB-PV01
• Pneumatic operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified• Working air pressure: 6-8
PCS
ADB-FVPU03
• Pneumatic operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified• Working air pressure: 6-8
PCS
ADB-JVYO01
• Pneumatic operation• For 12-45 kg cylinders• Valve Type: 27 mm• ATEX Certified• Working air pressure: 6-8• Brass construction
PCS
ADB-KTP03(Picnic Type)
• For 2-6 kg cylinders• ATEX Certified PCS
ADB-KTP02(Picnic Type)
• For 2-6 kg cylinders• ATEX Certified PCS
ADB-JVP02• For 12-45 kg cylinders• Valve type: 17 mm• ATEX Certified
PCS
ADB-3317• Manual operation• For 12-45 kg cylinders• ATEX Certified
PCS
ADB-3318
• Pneumatic operation• For 12-45 kg cylinders• Valve Type: 20-22 mm• ATEX Certified• Working air pressure: 6-8
PCS
equipment
9
EPD500 is an electronic measuring system designed for all the measurement, delivery and reporting needs of LPG terminals, stations or tankers in compliance with the Directive of European Parliament and Council no. 2014/32/EU.
• Atex and Mid certification.
• No moving parts.
• 320x240 Color LCD graphic display (3.2”).
• Measurement principle: Coriolis or PD (optional).
• Measurement range: 0... 750 kg/min.
• Measurement accuracy: ± %0.2 ~ % 0.5.
• Minimum maintenance required.
• Measurement of mass, volume, density and
temperature simultaneously.
• Preset as amount of mass or volume.
• Deadman button.
• Electronic calibration.
• Serial port for printers RS485 - RS232.
• RFID card reader.
• Wifi.
• SD Memory.
• Optional pressure sensor.
• Languages: English, Italian, Russian, Turkish, Serbian
and Spanish.
• Operates at -25°C to 55°C.
• In compliance with the Directive of European
Parliament no. 2014/32/EU.
main features
mass flow metterepd500
product code
EPD-500-1/1/40(with electronic register
less printer)
10
lpg calibration
master meters
Europump LPG Master meters are the fast, reliable and efficient devices for calibration and measurement of commercial LPG Dispensers. Electronic Master meters include ATC (Automatic Temperature Correction). With mass-meter versions it is also possible to measure mass and density in real time.
Europump master meters are rugged, compact, simple to operate and have proven their reputation by weight and measurement authorities of several governments.
Hydrometer ASTME100-10 Density range 0.500-0.650 kg/m3
Scale division: 1 kg/m3Error limit: ± 1 kg/m3 Thermometer: 0+35 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
Hydrometer DIN12804Scale division: 0.0005 g/cm3 Error limit: ±0.0005 g/cm3 Thermometer: 0+30 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
• Working pressure 1500 kPa.
• ProLPG hose L= 1 mt.
• Needle valve PN40.
• Stainless pressure gauge Ø63 0-25 bar.
• Transparent resin cylinder for vapor LPG.
thermo densitometer
Portable instrument for determining the vapor pressure and the weight of liquified petroleum gas (LPG).
With this kind of equipment it is possible to determine the vapor pressure and weight of the liquid simultaneously with a single reading. Based on the data with the value of pressure measured on the pressure gauge it is possible to determine the percentange of propane and butane in the LPG mix.
main features
product code
COP-TD
11
automation 4.0 is much more cost efficient than traditional automation solutions.
You can monitor your station from any smartphone, tablet or computer.
automation 4.0
automation 4.0 is a revolution.
We connect your dispensers, delivery/consumption meters, tank gauging probes, consoles, scales and everything else located in your station.
automation solutions
12
The main principle of the automation system is to connect and control all the fuel equipment in the station to interface units that are connected to the controller computer. Main software can control dispensers, trailers or bobtails, storage tanks, sensors, cameras etc.
Our extensive experience in the automation systems market makes us a first choice in petroleum automation applications.
• Pump automation.
• Tank automation.
• Customer and Vehicle Identification System.
• Station market and Accounting software.
• DVR and Camera system.
• Tanker Delivery Integration.
• PDA and Web Reporting tools.
station automation
• Liquid fuel tanker truck automation.
• LPG tanker truck automation.
• Tanker track over satellite.
• DVR Modules.
tanker truck automation
automation solutionsstation & truck automation
13
control panels
automation solutions
Europump Station Control Panel is specially designed for the monitoring and safety needs of your station. It comes in both exproof or non-exproof versions with the following specifications:
• Tank level monitoring.
• Alarms for low and high levels of tank liquid.
• Gas Sensor alarms.
• Pump and dispenser phase controls.
• Emergency stop button.
• Three phase electricity control.
• Level control for up to 2 tanks.
• Control up to 4 pcs gas sensor.
• 1 pcs x Gas alarm output.
• Control LPG pumps and dispensers based ontank levels.
• Set alarm levels for low and high tank levels.
• 16x2 LCD Information screen.
• Realtime clock.
• Plastic IP55 or ATEX certified Exproofenclosure.
• Optional RS232 Communication output.
CP-PLC-1-IP55 CP-EX(Exproof)
product code
CP-PLC-1
CP-EX(Exproof)
14
Tank Level Probe
Any Internet Browser
Head Office
CardReader
i-CONSOLE
BARCODE READER
GPRSMODEM
automation solutionsEmbeded Automation Solutions
LPG Station Applicaton
15
• Hard Rock Custom Designed Hardware.
• Power and Speed of RTOS!
• Forget PC operating system problems like unexpected updates, virus attacks or system
crashes.
