Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
TTHHÖÖ VVIIEEÄÄNN ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTIIEEÂÂUU CCHHUUAAÅÅNN
VVIIEEÄÄTT NNAAMM && TTHHEEÁÁ GGIIÔÔÙÙII
TTHHAAÙÙNNGG 0011//22001100
hhttttpp::////lliibb..hhuuii..eedduu..vvnn
2
Tiêu chuẩn Việt Nam- TCVN
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 TCVN 2246-1:2008 thay
thế: TCVN 2246:1997
Ren ISO thông dụng. Profin gốc. Phần 1: Ren hệ
mét.
6
2 TCVN 2246-2:2008 thay
thế: TCVN 2246:1997
Ren ISO thông dụng. Profin gốc. Phần 2: Ren hệ
inch.
7
3
TCVN 2573-2:2009 Máy kéo nông nghiệp. Trục trích công suất phía
sau loại 1, 2 và 3. Phần 2: Máy kéo có khoảng
cách vết bánh hoặc xích hẹp. Kích thước vỏ bảo
vệ và khoảng không gian trống.
8
4
TCVN 2573-3:2009 Máy kéo nông nghiệp. Trục trích công suất phía
sau loại 1, 2 và 3. Phần3: Kích thước chính của
trục trích công suất và then hoa, vị trí của trục
trích công suất.
16
5
TCVN 4673:2008 thay
thế: TCVN 2255:1989;
TCVN 4673:1989
Ren ISO hình thang hệ mét. Kích thước cơ bản. 10
6 TCVN 4683-1:2008
Ren hệ mét thông dụng ISO. Dung sai. Phần 1:
Nguyên lý và thông số cơ bản.
22
7 TCVN 4683-2:2008 Ren hệ mét thông dụng ISO. Dung sai. Phần 2:
Giới hạn kích thước dùng cho ren ngoài và ren
trong thông dụng. Loại dung sai trung bình.
10
8 TCVN 4683-3:2008 Ren hệ mét thông dụng ISO. Dung sai. Phần 3:
Sai lệch đối với ren kết cấu.
20
9
TCVN 4683-4:2008 Ren hệ mét thông dụng ISO. Dung sai. Phần 4:
Kích thước giới hạn ren ngoài khi mạ kẽm nhùng
nóng lắp với ren trong được ta rô có vị trí miền
dung sai H hoặc G sau mạ.
8
10
TCVN 4683-5:2008 Ren hệ mét thông dụng ISO. Dung sai. Phần 5:
Kích thước giới hạn ren trong lắp với ren ngoài
mạ kẽm nhúng nóng có kích thước lớn nhất của vị
trí miền dung sai trước khi mạ.
7
11 TCVN 4832:2009 thay
thế: TCVN 4832:1989
Tiêu chuẩn chung đối với các chất nhiễm bẩn và
các độc tố trong thực phẩm.
60
12 TCVN 5520:2009 thay
thế: TCVN 5520:1991
Quy phạm đạo đức trong thương mại quốc tế về
thực phẩm.
9
3
13 TCVN 5624-1:2009 thay
thế: TCVN 5624:1991
Danh mục giới hạn dư lượng tối đa thuốc bảo vệ
thực vật và giới hạn dư lượng tối đa thuốc bảo vệ
thực vật ngoại lai. Phần 1: Theo hoạt chất thuốc
bảo vệ thực vật.
111
14 TCVN 5624-2:2009 Danh mục giới hạn dư lượng tối đa thuốc bảo vệ
thực vật và giới hạn dư lượng tối đa thuốc bảo vệ
thực vật ngoại lai. Phần 2: Theo nhóm sản phẩm.
119
15 TCVN 7046:2009 thay
thế: TCVN 7046:2002
Thịt tươi. Yêu cầu kỹ thuật. 10
16 TCVN 7047:2009 thay
thế: TCVN 7047:2002
Thịt lạnh đông. Yêu cầu kỹ thuật. 10
17 TCVN 7050:2009 thay
thế: TCVN 7050:2002
Thịt và sản phẩm thịt chế biến không qua xử lý
nhiệt. Yêu cầu kỹ thuật.
9
18 TCVN 7405:2009 thay
thế: TCVN 7405:2004
Sữa tươi nguyên liệu. 8
19 TCVN 8079:2009 thay
thế: TCVN 5448:1991
Sữa bột. Xác định độ axit bằng phương pháp
chuẩn độ (Phương pháp chuẩn).
8
20 TCVN 8080:2009 thay
thế: TCVN 5448:1991
Sữa đặc. Xác định độ axit bằng phương pháp
chuẩn độ.
11
21 TCVN 8081:2009 thay
thế: TCVN 5533:1991
Sữa đặc có đường. Xác định hàm lượng chất khô
tổng số (Phương pháp chuẩn).
9
22 TCVN 8082:2009 thay
thế: TCVN 5533:1991
Sữa, ream và sữa cô đặc. Xác định hàm lượng
chất khô tổng số (Phương pháp chuẩn).
9
23 TCVN 8099-1:2009 Sữa. Xác định hàm lượng nitơ. Phần 1: Phương
pháp Kjeldahl.
17
24 TCVN 8099-2:2009 Sữa. Xác định hàm lượng nitơ. Phần 2: Phương
pháp phân hủy kín (Phương pháp macro).
15
25 TCVN 8099-3:2009 Sữa. Xác định hàm lượng nitơ. Phần 3: Phương
pháp phân hủy kín (Phương pháp nhanh semi-
macro).
16
26 TCVN 8099-4:2009 Sữa. Xác định hàm lượng nitơ. Phần 4: Phương
pháp xác định hàm lượng nitơ phi protein.
11
27 TCVN 8099-5:2009 Sữa. Xác định hàm lượng nitơ. Phần 5: Phương
pháp xác định hàm lượng nitơ protein.
12
28 TCVN 8100:2009 Sữa và sản phẩm sữa. Xác định hàm lượng nitơ.
Phương pháp thông dụng theo nguyên tắc đốt
cháy dumas.
20
29
TCVN 8101:2009 Sữa và sản phẩm sữa. Xác định thuốc bảo vệ thực
vật nhóm clo hữu cơ và polyclobiphenyl. Phương
pháp sắc ký ký lỏng mao quản có detector bắt giữ
elecon.
20
4
30 TCVN 8102:2009 Sữa và sản phẩm sữa. Xác định hàm lượng axit
benzoic và axit sorbic.
15
31 TCVN 8103:2009 Sữa và sản phẩm sữa. Phương pháp chiết lipit và
các hợp chất hòa tan trong lipit.
11
32 TCVN 8104:2009 Sữa, sản phẩm sữa và các chủng khởi độn ưa ẩm.
Định lượng vi khuẩn lactic lên men xiat. Kỹ thuật
đếm khuẩn lạc ở 25 độ C.
18
33 TCVN 8105:2009 Sữa và sản phẩm sữa. Xác định hàm lượng niat.
Phương pháp khử enzym và đo phổ hấp thụ phân
tử sau phản ứng griess.
22
34 TCVN 8106:2009 Sữa và sản phẩm sữa. Xác định dư lượng kháng
sinh. Phép thử phân tán ong ống nghiệm.
21
35 TCVN 8107:2009 Sữa và sản phẩm sữa. Xác định hàm lượng
lactoza bằng sắc ký lỏng hiệu năng cao (Phương
pháp chuẩn).
