Upload
dangdang
View
220
Download
2
Embed Size (px)
Citation preview
TENDER ENQUIRY OFFICE COPY
( This is only a Price Enquiry not a Purchase Order )
Tender No. : 9000845 - HA - 48002Tender Date 12/11/2009 :
Direct Queries to MANJUSRI MADDALA :
Deputy Manager - PurchaseDesignation : :Department MATERIALS MR FUELS : 022 - 25076000Telephone No. :Fax No. 022 - 25077201/25541054
P R No. 902749 - HS - 48050 :
Annual rate contract for supply of Mechanical SealSpares for LR
Title :
23/11/2009 by 13:30 Hrs at the address Mentioned below.1. Tender to be received on or before
Tenders are to be dropped in the designated tender box at the address mentioned below. In situations where the
tenders are big, which cannot be dropped in the box or where the specific tender boxes are not available,
tenders are to be submitted with the concerned purchasing authority at the following address.
Tenders received after due date & time due to whatever reasons will be rejected.
Materials Department -Mumbai Refinery
Hindustan Petroleum Corporation Limited
BD Patil Marg
Old Corridor Road
Chembur
MUMBAI - 400074
Maharashtra
India
2. HPCL has developed a Grievance Redressal Mechanism, details of which are availiable
on the Corporation web site.
3. Schedule of rates are in INR unless otherwise specified.
Cont on next page . . 9000845 - HA - 48002
Page 1 ofSign and Seal of the Tenderer 129
4. Vendor to quote '+' / '-' / Zero % on the Schedule of rates (A) mentioned in the following table.
5. Only single % is to be quoted for the complete set of items/Services and not item /Service wise.
Specifying more than single percentage (%) or quoting specific unit rates / Lumpsum rates
will make your offer rejected.
6. Prefix the % with, '+' for rates above the scheduled rate, '-' for rates below the scheduled rate.
Put Zero % if the scheduled rate itself are being offered.
7. The % is to be put in the space provided below the following table, both in figures and in words.
Please quote for the following items/service, as per the terms and conditions mentioned below and in
attachments :
DETAILS OF ITEMS / SERVICES
Deliver To : WAREHOUSE, MUMBAI REFINERY,HINDUSTAN PETROLEUM CORP. LTD.,MUMBAI, - 400074.Maharashtra India.
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
1 2.000 13400130 8117.69 Each
Item Description:
Snap Ring Primary Seal [1} Part No. 111 , SS 316 , , Make : Flowserve Sanmar, Type:Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 ,API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2 3.000 6065.29 Set
Item Description:
Set screws Secondary Seal [6nos] Set Part No. 57 , SS 316 , Make : Flowserve Sanmar,Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No.2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Cont on next page . . 9000845 - HA - 48002
Page 2 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3 4.000 6065.29 Set
Item Description:
Set Screws Primary Seal [6nos] Set Part No. 57.1 , SS 316 , Make : Flowserve Sanmar,Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No.2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4 5.000 2603.79 Each
Item Description:
Retaining Ring [1] , Part No. 54, SS 316 , Make : Flowserve Sanmar, Type :TandemInside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 , APIPlan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5 6.000 6065.29 Set
Item Description:
Set Cap Screws Primary Seal [6nos] Set Part No. 40.1 , SS 316 , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 3 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6 7.000 6065.29 Set
Item Description:
Set Cap screws Secondary Seal [6nos] Set Part No. 40 , SS 316 , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7 8.000 33696.08 Each
Item Description:
Sleeve [1], Part No. 1, SS 316., Make : Flowserve Sanmar, Type :Tandem Inside BXHH /BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 , API Plan 02 52, SteamJacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8 9.000 16097.54 Each
Item Description:
Sleeve Gasket [1 ],Part No. 19, Annealed SS, Make : Flowserve Sanmar, Type :TandemInside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 , APIPlan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 4 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
9 10.000 16097.54 Each
Item Description:
Flange Gassket Primary Seal [1] , Part No. 18.1 , 316/Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10 11.000 16097.54 Each
Item Description:
Flange Gassket Secondary Seal [1] ,Part No. 18. , 316/Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
11 12.000 33634.81 Each
Item Description:
Flange Secondary Seal [1] , Part No. 11, SS 316 , Make : Flowserve Sanmar, Type:Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 ,API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
12 13.000 33634.81 Each
Cont on next page . . 9000845 - HA - 48002
Page 5 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Flange Primary Seal [1] , Part No. 11.1 , SS 316 , Make : Flowserve Sanmar, Type:Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 ,API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
13 14.000 16097.54 Each
Item Description:
Gasket Rotary Face Primary Seal [1] , Part No. 152.1 , Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
14 15.000 16097.54 Each
Item Description:
Gasket Rotary Face Secondary Seal [1] , Part No. 152. , Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
15 16.000 359230.85 Each
Item Description:
Bellow Assembly/Seal Ring Primary Seal [1], Part No.79.1, 316 Alloy 718/High Chrome
Cont on next page . . 9000845 - HA - 48002
Page 6 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Alloy/Carbon, Make:Flowserve, Type:Tandem Inside BXHH / BXH Size: 2.625'', Matcode:HPCX / APCX Drg.# 2H-89727, API Plan 02 52, Steam Jacketed Stuffing/Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
16 17.000 359230.85 Each
Item Description:
Bellow Assembly/Seal Ring Secondary Seal [1] , Part No.79 , Alloy C-276 Carbon, Make: Flowserve Sanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code:HPCX /APCX Drg.No. 2H-89727, API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