• Onboard modular interface sockets with isolation and protection against surges.
• Use POS and forecourt equipment of any brands.
• Expendable with extension boards
• Direct connection to Cloud via Ethernet or WIFI.
• Remotely Updates and maintenance
• Online, Semi-Online and Standalone working modes
main features
Embeded Automation Solutions
automation solutions
i-Console
Petrol Station Applicaton
16
• Wet stock management from 8 tanks to 36 tanks based on models.
• Graphical display with resistive touch screen TFT 7”.
• Easy and smart configuration tool through local graphical interface or from cloud.
• Support for common tank level probes like Start, VeederRoot, MTS, Petrovend, Hectronics, Fafnir, Alisonic ...
• Automatic reconciliation.
• Dynamic and statical leakage.
• Tank auto-calibration.
• Deliveries, trends, events, alarms recording.
• Optional printer connection
• 16 pcs Digital Input
• 8 pcs Digital Output
• 8 pcs Analog Output
main features
i-Level
tank gauging systemsAutomatic Tank Gauging Consoles
i-Level-8P with printer
17
tank gauging systems
Supports tele-diagnostic/maintenance functions.
Internal sensor replacement without removing rod from
the tank.
Remote configuration of operation parameters.
Connection to the tank: fixed or adjustable thread/
flanged/inside riser.
Stainless Steel AISI 304/316 shaft.
Measuring range from 500 mm. up to 5.500 mm.
Calculation of data relating to:
• Product level in 0,01 mm.
• Interface level in 0,01 of mm. (water presence
detection).
• Product mean temperature up to max. 5 integrated
digital sensors.
Standard measuring accuracy: +/- 0,5 mm.
Standard resolution: +/- 0,01 mm.
Temperature accuracy range -20 +70 °C: +/- 0,2 °C.
Temperature resolution: ± 0,0625 °C.
The operation of Magnetostrictive Level Probe is based on the principle denominated Wiedemann effect
and allows a continuous and highly accurate reading of the level of liquids inside a tank.
A high frequency electric impulse is generated by the electronic device. In the exact point of intersection
with the magnetic field generated by the permanent magnet housed in the fl oat, a mechanical impulse
caused by the magnetostrictive torsional deformation is generated. The mechanical impulse travels at the
speed of sound in the wave guide up to the detector located in the measuring housing.
By measuring of the time elapsed between the sending of the initial signal and its return the exact position
of the floats along the rod is defined with 0,01 mm. resolution.
main features
18
tank gauging systemsLevel Probes
• Wet stock management up to 35 tanks.
• Graphical display with resistive touch screen TFT 7”.
• Easy and smart configuration tool through local graphical
interface or web.
• Communication protocols used by the more common station
management systems (Gilbarco, Doms, Dresser Wayne,
Tokheim, etc.).
• Automatic reconciliation.
• Dynamic and statical leakage.
• Tank auto-calibration.
• Deliveries, trends, events, alarms recording.
• PLLD (Pressure Level Leak Detection).
delphi exd/ss wired magnetostrictive level gauge
main features
• Stainless steel enclosure AISI 304, external diameter Ø 42 mm.
• Tank connection: in riser, threaded or flanged.
• S.S. pipe AISI 304/316 Ø 14/18 mm.
• N. 2 inox AISI 316/NBR floats Ø 42/52 mm.
delphi rs wired magnetostrictive level gaugemain features
19
tank gauging systems
• Measuring range up to 15 m.
• Stainless steel AISI 303 and Delrin enclosure Ø 42 mm.
• IP 68 degree protection up to 10 m. water submersion max. 24h.
• Tank connection: threaded or flanged.
• Corrugated stainless steel pipe AISI 316 Ø 18.0 mm.
• N. 2 INOX AISI 316 / NBR floats Ø 105 / 50 mm.
• Intrinsically safe construction 0 zone classified.
• Wired RS485 and wireless versions.
• Electrical features as above (see Delphi RS and Delphi RTD.
• Product level / mm.
• Interface level / mm (water presence detection).
• Product average temperature max 5 sensors.
• Measuring probe accuracy: ± 1.0 mm.
• Real probe resolution: ± 0.05 mm.
• Repeatability ± 0.2 mm.
delphi 485fx \ delphi rtd-fxflexible magnetostrictive probe - wired and wireless executions
main features
• Suitable for underground and above ground tank.
• Measurements up to 20 m.
• Remote communication.
• Accuracy ± 5 mm.
cyclops mechanical dial level indicatormain features
20
H
ID
OD
WHAT NEEDS TO BE KNOWN TO SIZE A ROCHESTER GAUGE : _____________________________________________________________
Absolutely needed to define STEM and FLOAT lengths.
OD : External diameter
ID : Internal diameter
H : Riser size
ANGLE TOP
SIDE END
Liquid to be gauged, with its density if specific.
Working pressure and temperature, if unusual.
Mounting position (see drawing).
-Shape of dished end for end mounting gauge-Tank drawing required for angle mounted gauge
Options : -Screws (UNF / Metric / none), Gasket (Buna-n / Teflon / none), Cover.-62** serie : dial size (40-50-100 mm diameter).-63** serie : Application: Mobile (63**M)or Stationary (63**S) tank,
dial size (100-200 mm diameter), TRIM n°, which specify the material according to the application, Mounting studs (centerline or straddle mounted).
If the tank to be gauged is not cylindrical and horizontal, always join a drawing with all the tank
dimensions and the position of the gauge.
For vertical tank, also specify the portion of the tank to be gauged and the total content.
