Upload
lyanh
View
218
Download
4
Embed Size (px)
Citation preview
Horizontal trailed mixer-feeders
SGARIBOLDI S.r.l.
Via Pietro Nenni 15 | 26845 Codogno - Lodi (Italy) | Tel. (+39) 0377 430 405 | Fax (+39) 0377 430 415 | [email protected]
sgariboldi.it
05.201
5
MONOFEEDER®
OVER 50 YEARSEXPERIENCEThe push toward innovation led Sgariboldi to buildthe first diet-feeder in 1969. Today Sgariboldi designs and produces technologicallyadvanced mixer-feeders which are appreciatedandused all around the world.
An experience that has meant::
• specific know-how in zootechnics • professional customer care and services
1969
3 EXCLUSIVEMIXING SYSTEMS
CUSTOM MADEMACHINES CREATED UPON REQUEST
Expertise born from the experience we have gainedin the most varied climatic conditions, which is able to provide the most effective solutions that are tailored to the breeder’s specific needs.
Modular systems: the machine’s height, widthand steering angle can be designed upon singleclient request.
Great volumeswith compact size
Fully hydrostaticsystem
Fresh and soft feed, with no friction
in the tank
Top levelcomponents
Hor
izonta
l s
ingle auger
Twin f ow system
MONOFEEDER®
HORIZONTALTECHNOLOGY
TMR-UNIFEEDOPTIMUM AND GUARANTEED PHMonofeeder® mixing has been certified in time by various and distinguished Institutes throughout the world.
• Fibrous products compliance and clean cut • Maximum uniformity of the various components
of the ration (proteins - carbohydrates - fibres) • Animal health and well-being guaranteed
by accurate studies
INNOVATIONAND EFFICIENCYMachines with an innovative functional design.The Monofeeder® models offer a system that combines fowing movement and high performance.
The patented Monofeeder® mixer-feeder has marked the birth of a new generation of machines, guaranteeing maximum performance and considerable cost reduction. It is not by chance that it has been a preference for more than twenty years, and has been used by thousands of breeders with the most varied needs.
CUTSAND MIXES
MAXIMUM SUSTAINABILITY
performancereliabilityefficiency production
wastetimemechanical effortconsumption
Uniformand precise ration
discharge
Stainless steelcoatings and Hardox
bottoms*
Once the last ingredient has been loaded, the mix can be handed out to the animals. The single meal is a soft and homogenous mix cut just right.
• Excellent “Fodder Value” (compared to the siloed products’ structure)
• No overheating of the final product. In each phase of the mixing, the product is never pushed or pressed against the walls
• Maximum desirability and rumination. The fresh product, with its respected fibres, increases the bovine’s appetite and the speed in which the feed moves towards the rumen
Completelyhydrostatic auger transmission
Fast mixingquality mix
Twin fow System
I vantaggi del defettoreBolted counter
knivesWith an especially
designed arrangement according to the various
types of ingredients
MONOFEEDER®
TECHNOLOGYA perfect abridgement of innovation.
This advanced mixing system, with a single horizontal auger, provides for maximum operative dependability, also featuring the most compact size on the market.Patented technology.
A double flow to speed-up work.
The auger, with its counterposed spirals, forces a dynamic twin fow upon the materials, from the front and rear partof the machine towards the centre of the tank.
• The SG setup (optional), the best for mixing without cutting, is able to perfectly homogenise the pre-cut products
• The RC setup (optional), a patented baling kit, is capable of splitting apart bales of all sizes, diameter and compactness, though still preserving the product’s structure
The advantages of the defectorInside the tank, the exclusive screening arm:
• reduces mixing time • allows effective material flow • eliminates stasis points
+ meat+ milk
One auger, one adaptor, one hydraulic motor. The advantages:
• less wear and tear • less consumption • less maintenance costs • less environmental impact
* Available upon request.
MONOFEEDER® STSIMPLE AND RELIABLE
MONOFEEDER® DFVERSATILE AND EFFICIENT
• Available from 7 to 26 m3
• Ideal for driving in most confined spaces
• Also available as stationary workstation powered by electric motor or diesel engine
• Available from 7 to 22 m3
• Self-loading system, two machines in one
• Double self-contained hydraulic system
OURRANGE
CUTTINGSYSTEM
Loading drum
The careful design of the shape of the drum,the relevant housing and the layout of the knives, together with the very high power, make it possibleto load perfectly any product. This guaranteesa smooth and uniform clamp face, thus preventing itto go mouldy.
Rear shield
The duly shaped hydraulic shield makes it possibleto collect the products down to the bottom and obtain a perfect cleaning of the ground.
Protection system
The rear auger protection device, which makes it possible to keep it always rotating (technical innovation award at EIMA 2001 show), is a sliding wall that rises with the progressive lifting of the loading arms, thus making any accidental contact with the mixing auger impossible while still allowing the optimal loading of the products.