16
36 TCVN 8108:2009 Sữa. Xác định hàm lượng lactuloza. Phương pháp
enzym.
14
37 TCVN 8109:2009 Sữa cô đặc và sữa đặc có đường. Xác định hàm
lượng chất béo. Phương pháp khối lượng
(Phương pháp chuẩn).
21
38 TCVN 8110:2009 Sữa cô đặc đóng hộp. Xác định hàm lượng thiếc.
Phương pháp đo phổ hấp thụ nguyên tử dùng lò
graphit.
14
39 TCVN 8111:2009 Sữa, sữa bột, buttermilk, buttermilk bột, whey và
whey bột. Phát hiện hoạt độ phosphataza.
15
40 TCVN 8117:2009 Rau quả và sản phẩm rau quả. Phân hủy chất hữu
cơ ước khi phân tích. Phương pháp ướt.
10
41 TCVN 8118:2009 Rau quả và sản phẩm rau quả. Phân hủy chất hữu
cơ ước khi phân tích. Phương pháp tro hóa.
8
42 TCVN 8119:2009 Rau quả và sản phẩm rau quả. Xác định hàm
lượng sắt. Phương pháp đo quang dùng 1,10-
phenanthrolin.
9
43 TCVN 8120:2009 Rau quả và sản phẩm rau quả. Xác định độ kiềm
của tro tổng số và của tro tan trong nước.
10
44 TCVN 8121:2009 Rau quả và sản phẩm rau quả. Xác định hàm
lượng sulfua dioxit (Phương pháp thông dụng).
9
45 TCVN 8122:2009 Sản phẩm rau, quả. Xác định nồng độ axit
benzoic và axit sorbic. Phương pháp sắc ký lỏng
hiệu năng cao.
15
46 TCVN 8134:2009 Thịt và sản phẩm thịt. Xác định hàm lượng nitơ
(Phương pháp chuẩn).
10
5
47 TCVN 8135:2009 Thịt và sản phẩm thịt. Xác định độ ẩm (Phương
pháp chuẩn).
10
48 TCVN 8136:2009 Thịt và sản phẩm thịt. Xác định hàm lượng chất
béo tổng số.
8
49 TCVN 8137:2009 Thịt và sản phẩm thịt. Xác định hàm lượng chất
béo tự do.
10
50 TCVN 8138:2009 Thịt và sản phẩm thịt. Phát hiện polyphosphat. 10
51 TCVN 8139:2009 Sản phẩm thịt. Xác định hàm lượng tinh bột
(Phương pháp chuẩn).
13
52 TCVN 8140:2009 Thịt và sản phẩm thịt. Xác định hàm lượng
chloramphenicol. Phương pháp sắc ký lỏng hiệu
năng cao.
13
53 TCVN 8141:2009 Thịt và sản phẩm thịt. Xác định hàm lượng
phospho tổng số (Phương pháp chuẩn).
9
54 TCVN 8142:2009 Thịt và sản phẩm thịt. Xác định hàm lượng
hydroxyprolin.
12
55 TCVN 8146:2009 Nhiên liệu chưng cất. Phương pháp xác định độ
ổn định oxy hóa (Phương pháp nhanh).
15
56 TCVN 8147:2009 Sản phẩm dầu mỏ dạng lỏng. Xác định este metyl
axit béo (fame) trong phần cất giữa. Phương pháp
quang phổ hồng ngoại.
10
57 TCVN 8148:2009 Bơ. Xác định hàm lượng muối. 10
58 TCVN 8149:2009 Bơ. Xác định chỉ số khúc xạ của chất béo
(Phương pháp chuẩn).
8
59 TCVN 8150:2009 Bơ. Xác định độ cứng. 14
60 TCVN 8151-1:2009 Bơ. Xác định độ ẩm, hàm lượng chất khô không
béo và hàm lượng chất béo. Phần 1: Xác định độ
ẩm (Phương pháp chuẩn).
10
61
TCVN 8151-2:2009 Bơ. Xác định độ ẩm, hàm lượng chất khô không
béo và hàm lượng chất béo. Phần 2: Xác định
hàm lượng chất khô không béo (Phương pháp
chuẩn).
11
62 TCVN 8151-3:2009 Bơ. Xác định độ ẩm, hàm lượng chất khô không
béo và hàm lượng chất béo. Phần 3: Tính hàm
lượng chất béo.
7
63 TCVN 8152:2009 Bơ. Xác định độ pH của serum. Phương pháp đo
điện thế.
9
64 TCVN 8153:2009 Bơ. Xác định chỉ số phân tán nước. 9
65 TCVN 8157:2009 Thịt xay nhuyễn chế biến sẵn. 11
66 TCVN 8158:2009 Thịt xay thô chế biến sẵn. 11
6
67 TCVN 8159:2009 Thịt đùi lợn chế biến sẵn. 11
68
TCVN 8160-4:2009 Thực phẩm. Xác định hàm lượng nitrat và/hoặc
nitrit. Phần 4: Phương pháp xác định hàm lượng
nitrat và nitrit trong sản phẩm thịt bằng sắc ký
trao đổi ion.
18
69
TCVN 8161:2009 Thực phẩm. Xác định patulin trong nước táo
trong, nước táo đục và puree. Phương pháp sắc ký
lỏng hiệu năng cao có làm sạch phân đoạn
lỏng/lỏng.
16
70 TCVN 8162:2009 Thực phẩm. Xác định fumonisin B1 và B2 trong
ngô. Phương pháp sắc ký lỏng hiệu năng cao có
làm sạch bằng chiết pha rắn.
18
71 TCVN 8193-1:2009 Đo lưu lượng nước trong kênh hở bằng đập tràn
và máng lường venturi. Phần 1: Đập tràn thành
mỏng.
46
72 TCVN 8194-1:2009 Thiết bị phun thuốc nước bảo vệ cây trồng.
Phương pháp thử đánh giá hệ thống làm sạch.
Phần 1: Làm sạch bên trong toàn bộ thiết bị phun.
10
73 TCVN 8194-2:2009 Thiết bị phun thuốc nước bảo vệ cây trồng.
Phương pháp thử đánh giá hệ thống làm sạch.
Phần 2: Làm sạch bên ngoài toàn bộ thiết bị phun.
14
74 TCVN 8194-3:2009 Thiết bị phun thuốc nước bảo vệ cây trồng.
Phương pháp thử đánh giá hệ thống làm sạch.
Phần 3: Làm sạch bên trong thùng chứa.
10
75 TCVN 8195:2009 Thiết bị rắc thuốc hạt dạng rời trừ sinh vật hại
hoặc diệt cỏ. Phương pháp thử.
26
76 TCVN 8210:2009 Ngũ cốc và sản phẩm nghiền từ ngũ cốc. Xác
định độ axit chuẩn độ.
9
77 TCVN 8283:2009 Giống vật nuôi. Thuật ngữ di uyền và công tác
chọn giống
36
78 TCVN 8284:2009 Nhà máy chế biến chè. Yêu cầu trong thiết kế và
lắp đặt
21
Tiêu chuẩn ISO
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 ISO 10874:2009 Resilient, textile and laminate floor coverings -
Classification.
3
7
2
ISO 11545:2009 Agricultural irrigation equipment - Cene-pivot
and moving lateral irrigation machines with
sprayer or sprinkler nozzles - Determination of
uniformity of water disibution.