STEM
FLOAT
level gauges6300 series
21
The 6300 Series Magnetel® liquid-level gauges are designed to accurately determine the percentage of total tank volume for most liquids in stationary-storage applications. UL listed for LP Gas and NH3 service.
The large, easy-to-read dials are also easy to remove and replace. Materials of construction vary depending on the types of liquids to be gauged. Many different optional features are available to meet your specific needs. These materials and options, along with their pricing impact, are summarized for each model in the price list.
Magnetel® gauges are designed for working pressures ranging from atmospheric to 31 bar.
• Model 6336 - Incorporates 4" (100 mm) dial and is designed for top mounting.
• Model 6360 - Incorporates 8" (200 mm) dial and is designed for top mounting.
• Model 6339 - Incorporates 4" (100 mm) dial and is designed for side, end or angle mounting.
• Model 6342 - Incorporates 8" (200 mm) dial and is designed for side, end or angle mounting.
main featuresThese Magnetel® Gauges are available in four basic models:
6300 series
level gauges
1” magnetic liquid-level gauges for lp gas service
model / type
head
material mounting dial type
B8981 Brass Top JR 40 mm
8981 Zinc Top JR 40 mm
8900 series
applicationGauging LP Gas levels in ASME tanks and DOT Cylinders.
main featuresThis series of 1” NPTF Junior™ gauges is available with Forged
brass head.
22
25 bar
40 bar
25 bar
40 l/min
1 cm3
-40°C / +100°C
technical specifications
M Wax ork Pring essure
Static Test (under pressure - not connected)
Dynamic Test (under pressure - not connected)
M Floax Raw te
Gas Lost After Disconnection
Working Temperatures
PRO LPG 300 A with aluminium sleeve
PRO LPG 300 B with brass sleeve
image number code description q.ty
1PRO300A Complete Nozzle
Aluminium 1
PRO300B Complete Nozzle Brass
2 ProLPG301 Body 1
3 ProLPG102 Bushing 1
4 ProLPG201 Ball 6
5 ProLPG202 Flexible Ring 1
6 ProLPG703 Inner Frame 2
7 ProLPG203 Ring 1
8 ProLPG304 Junction 1
9 ProLPG204 Ring 1
10 ProLPG305 Lever 1
11 ProLPG306 Fork 1
12 ProLPG307 Spring 2
13 ProLPG308 Push Button 1
14 ProLPG321 Bolt 1
15 ProLPG205 Nut 1
16 ProLPG309 Spring 1
17 ProLPG318 Valve 1
18 ProLPG119 Gasket 1
19 ProLPG320 Ring 1
20 ProLPG312 Head 1
21 ProLPG207 Lip Ring 1
22 ProLPG313 Piston 1
23 ProLPG112 Gasket 1
24ProLPG315 Sleeve (Aluminium) 1
ProLPG325 Sleeve (Brass) 0
25 ProLPG316 Hammer 4
ProLPG317 Complete Fork ProLPG 317 (306+307+308) 1 set
Set of Gaskets (LPG 0203, 0204, 0119, 0320, 0207, 0112) 1 set
22
25 24 23
1
10
11 12 13
15
2 3
4
5
6
8 9
7
14
21 20 19 18 17 16
lpg nozzlesprolpg 300
1
lpg nozzles
image code description
PRO300A Pro LPG 300A - Aluminium Nozzle (POS 1)
PRO300B Pro LPG 300B - Brass Nozzle (POS 1)
ProLPG711-AGSB 700 Series Nozzle Black Acme H
ZVG2ACME.1 ZVG2 ACME.1 LPG Acme Nozzle 1” with swivel joint 1” female BSP by ELAFLEX
LN-OEM OEM LPG NOZZLE
OT300B OPW OT300B Brass Nozzle by OPW
user-friendly single-action operation and ergonomic design
The entire fueling operation is initiated by simply engaging the nozzle to the receptacle with a single squeeze of the hand. Minimal force required.
maximum durability
Designed specifically for frequent coupling and uncoupling. Heavy-duty brass, aluminium or stainless-steel construction provides excellent corrosion resistance to the harsh fuelling environment.
safety
Will not dispense gas until securely engaged into an appropriate receptacle.Once engaged, will not disengage until released by operator.
2
lpg calibration
master meters
Europump LPG Master meters are the fast, reliable and efficient devices for calibration and measurement of commercial LPG Dispensers. Electronic Master meters include ATC (Automatic Temperature Correction). With mass-meter versions it is also possible to measure mass and density in real time.
Europump master meters are rugged, compact, simple to operate and have proven their reputation by weight and measurement authorities of several governments.
Hydrometer ASTME100-10 Density range 0.500-0.650 kg/m3
Scale division: 1 kg/m3Error limit: ± 1 kg/m3 Thermometer: 0+35 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
Hydrometer DIN12804Scale division: 0.0005 g/cm3 Error limit: ±0.0005 g/cm3 Thermometer: 0+30 °C in 0.5 0C
Filling: Hg1 error limit: ± 0.5 °C
• Working pressure 1500 kPa.
• ProLPG hose L= 1 mt.
• Needle valve PN40.
• Stainless pressure gauge Ø63 0-25 bar.
• Transparent resin cylinder for vapor LPG.
thermo densitometer
Portable instrument for determining the vapor pressure and the weight of liquified petroleum gas (LPG).
With this kind of equipment it is possible to determine the vapor pressure and weight of the liquid simultaneously with a single reading. Based on the data with the value of pressure measured on the pressure gauge it is possible to determine the percentange of propane and butane in the LPG mix.
main features
product code
COP-TD
1
automation 4.0 is much more cost efficient than traditional automation solutions.