17 18.000 55721.06 Each
Item Description:
Insert / Stationary Face Primary Seal [1] , Part No.14.1, Silicar , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
18 19.000 55721.06 Each
Item Description:
Insert / Stationary Face Secondary Seal [1] , Part No.14., Silicar, Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Cont on next page . . 9000845 - HA - 48002
Page 7 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
19 20.000 16097.54 Each
Item Description:
Seat Gasket [ Stationary ] Primary Face [1] , Part No.13.1Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
20 21.000 16097.54 Each
Item Description:
Seat Gasket [ Stationary ] Secondary Face [1] , Part No.13.Grafoil , Make : FlowserveSanmar, Type :Tandem Inside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCXDrg.No. 2H-89727 , API Plan 02 52, Steam Jacketed Stuffing / Box
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
21 22.000 22239.41 Each
Item Description:
Pumping Screw [1] , Part No. 90, Bronze., Make : Flowserve Sanmar, Type :TandemInside BXHH / BXH Size: 2.625'', Maerial code: HPCX / APCX Drg.No. 2H-89727 , APIPlan 02 52, Steam Jacketed Stuffing / Box
Cont on next page . . 9000845 - HA - 48002
Page 8 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
22 23.000 13512.13 Each
Item Description:
Seat Gasket P/N-S13-Grafoil, Single Inside Cartridge '' BXHH'', Make-FlowserveSanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
23 24.000 38918.97 Each
Item Description:
Stationary Face P/N-14-Sil Car, Single Inside Cartridge '' BXHH'', Make-FlowserveSanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
24 25.000 315732.27 Each
Item Description:
Bellow Assembly/Seal Face -316 Alloy/ High Chrome Alloy/Carbon-With Coller, Cap & SetScrew-P/N-79,2,40,57., Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 9 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
25 26.000 13512.13 Each
Item Description:
Gasket P/N-152-Grafoil, Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
26 27.000 28085.69 Each
Item Description:
Seal Flange(Gland Ring)With Seating Plate & Hex Bolts P/N-11,103 &40-1., SingleInside Cartridge '' BXHH'', Make-Flowserve Sanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
27 28.000 4498.43 Each
Item Description:
Floting Throtal Bush P/N-24, Single Inside Cartridge '' BXHH'', Make-FlowserveSanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
28 29.000 1415.23 Each
Item Description:
Spring Set(4Nos) P/N-16, Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Cont on next page . . 9000845 - HA - 48002
Page 10 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
29 30.000 758.16 Each
Item Description:
Snap Ring (Fl Thr.Bush)P/N-111-1, Single Inside Cartridge '' BXHH'', Make-FlowserveSanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
30 31.000 791.86 Each
Item Description:
Snap Ring (Stat Face)P/N-111, Single Inside Cartridge '' BXHH'', Make-FlowserveSanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
31 32.000 623.38 Each
Item Description:
Retaining Ring Part No.54., Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 11 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
32 33.000 31185.72 Each
Item Description:
Cartridge Sleeve With Collar,Set Screw,Hex Bolts P/N-1,58,57-1 & 40-2, Single InsideCartridge '' BXHH'', Make-Flowserve Sanmar, (A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
33 34.000 13512.13 Each
Item Description:
Sleeve Gasket P/N-19, Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
34 35.000 7868.04 Each
Item Description:
Stub Sleeve P/N-1-1, Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
35 36.000 13512.13 Each
Item Description:
Flange Gasket P/N-18., Single Inside Cartridge '' BXHH'', Make-Flowserve Sanmar,(A-1064) 2.625'' Dwg No-2H-79812
Cont on next page . . 9000845 - HA - 48002
Page 12 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
36 37.000 16409.99 Each
Item Description:
Complete mechanical seal, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
37 38.000 3891.9 Each
Item Description:
Insert carbon, P/N-2, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
38 39.000 9872.95 Each
Item Description:
Seal ring, tungcar-62-6, P/N-3, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
39 40.000 421.2 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 13 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Insert mounting, duraflon, P/N-7, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
40 41.000 370.66 Each
Item Description:
Shaft packing pair of 2, duraflon, P/N-P, Dura seal, 1.375" EU5--TT, Drawing No. -2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
41 42.000 3032.65 Each
Item Description:
Compression unit P/N-4,5 & E/D/C/S, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
42 43.000 370.66 Each
Item Description:
Sleeve packing, P/N-11, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 14 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
43 44.000 6284.31 Each
Item Description:
Gland ring, P/N-1, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
44 45.000 2156.54 Each
Item Description:
Throttle bush, P/N-B, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
45 46.000 370.66 Each
Item Description:
Gasket for gland, P/N-G, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
46 47.000 3361.95 Each
Item Description:
Sleeve, P/N-10, Dura seal, 1.375" EU5--TT, Drawing No. - 2H-54257
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 15 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
47 48.000 9986.29 Each
Item Description:
Insert # 5Carbon, P/N- 2, Seal Make - Flowserve Sanmar, Type - 70MM special SPTOseal:DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
48 49.000 45872.62 Each
Item Description:
Seal Ring: Tungsten Carbide 62-6, P/N-3, Seal Make - Flowserve Sanmar, Type - 70MMspecial SPTOseal: DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
49 50.000 3829.1 Each
Item Description:
