Ais Romney 2006 Slides 06 Control And Ais Part 1

© 2006 Prentice Hall Business Publishing Accounting Information Systems, 10/e Romney/Steinbart 1 of 314

C HAPTER 6

Control and Accounting Information Systems


INTRODUCTION

• Questions to be addressed in this chapter:– What are the basic internal control concepts, and why are

computer control and security important?– What is the difference between the COBIT, COSO, and ERM

control frameworks?– What are the major elements in the internal environment of a

company?– What are the four types of control objectives that companies

need to set?– What events affect uncertainty, and how can they be identified?– How is the Enterprise Risk Management model used to assess

and respond to risk?– What control activities are commonly used in companies?– How do organizations communicate information and monitor

control processes?


INTRODUCTION

• Why AIS Threats Are Increasing– Control risks have increased in the last few years

because:• There are computers and servers everywhere, and

information is available to an unprecedented number of workers.

• Distributed computer networks make data available to many users, and these networks are harder to control than centralized mainframe systems.

• Wide area networks are giving customers and suppliers access to each other’s systems and data, making confidentiality a major concern.


INTRODUCTION

• Historically, many organizations have not adequately protected their data due to one or more of the following reasons:– Computer control problems are often underestimated and

downplayed.– Control implications of moving from centralized, host-based

computer systems to those of a networked system or Internet-based system are not always fully understood.

– Companies have not realized that data is a strategic resource and that data security must be a strategic requirement.

– Productivity and cost pressures may motivate management to forego time-consuming control measures.


INTRODUCTION

• Some vocabulary terms for this chapter:– A threat is any potential adverse occurrence

or unwanted event that could injure the AIS or the organization.

– The exposure or impact of the threat is the potential dollar loss that would occur if the threat becomes a reality.

– The likelihood is the probability that the threat will occur.


INTRODUCTION

• Control and Security are Important– Companies are now recognizing the problems and

taking positive steps to achieve better control, including:

• Devoting full-time staff to security and control concerns.• Educating employees about control measures.• Establishing and enforcing formal information security

policies.• Making controls a part of the applications development

process.• Moving sensitive data to more secure environments.


INTRODUCTION

• To use IT in achieving control objectives, accountants must:– Understand how to protect systems from

threats.– Have a good understanding of IT and its

capabilities and risks.

• Achieving adequate security and control over the information resources of an organization should be a top management priority.


INTRODUCTION

• Control objectives are the same regardless of the data processing method, but a computer-based AIS requires different internal control policies and procedures because:– Computer processing may reduce clerical errors but

increase risks of unauthorized access or modification of data files.

– Segregation of duties must be achieved differently in an AIS.

– Computers provide opportunities for enhancement of some internal controls.


INTRODUCTION

• One of the primary objectives of an AIS is to control a business organization.– Accountants must help by designing effective control

systems and auditing or reviewing control systems already in place to ensure their effectiveness.

• Management expects accountants to be control consultants by:– Taking a proactive approach to eliminating system

threats; and– Detecting, correcting, and recovering from threats

when they do occur.


INTRODUCTION

• It is much easier to build controls into a system during the initial stage than to add them after the fact.

• Consequently, accountants and control experts should be members of the teams that develop or modify information systems.


OVERVIEW OF CONTROL CONCEPTS

• In today’s dynamic business environment, companies must react quickly to changing conditions and markets, including steps to:– Hire creative and innovative employees.– Give these employees power and flexibility to:

• Satisfy changing customer demands;• Pursue new opportunities to add value to the organization;

and• Implement process improvements.

• At the same time, the company needs control systems so they are not exposed to excessive risks or behaviors that could harm their reputation for honesty and integrity.



• Internal control is the process implemented by the board of directors, management, and those under their direction to provide reasonable assurance that the following control objectives are achieved:– Assets (including data) are safeguarded.

• This objective includes prevention or timely detection of unauthorized acquisition, use, or disposal of material company assets.



• Internal control is the process implemented by the board of directors, management, and those under their direction to provide reasonable assurance that the following control objectives are achieved:– Assets (including data) are safeguarded.– Records are maintained in sufficient detail to accurately and

fairly reflect company assets.




fairly reflect company assets. – Accurate and reliable information is provided.




fairly reflect company assets. – Accurate and reliable information is provided.– There is reasonable assurance that financial reports are

prepared in accordance with GAAP.





prepared in accordance with GAAP.– Operational efficiency is promoted and improved.