You can monitor your station from any smartphone, tablet or computer.
automation 4.0
automation 4.0 is a revolution.
We connect your dispensers, delivery/consumption meters, tank gauging probes, consoles, scales and everything else located in your station.
automation solutions
1
The main principle of the automation system is to connect and control all the fuel equipment in the station to interface units that are connected to the controller computer. Main software can control dispensers, trailers or bobtails, storage tanks, sensors, cameras etc.
Our extensive experience in the automation systems market makes us a first choice in petroleum automation applications.
• Pump automation.
• Tank automation.
• Customer and Vehicle Identification System.
• Station market and Accounting software.
• DVR and Camera system.
• Tanker Delivery Integration.
• PDA and Web Reporting tools.
station automation
• Liquid fuel tanker truck automation.
• LPG tanker truck automation.
• Tanker track over satellite.
• DVR Modules.
tanker truck automation
automation solutionsstation & truck automation
2
control panels
automation solutions
Europump Station Control Panel is specially designed for the monitoring and safety needs of your station. It comes in both exproof or non-exproof versions with the following specifications:
• Tank level monitoring.
• Alarms for low and high levels of tank liquid.
• Gas Sensor alarms.
• Pump and dispenser phase controls.
• Emergency stop button.
• Three phase electricity control.
• Level control for up to 2 tanks.
• Control up to 4 pcs gas sensor.
• 1 pcs x Gas alarm output.
• Control LPG pumps and dispensers based ontank levels.
• Set alarm levels for low and high tank levels.
• 16x2 LCD Information screen.
• Realtime clock.
• Plastic IP55 or ATEX certified Exproofenclosure.
• Optional RS232 Communication output.
CP-PLC-1-IP55 CP-EX(Exproof)
product code
CP-PLC-1
CP-EX(Exproof)
3
Tank Level Probe
Any Internet Browser
Head Office
CardReader
i-CONSOLE
BARCODE READER
GPRSMODEM
automation solutionsEmbeded Automation Solutions
LPG Station Applicaton
4
• Hard Rock Custom Designed Hardware.
• Power and Speed of RTOS!
• Forget PC operating system problems like unexpected updates, virus attacks or system
crashes.
• Onboard modular interface sockets with isolation and protection against surges.
• Use POS and forecourt equipment of any brands.
• Expendable with extension boards
• Direct connection to Cloud via Ethernet or WIFI.
• Remotely Updates and maintenance
• Online, Semi-Online and Standalone working modes
main features
Embeded Automation Solutions
automation solutions
i-Console
Petrol Station Applicaton
5
• Wet stock management from 8 tanks to 36 tanks based on models.
• Graphical display with resistive touch screen TFT 7”.
• Easy and smart configuration tool through local graphical interface or from cloud.
• Support for common tank level probes like Start, VeederRoot, MTS, Petrovend, Hectronics, Fafnir, Alisonic ...
• Automatic reconciliation.
• Dynamic and statical leakage.
• Tank auto-calibration.
• Deliveries, trends, events, alarms recording.
• Optional printer connection
• 16 pcs Digital Input
• 8 pcs Digital Output
• 8 pcs Analog Output
main features
i-Level
tank gauging systemsAutomatic Tank Gauging Consoles
i-Level-8P with printer
6
tank gauging systems
Supports tele-diagnostic/maintenance functions.
Internal sensor replacement without removing rod from
the tank.
Remote configuration of operation parameters.
Connection to the tank: fixed or adjustable thread/
flanged/inside riser.
Stainless Steel AISI 304/316 shaft.
Measuring range from 500 mm. up to 5.500 mm.
Calculation of data relating to:
• Product level in 0,01 mm.
• Interface level in 0,01 of mm. (water presence
detection).
• Product mean temperature up to max. 5 integrated
digital sensors.
Standard measuring accuracy: +/- 0,5 mm.
Standard resolution: +/- 0,01 mm.
Temperature accuracy range -20 +70 °C: +/- 0,2 °C.
Temperature resolution: ± 0,0625 °C.
The operation of Magnetostrictive Level Probe is based on the principle denominated Wiedemann effect
and allows a continuous and highly accurate reading of the level of liquids inside a tank.
A high frequency electric impulse is generated by the electronic device. In the exact point of intersection
with the magnetic field generated by the permanent magnet housed in the fl oat, a mechanical impulse
caused by the magnetostrictive torsional deformation is generated. The mechanical impulse travels at the
speed of sound in the wave guide up to the detector located in the measuring housing.
By measuring of the time elapsed between the sending of the initial signal and its return the exact position
of the floats along the rod is defined with 0,01 mm. resolution.
main features
7
tank gauging systemsLevel Probes
• Wet stock management up to 35 tanks.
• Graphical display with resistive touch screen TFT 7”.
• Easy and smart configuration tool through local graphical
interface or web.
• Communication protocols used by the more common station
management systems (Gilbarco, Doms, Dresser Wayne,
Tokheim, etc.).
• Automatic reconciliation.
• Dynamic and statical leakage.
• Tank auto-calibration.
• Deliveries, trends, events, alarms recording.
• PLLD (Pressure Level Leak Detection).
delphi exd/ss wired magnetostrictive level gauge
main features
• Stainless steel enclosure AISI 304, external diameter Ø 42 mm.
• Tank connection: in riser, threaded or flanged.
• S.S. pipe AISI 304/316 Ø 14/18 mm.