Insert Mounting: Viton: P/N-6, Seal Make - Flowserve Sanmar, Type - 70MM specialSPTOseal: DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
50 51.000 24368.39 Each
Item Description:
Sleeve : SS316 : P/N-10, Seal Make - Flowserve Sanmar, Type - 70MM special SPTOseal:
Cont on next page . . 9000845 - HA - 48002
Page 16 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
51 52.000 689.24 Each
Item Description:
Sleeve Packing : Viton : P/N- 11, Seal Make - Flowserve Sanmar, Type - 70MM specialSPTOseal: DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
52 53.000 1493.35 Each
Item Description:
Shaft Packing: Viton: P/N-P, Seal Make - Flowserve Sanmar, Type - 70MM specialSPTOseal: DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
53 54.000 15837.16 Each
Item Description:
Compresson Unit: SS316: P/N- 45, Seal Make - Flowserve Sanmar, Type - 70MM specialSPTOseal: DRG.NO. 2H-76394
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 17 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
54 55.000 13401121 16707.6 Each
Item Description:
Dura seal P/N-10, drg. no. 2H-15851Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
55 56.000 24513.9 Each
Item Description:
Complete Mech. Seal, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/V VV,Seal Dwg-2H-15851
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
56 57.000 15331.72 Each
Item Description:
Seal Ring Mech Seal, P/N-3, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSEF/V VV, Seal Dwg-2H-15851
SPARES FOR P-201 C & P-3201 MFG-BHARAT PUMPS & COMPRESSORS LTD. NAINI, ALLAHABAD BPCS/O NO 514-01, PUMP SIZE- SMK IV 2X3X11-2STAG OLD ORDER NO. R-0151/LI-TS-1202/HLD, DT11-9-1979. DWG,NO. 3CP 10598 CAPACITY -M3/H-33 SUCTION FLANGE SIZE -/MECH. SEAL FORP-201 C,DURA SEAL, SIZE:- 2.250, INSIDE P.T.O. SEAL, INSIDE P.T.O. SEAL CODE NO.EMSEF/V V V DWG NO 2H-15851/SEAL RING TUNG CAR "M" P/NO 3Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
57 58.000 4464.73 Each
Cont on next page . . 9000845 - HA - 48002
Page 18 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Insert, P/N-2, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/V VV, SealDwg-2H-15851
SPARES FOR P-201 C & P-3201 MFG-BHARAT PUMPS & COMPRESSORS LTD. NAINI, ALLAHABAD BPCS/O NO 514-01, PUMP SIZE- SMK IV 2X3X11-2STAG OLD ORDER NO. R-0151/LI-TS-1202/HLD, DT11-9-1979. DWG,NO. 3CP 10598 CAPACITY -M3/H-33 SUCTION FLANGE SIZE -/MECH. SEAL FORP-201 C,DURA SEAL, SIZE:- 2.250, INSIDE P.T.O. SEAL, INSIDE P.T.O. SEAL CODE NO.EMSEF/V V V DWG NO 2H-15851/INSERT (CARBON 5%) P/NO 2Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
58 59.000 13401144 438.05 Each
Item Description:
Insert Mounting, P/N-6, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/VVV, Seal Dwg-2H-15851
SPARES FOR P-201 C & P-3201 MFG-BHARAT PUMPS & COMPRESSORS LTD. NAINI, ALLAHABAD BPCS/O NO 514-01, PUMP SIZE- SMK IV 2X3X11-2STAG OLD ORDER NO. R-0151/LI-TS-1202/HLD, DT11-9-1979. DWG,NO. 3CP 10598 CAPACITY -M3/H-33 SUCTION FLANGE SIZE -/MECH. SEAL FORP-201 C,DURA SEAL, SIZE:- 2.250, INSIDE P.T.O. SEAL, INSIDE P.T.O. SEAL CODE NO.EMSEF/V V V DWG NO 2H-15851/INSERT MTG P/NO 6Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
59 60.000 134.78 Set
Item Description:
Spring, P/N-C, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/V VV, SealDwg-2H-15851
Cont on next page . . 9000845 - HA - 48002
Page 19 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
60 61.000 13401146 438.05 Each
Item Description:
Shaft Packing, P/N-P, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/V VV,Seal Dwg-2H-15851
SPARES FOR P-201 C & P-3201 MFG-BHARAT PUMPS & COMPRESSORS LTD. NAINI, ALLAHABAD BPCS/O NO 514-01, PUMP SIZE- SMK IV 2X3X11-2STAG OLD ORDER NO. R-0151/LI-TS-1202/HLD, DT11-9-1979. DWG,NO. 3CP 10598 CAPACITY -M3/H-33 SUCTION FLANGE SIZE -/MECH. SEAL FORP-201 C,DURA SEAL, SIZE:- 2.250, INSIDE P.T.O. SEAL, INSIDE P.T.O. SEAL CODE NO.EMSEF/V V V DWG NO 2H-15851/SHAFT PKG, P/NO PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
61 62.000 13401147 252.72 Each
Item Description:
Gasket., P/N-G, Model-Dura Seal, Size: 2.250, Inside PTO., Code No:EMSE F/V VV, SealDwg-2H-15851
SPARES FOR P-201 C & P-3201 MFG-BHARAT PUMPS & COMPRESSORS LTD. NAINI, ALLAHABAD BPCS/O NO 514-01, PUMP SIZE- SMK IV 2X3X11-2STAG OLD ORDER NO. R-0151/LI-TS-1202/HLD, DT11-9-1979. DWG,NO. 3CP 10598 CAPACITY -M3/H-33 SUCTION FLANGE SIZE -/MECH. SEAL FORP-201 C,DURA SEAL, SIZE:- 2.250, INSIDE P.T.O. SEAL, INSIDE P.T.O. SEAL CODE NO.EMSEF/V V V DWG NO 2H-15851/GASKET,P/NO. G.Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
62 63.000 528300.93 Each
Cont on next page . . 9000845 - HA - 48002
Page 20 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Mech Seal, P/N-BW12791., Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E- 30763A3J 0467
MECH.SEAL SPARES FOR P-301C, TYPE- BORG WARNER, MODEL NO B X 3250, 504 NO, SEALBOXPRESSURE- O-2.216 KG/CM2 DRAWING NO. E- 30763 A3J 0467, MANUFACTURER:- M/STSUBAKIMOTO-MORSE CO. LTD. 134,GORYO DALTO, OSAKA, JAPAN//COMPLETE MECH. SEAL,P/NO.BW12791.Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
63 64.000 136799.96 Each
Item Description:
Stationary Face, P/N-668862, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E-30763 A3J 0467
MECH.SEAL SPARES FOR P-301C, TYPE- BORG WARNER, MODEL NO B X 3250, 504 NO, SEALBOXPRESSURE- O-2.216 KG/CM2 DRAWING NO. E- 30763 A3J 0467, MANUFACTURER:- M/STSUBAKIMOTO-MORSE CO. LTD. 134,GORYO DALTO, OSAKA, JAPAN//STATIONERY FACE, P/NO668862, REF NO S-14Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
64 65.000 307779.23 Each
Item Description:
Bellows Assbly, P/N-155741-KD, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E-30763 A3J 0467
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 21 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
65 66.000 1964.33 Each
Item Description:
Sleeve Gasket., P/N-568232,, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E-30763 A3J 0467