16
3
ISO 11737-2:2009 Sterilization of medical devices - Microbiological
methods. Part 2: Tests of sterility performed in
the definition, validation and maintenance of a
sterilization process.
16
4 ISO 13351:2009 Fans - Dimensions. 13
5 ISO 14343:2009 Welding consumables - Wire elecodes, sip
elecodes, wires and rods for arc welding of
stainless and heat resisting steels - Classification.
15
6 ISO 148-1:2009 Metallic materials - Charpy pendulum impact test
. Part 1: Test method.
26
7 ISO 15136-1:2009 Peoleum and natural gas indusies - Progressing
cavity pump systems for artificial lift. Part 1:
Pumps
111
8 ISO 16894:2009 Wood-based panels - Oriented sand board (OSB).
Definitions, classification and specifications
14
9 ISO 17267:2009 Intelligent ansport systems - Navigation systems.
Application programming interface (API).
139
10 ISO 17364:2009 Wood-based panels - Oriented sand board (OSB).
Definitions, classification and specifications.
23
11 ISO 17365:2009 Supply chain applications of RFID - ansport
units.
19
12 ISO 17366:2009 Supply chain applications of RFID - Product
packaging.
21
13 ISO 17367:2009 Supply chain applications of RFID - Product
tagging.
41
14
ISO 21809-4:2009 Peoleum and natural gas indusies - External
coatings for buried or submerged pipelines used
in pipeline ansportation systems - Part 4:
Polyethylene coatings (2-layer PE).
34
15 ISO 22769:2009 Oil of Ausalian sandalwood (Santalum spicatum
(R.Br.) A.DC.).
9
16 ISO 23848-1:2009 Machine tools - Ball splines. Part 1: General
characteristics and requirements.
22
17 ISO 23848-2:2009 Machine tools - Ball splines. Part 2: Dynamic and
static load ratings and rating life.
8
8
18 ISO 29945:2009 Refrigerated non-peoleum-based liquefied
gaseous fuels - Dimethylether (DME) - Method
of manual sampling onshore terminals.
10
19 ISO 3691-5:2009 Indusial ucks - Safety requirements and
verification - Part 5: Pedesian-propelled ucks.
31
20 ISO 5536:2009 Milk fat products - Determination of water
content. Karl Fischer method.
8
21 ISO 7176-9:2009 Resilient, textile and laminate floor coverings -
Classification.
10
22 ISO 8000-110:2009 Data quality - Part 110: Master data: Exchange of
characteristic data: Syntax, semantic encoding,
and conformance to data specification.
1
23 ISO 8724:2009 Cork decorative panels - Specificati. 10
24 ISO/ 10255:2009 Document management applications - Optical
disk storage technology, management and
standards.
24
25
ISO/ 11633-1:2009 Health informatics - Information security
management for remote maintenance of medical
devices and medical information systems - Part 1:
Requirements and risk analysis.
17
26 ISO/HL7 10781:2009 Eleconic Health Record-System Functional
Model, Release 1.1.
213
27 ISO/HL7 27932:2009 Data Exchange Standards - HL7 Clinical
Document Architecture, Release 2
153
28 ISO/HL7 27951:2009 Health informatics - Common terminology
services, release 1.
81
29
ISO/IEC 13170:2009 Information technology - 120 mm (8,54 Gbytes
per side) and 80 mm (2,66 Gbytes per side) DVD
re-recordable disk for dual layer (DVD-RW for
DL).
175
30 ISO/IEC 14496-
12:2008/Amd 1:2009
General improvements including hint acks,
metadata support and sample groups.
49
31 ISO/IEC 15444-
12:2008/Amd 1:2009
General improvements including hint acks,
metadata support and sample groups.
49
32 ISO/TS 12813:2009 Eleconic fee collection - Compliance check
communication for autonomous systems.
44
33 ISO/TS 29002-10:2009 Indusial automation systems and integration -
exchange of characteristic data. Part 10:
Characteristic data exchange format.
4
9
34 ISO/TS 29002-31:2009 Indusial automation systems and integration -
Exchange of characteristic data - Part 31: Query
for characteristic data.
3
35 ISO/TS 29002-4:2009 Indusial automation systems and integration -
Exchange of characteristic data. Part 4: Basic
entities and types.
2
36 ISO/TS 8000-130:2009 Data quality - Part 130: Master data: Exchange of
characteristic data: Accuracy.
1
37 ISO/TS 8000-140:2009 Data quality - Part 140: Master data: Exchange of
characteristic data: Completeness.
1
Tiêu chuẩn Mỹ - ASTM
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 ASTM A135 / A135M -
09
ASTM A135 / A135M - 09 Standard
Specification for Elecic-Resistance-Welded Steel
Pipe.
8
2
ASTM A213 / A213M -
09b
ASTM A213 / A213M - 09b Standard
Specification for Seamless Ferritic and Austenitic
Alloy-Steel Boiler, Superheater, and Heat-
Exchanger Tubes.
13
3 ASTM A295 / A295M -
09
ASTM A295 / A295M - 09 Standard
Specification for High-Carbon Anti-Friction
Bearing Steel.
4
4 ASTM A335 / A335M -
09
ASTM A335 / A335M - 09 Standard
Specification for Seamless Ferritic Alloy-Steel
Pipe for High-Temperature Service.
10
5 ASTM A403 / A403M -
09
ASTM A403 / A403M - 09 Standard
Specification for Wrought Austenitic Stainless
Steel Piping Fittings.
8
6
ASTM A409 / A409M -
09
ASTM A409 / A409M - 09 Standard
Specification for Welded Large Diameter
Austenitic Steel Pipe for Corrosive or High-
Temperature Service.
7
7 ASTM A423 / A423M -
09
ASTM A423 / A423M - 09 Standard
Specification for Seamless and Elecic-Welded
Low-Alloy Steel Tubes.
3
8 ASTM A450 / A450M -
09
ASTM A450 / A450M - 09 Standard
Specification for General Requirements for
Carbon and Low Alloy Steel Tubes.
10
10
9 ASTM A488 / A488M -
09
ASTM A488 / A488M - 09 Standard Practice for
Steel Castings, Welding, Qualifications of
Procedures and Personnel.
18
10
ASTM A500 / A500M -
09
ASTM A500 / A500M - 09 Standard
Specification for Cold-Formed Welded and
Seamless Carbon Steel Suctural Tubing in
Rounds and Shapes.
5
11 ASTM A534 - 09 ASTM A534 - 09 Standard Specification for
Carburizing Steels for Anti-Friction Bearings.
4
12
ASTM A672 / A672M -
09
ASTM A672 / A672M - 09 Standard
Specification for Elecic-Fusion-Welded Steel
Pipe for High-Pressure Service at Moderate
Temperatures.
7
13
ASTM A691 / A691M -
09
ASTM A691 / A691M - 09 Standard
Specification for Carbon and Alloy Steel Pipe,
Elecic-Fusion-Welded for High-Pressure Service
at High Temperatures.
6
14
ASTM A727 / A727M -
09
ASTM A727 / A727M - 09 Standard
Specification for Carbon Steel Forgings for
Piping Components with Inherent Notch
Toughness.
4
15 ASTM A756 – 09 ASTM A756 - 09 Standard Specification for
Stainless Anti-Friction Bearing Steel.