• N. 2 inox AISI 316/NBR floats Ø 42/52 mm.
delphi rs wired magnetostrictive level gaugemain features
8
tank gauging systems
• Measuring range up to 15 m.
• Stainless steel AISI 303 and Delrin enclosure Ø 42 mm.
• IP 68 degree protection up to 10 m. water submersion max. 24h.
• Tank connection: threaded or flanged.
• Corrugated stainless steel pipe AISI 316 Ø 18.0 mm.
• N. 2 INOX AISI 316 / NBR floats Ø 105 / 50 mm.
• Intrinsically safe construction 0 zone classified.
• Wired RS485 and wireless versions.
• Electrical features as above (see Delphi RS and Delphi RTD.
• Product level / mm.
• Interface level / mm (water presence detection).
• Product average temperature max 5 sensors.
• Measuring probe accuracy: ± 1.0 mm.
• Real probe resolution: ± 0.05 mm.
• Repeatability ± 0.2 mm.
delphi 485fx \ delphi rtd-fx flexible magnetostrictive probe - wired and wireless executionsmain features
• Suitable for underground and above ground tank.
• Measurements up to 20 m.
• Remote communication.
• Accuracy ± 5 mm.
cyclops mechanical dial level indicatormain features
9
H
ID
OD
WHAT NEEDS TO BE KNOWN TO SIZE A ROCHESTER GAUGE : _____________________________________________________________
Absolutely needed to define STEM and FLOAT lengths.
OD : External diameter
ID : Internal diameter
H : Riser size
ANGLE TOP
SIDE END
Liquid to be gauged, with its density if specific.
Working pressure and temperature, if unusual.
Mounting position (see drawing).
-Shape of dished end for end mounting gauge-Tank drawing required for angle mounted gauge
Options : -Screws (UNF / Metric / none), Gasket (Buna-n / Teflon / none), Cover.-62** serie : dial size (40-50-100 mm diameter).-63** serie : Application: Mobile (63**M)or Stationary (63**S) tank,
dial size (100-200 mm diameter), TRIM n°, which specify the material according to the application, Mounting studs (centerline or straddle mounted).
If the tank to be gauged is not cylindrical and horizontal, always join a drawing with all the tank
dimensions and the position of the gauge.
For vertical tank, also specify the portion of the tank to be gauged and the total content.
STEM
FLOAT
level gauges6300 series
10
The 6300 Series Magnetel® liquid-level gauges are designed to accurately determine the percentage of total tank volume for most liquids in stationary-storage applications. UL listed for LP Gas and NH3 service.
The large, easy-to-read dials are also easy to remove and replace. Materials of construction vary depending on the types of liquids to be gauged. Many different optional features are available to meet your specific needs. These materials and options, along with their pricing impact, are summarized for each model in the price list.
Magnetel® gauges are designed for working pressures ranging from atmospheric to 31 bar.
• Model 6336 - Incorporates 4" (100 mm) dial and is designed for top mounting.
• Model 6360 - Incorporates 8" (200 mm) dial and is designed for top mounting.
• Model 6339 - Incorporates 4" (100 mm) dial and is designed for side, end or angle mounting.
• Model 6342 - Incorporates 8" (200 mm) dial and is designed for side, end or angle mounting.
main featuresThese Magnetel® Gauges are available in four basic models:
6300 series
level gauges
1” magnetic liquid-level gauges for lp gas service
model / type
head
material mounting dial type
B8981 Brass Top JR 40 mm
8981 Zinc Top JR 40 mm
8900 series
applicationGauging LP Gas levels in ASME tanks and DOT Cylinders.
main featuresThis series of 1” NPTF Junior™ gauges is available with Forged
brass head.
11
EPD500 is an electronic measuring system designed for all the measurement, delivery and reporting needs of LPG terminals, stations or tankers in compliance with the Directive of European Parliament and Council no. 2014/32/EU.
• Atex and Mid certification.
• No moving parts.
• 320x240 Color LCD graphic display (3.2”).
• Measurement principle: Coriolis or PD (optional).
• Measurement range: 0... 750 kg/min.
• Measurement accuracy: ± %0.2 ~ % 0.5.
• Minimum maintenance required.
• Measurement of mass, volume, density and
temperature simultaneously.
• Preset as amount of mass or volume.
• Deadman button.
• Electronic calibration.
• Serial port for printers RS485 - RS232.
• RFID card reader.
• Wifi.
• SD Memory.
• Optional pressure sensor.
• Languages: English, Italian, Russian, Turkish, Serbian
and Spanish.
• Operates at -25°C to 55°C.
• In compliance with the Directive of European
Parliament no. 2014/32/EU.
main features
mass flow meterepd500
product code
EPD-500-1/1/40(with electronic register less
printer)
12
lpg calibration
master meters
Europump LPG Master meters are the fast, reliable and efficient devices for calibration and measurement of commercial LPG Dispensers. Electronic Master meters include ATC (Automatic Temperature Correction). With mass-meter versions it is also possible to measure mass and density in real time.
Europump master meters are rugged, compact, simple to operate and have proven their reputation by weight and measurement authorities of several governments.
Hydrometer ASTME100-10 Density range 0.500-0.650 kg/m3 Scale division: 1 kg/m3Error limit: ± 1 kg/m3 Thermometer: 0+35 °C in 0.5 0C Filling: Hg1 error limit: ± 0.5 °C
Hydrometer DIN12804Scale division: 0.0005 g/cm3 Error limit: ±0.0005 g/cm3 Thermometer: 0+30 °C in 0.5 0C Filling: Hg1 error limit: ± 0.5 °C
• Working pressure 1500 kPa.