MECH.SEAL SPARES FOR P-301C, TYPE- BORG WARNER, MODEL NO B X 3250, 504 NO, SEALBOXPRESSURE- O-2.216 KG/CM2 DRAWING NO. E- 30763 A3J 0467, MANUFACTURER:- M/STSUBAKIMOTO-MORSE CO. LTD. 134,GORYO DALTO, OSAKA, JAPAN//SLEEVE GASKET, P/NO 568232,REF. NO S-19Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
66 67.000 1964.33 Each
Item Description:
Seat Gasket., P/N-568241,, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E- 30763A3J 0467
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
67 68.000 1964.33 Each
Item Description:
Flange Gasket., P/N-568255, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E-30763 A3J 0467
MECH.SEAL SPARES FOR P-301C, TYPE- BORG WARNER, MODEL NO B X 3250, 504 NO, SEALBOXPRESSURE- O-2.216 KG/CM2 DRAWING NO. E- 30763 A3J 0467, MANUFACTURER:- M/STSUBAKIMOTO-MORSE CO. LTD. 134,GORYO DALTO, OSAKA, JAPAN//FLANGE GASKET, P/NO.568255,
Cont on next page . . 9000845 - HA - 48002
Page 22 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
REF NO S-18Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
68 69.000 1964.33 Each
Item Description:
Adapter Gasket, P/N-568236, Model-Borg Warner Seal: B X 3250, 504 N, Seal Dwg-E-30763 A3J 0467
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
69 70.000 1600.56 Each
Item Description:
Shaft Packing (O/B) in Buna-N. P.No. 76. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
70 71.000 1600.56 Each
Item Description:
Insert Mounting (I/B) in Buna-N. P.No. 13. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 23 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
71 72.000 1600.56 Each
Item Description:
Insert Mounting (O/B) in Buna-N. P.No. 13.1. Seal Make : Flowserve. Seal Type :Tandem Cartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. DrgNo. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
72 73.000 13402787 1600.56 Each
Item Description:
Gasket P/N-71, Make-Flowserve. Type-4.750"/4.500", Tandem Cartridge QBQ/QBQ Seal ToCode 5AIN/5AIN, As Per Drg. No. 2H-85828, Item No. P305C Drive End/ Drg No. 2H-85829,Item No. P305 C( Non-Drive End)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
73 74.000 2190.25 Each
Item Description:
Gland Gasket (I/B) in Buna-N. P.No. 18. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 24 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
74 75.000 2190.25 Each
Item Description:
Gland Gasket (O/B) in Buna-N. P.No. 18.1. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
75 76.000 1600.56 Each
Item Description:
Sleeve Packing in Buna-N. P.No. 19. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
76 77.000 13402791 28978.63 Each
Item Description:
Inner Flange in SS316. P.No. 11. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
77 78.000 13402792 46399.5 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 25 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Outer Flange in SS316. P.No. 11.1. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
78 79.000 5896.81 Each
Item Description:
Drive Collar in SS316. P.No. 58. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE)/ 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
79 80.000 8895.76 Each
Item Description:
Flange Bushing in Carbon. P.No. 24. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
80 81.000 13402798 28978.63 Each
Item Description:
Inner Flange in SS316. P.No. 11. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102250
Cont on next page . . 9000845 - HA - 48002
Page 26 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
(NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
81 82.000 13402799 46399.5 Each
Item Description:
Outer Flange in SS316. P.No. 11.1. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
82 83.000 13402901 37545.45 Each
Item Description:
Shaft Sleeve in SS316. P.No. 1. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE)/ 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
83 84.000 13402902 886.06 Each
Item Description:
Lock Pin (I/B) in SS316. P.No. 5. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE)
Cont on next page . . 9000845 - HA - 48002
Page 27 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
84 85.000 13402903 886.06 Each
Item Description:
Lock Pin (OI/B) in SS316. P.No. 5.1. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
85 86.000 13402904 177.21 Each
Item Description:
Coil Spring in Hast-C. P.No. 16. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
86 87.000 13402905 10126.54 Each
Item Description:
Spring Holder in SS316. P.No. 17. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE)/ 2H-102250 (NDE)
Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 28 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
87 88.000 13402906 1265.81 Each
Item Description:
Cap Screw in Steel. P.No. 40. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
88 89.000 13402907 759.48 Each
Item Description:
Hex. HD Bolts in SS18-8. P.No. 40.1. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
89 90.000 13402908 1139.23 Each
Item Description:
Set Screw in SS316. P.No. 57. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE)
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 29 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
90 91.000 13402909 1139.23 Each
Item Description:
Set Screw in SS316. P.No. 57.1. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
91 92.000 13402910 1139.23 Each
Item Description:
Set Screw in SS316. P.No. 57.2. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
92 93.000 13402911 31645.45 Each
Item Description:
Pumping Ring (RH) in Bronze. P.No. 90. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
93 94.000 13402912 632.9 Each
Cont on next page . . 9000845 - HA - 48002
Page 30 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Setting Plate in SS316. P.No. 103. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE)..
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
94 95.000 13402913 1898.73 Each
Item Description:
Hold Ring in SS18-8. P.No. 111. Seal Make : Flowserve. Seal Type : Tandem CartridgeBXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No. 2H-102238 (DE)/ 2H-102250 (NDE)..
