9515 SOUTH 670 WEST SANDY, UT 84070

INTRODUCING

www.highdesertsales.net

9515 SOUTH 670 WEST SANDY, UT 84070

Our mission is to bring to the High Desert Region a full line of mechanical products and services that represent the state-of-the-art in the industry. High Desert Sales will continue to seek out industry leading products, services and personnel to bring these solutions to market.

Led by two proven industry veterans, Rick Miller and Larry Putman, High Desert Sales' management team represents over 48 years of collective experience in the heating and cooling business. The HDS team has a proven history of sales in the intermountain area and strong technical expertise in HVAC, boilers, pumps and system applications. This expertise extends into radiant heating applications, snow melt and replacement parts.

Serviced from our warehouse in Sandy Utah, HDS stocks critical products, parts and components to insure your systems can be up and running in the shortest time possible.

Our service area includes all of Utah, Southern Idaho, Western Wyoming and Eastern Nevada. Representing the best products our industry has to offer, with proven and knowledgeable employees and backing it all up with superior customer service is the mission of High Desert Sales.

About Us

High Efficiency Cooling Towers

Package boilers, Scotch Marine, and Firebox boilers

Brazed plate heat exchangers

Plate & Frame, vertical JAD heat exchangers

Air separators, flow diverters, expansion tanks

Manufacturer of pumps, tanks, heat exchangers,

skid mount packages and accessories

HVAC Coils, Industrial Coils, air handling units

High efficiency water heaters, boilers, and pool heaters

Governor line pressure regulators

•Up to 87% Thermal Efficiency•500,000 - 2,000,000 Btr/Hr. •Infinite Modulation (2:1 or 5:1 Firing Turndown)•SMART SYSTEM Control•Heavy Duty, Gasketless Heat Exchanger•Multiple Venting Solutions including Direct Vent •Category I,II or IV Venting •Low Inlet Gas Pressure Operation

•81% Thermal Efficiency y•495,000 - 2,065,000 Btu/Hr •Heavy Duty, Gasketless Heat Exchanger•Smaller Vent Diameters •Fits Through Standard 36" Doorway •Advanced Control System with Diagnostic Lights

•Up to 94.6% Thermal Efficiency •399,000 - 800,000 Btu/Hr •Smart System Control •Internal Cascade Sequencer •PVC or Stainless Steel Vent - up to 100 ft •Condensing Stainless Steel Heat Exchanger •Fully Modulating Burner w/ 5:1 Turndown

•Up to 97 % Thermal Efficiency•1.5, 1.7 & 2.0 MBH •25 - 100% Infinitely Proportional•Gas & Water Supply Flexibility•Multiple Venting Solutions •Advanced Burner Design •LonWorks® Compatible

Fully Condensing, Fully Modulating, High Efficiency Boiler – up to 98% Thermal Efficiency

Extreme Design Flexibility Contractor and Customer

Friendly

Better Idea – Split System

Tank Type

Residential

Water Heaters

SMART CONTROL

TECHNOLOGY

HIGH EFFICIENCY 96% CONDENSING 316L STAINLESS HEAT-EXCHANGER

ASHRAE CERTIFIED GLASS LINED VOLUME TANK

• Up to 96% Thermal Efficiency

• 5 Models to Choose From

• 150,000 to 500,000 Btu/Hr

- SHR150-100

- SHR200-100

- SHA285-125

- SHA400-125

- SHA500-125

98% Thermal Efficiency Modulating Firing Rate 20-

100% Direct Vent in PVC 100’ 33 Degree Entering Water

7 Day Time Clock On Board

Sequencer Pump Delay

Control Zero Clearance to

Combustibles

Compact Commercial Electric •Heavy Duty Steel Boiler Vessel Housing •15 - 480 kW Input •4" Fiberglass Insulation •Digital Temperature Readout

Lock-Temp® Bare •80% Draw Factor •Lock-Temp Baffle•Horizontal or Vertical Configuration •Standard Durable Fused Glass Lining•ASME Construction

Lock-Temp® Round Jacketed •80% Draw Factor •80 - 1000 Gallon Capacities •Lock-Temp Baffle•Horizontal & Vertical Configuration •Standard Durable Fused Glass Lining•ASME Construction•Energy Saving Performance

•89% Thermal Efficiency•500,000 - 2,070,000 Btu/Hr •Heavy Duty, Gasketless Heat Exchanger •Indoor or Outdoor Installation •Aire-Lock Direct Vent•Standard Pumped Bypass •Referenced Gas Valves•New Operator Interface with Electronic Controls

The FLO FAB product line, created and developed by Denis Gauvreau and constantly being perfected by Marc Gauvreau, Michelle Gauvreau as well as by a team of professional engineers and designers, is a combination of existing concepts from several renown products, and the innovative ideas of a new generation.