• ProLPG hose L= 1 mt.
• Needle valve PN40.
• Stainless pressure gauge Ø63 0-25 bar.
• Transparent resin cylinder for vapor LPG.
thermo densitometer
Portable instrument for determining the vapor pressure and the weight of liquified petroleum gas (LPG).
With this kind of equipment it is possible to determine the vapor pressure and weight of the liquid simultaneously with a single reading. Based on the data with the value of pressure measured on the pressure gauge it is possible to determine the percentange of propane and butane in the LPG mix.
main features
product code
COP-TD
13
ss-304 stainless steel / wafer / full bore / hand-lever operated
technical specificationsConnections : EN 1092
Pressure Level : PN40
Temperature : -30 ºC / +250 ºC
Applications : natural gas, LPG-LNG, fuel-oil,
pressurized air and other gases etc.
Connections : EN 1092
Pressure Level : PN40
Temperature : -30 ºC / +250 ºC
Applications : natural gas, LPG-LNG, fuel-oil,
pressurized air and other gases etc.
technical specifications
carbon steel / wafer / full bore / hand-lever operated
monoblock ball valvesbbtkv-fs
1
Dimensions : TS 9809 / EN 558
Connections : EN 1092 - 1/2
Pressure Level : PN40
Temperature : -30 ºC / +180 ºC
Applications : natural gas, LPG-LNG, fuel-oil,
pressurized air and other gases etc.
technical specifications
Dimensions : TS 9809 / EN 558
Connections : EN 1092 - 1 / 2
Pressure Level : 25
Temperature : -30 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
ductile iron / flanged / full bore / hand-lever operated
natural gas ball valvesbdkv-f -tg
carbon steel / flanged / full bore / hand-lever operated
2
carbon steel / threaded / full bore / hand-lever operated
natural gas ball valvesbdkv-di-tg
: TS EN 331
: EN 10226-1
: PN40
: -30 ºC / +180 ºC
Dimensions
Connections
Pressure
Level
Temperature
Applications
: LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
carbon steel / threaded / full bore / hand-lever operated
Dimensions : TS EN 331
Connections : EN 10226-1
Pressure Level : PN25
Temperature : -30 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
3
Dimensions : EN 558
Connections : EN 1092-1
Pressure Level : PN40
Temperature : -30 ºC / +180 ºC
Applications : cold/hot water, steam, pressurized air
technical specifications
natural gas ball valvesbkv-f -tg
carbon steel / flanged / full bore / hand-lever operated
4
Connections : EN 10226-1
Pressure Level : PN40
Temperature : +180 ºC
Applications : asphalt, goods and chemicals industries
technical specifications
carbon steel / threaded / full bore / hand-lever operated
bkv-cek-di-tg
: EN 558
: EN 1092-1
: PN40
: +180 ºC
Dimensions
Connections
Pressure
Level
Temperature
Applications
: asphalt, goods and chemicals industries
technical specifications
carbon steel / flanged / full bore / hand-lever operated
jacketed ball valvesbkv-cek-f -tg
5
: EN 10226-1
: PN40
: -30 ºC / +180 ºC
Connections
Pressure
Level
Temperature
Applications
: hot/cold water, steam, pressurized air
technical specifications
Connections : EN 10226-1
Pressure Level : PN25
Temperature : -20 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
ductile iron / threaded / full bore / hand-lever operated
ball valvesbkv-di-tg
carbon steel / threaded / full bore / hand-lever operated
6
ductile iron / flanged / full bore / hand-lever operated
Dimensions : TS 3148 / EN 558
Connections : EN 1092-1
Pressure Level : PN25
Temperature : -20 ºC / +180 ºC
Applications : cold/hot water, steam, pressurized air
technical specifications
ball valvesbkv-fl-tg
7
ball valves ansi class 150bkv-fl-tg
floating / carbon steel / flanged / full bore / hand-lever operated
: API 6D / ISO 14313Design
Dimensions : ASME B 16.10
: ASME B 16.5
: CLASS 150 (PN20)
: -29 ºC / +180 ºC
Connections
Pressure
Level
Temperature
Applications
: LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
trunnion / carbon steel / flanged / full bore / hand-lever operated
Design : API 6D / ISO 14313
Dimensions : ASME B 16.10
Connections : ASME B 16.5
Pressure Level : CLASS 150 (PN20)
Temperature : -29 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
8
trunnion / carbon steel / flanged / full bore / hand-lever operated
: API 6D / ISO 14313Design
Dimensions : ASME B 16.10
Connections : ASME B 16.5
Pressure Level : CLASS 300 (PN50)
Temperature : -29 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
floating / carbon steel / flanged / full bore / hand-lever operated
Design : API 6D / ISO 14313
Dimensions : ASME B 16.10
Connections : ASME B 16.5
Pressure Level : CLASS 300 (PN50)
Temperature : -29 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
ball valves ansi class 300bkv-fl-tg
9
ball valves ansi class 600bkv-fl-tg
trunnion / carbon steel / flanged / full bore / hand-lever operated
Design : API 6D / ISO 14313
Dimensions : ASME B 16.10
Connections : ASME B 16.5
Pressure Level : CLASS 600 (PN100)
Temperature : -29 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
10
floating / carbon steel / threaded / full bore / hand-lever operated
Design : API 6D / ISO 14313
Dimensions : ASME B 16.10
Connections : ASME B 1.20.1
Pressure Level : CLASS 800 Lbs (PN55)
Temperature : -29 ºC / +180 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
ball valves class 800 lbsbkv-di-tg
11
Connections : EN 10226-1
Pressure Level : PN16 / PN40
Temperature : -30 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
ball valves 3 ways L typebkv-3y-l-di-tg
carbon steel / threaded / full bore / hand-lever operated
12
Connections : EN 10226-1
Pressure Level : PN16 / PN40
Temperature : -30 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
ball valves 3 ways T typebkv-3y-t-di-tg
carbon steel / threaded / full bore / hand-lever operated
14
carbon steel / flanged / full bore / hand-lever operated
Dimensions : EN 558
Connections : EN 1092 - 1
Pressure Level : PN16 / PN40
Temperature : -30 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
ball valves 3 ways T typebkv-3y-t-fl-tg
15
carbon steel / threaded
Connections : EN 10226-1
Pressure Level : PN40
Temperature : -30 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
Dimensions : EN 558
Connections : EN 1092 - 1
Pressure Level : PN40
Temperature : -30 ºC / +180 ºC
Applications : hot/cold water, steam, pressurized air
technical specifications
check valvesbcv-fl
carbon steel / flanged
bcv-di
16
ductile iron / flanged
Dimensions : TS 11494 / EN 558
Connections : EN 1092 - 1/2
Pressure Level : PN25
Temperature : -40 ºC / +400 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
steel casting / flanged
strainersbpt-fl
Dimensions : TS 11494 / EN 558
Connections : EN 1092 - 1/2
Pressure Level : PN40
Temperature : -40 ºC / +400 ºC
Applications : LPG-LNG, natural gas, fuel-oil,
pressurized air and other gases etc.