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
95 96.000 13402914 31645.45 Each
Item Description:
Pumping Ring (LH) in Bronze. P.No. 90. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
96 97.000 19758.16 Each
Item Description:
Retaining Ring in SS316. P.No. 54. Seal Make : Flowserve. Seal Type : Tandem
Cont on next page . . 9000845 - HA - 48002
Page 31 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Cartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
97 98.000 58631.18 Each
Item Description:
Seal Face (O/B) in Carbon. P.No. 15. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
98 99.000 195626.42 Each
Item Description:
Stationary Face (O/B) in Tung-Car. P.No. 14.1. Seal Make : Flowserve. Seal Type :Tandem Cartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. DrgNo. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
99 100.000 589681.4 Each
Item Description:
Bellow Assy / Face in SS316L/SS316/Carbon. P.No. 79. Seal Make : Flowserve. Seal Type: Tandem Cartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. DrgNo. 2H-102238 (DE) / 2H-102250 (NDE).
Cont on next page . . 9000845 - HA - 48002
Page 32 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
100 101.000 195626.42 Each
Item Description:
Stationary Face (I/B) in Tung-Car. P.No. 14. Seal Make : Flowserve. Seal Type :Tandem Cartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. DrgNo. 2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
101 102.000 13403172 3890.37 Each
Item Description:
Adaptor Gasket in Buna-N. P.No. 152. Seal Make : Flowserve. Seal Type : TandemCartridge BXW/QBW. Seal Size : 4.500"/4.500". Pump Tag : P-305C/P-307D. Drg No.2H-102238 (DE) / 2H-102250 (NDE).
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
102 103.000 8307.2 Each
Item Description:
Compression Unit (I/B) in SS316. P.No. 45A. Seal Make : Flowserve. Seal Type : TandemSBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Compression Unit-SS316 Primary Seal, Flowserve Seal 3.125/2.875''
Cont on next page . . 9000845 - HA - 48002
Page 33 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Compression Unit (I/B) in SS316. P.No. 45A. Seal Make : Flowserve.Seal Type : Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No.2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
103 104.000 13676.2 Each
Item Description:
Compression Unit with Pumping Ring (O/B) in SS316. P.No. 45. Seal Make : Flowserve.Seal Type : Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No.2H-102195
Old description: Compression Unit With Pumping Ring -SS316 Secondary Seal, FlowserveSeal 3.125/2.875'' Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Compression Unit with Pumping Ring (O/B) in SS316. P.No. 45. SealMake : Flowserve. Seal Type : Tandem SBPO-E. Seal Size : 3.125/2.875''. CodeER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
104 105.000 7139.0 Each
Item Description:
Seal Ring (I/B) in #5 Carbon. P.No. 3A. Seal Make : Flowserve. Seal Type : Tandem
Cont on next page . . 9000845 - HA - 48002
Page 34 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Seal Ring In Carbon- P.No.3A, Flowserve Seal 3.125/2.875'' TandemSBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Seal Ring (I/B) in #5 Carbon. P.No. 3A. Seal Make : Flowserve. SealType : Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No.2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
105 106.000 6749.6 Each
Item Description:
Seal Ring (O/B) in #5 Carbon. P.No. 3. Seal Make : Flowserve. Seal Type : TandemSBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Seal Ring In Carbon- P.No.3, Flowserve Seal 3.125/2.875'' TandemSBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Seal Ring (O/B) in #5 Carbon. P.No. 3. Seal Make : Flowserve. SealType : Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No.2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 35 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
106 107.000 31801.0 Each
Item Description:
Insert (I/B) in SiC. P.No. 2A. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Insert In Tungsten Carbide- P. No.2A, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Insert (I/B) in SiC. P.No. 2A. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
107 108.000 29854.0 Each
Item Description:
Insert (O/B) in SiC. P.No. 2. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Insert In Tungsten Carbide- P. No.2, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Insert (O/B) in SiC. P.No. 2. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 36 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
108 109.000 584.1 Each
Item Description:
Shaft Packing in Buna-N. P.No. P1. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Shaft Packing In G.F.Duraflon-P.No.P1 , Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Shaft Packing in Buna-N. P.No. P1. Seal Make : Flowserve. Seal Type: Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
109 110.000 584.1 Each
Item Description:
Shaft Packing in Buna-N. P.No. P. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Shaft Packing In G.F.Duraflon-P.No.P, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Shaft Packing in Buna-N. P.No. P. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008
Cont on next page . . 9000845 - HA - 48002
Page 37 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
110 111.000 584.1 Each
Item Description:
Insert Mounting in Buna-N. P.No. 6A. Seal Make : Flowserve. Seal Type : TandemSBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Insert Mounting In G.F.Duraflon-P.No.7A, Flowserve Seal3.125/2.875'' Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Insert Mounting in Buna-N. P.No. 6A. Seal Make : Flowserve. SealType : Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No.2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
111 112.000 584.1 Each
Item Description:
Insert Mounting in Buna-N. P.No. 6. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Insert Mounting In G.F.Duraflon-P.No.7, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Insert Mounting in Buna-N. P.No. 6. Seal Make : Flowserve. Seal Type: Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Cont on next page . . 9000845 - HA - 48002
Page 38 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
112 113.000 16082.22 Each
Item Description:
Sleeve in SS316. P.No. 10. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Sleeve In SS316-P.No.10, Flowserve Seal 3.125/2.875'' Tandem SBPT-ETo Code ERU-FT, Dwg.No.2H-70614
New Description: Sleeve in SS316. P.No. 10. Seal Make : Flowserve. Seal Type : TandemSBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
113 114.000 584.1 Each
Item Description:
Sleeve Packing Buna-N. P.No. 11. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Sleeve Packing In Duraflon-P.No.11, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Sleeve Packing Buna-N. P.No. 11. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Cont on next page . . 9000845 - HA - 48002
