www.smthelp.com

SM-1068-LED Semi-automatic high-precision solder paste printer

www.smthelp.com

1. Adopt TaiWan CSK rails and Taiwan and Taiwan speed motor to drive the Scraper seat to ensure printing precision.2. Printing scraper can be rotated 45 degrees and fixed up, so it is easy the user to clean and replace printing stencil and squeegee. 3. Scraper seat can be adjusted back and forth, to select the appropriate printing position.4. With fixed platen printing groove and PIN, combined printing tablet is easy to install and adjust, suitable for single and double-side printing.

5. The board calibration adopts moving stencil and referring X, Y, Z coordinate or the PCB. Easy calibration and trimming.

6. Adopt Mitsubishi PLC + touch screen display. It is simple, convenient and more suitable for human-Computer interaction.

7. Can be set to one-way and two-way, a variety way of printing.

8.The scraper angle is adjustable. Both steel scraper and rubber scraper are suitable.

9.The man-machine interface has a screen saver function and can protect the life of the man-machine interface.

10. Adopt unique program designed to make printing squeegee seat adjustable easily.

Characteristic

www.smthelp.com

Printing table area 320×1270mm

Frame dimensions 370×1500mm ，

Board size 250×1200mm

Scraper speed 0-100mm/sec

Board thickness 0 ． 2-2 ． 0mm

Printing position fixing PCB Outer Or Pin Positioning

Platen trimming Front ／ back ±10mm R ／ L ±10mm

Printing precision ±0 ． 02mm

Machine repeat printing precision ±0 ． 02mm

Minimum spacing 0 ． 35mm

Air pressure used 4-6kgf ／ cm2

Power supply 220V ， 50 ／ 60Hz ， 100W

Machine dimension L1650×W900×Hl650mm

Machine weight (about)450kgs

SM-1068-LED Semi-automatic printer parameters

www.smthelp.com

SMT Feeder Table

＊ Board width ： 50 ～ 350 adjustable

＊ Feeder tablet length ： 1400mm

＊ Transport height ： 900mm ± 20mm

＊ Lighthouse adopts refined tube, beautiful and durable

＊ Rail adopts SMT feeder table customized rail

＊ Twin screw width adjustment mechanism, easy to operate

＊ Transportation adopts professional wear-resistant green belts. Pulleys are band-edge wheel. Smooth transmission.

＊ Motivated by Taiwan 15W small gear motor with speed governor＊ With a single 18W T4 energy-saving lamps with cover

＊ Process card holder adopts H-shaped frame with special aluminum material with A4 process card

＊ Unilateral table, tablet surface is mounted with 2mm green anti-static rubber, the effective tablet width is 200mm.

www.smthelp.com

Solder Paste Mixer

Characteristic：

1， Adopt revolution and rotation mixing method, the mixer can effectively makes the solid tin and liquid tin more stir in order to achieve good printing and reflow effect, at the same time eliminating the manpower and make the operation more standardized.

2，Machine mixing can avoid the tin paste expose to the air and avoid the tin paste absorbs water from moisture air, therefore, avoid the product defective rate.

3，Mixer function: meet ISO-9000 solder paste mixer requirement

4， Adopt DH48S-1Z time controller, easy to operate, good compatibility

5，Multiple levels of security guarantee to ensure safty operation.

6，Working speed： 450RPM

7，Working ability： 500g two bottles at one time

8，Mix time： Can be set accordingly

9，Working voltage： AC220V。

10， Size： 450×450×480mm

www.smthelp.com

Smiller HeMP:+8613530590727Skype:veyho735Email:hewei@smthelp.comwww.smthelp.comcn.linkedin.com/in/smtsalesservicewww.facebook.com/automaticinsertion

www.smthelp.com

Smiller HeMP:+8613530590727Skype:veyho735Email:hewei@smthelp.comwww.smthelp.comcn.linkedin.com/in/smtsalesservicewww.facebook.com/automaticinsertion