5
16
ASTM A758 / A758M -
09
ASTM A758 / A758M - 09 Standard
Specification for Wrought-Carbon Steel Butt-
Welding Piping Fittings with Improved Notch
Toughness.
5
17
ASTM A774 / A774M -
09
ASTM A774 / A774M - 09 Standard
Specification for As-Welded Wrought Austenitic
Stainless Steel Fittings for General Corrosive
Service at Low and Moderate Temperatures.
4
18 ASTM A790 / A790M -
09a
ASTM A790 / A790M - 09a Standard
Specification for Seamless and Welded
Ferritic/Austenitic Stainless Steel Pipe.
9
19 ASTM A813 / A813M -
09
ASTM A813 / A813M - 09 Standard
Specification for Single- or Double-Welded
Austenitic Stainless Steel Pipe.
8
20 ASTM A866 - 09 ASTM A866 - 09 Standard Specification for
Medium Carbon Anti-Friction Bearing Steel.
4
11
21
ASTM A928 / A928M -
09a
ASTM A928 / A928M - 09a Standard
Specification for Ferritic/Austenitic (Duplex)
Stainless Steel Pipe Elecic Fusion Welded with
Addition of Filler Metal.
6
22
ASTM A930 - 09 ASTM A930 - 09 Standard Practice for Life-
Cycle Cost Analysis of Corrugated Metal Pipe
Used for Culverts, Storm Sewers, and Other
Buried Conduits.
5
23 ASTM A994 - 09 STM A994 - 09 Standard Guide for Editorial
Procedures and Form of Product Specifications
for Steel, Stainless Steel, and Related Alloys .
9
24
ASTM A1003 / A1003M -
09
ASTM A1003 / A1003M - 09 Standard
Specification for Steel Sheet, Carbon, Metallic-
and Nonmetallic-Coated for Cold-Formed
Framing Members.
7
25 ASTM B49 - 09 ASTM B49 - 09 Standard Specification for
Copper Rod Drawing Stock for Elecical
Purposes.
7
26 ASTM B313 / B313M - 09 ASTM B313 / B313M - 09 Standard
Specification for Aluminum and Aluminum-
Alloy Round Welded Tubes.
10
27 ASTM B391 - 09 ASTM B391 - 09 Standard Specification for
Niobium and Niobium Alloy Ingots.
3
28 ASTM B392 - 09 ASTM B392 - 09 Standard Specification for
Niobium and Niobium Alloy Bar, Rod, and Wire.
4
29 ASTM B393 - 09 ASTM B393 - 09 Standard Specification for
Niobium and Niobium Alloy Sip, Sheet, and
Plate.
5
30 ASTM B394 - 09 ASTM B394 - 09 Standard Specification for
Niobium and Niobium Alloy Seamless and
Welded Tubes.
4
31 ASTM B584 - 09 ASTM B584 - 09 Standard Specification for
Copper Alloy Sand Castings for General
Applications.
7
32 ASTM B917 / B917M - 09 ASTM B917 / B917M - 09 Standard Practice for
Heat eatment of Aluminum-Alloy Castings from
All Processes.
13
33 ASTM B935 - 05(2009)e1 ASTM B935 - 05(2009)e1 Standard Guide for
Steam eatment of Ferrous Powder Metallurgy
(P/M) Materials.
3
12
34 ASTM C34 - 09 ASTM C34 - 09 Standard Specification for
Suctural Clay Load-Bearing Wall Tile.
3
35 ASTM C1088 - 09a ASTM C1088 - 09a Standard Specification for
Thin Veneer Brick Units Made From Clay or
Shale.
4
36 ASTM C1521 - 09e1 ASTM C1521 - 09e1 Standard Practice for
Evaluating Adhesion of Installed
Weatherproofing Sealant Joints.
7
37 ASTM C1710 - 09 ASTM C1710 - 09 Standard Guide for
Installation of Flexible Closed Cell Preformed
Insulation in Tube and Sheet Form.
9
38 ASTM D500 - 95(2009) ASTM D500 - 95(2009) Standard Test Methods
of Chemical Analysis of Sulfonated and Sulfated
Oils.
12
39 ASTM D501 - 03(2009) ASTM D501 - 03(2009) Standard Test Methods
of Sampling and Chemical Analysis of Alkaline
Detergents.
26
40 ASTM D502 - 89(2009) ASTM D502 - 89(2009) Standard Test Method
for Particle Size of Soaps and Other Detergents.
2
41 ASTM D820 - 93(2009) ASTM D820 - 93(2009) Standard Test Methods
for Chemical Analysis of Soaps Containing
Synthetic Detergents.
10
42 ASTM D888 - 09 ASTM D888 - 09 Standard Test Methods for
Dissolved Oxygen in Water.
11
43 ASTM D928 - 03(2009) ASTM D928 - 03(2009) Standard Specification
for Sodium Bicarbonate
1
44 ASTM D953 - 09 ASTM D953 - 09 Standard Test Method for
Bearing Sength of Plastics.
6
45 ASTM D1055 - 09 ASTM D1055 - 09 Standard Specifications for
Flexible Cellular Materials-Latex Foam.
7
46 ASTM D1287 - 09 ASTM D1287 - 09 Standard Test Method for pH
of Engine Coolants and Antirusts.
4
47 ASTM D1570 - 95(2009) ASTM D1570 - 95(2009) Standard Test Methods
for Sampling and Chemical Analysis of Fatty
Alkyl Sulfates.
10
48 ASTM D1712 - 09 ASTM D1712 - 09 Standard Practice for
Resistance of Plastics to Sulfide Staining.
2
49 ASTM D1767 - 89(2009) ASTM D1767 - 89(2009) Standard Test Method
for Ethylene Diamine Teaacetate (EDTA) in
Soaps or Synthetic Detergents.
2
13
50 ASTM D1768 - 89(2009) ASTM D1768 - 89(2009) Standard Test Method
for Sodium Alkylbenzene Sulfonate in Synthetic
Detergents by Ulaviolet Absorption.
3
51
ASTM D1807 -
00(2005)e1
ASTM D1807 - 00(2005)e1 Standard Test
Methods for Refractive Index and Specific
Optical Dispersion of Elecical Insulating
Liquids..
3
52 ASTM D1896 - 09 ASTM D1896 - 09 Standard Practice for ansfer
Molding Test Specimens of Thermosetting
Compounds.
4
53 ASTM D2358 - 89(2009) ASTM D2358 - 89(2009) Standard Test Method
for Separation of Active Ingredient from
Surfactant and Syndet Compositions.
3
54 ASTM F977 - 09 ASTM F977 - 09 Standard Consumer Safety
Specification for Infant Walkers.
13
55 ASTM F1129 / F1129M -
09
ASTM F1129 / F1129M - 09 Standard Guide for
Using Aqueous Foams to Conol the Vapor
Hazard from Immiscible Volatile Liquids.
5
56 ASTM F1169 - 09 ASTM F1169 - 09 Standard Specification for
Full-Size Baby Crib.
8
57 ASTM F1789 - 09a ASTM F1789 - 09a Standard Terminology for
F16 Mechanical Fasteners.
13
58 ASTM F1880 - 09 ASTM F1880 - 09 Standard Test Method for the
Determination of Percent of Let-Off for Archery
Bows.
