Transcript
Page 1: PIERBURG Service information · Vacuum pump New application Service information ... on the parts (do not hit or lift ... SFPK Rotary vane pump for belt drive Vehicle Vacuum pump type

si 0011/A GB MSI-PG 11.02

Vacuum pumpNew application

Serviceinformation

PIERBURG sVehicle: RENAULT Product: Vacuum pump

Type Engine Construction year Replacement-no. Pierburg no. O.E. no.*)

Laguna-D 2,2l/63 kW 11.93–03.01 7.21666.60.0 7.21666.10.0 77 00 858 480

*) The reference numbers listed here should be used for comparisononly. They may not be used on invoices sent to final users..

From 11.93 on, Laguna diesel vehicles are equippedwith a Pierburg vacuum pump (see fig.).

Test procedure: As described in "ServiceInformation Vacuum pumps".

Test values: see chart and/or " ServiceInformation Vacuum pumps".

Test equipment: Vacuum pump testerOrder number: 4.07370.06.0

Note: In case of a replacement, the pulley fromthe removed pump should be used. Observethe instructions of the vehicle manufacturer.Observe insertion depth of the pulley!Use suitable tools in order to pull off and presson the parts (do not hit or lift up with a lever).Carefully check the condition and the tight seatof the pulley.

SFPK Rotary vane pump for belt drive

Vehicle Vacuum pump type Pierburg no. P1 T Pe Remarks mbar Sek mbar

RENAULT

SFPK

Attention!Belt tension accordingto the specification ofthe car manufacturer.

MSI Motor Service International GmbH • Hamburger Straße 15 • D-41540 Dormagen • Phone +49 (21 33) 267-100 • Fax +49 (21 33) 267-111www.msi-motor-service.com

Vacu

um

gen

erat

ion

© M

SI P

ierb

urg

Reg

.-N

r. 4

/4 1

9-13

0.1/

A -

GB

For details of changes with respect to coordination undreplacement, see → the corresponding current catalogues,TecDoc-CD and/or on TecDoc data-based systems.

Subject to changes and illustration variations.

7.21666.10.0 7.21666.60.0

500"

900"

4,5"

Recommended