0908070604 0503
Road version*
Available with electric motor or dieselengine and in stationary workstation*
Adjustable weighing indicator*
Electro-hydraulic remote controls*
01
04
03
02
05
06
07
* Available upon request.
Fully customised and both side discharge*
Pneumatic brakes*
Magnet at the discharge*
Modular systemsThe machine’s height, width
and steering angle can be designedupon single client request
0201
08
09Easy change - safe knife replacement system*
Special hopper for salts and minerals*
CUSTOM MADEMACHINES MADE UPON REQUESTThe machine’s height, width and steering angle are designed according to the customer’s request: each working need, even the most difficult to carry out,is examined by an experienced and qualifiedtechnical staff.
The project is realised in a unique and original solution the customer can rely on, with a noteworthy contribution to the quality of his/her work.
The bestperforming
solution
A custom made machine
7 ST 11 ST 14 ST 17 ST 17 ST PLUS 20 STPLUS
22 STPLUS
26 STPLUS
Volume m3 7 11 14 17 17 20 22 26
Length mm 5600 6200 6400 6700 6700 6900 7300 7300
Width mm 1900 2000 2300 2300 2300 2550 2550 2750
Standard Height mm 2200 2450 2650 2750 2750 2950 2950 3300
Wheels 10.0/75-15.3 285/70-19.5 15-22.5 15-22.5 15-22.5 15-22.5 15-22.5 18-22.5
External Wheel Track mm 1700 1850 2200 2200 2200 2450 2450 2700
Auger Diameter mm 670 770 870 870 960 1060 1060 1160
Discharge Width mm 800 800 800 800 1000 1000 1000 1000
Discharge Height mm 500 500 600 600 600 700 800 800
Required Power KW / HP 37/50 44/60 59/80 67/90 67/90 73/100 81/110 88/120
Weight kg 2400 3100 4000 4500 4500 5300 6000 8000
MACHINE EQUIPMENT
Adjustable drawbar • • • • • • • •Chain Driven Left Side Discharge • • • • • • • •Auger Inverter • • • • •Control Cables • • • • • • • •Mechanical Hand Brake • • • • • • • •Independent Hydraulic System • • • • • • • •Mechanical ‘supporting foot’ • • • • • • • •Hydraulic ‘supporting foot’
Electronic Weighing System • • • • • • • •Shaft Drive Hydraulic Discharge Lifting • • • • • • • •SG Version (only Mixer)
RC Version (with Baling kit)
Versione RC con kit rotoballe
7 DF 11 DF 14 DF 17 DF 17 DF PLUS 20 DF PLUS 22 DF PLUS
Volume m3 7 11 14 17 17 20 22
Length mm 6400 7000 7200 7500 7500 7700 8200
Width mm 1950 2050 2350 2350 2350 2600 2600
Standard Height mm 2200 2450 2650 2750 2750 2950 2950
Wheels 10.0/75-15.3 285/70-19.5 15-22.5 15-22.5 15-22.5 15-22.5 15-22.5
External Wheel Track mm 1700 1850 2200 2200 2200 2450 2450
Auger Diameter mm 670 770 870 870 960 1060 1060
Discharge Width mm 800 800 800 800 1000 1000 1000
Discharge Height mm 500 500 600 600 600 700 800
Loading drum Width mm 1650 1650 1650 2050 2050 2050 2050
Required Power KW / HP 44/60 59/80 67/90 73/100 73/100 81/110 88/120
Weight kg 3300 4100 5000 5500 5500 6500 7000
MACHINE EQUIPMENT
Adjustable drawbar • • • • • • •Chain Driven Left Side Discharge • • • • • • •Auger Inverter • • • •Control Cables • • • • • • •Mechanical Hand Brake • • • • • • •Independent Hydraulic System • • • • • • •Mechanical ‘supporting foot’ • • • • • • •Hydraulic ‘supporting foot’
Electronic Weighing System • • • • • • •Shaft Drive • • • • • • •Double rotation Loading drum • • • • • • •Automatic ‘de-fooding’ valve • • • • • • •Anti-injury rear protection • • • • • • •Hydraulic Discharge Lifting
SG Version (only Mixer)
RC Version (with Baling kit)
MONOFEEDER® ST
MONOFEEDER® DF
The data and technical specs in the chart can vary depending on the accessories the machine features.The Company can modify the data, should it deem it necessary, at any time and with no prior notice.
Legend: • STANDARD | UPON REQUEST
COMPETENCEAT CUSTOMER’S SERVICEOur commitment is that of making machines that are always more reliableand to offer the best service in time.
TESTING
Each machine is tested for fowing withinthe hydraulic system. Other thorough testsare also carried out.
AFTER SALE SERVICE
Sgariboldi guarantees after-sale supportwith a qualified and multi-language staff.
SPARE PARTS
A large and well stocked warehouse providesoriginal spare parts that meet the highestproduction standards.
TRAINED TECHNICAL PERSONNEL
Internal and external technical staff is constantly trained by the parent company, in order to guarantee prompt and effective technical support service.