3
59 ASTM F2088 - 09 ASTM F2088 - 09 Standard Consumer Safety
Specification for Infant Swings.
8
60 ASTM F2199 - 09 ASTM F2199 - 09 Standard Test Method for
Determining Dimensional Stability of Resilient
Floor Tile after Exposure to Heat.
3
61 ASTM F2226 -
03(2009)e1
ASTM F2226 - 03(2009)e1 Standard Practice for
Determining the Adhesion of Prints and
Laminating Films.
6
62
ASTM F2248 - 09 ASTM F2248 - 09 Standard Practice for
Specifying an Equivalent 3-Second Duration
Design Loading for Blast Resistant Glazing
Fabricated with Laminated Glass.
4
63 ASTM F2397 - 09 ASTM F2397 - 09 Standard Specification for
Protective Headgear Used in Martial Arts.
5
14
64 ASTM F2774 - 09 ASTM F2774 - 09 Standard Practice for
Manufacturing Quality Conol of Consumer
ampoline Bed Material.
3
65 ASTM F2799 - 09 ASTM F2799 - 09 Standard Practice for
Maintenance of Airplane Elecical Wiring
Systems.
23
66 ASTM E1845 - 09 ASTM E1845 - 09 Standard Practice for
Calculating Pavement Macrotexture Mean Profile
Depth.
4
67
ASTM A787 / A787M -
09
ASTM A787 / A787M - 09 Standard
Specification for Elecic-Resistance-Welded
Metallic-Coated Carbon Steel Mechanical
Tubing.
9
68
ASTM B833 - 09 ASTM B833 - 09 Standard Specification for
Zinc and Zinc Alloy Wire for Thermal Spraying
(Metallizing) for the Corrosion Protection of
Steel.
5
69
ASTM B833 - 09 ASTM B833 - 09 Standard Specification for
Zinc and Zinc Alloy Wire for Thermal Spraying
(Metallizing) for the Corrosion Protection of
Steel.
5
70 ASTM C591 - 09 ASTM C591 - 09 Standard Specification for
Unfaced Preformed Rigid Cellular
Polyisocyanurate Thermal Insulation
6
71 ASTM C1224 - 09 ASTM C1224 - 09 Standard Specification for
Reflective Insulation for Building Applications.
6
72 ASTM C1540 - 09a ASTM C1540 - 09a Standard Specification for
Heavy Duty Shielded Couplings Joining Hubless
Cast Iron Soil Pipe and Fittings .
12
73
ASTM C1617 - 09 ASTM C1617 - 09 Standard Practice for
Quantitative Accelerated Laboratory Evaluation
of Exaction Solutions Containing Ions Leached
from Thermal Insulation on Aqueous Corrosion
of Metals.
10
74 ASTM D1000 - 09 ASTM D1000 - 09 Standard Test Methods for
Pressure-Sensitive Adhesive-Coated Tapes Used
for Elecical and Eleconic Applications.
20
75 ASTM D1119 - 05(2009) ASTM D1119 - 05(2009) Standard Test Method
for Percent Ash Content of Engine Coolants.
2
15
76 ASTM D1123 - 99(2009) ASTM D1123 - 99(2009) Standard Test Methods
for Water in Engine Coolant Concenate by the
Karl Fischer Reagent Method.
5
77 ASTM D1157 - 91(2009) ASTM D1157 - 91(2009) Standard Test Method
for Total Inhibitor Content (TBC) of Light
Hydrocarbons.
3
78
ASTM D1195 / D1195M -
09
ASTM D1195 / D1195M - 09 Standard Test
Method for Repetitive Static Plate Load Tests of
Soils and Flexible Pavement Components, for
Use in Evaluation and Design of Airport and
Highway Pavements.
3
79 ASTM D1550 - 94(2009) ASTM D1550 - 94(2009) Standard ASTM
Butadiene Measurement Tables.
16
80 ASTM D1881 - 97(2009) ASTM D1881 - 97(2009) Standard Test Method
for Foaming Tendencies of Engine Coolants in
Glassware
4
81 ASTM D2384 - 83(2009) ASTM D2384 - 83(2009) Standard Test Methods
for aces of Volatile Chlorides in Butane-Butene
Mixtures.
8
82 ASTM D2593 - 93(2009) ASTM D2593 - 93(2009) Standard Test Method
for Butadiene Purity and Hydrocarbon Impurities
by Gas Chromatography.
7
83 ASTM D2878 - 95(2009) ASTM D2878 - 95(2009) Standard Test Method
for Estimating Apparent Vapor Pressures and
Molecular Weights of Lubricating Oils.
6
84
ASTM D3568 - 03(2009) ASTM D3568 - 03(2009) Standard Test Methods
for Rubber—Evaluation of EPDM (Ethylene
Propylene Diene Terpolymers) Including
Mixtures With Oil.
5
85
ASTM D3848 - 03(2009) ASTM D3848 - 03(2009) Standard Test Methods
for Rubber—Evaluation of NBR (Acryloniile-
Butadiene Copolymers) Mixed With Carbon
Black.
5
86
ASTM D4294 - 08ae1 ASTM D4294 - 08ae1 Standard Test Method for
Sulfur in Peoleum and Peoleum Products by
Energy Dispersive X-ray Fluorescence
Specomey.
9
87
ASTM D4815 - 09 ASTM D4815 - 09 Standard Test Method for
Determination of MTBE, ETBE, TAME, DIPE,
tertiary-Amyl Alcohol and C1 to C4 Alcohols in
Gasoline by Gas Chromatography.
10
16
88 ASTM D5159 - 04(2009) ASTM D5159 - 04(2009) Standard Guide for
Dusting Atition of Granular Activated Carbon.
4
89 ASTM D5293 - 09 ASTM D5293 - 09 Standard Test Method for
Apparent Viscosity of Engine Oils Between -5
and -35°C Using the Cold-Cranking Simulator.
10
90 ASTM D5600 - 09 ASTM D5600 - 09 Standard Test Method for ace
Metals in Peoleum Coke by Inductively Coupled
Plasma Atomic Emission Specomey (ICP-AES).
4
91 ASTM D5799 - 95(2009) ASTM D5799 - 95(2009) Standard Test Method
for Determination of Peroxides in Butadiene.
3
92
ASTM D6201 - 04(2009) ASTM D6201 - 04(2009) Standard Test Method
for Dynamometer Evaluation of Unleaded Spark-
Ignition Engine Fuel for Intake Valve Deposit
Formation.
28
93
ASTM D6421 - 99a(2009) ASTM D6421 - 99a(2009) Standard Test
Method for Evaluating Automotive Spark-
Ignition Engine Fuel for Eleconic Port Fuel
Injector Fouling by Bench Procedure.
9
94 ASTM E906 - 09 ASTM E906 - 09 Standard Test Method for Heat
and Visible Smoke Release Rates for Materials
and Products Using a Thermopile Method.
26
95
ASTM E950 / E950M - 09 ASTM E950 / E950M - 09 Standard Test
Method for Measuring the Longitudinal Profile of
aveled Surfaces with an Accelerometer
Established Inertial Profiling Reference.
6
96 ASTM E1994 - 09 ASTM E1994 - 09 Standard Practice for Use of
Process Oriented AOQL and LTPD Sampling
Plans
24
97 ASTM E2311 - 04(2009) ASTM E2311 - 04(2009) Standard Practice for
QCM Measurement of Spacecraft Molecular
Contamination in Space.
