Types of Machine Systems
EdgeMaxLess Space but Maximum Productivity
• Rugged unitized steel table/frame• Full capture bearing assemblies • Low mass aluminum beam driven by dual
brushless AC motors• Fast acceleration• Precise motion• Stable cutting platform• Powered by the Messer Global Control S with
touch screen interface• Tool Coverage: 6x12, 6x24, 8x12, 8x24, 10x12 and
10x24 (1.8m to 7.3m)• Material Thickness Capacity: 26 ga. to 3"
(76mm) depending on process used• Materials Processed: Steel, Stainless steel,
Aluminum
PlateMasterYour Path to Profit
• Rugged steel, dual drive box beam gantry with heavy duty floor mounted rail system
• Available in widths from 8’ to 12’ (2.5m to 3.657m), and lengths from 10’ to 80’ (3.048m to 24.384m)
• Travels at an industry leading rapid speed of 1000 IPM.• Dual side drive Plasma and Oxyfuel cutting
MetalMaster PlusProvides the Highest Productivity
• Unitized table and gantry cutting machine
• Utilizes precision plasma processes up to 400 amps
• Produces excellent looking parts for the precision fabrication market
• Incorporates the all-in-one precision high speed cutting gantry and self cleaning table with superior part accuracy and quality
• This machine is ideal for:– Air Handling Equipment– Ductwork– Kitchen Equipment– Vessels and tanks– Boats and Leisure
Vehicles– Appliances– Precision Sheet Metal
Titan IIIPowerful Productivity, Incredible Strength and Flexibility
• New linear ways in the Y-Axis• New rack and pinion design• Wider end trucks
– Cutting widths from 6' to 14' (1.82m to 4.267m)• Electrical cabinets mount within the truck• Protection against harsh cutting and heat• Provide a clean look• Positioning speeds up to 1,200 ipm• Global Control Plus Windows® based with easy to use
operator interface• Virtual Service™ remote consultation and diagnostics• High productivity Smart Lifters
MPC2000Versatility and Increased Productivity
• Multi-process cutting machine • Equipped with multiple carriages • Up to five separate processes:– Precision plasma – Conventional plasma – Oxyfuel – Drill– Markers
• Enhanced linear ways• Long-life band drives • Larger end trucks • High accuracy, repeatability, and durability
TMC4500 DBThe Dependable Workhorse with Superior Performance
• Cutting widths from 16 ft. to 28 ft.• Cutting lengths up to 200 ft. • Drilling up to 4" diameter and tapping
up to 1 1/2" diameter• Heavy duty, machined 115 lb. / yd.
crane rail for X-Axis motion• Welded steel end trucks with precision
machined mating surfaces and with tolerances of .002" maintained
• Dual massive gantry process beams provide superior bending, and torsional strength for any tool combination selected
• Precision Linear Y-Axis way system with wide spacing to provide rigid support of any process tool
• Global Control Plus, Windows® based with easy to use operator interface
• Virtual ServiceTM remote consultation and diagnostics
• Positioning speeds up to 1,400 ipm• Machine motion accuracy ± 0.015" in
72" travel with .010" repeatability measured with a laser interferometer
• Machine service power track in both X and Y axis
• High speed Messer Cutting Systems programmable lifters (880 ipm Plasma, 150 ipm Oxyfuel)
• Designed and manufactured in the USA to machine tool and ISO 230-2 standards
• UL available
MetalMaster Plus Duel Pallet Shuttle TableGreater Flexibility, More Efficient, Enhanced Safety• Accurate, efficient and proven cutting capabilities• Effective and safe means of getting the plate to the cutting area• Slagger® advanced cutting support table with automatic slag /
smoke removal • Advanced shuttle table design for performance and reliable
operation
LaserMat®Top Shelf Cut Quality
• Cuts large format steel plates • Laser resonator sits on the machine and travels
with it in the longitudinal axis• Enables large working areas • Maintains a constant length of the laser beam path • Consistent cutting parameters over the entire
operating area• Simple vertical cuts• Bevel cuts possible • Marking options available
Fiber Laser Plasma CombinationHigh Precision Part Cutting Capability
• Combines Fiber laser with Plasma • Modern technology • Robust • Long-life
SicoMat®The Giant Among Cutting Systems
• Cuts areas up to 82' (25m) or more
• Almost unlimited working lengths
• Bevel cutting heads for Oxyfuel and Plasma
• Wide spectrum of marking processes
• Possibile sandblasting or grinding head
• Rigid, double beam bridge design
• High stability, accuracy, and productivity
THANKS!
Messer Cutting SystemsW141 N9427 Fountain Blvd. Menomonee Falls, WI 53051
T +1 262-255-5520 F +1 262-255-5170
@MesserCutting