technical specifications
17
Dimensions : EN 558
Connections : EN 1092 - 1/2
Pressure Level : PN16
Temperature : -10 ºC / +180 ºC
Applications : water, foodstuffs, chemistry, air and
other gases etc.
technical specifications
carbon steel / flanged
Dimensions : EN 558
Connections : EN 1092 - 1/2
Pressure Level : PN40
Temperature : -10 ºC / +180 ºC
Applications : water, foodstuffs, chemistry, air and
other gases etc.
technical specifications
sight glassesbag-fl
cast iron / flanged
18
cast iron / threaded
sight glassesbag-di
Connections : EN 10226-1
Pressure Level : PN16
Temperature : -10 ºC / +180 ºC
Applications : water, foodstuffs, chemistry, air and
other gases etc.
technical specifications
carbon steel / threaded
Connections : EN 10226-1
Pressure Level : PN40
Temperature : -10 ºC / +180 ºC
Applications : water, foodstuffs, chemistry, air and
other gases etc.
technical specifications
19
relief valves
Part Number
Start To Discharge
Setting PSIG
Container CorrectionM. NPT
Flow Capacity SCFM/Air* Tank Surface
Area up to:**
Accessories
UL (at 120% of Set Pressure)
ASME (at 120% of Set Pressure) Protective Cap Pipeaway Adapter
7534B 1252"
6.025 - 319 sq. ft.7534-40 7534-20***
7534G 250 11.675 10.422 708 sq. ft.
* Flow rates shown are for bare relief valves. Adapters and pipeways will reduce flow as discussed in the forewording information.** Per NFPA Pamphlet #58, Appendix D. Area shown is for UL or ASME - whichever is larger.*** 3" F. NPT outlet connection.
Part Number
Start To Discharge
Setting PSIG
Container Type
Container Connection
M. NPT
Overall Height
(Approx.)
Wrench Hex
Section
Flow CapacitySCFM/Air*
Tank Surface Area up to:***
Accessories
UL (at 120% of Set
Pressure)
ECII® rated at 480 PSIG**
Protective Cap
Pipeway Adapter
Part Number Outlet Size
3127G250 ASME
1/4" 1 31/32" 7/8" 295- - -
3129G 1/2" 2 10/32" 11/8" 465
3127K
375 DOT
1/4" 1 31/32" 7/8"
-
450 100 lbs/propane 3129-10 1/2" F. NPT
3129K 1/2" 2 10/32" 11/8" 780 200 lbs/propane
-
3129-10 1/2" F. NPT
* Flow rates shown are for bare relief valves. Adapters and pipeways will reduce flow as discussed in the forewording information.** Not UL or ASME rated. ECII® rated at 480 PSIG.*** Meets DOT requirements.
image model / type description
003127GExternal Hydrostatic Relief Valve 1/4" M. NPT
(Start To Discharge Setting PSIG 250)Container type: ASME
003127KExternal Hydrostatic Relief Valve 1/4" M. NPT
(Start To Discharge Setting PSIG 375)Container type: DOT
003129GExternal Hydrostatic Relief Valve 1/2" M. NPT
(Start To Discharge Setting PSIG 250)Container type: ASME
003129KExternal Hydrostatic Relief Valve 1/2" M. NPT
(Start To Discharge Setting PSIG 375)Container type: DOT
image model / type description
007534G Semi Internal Pressure Relief Valve 2" M. NPT(Start To Discharge Setting PSIG 250)
1
Part Number
Inlet Connection M. NPT
(A)
Outlet Connection F. NPT
(B)
Wrench Hex Flats(C)
Effective Length (Approx.)
(D)
Threaded End to Port
(E)
Approximate Closing Flow*
Liquid(GPM Propane)
Vapor SCFH (Propane)
25 PSIG Inlet
100 PSIG Inlet
2884D 3/4" 1/4" 11/16" 11/4" 11/16" N/A 60 110
* Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up and slightly less with outlet down.NOTE: Multiply flow rate by .94 to determine liquid butane flow.