22
98 ASTM E2590 - 09 ASTM E2590 - 09 Standard Guide for
Conducting Hazard Analysis-Critical Conol Point
(HACCP) Evaluations.
18
99
ASTM F606 -09 ASTM F606 - 09 Standard Test Methods for
Determining the Mechanical Properties of
Externally and Internally Threaded Fasteners,
Washers, Direct Tension Indicators, and Rivets.
15
17
100
ASTM E885-88(2004) Withdrawn Standard: ASTM E885-88(2004)
Standard Test Methods for Analyses of Metals in
Refuse-Derived Fuel by Atomic Absorption
Specoscopy (Withdrawn 2009).
27
101
ASTM C1321 - 09 ASTM C1321 - 09 Standard Practice for
Installation and Use of Interior Radiation Conol
Coating Systems (IRCCS) in Building
Consuction.
3
102 ASTM B505 / B505M -09 ASTM B505 / B505M - 09 Standard
Specification for Copper Alloy Continuous
Castings.
10
103 ASTM B579 - 73(2009) ASTM B579 - 73(2009) Standard Specification
for Elecodeposited Coatings of Tin-Lead Alloy
(Solder Plate).
5
104 ASTM B605 - 95a(2009) ASTM B605 - 95a(2009) Standard Specification
for Elecodeposited Coatings of Tin-Nickel Alloy
6
105 ASTM B634 - 88(2009) ASTM B634 - 88(2009) Standard Specification
for Elecodeposited Coatings of Rhodium for
Engineering Use.
5
106 ASTM B888 - 09 ASTM B888 - 09 Standard Specification for
Copper Alloy Sip for Use in Manufacture of
Elecical Connectors or Spring Contacts.
15
107
ASTM C1198 - 09 ASTM C1198 - 09 Standard Test Method for
Dynamic Young's Modulus, Shear Modulus, and
Poisson's Ratio for Advanced Ceramics by Sonic
Resonance.
11
108 ASTM D71 - 94(2009) ASTM D71 - 94(2009) Standard Test Method for
Relative Density of Solid Pitch and Asphalt
(Displacement Method) .
2
109 ASTM D1598 - 02(2009) ASTM D1598 - 02(2009) Standard Test Method
for Time-to-Failure of Plastic Pipe Under
Constant Internal Pressure.
4
110 ASTM D1832 - 04(2009) ASTM D1832 - 04(2009) Standard Test Method
for Peroxide Number of Peoleum Wax
3
111
ASTM D2502 - 04(2009) ASTM D2502 - 04(2009) Standard Test Method
for Estimation of Molecular Weight (Relative
Molecular Mass) of Peoleum Oils From Viscosity
Measurements.
4
112 ASTM D2714 - 94(2009) ASTM D2714 - 94(2009) Standard Test Method
for Calibration and Operation of the Falex Block-
on-Ring Friction and Wear Testing Machine.
4
18
113 ASTM D2717 - 95(2009) ASTM D2717 - 95(2009) Standard Test Method
for Thermal Conductivity of Liquids.
4
114 ASTM D2764 - 99(2009) ASTM D2764 - 99(2009) Standard Test Method
for Dimethylformamide-Insoluble (DMF-I)
Content of Tar and Pitch.
3
115 ASTM D2883 - 95(2009) ASTM D2883 - 95(2009) Standard Test Method
for Reaction Threshold Temperature of Liquid
and Solid Materials.
10
116 ASTM D2893 - 04(2009) ASTM D2893 - 04(2009) Standard Test Method
for Oxidation Characteristics of Exeme-Pressure
Lubrication Oils.
3
117 ASTM D3115 - 95(2009) ASTM D3115 - 95(2009) Standard Test Method
for Explosive Reactivity of Lubricants with
Aerospace Alloys Under High Shear.
3
118 ASTM D3236 - 88(2009) ASTM D3236 - 88(2009) Standard Test Method
for Apparent Viscosity of Hot Melt Adhesives
and Coating Materials.
8
119
ASTM D3702 - 94(2009) ASTM D3702 - 94(2009) Standard Test Method
for Wear Rate and Coefficient of Friction of
Materials in Self-Lubricated Rubbing Contact
Using a Thrust Washer Testing Machine.
5
120 ASTM D3703 - 07e1 ASTM D3703 - 07e1 Standard Test Method for
Hydroperoxide Number of Aviation Turbine
Fuels, Gasoline and Diesel Fuels.
5
121
ASTM D4683 - 09 ASTM D4683 - 09 Standard Test Method for
Measuring Viscosity of New and Used Engine
Oils at High Shear Rate and High Temperature by
Tapered Bearing Simulator Viscometer at 150 °C.
11
122
ASTM D4742 - 08e1 ASTM D4742 - 08e1 Standard Test Method for
Oxidation Stability of Gasoline Automotive
Engine Oils by Thin-Film Oxygen Uptake
(TFOUT)
11
123 ASTM D4893 - 94(2009) ASTM D4893 - 94(2009) Standard Test Method
for Determination of Pitch Volatility.
6
124
ASTM D5660 - 96(2009) ASTM D5660 - 96(2009) Standard Test Method
for Assessing the Microbial Detoxification of
Chemically Contaminated Water and Soil Using a
Toxicity Test with a Luminescent Marine
Bacterium.
9
19
125
ASTM D5929 - 96(2009) ASTM D5929 - 96(2009) Standard Test Method
for Determining Biodegradability of Materials
Exposed to Municipal Solid Waste Composting
Conditions by Compost Respiromey.
6
126 ASTM D6081 - 98(2009) ASTM D6081 - 98(2009) Standard Practice for
Aquatic Toxicity Testing of Lubricants: Sample
Preparation and Results Interpretation.
7
127
ASTM D6121 - 09 ASTM D6121 - 09 Standard Test Method for
Evaluation of Load-Carrying Capacity of
Lubricants Under Conditions of Low Speed and
High Torque Used for Final Hypoid Drive Axles.
18
128
ASTM D6311 - 98(2009) ASTM D6311 - 98(2009) Standard Guide for
Generation of Environmental Data Related to
Waste Management Activities: Selection and
Optimization of Sampling Design.
25
129
ASTM D6346 - 98(2009) ASTM D6346 - 98(2009) Standard Guide for
Accepting, Segregating and Packaging Materials
Collected Through Household Hazardous Waste
Programs.
3
130 ASTM E889 - 82(2009) ASTM E889 - 82(2009) Standard Test Method
for Composition or Purity of a Solid Waste
Materials Seam.
4
131 ASTM E929 - 83(2009) ASTM E929 - 83(2009) Standard Test Method
for Measuring Elecical Energy Requirements of
Processing Equipment.
7
132 ASTM E1109 - 86(2009) ASTM E1109 - 86(2009) Standard Test Method
for Determining the Bulk Density of Solid Waste
Fractions.
3
133 ASTM E2408 - 04(2009) ASTM E2408 - 04(2009) Standard Test Method
for Relative Extensional Viscosity of Agricultural
Spray Tank Mixes.
4
134 ASTM F2433 - 05(2009) ASTM F2433 - 05(2009) Standard Test Method
for Determining Thermoplastic Pipe Wall
Stiffness.
6
135 ASTM E2470 - 09 ASTM E2470 - 09 Standard Specification for
Polyester Grade Ethylene Glycol.