• This objective includes ensuring that company receipts and expenditures are made in accordance with management and directors’ authorizations.





prepared in accordance with GAAP.– Operational efficiency is promoted and improved.– Adherence to prescribed managerial policies is encouraged.





prepared in accordance with GAAP.– Operational efficiency is promoted and improved.– Adherence to prescribed managerial policies is encouraged.– The organization complies with applicable laws and

regulations.



• Internal control is a process because:– It permeates an organization’s operating activities.– It is an integral part of basic management activities.

• Internal control provides reasonable, rather than absolute, assurance, because complete assurance is difficult or impossible to achieve and prohibitively expensive.



• Internal control systems have inherent limitations, including:– They are susceptible to errors and poor decisions.– They can be overridden by management or by

collusion of two or more employees.

• Internal control objectives are often at odds with each other.– EXAMPLE: Controls to safeguard assets may also

reduce operational efficiency.



• Internal controls perform three important functions:– Preventive controls

• Deter problems before they arise.



• Internal controls perform three important functions:– Preventive controls– Detective controls

• Discover problems quickly when they do arise.



• Internal controls perform three important functions:– Preventive controls– Detective controls– Corrective controls

• Remedy problems that have occurred by:– Identifying the cause;– Correcting the resulting errors; and– Modifying the system to prevent future

problems of this sort.



• Internal controls are often classified as:– General controls

• Those designed to make sure an organization’s control environment is stable and well managed.

• They apply to all sizes and types of systems.• Examples: Security management controls.



• Internal controls are often classified as:– General controls– Application controls

• Prevent, detect, and correct transaction errors and fraud.

• Are concerned with accuracy, completeness, validity, and authorization of the data captured, entered into the system, processed, stored, transmitted to other systems, and reported.



• An effective system of internal controls should exist in all organizations to:– Help them achieve their missions and goals– Minimize surprises


CONTROL FRAMEWORKS

• A number of frameworks have been developed to help companies develop good internal control systems. Three of the most important are:– The COBIT framework

– The COSO internal control framework

– COSO’s Enterprise Risk Management framework (ERM)


CONTROL FRAMEWORKS





CONTROL FRAMEWORKS

• COBIT Framework– Also know as the Control Objectives for

Information and Related Technology framework.

– Developed by the Information Systems Audit and Control Foundation (ISACF).

– A framework of generally applicable information systems security and control practices for IT control.


CONTROL FRAMEWORKS

• The COBIT framework allows:– Management to benchmark security and

control practices of IT environments.– Users of IT services to be assured that

adequate security and control exists.– Auditors to substantiate their opinions on

internal control and advise on IT security and control matters.


CONTROL FRAMEWORKS

• The framework addresses the issue of control from three vantage points or dimensions:– Business objectives

• To satisfy business objectives, information must conform to certain criteria referred to as “business requirements for information.”

• The criteria are divided into seven distinct yet overlapping categories that map into COSO objectives:– Effectiveness (relevant,

pertinent, and timely)– Efficiency– Confidentiality– Integrity– Availability– Compliance with legal

requirements– Reliability


CONTROL FRAMEWORKS

• The framework addresses the issue of control from three vantage points or dimensions:– Business objectives– IT resources • Includes:

• People

• Application systems

• Technology

• Facilities

• Data


CONTROL FRAMEWORKS

• The framework addresses the issue of control from three vantage points or dimensions:– Business objectives– IT resources– IT processes • Broken into four domains

– Planning and organization– Acquisition and implementation– Delivery and support– Monitoring


CONTROL FRAMEWORKS

• COBIT consolidates standards from 36 different sources into a single framework.

• It is having a big impact on the IS profession.– Helps managers to learn how to balance risk and

control investment in an IS environment.– Provides users with greater assurance that security

and IT controls provided by internal and third parties are adequate.

– Guides auditors as they substantiate their opinions and provide advice to management on internal controls.


CONTROL FRAMEWORKS





CONTROL FRAMEWORKS

• COSO’s Internal Control Framework– The Committee of Sponsoring Organizations

(COSO) is a private sector group consisting of:

• The American Accounting Association• The AICPA• The Institute of Internal Auditors• The Institute of Management Accountants• The Financial Executives Institute


CONTROL FRAMEWORKS

• In 1992, COSO issued the Internal Control Integrated Framework:– Defines internal controls.– Provides guidance for evaluating and

enhancing internal control systems.– Widely accepted as the authority on internal

controls.– Incorporated into policies, rules, and

regulations used to control business activities.


CONTROL FRAMEWORKS

• COSO’s internal control model has five crucial components:- Control environment

• The core of any business is its people.• Their integrity, ethical values, and competence make

up the foundation on which everything else rests.