Page 39 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
114 115.000 1765.28 Set
Item Description:
Set Screw in SS20. P.No. S1. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Set Screw - Set of 4 In 20 SS-P.No.S1, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Set Screw in SS20. P.No. S1. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
115 116.000 13403844 1765.28 Set
Item Description:
Set Screw in SS20. P.No. 12. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Set Screw - Set of 4 In 20 SS-P.No.S, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Set Screw in SS20. P.No. 12. Seal Make : Flowserve. Seal Type :
Cont on next page . . 9000845 - HA - 48002
Page 40 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
116 117.000 13403845 415.36 Set
Item Description:
Spring in SS20. P.No. C&C1. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Spring - Set of 4 In 20 SS P.No.C,C1, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Spring in SS20. P.No. C&C1. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
117 118.000 4244.46 Each
Item Description:
Throttle Bush in Bronze. P.No. B. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Throtle Bush In P.No.B, Flowserve Seal 3.125/2.875'' Tandem SBPT-ETo Code ERU-FT, Dwg.No.2H-70614
Cont on next page . . 9000845 - HA - 48002
Page 41 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
New Description: Throttle Bush in Bronze. P.No. B. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
118 119.000 5321.8 Each
Item Description:
Insert Holder in SS316. P.No. 1H. Seal Make : Flowserve. Seal Type : Tandem SBPO-E.Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Insert Holder In SS 316 P.No.1H, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Insert Holder in SS316. P.No. 1H. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
119 120.000 13403848 17782.6 Each
Item Description:
Gland Ring in SS316. P.No. 1. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. SealSize : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Cont on next page . . 9000845 - HA - 48002
Page 42 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Old description: Gland Ring (G.Plate)In SS 316 P.No.1, Flowserve Seal 3.125/2.875''Tandem SBPT-E To Code ERU-FT, Dwg.No.2H-70614
New Description: Gland Ring in SS316. P.No. 1. Seal Make : Flowserve. Seal Type :Tandem SBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
120 121.000 4218.5 Each
Item Description:
Gland Gasket. P.No. G. Seal Make : Flowserve. Seal Type : Tandem SBPO-E. Seal Size :3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Old description: Gland Gasket P.No. G., Flowserve Seal 3.125/2.875'' Tandem SBPT-E ToCode ERU-FT, Dwg.No.2H-70614
New Description: Gland Gasket. P.No. G. Seal Make : Flowserve. Seal Type : TandemSBPO-E. Seal Size : 3.125/2.875''. Code ER4--OO/ER4EFOO. Drg No. 2H-102195
Description has been changed on the basis of email from Mr P G Waithi dated:10-07-2008Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
121 122.000 48994.1 Each
Item Description:
Complete seal without gland and sleeve, Dura seal, size 50mm, single inside "LD-TH"
Cont on next page . . 9000845 - HA - 48002
Page 43 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
(DIN)ER7--TH, Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
122 123.000 11321.89 Each
Item Description:
Compression unit P/N-45 (consisting of P/N-4,C,5,S), Dura seal, size 50mm, singleinside "LD-TH" (DIN)ER7--TH, Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
123 124.000 13403922 13478.43 Each
Item Description:
Seal ring P/N-3 in # 5 carbon, Dura seal, size 50mm, single inside "LD-TH"(DIN)ER7--TH, Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
124 125.000 25210.79 Each
Item Description:
Insert P/N-2 in peramic, Dura seal, size 50mm, single inside "LD-TH" (DIN)ER7--TH,Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 44 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
125 126.000 13403924 885.28 Each
Item Description:
Shaft packing P/N-P, duraflon, Dura seal, size 50mm, single inside "LD-TH"(DIN)ER7--TH, Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
126 127.000 13403925 3538.09 Each
Item Description:
Insert mounting, P/N-6, teflon coated viton P/N-P, duraflon, Dura seal, size 50mm,single inside "LD-TH" (DIN)ER7--TH, Drawing No. - 2H-81623
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
127 128.000 5467.95 Each
Item Description:
Compression Unit-SS316 Primary Seal, Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
128 129.000 12467.55 Each
Item Description:
Compression Unit With Pumping Ring -SS316 Secondary Seal, , Flowserve seal
Cont on next page . . 9000845 - HA - 48002
Page 45 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
2.625/2.375'' Tandem SBPT-E To Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
129 130.000 13403933 4885.93 Each
Item Description:
Seal Ring In Carbon- P.No.3A, , Flowserve seal 2.625/2.375'' Tandem SBPT-E To Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
130 131.000 13403934 4683.75 Each
Item Description:
Seal Ring In Carbon- P.No.3, , Flowserve seal 2.625/2.375'' Tandem SBPT-E To Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
131 132.000 13403935 18364.36 Each
Item Description:
Insert In Tungsten Carbide- P. No.2A, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 46 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
132 133.000 13403936 15500.2 Each
Item Description:
Insert In Tungsten Carbide- P. No.2, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
133 134.000 13403937 454.9 Each
Item Description:
Shaft Packing In G.F.Duraflon-P.No.P1 , , Flowserve seal 2.625/2.375'' Tandem SBPT-ETo Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
134 135.000 13403938 421.2 Each
Item Description:
Shaft Packing In G.F.Duraflon-P.No.P, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
135 136.000 13403939 421.2 Each
Item Description:
Insert Mounting In G.F.Duraflon-P.No.7A, , Flowserve seal 2.625/2.375'' Tandem SBPT-E
Cont on next page . . 9000845 - HA - 48002
Page 47 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
To Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
136 137.000 13403940 421.2 Each
Item Description:
Insert Mounting In G.F.Duraflon-P.No.7, , Flowserve seal 2.625/2.375'' Tandem SBPT-ETo Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
137 138.000 13798.54 Each
Item Description:
Sleeve In SS316-P.No.10, , Flowserve seal 2.625/2.375'' Tandem SBPT-E To Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
138 139.000 13403942 421.2 Each
Item Description:
Sleeve Packing In Duraflon-P.No.11, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 48 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
139 140.000 2291.34 Set
Item Description:
Set Screw - Set of 4 In 20 SS-P.No.S1, , Flowserve seal 2.625/2.375'' Tandem SBPT-ETo Code ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