2
136 ASTM E2664 - 09a ASTM E2664 - 09a Standard Test Method for
Methanol Wall Wash of Marine Vessels Handling
Polyester Grade Monoethylene Glycol.
6
20
137
ASTM F1704 - 09 ASTM F1704 - 09 Standard Test Method for
Capture and Containment Performance of
Commercial Kitchen Exhaust Ventilation
Systems.
13
138 ASTM F2291 - 09b ASTM F2291 - 09b Standard Practice for Design
of Amusement Rides and Devices.
51
139 ASTM F2474 - 09 ASTM F2474 - 09 Standard Test Method for
Heat Gain to Space Performance of Commercial
Kitchen Ventilation/Appliance Systems.
17
140 ASTM D2649 - 04(2009) ASTM D2649 - 04(2009) Standard Test Method
for Corrosion Characteristics of Solid Film
Lubricants.
3
Tiêu chuẩn IEC
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 IEC/ISO 31010 ed1.0 Risk management - Risk assessment techniques. 188
2 Project IEC 60034-18-1
ed2.0
Rotating elecical machines - Part 18-1:
Functional evaluation of insulation systems -
General guidelines.
113
3 Project IEC 60079-25
ed2.0
Explosive atmospheres - Part 25: Ininsically safe
elecical systems.
345
4 Project IEC 60081-am4
ed5.0
Amendment 4 - Double-capped fluorescent lamps
- Performance specifications.
233
5
Project IEC 60191-6-19
ed1.0
Mechanical standardization of semiconductor
devices - Part 6-19: Measurement methods of the
package warpage at elevated temperature and the
maximum permissible warpage.
90
6
Project IEC 60335-2-24
ed7.0
Household and similar elecical appliances -
Safety - Part 2-24: Particular requirements for
refrigerating appliances, ice-cream appliances and
ice-makers
300
7
Project IEC 60335-2-89
ed2.0
Household and similar elecical appliances -
Safety - Part 2-89: Particular requirements for
commercial refrigerating appliances with an
incorporated or remote refrigerant condensing
unit or compressor.
263
8 Project IEC 60456 ed5.0 Clothes washing machines for household use -
Methods for measuring the performance.
405
21
9
IEC 60502-SER ed1.0 Power cables with exuded insulation and their
accessories for rated voltages from 1 kV (Um =
1,2 kV) up to 30 kV (Um = 36 kV) - ALL
PARTS.
328
10 Project IEC 60598-2-20
ed3.0
Luminaires - Part 2-20: Particular requirements -
Lighting chains.
143
11 Project IEC 60601-1-6
ed3.0
Medical elecical equipment - Part 1-6: General
requirement for basic safety and essential
performance - Collateral standard: Usability.
173
12
Project IEC 60603-7-41
ed1.0
Connectors for eleconic equipment - Part 7-41:
Detail specification for 8-way, unshielded, free
and fixed connectors, for data ansmission with
frequencies up to 500 MHz.
98
13
Project IEC 60603-7-41
ed1.0
Connectors for eleconic equipment - Part 7-41:
Detail specification for 8-way, unshielded, free
and fixed connectors, for data ansmission with
frequencies up to 500 MHz.
98
14
Project IEC 60603-7-51
ed1.0
Connectors for eleconic equipment - Part 7-51:
Detail specification for 8-way, shielded, free and
fixed connectors, for data ansmission with
frequencies up to 500 MHz.
98
15 Project IEC 60613 ed3.0 Elecical and loading characteristics of X-ray tube
assemblies for medical diagnosis.
143
16 Project IEC 60704-1 ed3.0 Household and similar elecical appliances - Test
code for the determination of airborne noise - Part
1: General requirements.
210
17 Project IEC 60747-14-5
ed1.0
Semiconductor devices - Part 14-5:
Semiconductor sensors - PN-junction
semiconductor temperature sensor.
143
18 Project IEC 60832-1 ed1.0 Live working - Insulating sticks and attachable
devices - Part 1: Insulating sticks.
263
19 Project IEC 60832-2 ed1.0 Live working - Insulating sticks and attachable
devices - Part 2: Attachable devices.
345
20 Project IEC 62282-6-100
ed1.0
Fuel cell technologies - Part 6-100: Micro fuel
cell power systems - Safety.
462
21 Project IEC 62439-1 ed2.0 Indusial communication networks - High
availability automation networks - Part 1: General
concepts and calculation methods.
300
22 Project IEC 62439-2 ed2.0 Indusial communication networks - High
availability automation networks - Part 2: Media
Redundancy Protocol (MRP).
345
22
23
Project IEC 62439-3 ed2.0 Indusial communication networks - High
availability automation networks - Part 3: Parallel
Redundancy Protocol (PRP) and High-
availability Seamless Redundancy (HSR).
300
24 Project IEC 62439-4 ed2.0 Indusial communication networks - High
availability automation networks - Part 4: Cross-
network Redundancy Protocol (CRP).
263
25 Project IEC 62439-5 ed2.0 Indusial communication networks - High
availability automation networks - Part 5: Beacon
Redundancy Protocol (BRP).
263
26 Project IEC 62439-6 ed2.0 Indusial communication networks - High
availability automation networks - Part 6:
Disibuted Redundancy Protocol (DRP).
345
27 IEC 60079-29-4 ed1.0 Explosive atmospheres - Part 29-4: Gas detectors
- Performance requirements of open path
detectors for flammable gases.
67
28 IEC 60092-306 ed4.0 Elecical installations in ships - Part 306:
Equipment - Luminaires and lighting accessories.
18
29
IEC 60191-6 ed3.0 Mechanical standardization of semiconductor
devices - Part 6: General rules for the preparation
of outline drawings of surface mounted
semiconductor device packages.
76
30 IEC 60335-2-30 ed5.0 Household and similar elecical appliances -
Safety - Part 2-30: Particular requirements for
room heaters.
30
31 IEC 60335-2-59 ed3.2
Consol. with am1&2
Household and similar elecical appliances -
Safety - Part 2-59: Particular requirements for
insect killers.
33
32 IEC 60335-2-73 ed2.2
Consol. with am1&2
Household and similar elecical appliances -
Safety - Part 2-73: Particular requirements for
fixed immersion heaters.
24
33 IEC 60335-2-74 ed2.2
Consol. with am1&2
Household and similar elecical appliances -
Safety - Part 2-74: Particular requirements for
portable immersion heaters.
21
34
IEC 60404-3-am2 ed2.0 Amendment 2 - Magnetic materials - Part 3:
Methods of measurement of the magnetic
properties of elecical steel sip and sheet by means
of a single sheet tester.
13
35 IEC 60436 ed3.1 Consol.
with am1
Elecic dishwashers for household use - Methods
for measuring the performance.
65
23
36
IEC 60502-1 ed2.1
Consol. with am1
Power cables with exuded insulation and their
accessories for rated voltages from 1 kV (Um =
1,2 kV) up to 30 kV (Um = 36 kV) - Part 1:
Cables for rated voltages of 1 kV (Um = 1,2 kV)
and 3 kV (Um = 3,6 kV).
110
37 IEC 60587 ed3.0 Elecical insulating materials used under severe
ambient conditions - Test methods for evaluating
resistance to acking and erosion.
