100.0 ft

12.0 ft

4.0 ft

12.0 ft6.0 ft 12.0 ft 12.0 ft 11.0 ft

D

D

D

D

D

D

D

Work Zone

"Bikes Keep Right" sign mounted on first VP"Bike Lane Closed" sign placed in striped bike lane

Minimum 10 ft. vehicle lane

4 ft. temporary bike lane/detour28 in reflective cone

"Bikes Keep Right" sign mounted on first VP

Right lane ends W4-2R

Regulatory speed limit "25 MPH" R2-1 (example speed)

Right lane closed ahead W20-5R

Regulatory speed limit "35 MPH" R2-1 (example speed)

Speed reduction ahead W3-5

Road work ahead W20-1

DMD-Construction Coordination Section8/10/2016

T y p i c a l R i g h t L a n e a n d S t r i p e d B i k e L a n e C l o s u r eT y p i c a l R i g h t L a n e a n d S t r i p e d B i k e L a n e C l o s u r e

NOT TO SCALE

"Bike Lane Closed" sign placed in striped bike lane

Maintain temporary bike lane/detour through termination zone.

Per Section 1200.3.12 of the City of Albuquerque Standard Specifications

CONTRACTOR shall provide and maintain a safe and adequate meansof channelizing bicycle traffic around all work areas throughout the periods of construction when existing bicycle trails, lanes, or routes aredesignated. Where possible, adequate space for bicyclists must beprovided, and bicycle detour signs, including "Share the Road" signsshall be installed. When adequate space is not available to provide for bicycle access, the bicycle facilities shall be adequately detoured around the construction site. The detour route shall minimizeout-of-direction travel distance, and shall be adequately signed anddirected. Bicycle detour signs shall be incidental to payment for trafficcontrol.

Note: This typical right lane/bike lane closure should be used on roadways with a striped bike lane. "Share the Road" signage shouldONLY be used on designated bike routes which DO NOT have a stripedbike lane. Bikes should not be forced to share the road with high speedtraffic ( > 25 MPH).