140 141.000 2291.34 Set
Item Description:
Set Screw - Set of 4 In 20 SS-P.No.S, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
141 142.000 539.14 Set
Item Description:
Spring - Set of 4 In 20 SS P.No.C,C1, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
142 143.000 4498.43 Each
Item Description:
Throtle Bush In P.No.B, , Flowserve seal 2.625/2.375'' Tandem SBPT-E To Code
Cont on next page . . 9000845 - HA - 48002
Page 49 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
143 144.000 3100.04 Each
Item Description:
Insert Holder In SS 316 P.No.1H, , Flowserve seal 2.625/2.375'' Tandem SBPT-E To CodeERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
144 145.000 9889.8 Each
Item Description:
Gland Ring (G.Plate)In SS 316 P.No.1, , Flowserve seal 2.625/2.375'' Tandem SBPT-E ToCode ERU-TT, Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
145 146.000 13403949 4380.49 Each
Item Description:
Gland Gasket P.No. G., , Flowserve seal 2.625/2.375'' Tandem SBPT-E To Code ERU-TT,Drg. No. 2H-58921
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 50 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
146 147.000 4852.23 Each
Item Description:
Insert -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
147 148.000 14927.37 Each
Item Description:
Seal Ring -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
148 149.000 4329.95 Each
Item Description:
Compression Unit -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
149 150.000 404.35 Each
Item Description:
Insert Mounting -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 51 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
150 151.000 116.41 Each
Item Description:
Spring -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
151 152.000 404.35 Each
Item Description:
Shaft Packing -P701D, Seal Make-Flowserve sanmar, Type-PTO EU-5-V V, 1-7/8"
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
152 153.000 4498.43 Each
Item Description:
Carbon Insert (outer), P/N-2, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT,Code: E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/INSERT IN NO. 5 CARBON (OUTER) (PARTNO. 2)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
153 154.000 4498.43 Each
Cont on next page . . 9000845 - HA - 48002
Page 52 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Carbon Insert (Inner), P/N-2A, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT,Code: E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/INSERT IN NO. 5 CARBON (INNER) (PARTNO. 2A)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
154 155.000 16275.21 Each
Item Description:
Seal Ring (Outer), P/N-3, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code:E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SEAL RING IN TUNG-CAR 62-6 (OUTER)(PART NO. 3)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
155 156.000 16275.21 Each
Item Description:
Seal Ring ( Inner), Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code: E(U/U)(5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SEAL RING IN TUNG-CAR 62-6 (INNER)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 53 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
156 157.000 10007.73 Each
Item Description:
Compression Unit, P/N-45, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code:E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/COMPRESSION UNIT IN SS-316 (PART NO.45)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
157 158.000 438.05 Each
Item Description:
Insert Mounting Outer, P/N-7, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT,Code: E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/INSERT MOUNTING IN DRAFLON (OUTER)(PART NO. 7)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
158 159.000 438.05 Each
Item Description:
Insert Mounting (Inner), P/N-7A, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT,Code: E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLE
Cont on next page . . 9000845 - HA - 48002
Page 54 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
PTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/INSERT MOUNTING IN DURAFLON (INNER)(PART NO. 7A)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
159 160.000 8862.07 Each
Item Description:
Sleeve, P/N-10, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code: E(U/U)(5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SLEEVE IN SS-316 (PART NO. 10)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
160 161.000 438.05 Each
Item Description:
Sleeve Packing, P/N-11, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code:E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SLEEVE PACKING IN DURAFLON (PART NO.11)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
161 162.000 93.43 Each
Item Description:
Spring, P/N-C, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code: E(U/U)(5-5) (T/T) (T/T), Seal Dwg-2H-52200
Cont on next page . . 9000845 - HA - 48002
Page 55 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SPRING IN 20 SS (PART NO. C)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
162 163.000 438.05 Each
Item Description:
Gasket., P/N-G, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code: E(U/U)(5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/GASKET IN DURAFLON (PART NO. G)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
163 164.000 312.45 Each
Item Description:
Shaft Packing, P/N-P, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT, Code:E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/SHAFT PACKING IN DURAFLON (OUTER)(PART NO. P)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
164 165.000 6553.89 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 56 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Circulating Shroud, P/N-14, Model- Dura Seal, Size: 2.375 Inch, Type: Double PT,Code: E(U/U) (5-5) (T/T) (T/T), Seal Dwg-2H-52200
PUMP TAG NO : P-1302 X/SEAL MANUFACTURER : DURAMETALLICSIZE : 2.375" / TYPE : DOUBLEPTCODE : E(U/U)(5-5) (T/T) (T/T)DRWG : 2H-52200/CIRCULATING SHROUD IN SS-316 (PARTNO. 14)Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
165 166.000 19678.51 Each
Item Description:
Mech Seal Comp Assembly, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
SPARES FOR 3205 A/BMAKE DURAMETALLIC INDIA LTD.//* MECHANICAL SEAL COMPLETE ASSEMBLYItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
166 167.000 12282.22 Each
Item Description:
Seal Ring Tung Car A, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
167 168.000 104.15 Each
Item Description:
Spring Alloy 20, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
Cont on next page . . 9000845 - HA - 48002
Page 57 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR 3205 A/BMAKE DURAMETALLIC INDIA LTD.//SPRING ALLOY 20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
168 169.000 4515.27 Each
Item Description:
Insert Carbon, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