28
38 IEC 60695-1-10 ed1.0 Fire hazard testing - Part 1-10: Guidance for
assessing the fire hazard of elecotechnical
products - General guidelines.
34
39 IEC 60747-5-2 ed1.1
Consol. with am1
Discrete semiconductor devices and integrated
circuits - Part 5-2: Optoeleconic devices -
Essential ratings and characteristics.
62
40 IEC 60747-5-3 ed1.1
Consol. with am1
Discrete semiconductor devices and integrated
circuits - Part 5-3: Optoeleconic devices -
Measuring methods.
86
41 IEC 60851-1-am2 ed2.0 Amendment 2 - Winding wires - Test methods -
Part 1: General.
5
42
IEC 60893-3-6 ed2.1
Consol. with am1
Insulating materials - Indusial rigid laminated
sheets based on thermosetting resins for elecical
purposes - Part 3-6: Specifications for individual
materials - Requirements for rigid laminated
sheets based on silicone resins.
24
43
IEC 60893-3-7 ed2.1
Consol. with am1
Insulating materials - Indusial rigid laminated
sheets based on thermosetting resins for elecical
purposes - Part 3-7: Specifications for individual
materials - Requirements for rigid laminated
sheets based on polyimide resins.
24
44 IEC 60917-1 ed1.1
Consol. with am1
Modular order for the development of mechanical
suctures for eleconic equipment practices - Part 1:
Generic standard.
48
45
IEC 61000-4-34 ed1.1
Consol. with am1
Elecomagnetic compatibility (EMC) - Part 4-34:
Testing and measurement techniques - Voltage
dips, short interruptions and voltage variations
immunity tests for equipment with mains current
more than 16 A per phase.
66
46 IEC 61243-3 ed2.0 Live working - Voltage detectors - Part 3: Two-
pole low-voltage type.
144
24
47
IEC 61280-1-4 ed2.0 Fibre optic communication subsystem test
procedures - Part 1-4: General communication
subsystems - Light source encircled flux
measurement method.
71
48
IEC 61300-3-35 ed1.0 Fibre optic interconnecting devices and passive
components - Basic test and measurement
procedures - Part 3-35: Examinations and
measurements - Fibre optic connector endface
visual and automated inspection.
21
49 IEC 61753-111-7 ed1.0 Fibre optic interconnecting devices and passive
components performance standard - Part 111-7:
Sealed closures for category A - Aerial.
46
50 IEC 61753-111-8 ed1.0 Fibre optic interconnecting devices and passive
components performance standard - Part 111-8:
Sealed closures for category G - Ground.
44
51 IEC 61753-111-9 ed1.0 Fibre optic interconnecting devices and passive
components performance standard - Part 111-9:
Sealed closures for category S - Subterranean.
49
52 IEC/ 61916 ed2.0 Elecical accessories - Harmonization of general
rules.
46
53
IEC 61978-1 ed2.0 Fibre optic interconnecting devices and passive
components - Fibre optic passive chromatic
dispersion compensators - Part 1: Generic
specification.
55
54 IEC 61988-5 ed1.0 Plasma display panels - Part 5: Generic
specification.
46
55
IEC 62150-4 ed1.0 Fibre optic active components and devices - Test
and measurement procedures - Part 4: Relative
intensity noise using a time-domain optical
detection system.
14
56
IEC/ 62271-305 ed1.0 High-voltage switchgear and conolgear - Part
305: Capacitive current switching capability of
air-insulated disconnectors for rated voltages
above 52 kV.
17
57 IEC 62341-5 ed1.0 Organic light emitting diode (OLED) displays -
Part 5: Environmental testing methods.
29
58
IEC 62423 ed2.0 Type F and type B residual current operated
circuit-breakers with and without integral
overcurrent protection for household and similar
uses.
74
25
59 IEC/ 62540 ed1.0 Radio frequency identification (RFID) for
stationary lead acid cells and monoblocs -
Tentative requirements.
21
60 IEC/TS 62578 ed1.0 Power eleconics systems and equipment -
Operation conditions and characteristics of active
infeed converter applications.
63
61
IEC/PAS 61753-1-3 ed1.0 Fibre optic interconnecting devices and passive
components performance standard - Part 1-3:
General and guidance for performance standards -
Single-mode fibre optic connector performance
for harsh indusial operating conditions.
21
62 IEC/F cispr-15 ed2.0 This Test Report Form applies to CISPR 15:2005
(Seventh Edition) + A1:2006 + A2:2008.
550
63
IEC/F 60335-2-40 ed5.0 This Test Report Form applies to IEC 60335 2
40:2002 (4. Edition) + A1:2005 (incl.
Corr.1:2006) + A2:2005 with IEC 60335 1:2001
(4. Edition) (incl. Corr.1:2002) + A1:2004 (incl.
Corr.1:2005) + A2:2006 (incl. Corr.1:2006) IEC
62233:2005 (1. Edition).
550
64 IEC/F 60570 ed2.0 This Test Report Form applies to IEC
60570:2003 used in conjunction with IEC 60598-
1:2008.
550
65
IEC/F 60745-2-2 ed6.0 This Test Report Form applies to IEC 60745-2-
2:2003 (Second Edition) +A1:2008 used in
conjunction with IEC 60745-1:2006 - Edition 4.1
(Fourth Edition).
550
66
IEC/F 60745-2-6 ed7.0 This Test Report Form applies to IEC 60745 2-
6:2003 (Second Edition) + A1:2006 + A2:2008,
used in conjunction with IEC 60745-1:2006
(Fourth Edition).
550
67
IEC/F 61558-2-4 ed2.0 This Test Report Form applies to IEC 61558-2-
4:2009 (Second Edition) Used in conjunction
with IEC 61558-1:2005 (Second Edition) +
A1:2009.
550
68
IEC/F 61558-2-6 ed2.0 This Test Report Form applies to IEC 61558-2-
6:2009 (Second Edition) Used in conjunction
with IEC 61558-1:2005 (Second Edition) +
A1:2009.
550
69 IEC/F 62040-1 ed1.0 This Test Report Form applies to IEC 62040 1 :
2008 (1st Edition).
550
26
Thư viện Đại học Công Nghiệp TP.HCM đã ký hợp đồng cung cấp thông tin trọn gói với Trung tâm thông tin khoa
học và công nghệ TP.HCM, toàn thể sinh viên, giảng viên và cán bộ nhân viên trong trường có nhu cầu tra cứu thông
tin xin liên hệ trực tiếp:
Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
Địa chỉ: 79 Trương Định - Q1 - TP.HCM
ĐT: (08)38243826: (08)38297040 Ext: 202 -203-216) Fax: 38291957
Website: www.sesti.gov.vn Email: [email protected]
Lưu ý
1/: Cung cấp thông tin miễn phí (chỉ thanh toán tiền photocopy và giấy in) khi đến gửi yêu cầu thông tin, nhớ mang theo
thẻ sinh viên và thẻ giảng viên.
2/ Nếu bạn đọc không thể đến Trung tâm thông tin khoa học và công nghệ TP.HCM - hãy gửi yêu cầu thông tin cho
Thư viện Đại học Công Nghiệp TP.HCM.
Liên hệ: Thủ thư Phòng Đa phương tiện.
Mọi chi tiết xin liên hê Thư viện ĐHCN TP.HCM.
ĐT: (08)38940390 (130 - 131 -132)
Email: [email protected] - [email protected]
.