ALWAYS TRUST A

MANUAL MACHINES

800 Sprucelake Drive, Harbor City, CA 90710

Telephone : Toll Free : Website : Email :

(310)518-1100(800)421-2105

www.lagun.cominfo@lagun.com

VERTICAL MIllS

VERTICAL BED MILLS

VERTICAL HORIZONTAL MILLS

HORIZONTAL BORING MILLS

FTV-2F | MILLMATICS |MEGAMILLS

VBM-610S-A | VBM-800-A |VBM-1000-AVBM-1300/1600-A | VBM-1300G/1600G-A

FMC | FU |FUTV

HBMC-TT-110R | R2 |R3

Table Size up to 58” x 11” (1,473 x 279 mm)

Max. Weight on Table 661 - 1,200 lb (300 - 545 kg)

Main Motor 3 - 5 Hp (2.24 - 3.72 kW)

*OPTIONAL CNC AVAILALBE

Table Size up to 18” x 71” (450 x 1,800 mm)

Max. Weight on Table 1,550 - 2,205 lb (703 - 1,000 kg)

Main Motor 5 Hp (3.72 kW)

*AVAILABLE WITH EVS or Gear Head

Table Size up to 73” x 14” (1,850 x 350 mm)

Max. Weight on Table 660 - 1,540 lb (300 - 700 kg)

Main Motor 5.5 - 10 Hp (4.1 - 7.5 kW)

Table Size 59” x 118” (1,500 x 3,000 mm)

Max. Weight on Table 14,330 - 22,046 lb (6,500 - 10,000 kg)

Main Motor 29.5 Hp (22 kW)

FOR MORE INFORMATION ON OUR OTHER PRODUCTS VISIT WWW.LAGUN.COM

ULTRA HI-PRECISION LATHES

DRILLS

AMERICAN TURNMASTERAND REPUBLIC LATHES

LAGUN LIBERTY SERIES

GRINDERS

POWER SERIES LATHES

AT| ATC | ET | TR | SO | FL | HC | TM

RBD| RFD | RL | RF

AT| RL | ML

SC| SE |ST

AMERICAN TURNMASTER LATHESLK |LS

TOOL AND CUTTER| SURFACE | CENTERLESSI.D | CYLINDRICAL | ROTARY | ROLL TYPE

POWER ONE| POWER FIVE | POWER 5.5 POWER 6 |POWER 7 | POWER 8

FLOOR/BENCH DRILL PRESSES

Drill Capacity (RBD) 0.71” - 0.98”

Drill Capacity (RFD) 1” - 2.75”

Main Motor 2 - 10 Hp

Swing Over Bed 9” - 13”(229 - 330 mm)

Main Motor 12 - 3 Hp(0.1 - 2 kW)

Spindle Speed Range 0 - 4,000 RPM

*CNC AVAILABLE

Swing Over Bed 13” - 36”(340 - 930 mm)

Distance Between Centers 40” -240”(1,000 - 6,000 mm)

Main Motor 5 - 20 Hp(12 - 14 kW)

Swing Over Bed 13” - 36”(340 - 930 mm)

Distance Between Centers 40” -240”(1,000 - 6,000 mm)

Main Motor 5 - 20 Hp(12 - 14 kW)

Swing Over Bed 14” -40”(360 - 1,010 mm)

Distance Between Centers 30” - 197”(750 - 5,000 mm)

Main Motor 5 - 29 Hp(4 - 22 kW)

*CNC AVAILABLE

Swing Over Bed 17” - 74”(445 - 1,900 mm)

Distance Between Centers 60” -480”(1,500 - 12,000 mm)

Main Motor 30 - 200 Hp(22 - 149 kW)

*SPECIAL TURRETS *TWIN CARRIAGES

RADIAL DRILLS

Arm Lengths 4” - 10”

Centerless RotaryI.D Roll TypeSurfaceTool and Cutter Cylindrical