Part Number
Inlet Connection M. NPT
(A)
Outlet Connection F. NPT
(B)
Wrench Hex Flats(C)
Effective Length (Approx.)
(D)Material
Approximate Closing Flow*
Liquid(GPM Propane)
Vapor SCFH (Propane)
25 PSIG Inlet
100 PSIG Inlet
12472
3/4" 3/4" 13/8" 13/8"Brass
4 1.050 1.700
3272E 10 2.100 3.700
3272F 15 2.800 5.000
3272G20 3.700 6.900
A3272G Steel
3282A
11/4" 11/4" 2" 116/18"Brass
30 5.850 10.000
3282B 40 7.600 13.600
3282C50 9.000 16.300
A3282C Steel
757411/2" 11/2" 21/4" 13/4"
Brass
90 15.200 28.100
7574L 70 14.000 25.000
3292A
2" 2" 27/8" 17/8"
75 14.200 24.800A3292A Steel
3292B Brass100 18.100 32.700
A3292BSteel
A3292C 122 22.100 37.600
* Based on horizontal installation of excess flow valve. Flows are slightly more when valves are installed with outlet up and slightly less with outlet down.
excess flow valvesimage model / type description
002884D Excess Flow Valve 3/4" M. NPT x 1/4" F. NPT
image model / type description
003272G Excess Flow Valve 3/4" M. NPT x 3/4" F. NPT BrassLiquid (GPM Propane) 20
A003292C Excess Flow Valve 2" M. NPT x 2" F. NPT SteelLiquid (GPM Propane) 122
2
Part NumberInlet/Outlet Connections
NPT. F
Disconnect Force Approx.
(lbs)
Reconnect Force Approx.
(lbs)
Length of Valve
LP-Gas Liquid Flow Capacity at Various Differential Pressures (GPM)*
5 PSIG 10 PSIG 25 PSIG 50 PSIG
A2141A63/4" 130 80 37/8" 11 16 25 36
A2141A6L*
A2141A81" 75 50 49/16" 21 30 47 67
A2141A8L*
A2141A10 11/4" 160 25 55/8" 52 75 120 170
A2141A16 2" 300 50 145/16" 250 350 550 750
* To determine NH3 flow capacity, multiply by .90.
pull-away valves
image model / type description
A002141A6L** Pull‐Away Valves 3/4" F. NPT with steel galvanized cable
A002141A8 Pull‐Away Valves 1" F. NPT
3
standard specification
• Standards certified: EN 50194.
• Power supply: 230 Vac (±10%) e 12Vdc.
• Absorption: 4VA (230Vca).
• Sensor: Catalytic.
• Alarm level: 10% LEL - Measuring range: 0÷20% LEL.
• Output relay: exchange contacts 3A 250Vac.
• IP Rating: IP42.
se138 standalone industrial gas detector with replaceable cartridge sensor atex certified for zone 1
The gas detectors in explosion-proof housing for use in potentially explosive atmospheres are Certificated CESI 03 ATEX 323 X extension n. 2.11 (31/04/2011) updated to EN60079-0: 2009 and EN60079-1: 2007 standards and characterized by the following Ex marking (Directive 9479/EC):
standard specification
• Ex marking : II 2G Ex d IIC T6 Gb.
• No. 3 Alarm relays solid state type. MAX resistive load 24V/1A SPST.
• No. 1 Fault relay solid state type. MAX resistive load 24V/1A SPST.
• Alarm levels (relays) programmables via DIP-Switch.
• No. 1 linear 4÷20 mA current output.
• Terminals plug-in polarized type.
gas detectors
gamma se230-se233-se296 natural gas and lpg detector with acoustic alarm and output relay
The IMQ certification in accordance to the standards CEI EN50194 guarantees the quality of these gas detectors.
In presence of gas concentrations, the alarm lights up and emits a loud signal, and thanks to the output relay it is possible to manage the closing of the solenoid gas valve.
4
gas electro-valves n.c. 6 bar dimensions from 1/2" to 2"
Gas solenoid valves are designed to be combined with any gas detection system, that allow shutting off of the main outlet when an emergency situation is detected.
The solenoid valves are installed on the gas piping and attached with a gas detector. They interrupt the gas flow in an emergency situation.
The electro-valve is generally connected behind a filter, upstream of the regulation apparatus and preferably outside the measurement zone. It should be installed with the arrow facing the user. To reset the solenoid valve, check that the coil is receiving current and pull the reset knob after having unscrewed the protection cap, and screw it back in when the operation is finished.
standard specification
• Power supply: 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca
• Body: brass, painted
• Working temperature: -15°C / +70°C
• Closing time: < 1 sec
• Max pressure: 6 bar
• Protection level: IP65
• Connections: ISO 228/1 thread
gas solenoid valve
5
contact
Europump International® is a worldwide network with a presence in many regions of the world, helping us serve our customers as efficiently as possible. For more information, feel free to contact any of our offices from the following regions:
EUROPUMP ITALIA SRL Via Georges Bizet 36G 20092
Cinisello Balsamo (MI) ITALY
Tel: +39 02 612 99144 Fax: +39 02 407 05784 [email protected]
EUROPUMP AKY. LPG PMP SAN SAT PAZ LTD Ist. Mermerciler San. Sit.18. Cad. 22. Sok. No:32
Dilovasi KocaeliTURKEY
Tel: +90 216 365 35 70 Fax: +90 216 365 35 72
EUROPUMP POLSKA SPÓŁKA Z. O. O. 86-300 Grudziądz ul. Rapackiego 37
POLAND
Tel: +48 56 64 11 666 Fax: + 48 56 64 11 665