Manufacturer of pumps, tanks, heat exchangers, skid mount packages and accessories

Flo Fab Vertical Inline PumpsSeries 880RI:

Flo Fab Closed Coupled Pumps

Flo Fab Base-mounted Pumps

single suction, base-mounted 1.5 x 1.5-8 to 12 x 10-17

16 different configurations• Suction

• Discharge

• Motor

• Coupling

• Shaft

• Power Frame

• Bracket

SERIES 6000: FLO FAB BASE-MOUNTED PUMPS

FLO FAB SUBMERSIBLE PUMPS:

Sewage Effluent Grinder Column Accessories

DUPLEX BOILER PACK

EASCO Boiler Corp. is a premier steel boiler manufacturer in the United States. Utilizing this platform, EASCO provides Steel, 3-Pass, Waterbacked, Firetube Packaged Boiler Assemblies constructed in accordance with ASME Section IV, Low Pressure Steam (15 PSIG) and Water (160 PSIG/250F) and Section I (to 300 PSIG) available as both Field Erected and Factory Fabricated.

NEW SERIES SM5 BOILERS

DESIGNED TO FIT THROUGH A STANDARD 36 IN. WIDE DOORWAY.

Hot Water Coils (HW) and Chilled Water Cooling Coils (CW)Available in same or opposite end designs with a multitude of circuitry available. Coils constructed of 3/8", 1/2", and 5/8" O.D. tubes with aluminum or copper fins and galvanized or stainless steel casings.

Standard Steam Heating Coil (SS)Available with opposite end or same end connections. Standard coil construction good up to 100 PSIG steam pressure. Coils can be fabricated in 1 row or 2 row designs with 5/8" O.D. copper tubes.

Horizontal LargeFan/Coils600 thru 2200 CFM

Fluid CoolersDry Coolers

Central StationAir HandlersIndoor & Outdoor Belt Drive Air

Handlers 2 Thru 30 Tons

Tower Tech is the home of the revolutionary high efficiency cooling tower.  Since 1992 our patented Modular Cooling Tower™ has been specified by a thousand discerning users who demanded the highest in efficiency and the greatest reliability and built-in redundancy.  

GEA FlatPlate Systems offers a comprehensive range of products supporting virtually any heat exchanger application.

GEA FlatPlate's MP Series is designed specifically for multi-purpose Marine and Swimming Pool applications, where chlorine, salt, biological elements or low concentrations of acids are present. The MP Series is rugged, yet very compact, representing the latest technology in marine duty plate heat exchangers.

The FP Series is designed for a wide variety of fluid to fluid applications requiring exacting heat transfer performance.

CSA certified (Z21.80) for 2 psi inlet pressure, outlet pressure range of 4  inches w.c.to 2 PSIG outlet. The 2 psi inlet CSA approved Governor allows for vent free*, multi position installation for ½ through 2”.  The Governor also features double diaphragm, integral vent limiter with balanced valve design to provide increased capacity and accuracy.   Standard models up to 4” pipe size. Up to 7 psig inlet pressure and 2 psig outlet pressure. Integral slam-shut valves and filters are available

-Double Diaphragm-Balanced Valve-High Capacity-Strait-through or Angle Connections-Wide Size Range-Integral Pressure Test Points-Integral Filter (Optional)-Integral Slam Shut (Optional)

With more than 30 years experience, Wheatley brand products have established a reputation for providing dependable products to the HVAC industry. The Plugaroo/TDV™ is an industry standard. In addition to our complete line of tanks, strainers and valve products, we are committed to bringing you the latest in HVAC technology from all over the world. This commitment is your assurance of receiving the best products the industry has to offer.

THANK YOU