Embed Size (px)
Citation preview
Unique Features!Pneumatic roll-to-roll cold laminator 1600mm.Take-Up system included. Speed: 5,5sqm/min, silicon roll (heated) 130mm, maximum temperature 60°C.Material thickness up to 30mm.
Quick and easy to use, allows you to save workforce and improve productivity. With the laminator Xlam 1600 Cold, increases the quality of your work with better saturation and color performace of your graphics.
High efficiencyNo crease or bubble, guarantees excellent results even at temperatures below 60°C. Equipped with footswitch feeding, allows the operator to keep both hands freefor the laminating of widest supports.
Safety warrantyThe photocell sensor prevents you place your hands near roller during the lamination. The emergency shutdown button is clearly visible on the front of the machine.
www.xlam.biz
60 °C
max. temperature
130 mm
main roll Ø
30 mm
max. material thickness
XL1600 cold
ModelXlam 1600 Cold
Product codeXL1600C
Maximum laminating film width1600 mm
Maximum material thickness30 mm
Maximum temperature60 °C
Maximum laminating speed5,5 sqm/min
Main silicon roll diameter130 mm
Main roll movingby air compressor
Footswitch feedingincluded
Take-Up systemincluded
Warm-up time10-15 minutes
Heating methodInternal with infrared light
Maximum power2500 W
Voltage220 v - 50 hz
Temperature/speed controlMicro Control
Dimensions (l x h x p)1910 x 1100 x 630 mm
Weight180 kg
Packaginganti-shock wooden
Packaging dimensions (l x h x p)2130 X 710 x 680 mm
Packaging weight200 kg
Warranty1 year
Safetyphotocell / CE certification
This brochure can be subject to variations as being revised for which it is to be understood SE&O.
PNEUMATIC COLD LAMINATORXL1600 cold
XL1600C-eng-AB-031214
Authorized Reseller
www.xlam.biz / [email protected]