CONTROL FRAMEWORKS

• COSO’s internal control model has five crucial components:- Control environment- Control activities

• Policies and procedures must be established and executed to ensure that actions identified by management as necessary to address risks are, in fact, carried out.


CONTROL FRAMEWORKS

• COSO’s internal control model has five crucial components:- Control environment- Control activities- Risk assessment

• The organization must be aware of and deal with the risks it faces.

• It must set objectives for its diverse activities and establish mechanisms to identify, analyze, and manage the related risks.


CONTROL FRAMEWORKS

• COSO’s internal control model has five crucial components:- Control environment- Control activities- Risk assessment- Information and communication

• Information and communications systems surround the control activities.

• They enable the organization’s people to capture and exchange information needed to conduct, manage, and control its operations.


CONTROL FRAMEWORKS

• COSO’s internal control model has five crucial components:- Control environment- Control activities- Risk assessment- Information and communication- Monitoring

• The entire process must be monitored and modified as necessary.


CONTROL FRAMEWORKS





CONTROL FRAMEWORKS

• Nine years after COSO issued the preceding framework, it began investigating how to effectively identify, assess, and manage risk so organizations could improve the risk management process.

• Result: Enterprise Risk Manage Integrated Framework (ERM)– An enhanced corporate governance document.– Expands on elements of preceding framework.– Provides a focus on the broader subject of enterprise

risk management.


CONTROL FRAMEWORKS

• Intent of ERM is to achieve all goals of the internal control framework and help the organization:– Provide reasonable assurance that company

objectives and goals are achieved and problems and surprises are minimized.

– Achieve its financial and performance targets.– Assess risks continuously and identify steps to take

and resources to allocate to overcome or mitigate risk.

– Avoid adverse publicity and damage to the entity’s reputation.


CONTROL FRAMEWORKS

• ERM defines risk management as:– A process effected by an entity’s board of

directors, management, and other personnel– Applied in strategy setting and across the

enterprise– To identify potential events that may affect the

entity– And manage risk to be within its risk appetite– In order to provide reasonable assurance of

the achievement of entity objectives.


CONTROL FRAMEWORKS

• Basic principles behind ERM:– Companies are formed to create value for

owners.– Management must decide how much

uncertainty they will accept.– Uncertainty can result in:

• Risk• The possibility that something will happen to:

– Adversely affect the ability to create value; or– Erode existing value.


CONTROL FRAMEWORKS

• Basic principles behind ERM:– Companies are formed to create value for

owners.– Management must decide how much

uncertainty they will accept.– Uncertainty can result in:

• Risk• Opportunity

• The possibility that something will happen to positively affect the ability to create or preserve value.


CONTROL FRAMEWORKS

– The framework should help management manage uncertainty and its associated risk to build and preserve value.

– To maximize value, a company must balance its growth and return objectives and risks with efficient and effective use of company resources.


CONTROL FRAMEWORKS

• COSO developed a model to illustrate the elements of ERM.


CONTROL FRAMEWORKS

• Columns at the top represent the four types of objectives that management must meet to achieve company goals.– Strategic objectives

• Strategic objectives are high-level goals that are aligned with and support the company’s mission.


CONTROL FRAMEWORKS

• Columns at the top represent the four types of objectives that management must meet to achieve company goals.– Strategic objectives – Operations objectives

• Operations objectives deal with effectiveness and efficiency of company operations, such as:– Performance and

profitability goals– Safeguarding assets


CONTROL FRAMEWORKS

• Columns at the top represent the four types of objectives that management must meet to achieve company goals.– Strategic objectives – Operations objectives– Reporting objectives

• Reporting objectives help ensure the accuracy, completeness, and reliability of internal and external company reports of both a financial and non-financial nature.

• Improve decision-making and monitor company activities and performance more efficiently.


CONTROL FRAMEWORKS

• Columns at the top represent the four types of objectives that management must meet to achieve company goals.– Strategic objectives – Operations objectives– Reporting objectives– Compliance objectives

• Compliance objectives help the company comply with applicable laws and regulations.– External parties often set

the compliance rules.– Companies in the same

industry often have similar concerns in this area.


CONTROL FRAMEWORKS

• ERM can provide reasonable assurance that reporting and compliance objectives will be achieved because companies have control over them.

• However, strategic and operations objectives are sometimes at the mercy of external events that the company can’t control.

• Therefore, in these areas, the only reasonable assurance the ERM can provide is that management and directors are informed on a timely basis of the progress the company is making in achieving them.


