Embed Size (px)
Citation preview
Scale.1:5 at A4
Date. 08.05.13
XLAM CLT - PANEL ASSEMBLY GUIDE - INDEX
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
PA 1.1Scale.1:5 at A4
Date. 08.05.13
XLAM FLOOR PANEL TO TIMBER SUB-FLOOR STRUCTURE
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
SUB-FLOOR STRUCTURE
COACH SCREWS SIZED BY ENGINEER
METAL ANGLE CLEATS TO ENGINEERS SPECIFICATION
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 1.2Scale.1:5 at A4
Date. 08.05.13
XLAM FLOOR PANEL TO CONCRETE FOUNDATION
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
CONCRETE OR CONCRETE BLOCKWORKFOUNDATION WALL
TIMBER STRINGER
CONCRETE ANCHOR BOLTS BY ENGINEER
REFER TO TYPICAL WALL CONNECTION DETAILS
DPC
DPC
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 1.3Scale.1:5 at A4
Date. 08.05.13
XLAM FLOOR PANEL TO CONCRETE FOUNDATION
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
CONCRETE OR CONCRETE BLOCKWORKFOUNDATION WALL
DPC
METAL ANGLE CLEATS REBATED INTOFLOOR PANEL
TIMBER WALL PLATE
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 2.1Scale.1:5 at A4
Date. 08.05.13
XLAM MID FLOOR - BALLOON CONSTRUCTION
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
XLAM CLT WALL PANEL
CORBEL SIZED BY ENGINEER
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 2.2Scale.1:5 at A4
Date. 08.05.13
XLAM MID FLOOR - PLATFORM CONSTRUCTION - CLT WALL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
WALL PANEL WHERE APPLICABLE
XLAM CLT FLOOR PANEL
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 2.3Scale.1:5 at A4
Date. 08.05.13
XLAM MID FLOOR - PLATFORM CONSTRUCTION - FRAME WALL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
WALL PANEL WHERE APPLICABLE
XLAM CLT FLOOR PANEL
TIMBER FRAME WALL
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.1Scale.1:5 at A4
Date. 08.05.13
XLAM WALL TO CANTILEVER FLOOR
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
METAL ANGLE CLEAT SIZED BY ENGINEER
XLAM CLT FLOOR PANEL
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
PA 3.1 (a) FIXING FROM UNDERSIDE
PA 3.1 (b) FIXING FROM TOP
PA 3.1 (c) METAL ANGLE FIXING
XLAM CLT FLOOR PANEL
XLAM CLT WALL PANEL
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.2Scale.1:5 at A4
Date. 08.05.13
XLAM WALL BASE TO CONCRETE FLOOR
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
CONCRETE STRUCTURE BY ENGINEER
COACH SCREW SIZED BY ENGINEER
METAL ANGLE CLEAT SIZED BY ENGINEER
CONCRETE ANCHOR BOLTS BY ENGINEER
DPC
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.3Scale.1:5 at A4
Date. 08.05.13
XLAM INTERNAL WALL BASE TO XLAM FLOOR
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT FLOOR PANEL
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.4Scale.1:5 at A4
Date. 08.05.13
XLAM INTERNAL WALL BASE TO CONCRETE FLOOR
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL SECURED TO BASEPLATE WITH NAIL PLATE BY ENGINEER
CONCRETE STRUCTURE BY ENGINEER
DPC
TIMBER BASE PLATE SECURED TO CONCRETEFLOOR WITH CAST IN ANCHORS
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.5Scale.1:5 at A4
Date. 08.05.13
XLAM WALL JUNCTION - PLAN DETAIL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
XLAM CLT WALL PANEL
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.6Scale.1:5 at A4
Date. 08.05.13
XLAM REBATED WALL JUNCTION - PLAN DETAIL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
XLAM CLT WALL PANEL REBATED TO RECEIVE PANEL
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 3.7Scale.1:5 at A4
Date. 08.05.13
XLAM WALL 'T' JUNCTION - PLAN DETAIL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
XLAM CLT WALL PANEL
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.1Scale.1:5 at A4
Date. 08.05.13
XLAM ROOF ON XLAM WALL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
XLAM CLT ROOF PANEL
ENGINEERED WOOD SCREW
XLAM CLT ROOF PANEL SHAPED TOSUIT ROOF PITCH
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.2Scale.1:5 at A4
Date. 08.05.13
XLAM ROOF ON FRAMED WALL
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT ROOF PANEL
TIMBER FRAME WALL
SHAPED CLT PANEL EDGETO SUIT ROOF PITCH
SHAPED TOP PLATETO SUIT ROOF PITCH
PA 4.2 (a) SHAPED PANEL EDGE PA 4.2 (b) SHAPED TOP PLATE
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.3Scale.1:5 at A4
Date. 08.05.13
XLAM ROOF PANEL ON INTERMEDIATE ROOF BEAM
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
TIMBER ROOF BEAM
XLAM CLT ROOF PANEL
ENGINEERED WOOD SCREW
STEEL ROOF BEAM
TIMBER PACKER
COACH SCREW SIZED BY ENGINEER
PA 4.3 (a) TIMBER ROOF BEAM
PA 4.3 (b) STEEL ROOF BEAM
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.4Scale.1:5 at A4
Date. 08.05.13
XLAM PANEL TO PANEL RIDGE CONNECTION
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT ROOF PANELWITH SQUARE EDGE
XLAM CLT ROOF PANEL SHAPEDTO SUIT ROOF PITCH
SHAPED TOP PLATEWHERE WALL FRAMINGSUPPORTS ROOF
TOP OF XLAM CLT WALLPANEL SHAPED TO SUITROOF PITCH
PA 4.4 (a) SQUARE EDGE PANEL AT RIDGE
PA 4.4 (b) SHAPED EDGE PANEL AT RIDGE
METAL CLEATS BY ENGINEER
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.5Scale.1:5 at A4
Date. 08.05.13
XLAM ROOF PANEL ON XLAM WALL PANEL AT BARGE
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT WALL PANEL
ENGINEERED WOOD SCREW
XLAM CLT ROOF PANEL
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 4.6Scale.1:5 at A4
Date. 08.05.13
XLAM ROOF PANEL ON FRAMED WALL AT BARGE
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
XLAM CLT ROOF PANEL
TIMBER FRAME WALL
ENGINEERED WOOD SCREW
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
PA 5.1Scale.1:5 at A4
Date. 08.05.13
XLAM PANEL TO PANEL CONNECTION
Telephone: +64 (0) 3 538 0930
57 Beatty St, Tahunanui, Nelson 7041, New Zealand
Email: [email protected]: www.xlam.co.nz
Details shown are indicative only and subject to project-specific design
V 1.1
ENGINEERED WOOD SCREW
XLAM CLT PANEL REBATED TO RECEIVENEIGHBOURING PANEL
TIMBER SURFACE SPLINE
XLAM CLT PANEL REBATED FORBRIDGING PLATE
ENGINEERED WOOD SCREW
PA 5.1 (a) HALF LAP JOINT
PA 5.1 (b) SINGLE SPLINE JOINT
Edge distances and penetrations of engineered wood screws are to be specified by the Structural Engineer