CONTROL FRAMEWORKS

• Columns on the right represent the company’s units:– Entire company


CONTROL FRAMEWORKS

• Columns on the right represent the company’s units:– Entire company– Division


CONTROL FRAMEWORKS

• Columns on the right represent the company’s units:– Entire company– Division– Business unit


CONTROL FRAMEWORKS

• Columns on the right represent the company’s units:– Entire company– Division– Business unit– Subsidiary


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment

• The tone or culture of the company.

• Provides discipline and structure and is the foundation for all other components.

• Essentially the same as control environment in the COSO internal control framework.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting

• Ensures that management implements a process to formulate strategic, operations, reporting, and compliance objectives that support the company’s mission and are consistent with the company’s tolerance for risk.

• Strategic objectives are set first as a foundation for the other three.• The objectives provide guidance to companies as they identify risk-

creating events and assess and respond to those risks.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification

• Requires management to identify events that may affect the company’s ability to implement its strategy and achieve its objectives.

• Management must then determine whether these events represent:– Risks (negative-impact events requiring assessment and

response); or– Opportunities (positive-impact events that influence strategy and

objective-setting processes).


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification– Risk assessment

• Identified risks are assessed to determine how to manage them and how they affect the company’s ability to achieve its objectives.

• Qualitative and quantitative methods are used to assess risks individually and by category in terms of:– Likelihood– Positive and negative

impact– Effect on other

organizational units• Risks are analyzed on an

inherent and a residual basis.• Corresponds to the risk

assessment element in COSO’s internal control framework.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification– Risk assessment– Risk response

• Management aligns identified risks with the company’s tolerance for risk by choosing to:– Avoid– Reduce– Share– Accept

• Management takes an entity-wide or portfolio view of risks in assessing the likelihood of the risks, their potential impact, and costs-benefits of alternate responses.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification– Risk assessment– Risk response– Control activities

• To implement management’s risk responses, control policies and procedures are established and implemented throughout the various levels and functions of the organization.

• Corresponds to the control activities element in the COSO internal control framework.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification– Risk assessment– Risk response– Control activities– Information and

communication

• Information about the company and ERM components must be identified, captured, and communicated so employees can fulfill their responsibilities.

• Information must be able to flow through all levels and functions in the company as well as flowing to and from external parties.

• Employees should understand their role and importance in ERM and how these responsibilities relate to those of others.

• Has a corresponding element in the COSO internal control framework.


CONTROL FRAMEWORKS

• The horizontal rows are eight related risk and control components, including:– Internal environment– Objective setting– Event identification– Risk assessment– Risk response– Control activities– Information and

communication– Monitoring

• ERM processes must be monitored on an ongoing basis and modified as needed.

• Accomplished with ongoing management activities and separate evaluations.

• Deficiencies are reported to management.

• Corresponding module in COSO internal control framework.


CONTROL FRAMEWORKS

• The ERM model is three-dimensional.

• Means that each of the eight risk and control elements are applied to the four objectives in the entire company and/or one of its subunits.


CONTROL FRAMEWORKS

• ERM Framework Vs. the Internal Control Framework– The internal control framework has been

widely adopted as the principal way to evaluate internal controls as required by SOX. However, there are issues with it.

• It has too narrow of a focus.

• Examining controls without first examining purposes and risks of business processes provides little context for evaluating the results.

• Makes it difficult to know:– Which control systems are most important.– Whether they adequately deal with risk.– Whether important control systems are missing.


CONTROL FRAMEWORKS

• ERM Framework Vs. the Internal Control Framework– The internal control framework has been

widely adopted as the principal way to evaluate internal controls as required by SOX. However, there are issues with it.

• It has too narrow of a focus.• Focusing on controls first has an inherent bias

toward past problems and concerns.

• May contribute to systems with many controls to protect against risks that are no longer important.


CONTROL FRAMEWORKS

• These issues led to COSO’s development of the ERM framework.– Takes a risk-based, rather than controls-based,

approach to the organization.– Oriented toward future and constant change.– Incorporates rather than replaces COSO’s internal

control framework and contains three additional elements:

• Setting objectives.• Identifying positive and negative events that may affect the

company’s ability to implement strategy and achieve objectives.

• Developing a response to assessed risk.


CONTROL FRAMEWORKS

– Controls are flexible and relevant because they are linked to current organizational objectives.

– ERM also recognizes more options than simply controlling risk, which include accepting it, avoiding it, diversifying it, sharing it, or transferring it.


CONTROL FRAMEWORKS

• Over time, ERM will probably become the most widely adopted risk and control model.

• Consequently, its eight components are the topic of the remainder of the chapter.

Education

Ais Romney 2006 Slides 06 Control And Ais Part 1