169 170.000 370.66 Each
Item Description:
Dura Flex Ring Duraflon, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
170 171.000 13420355 421.2 Each
Item Description:
Shaft Packing GF Duraflon, Model-Dura Seal Size: 1.750 Inch PT, Seal Dwg-1H-16273
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
171 172.000 4069.57 Each
Item Description:
Compression Unit, P/N-45, Model-Dura Seal Code: EU5qf/QTT, API Code: BSTQM, Plan:
Cont on next page . . 9000845 - HA - 48002
Page 58 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
02/62, Seal Dwg-MS9450940/3
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
172 173.000 370.66 Set
Item Description:
Shaft Pkacking, P/N-P, Model-Dura Seal Code: EU5qf/QTT, API Code: BSTQM, Plan: 02/62,Seal Dwg-MS9450940/3
PUMP NO. : P3205/3207, KHIMLINE PUMP/PUMP MODEL : ZE 40-2315, PUMP SR.NO. :51251/51238/51228/SHAFT PACKING, PART NO.PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
173 174.000 13225.71 Each
Item Description:
Seal Ring, P/N-3, Model-Dura Seal Code: EU5qf/QTT, API Code: BSTQM, Plan: 02/62, SealDwg-MS9450940/3
PUMP NO. : P3205/3207, KHIMLINE PUMP/PUMP MODEL : ZE 40-2315, PUMP SR.NO. :51251/51238/51228/SEAL RING , PART NO.3Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
174 175.000 13420397 4048.2 Each
Item Description:
P/N-2, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 59 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
175 176.000 370.66 Each
Item Description:
V Ring, P/N-7, Model-Dura Seal Code: EU5qf/QTT, API Code: BSTQM, Plan: 02/62, SealDwg-MS9450940/3
PUMP NO. : P3205/3207, KHIMLINE PUMP//INSERT MOUNTING P/NO.7Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
176 177.000 5146.31 Each
Item Description:
Insert 5 Carbn, P/N-2, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPEPT-EA-S.FF SIZE 2 3/8"/INSERT CARBON P/NO 2Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
177 178.000 5311.72 Each
Item Description:
Compression Unit, P/N-45, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPE
Cont on next page . . 9000845 - HA - 48002
Page 60 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
PT-EA-S.FF SIZE 2 3/8"/COMPRESSION UNIT AISI 316 P/NO 45Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
178 179.000 497.78 Each
Item Description:
V Ring, P/N-7, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPEPT-EA-S.FF SIZE 2 3/8"/V' RING PURYLON GF P/NO 7Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
179 180.000 438.05 Each
Item Description:
Spreader Ring, P/N-B, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPEPT-EA-S.FF SIZE 2 3/8"/SPREADER RING PURFLON GF P/NO BItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
180 181.000 127.12 Each
Item Description:
Set Spring, P/N-C, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
Cont on next page . . 9000845 - HA - 48002
Page 61 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPEPT-EA-S.FF SIZE 2 3/8"/SET OF SPRINGS ALLOY 20 P/NO CItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
181 182.000 497.78 Each
Item Description:
Shaft Packing, P/N-P, Model-Dura Seal, Type: PT-EA-S.FF, Size: 2 3/8 Inch
SPARES PARTS FOR P 3210 PFU II PUMPS SERVICE AND TEMP HYDRO CARBON AT 289 C P ONO R8954/PM-LR 012/HLD DT 11TH JUNE 1979 MAKE KSB PUMPS LTD TYPE PPK E-50-400 REF DRG NOPPK SECTIONAL DRG NO PR 1767B/SPARES FOR MECH SEAL OF P-3210 MAKE DURAMETALLIC TYPEPT-EA-S.FF SIZE 2 3/8"/SHAFT PACKING PURFLON GF P/NO PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
182 183.000 13460040 4464.73 Each
Item Description:
Insert - P/N-2, Carbon, Part Code Y5FQ2250M33., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[ APIplan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
183 184.000 13460041 15331.72 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 62 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Seal Ring - P/N-3, Tung. Car.62-6,Part Code., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[ APIplan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
184 185.000 370.66 Each
Item Description:
Shaft Packing - Part No 'P' , Viton Part CodeMVRR2250333., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[API plan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
185 186.000 370.66 Each
Item Description:
Insert Mouting - P/N-6, Viton, Part Code Y5FQ2625333., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[API plan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
186 187.000 13460044 370.66 Each
Item Description:
Sleeve Packing - P/N-11, Viton, Part Code MVSR 1750333., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[
Cont on next page . . 9000845 - HA - 48002
Page 63 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
API plan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
187 188.000 13460045 842.4 Each
Item Description:
Gland Gasket - P/N-'G', Viton, Part Code MVSR 4250333., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[API plan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
188 189.000 2628.3 Each
Item Description:
Throttle Bush - P/N-'B', Carbon, Part Code Y53A2250AC3., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[API plan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
189 190.000 12197.98 Each
Item Description:
Sleeve - P/N-10, 316 SS, Part Code 1H 69294., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[ APIplan 13 - 61 Flushing Rate 4-6 LPM]
Cont on next page . . 9000845 - HA - 48002
Page 64 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
190 191.000 13460048 2122.86 Each
Item Description:
Sleeve Collar - P/N-9, 316 SS, Part Code 1H 69295., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'PTO' E U 5 E F / V V V, Drawing No. 2H-75015,[ APIplan 13 - 61 Flushing Rate 4-6 LPM]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
191 192.000 13460049 5222.89 Each
Item Description:
Floating Bush - P/N-'24', Carbon, Part Code Y53A2250ACN., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'APTO' E U 5 E S / Q V V, Drawing No.2H-75277,[ API plan 02 - 62 Flushing Rate 4-6 LPM,Flushing Fluid LP Steam. ]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
192 193.000 13460050 12197.98 Each
Item Description:
Sleeve - P/N-10, 316 SS, Part Code 1H 75280., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'APTO' E U 5 E S / Q V V, Drawing No. 2H-75277,[ APIplan 02 - 62 Flushing Rate 4-6 LPM,Flushing Fluid LP Steam. ]
Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 65 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
193 194.000 13460051 5222.89 Each
Item Description:
Expansion Collar.-P/N-25, 316 SS, Part Code QE3B2250AM3 ., Mech. Seal Make-Flowserve,Model 2.250'' Single Inside Cartridge 'APTO' E U 5 E S / Q V V, Drawing No.2H-75277,[ API plan 02 - 62 Flushing Rate 4-6 LPM,Flushing Fluid LP Steam. ]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
194 195.000 13460052 673.92 Set
Item Description:
Spring Set [of 4 nos.].-P/N-C1, 316 SS, Part Code MKAX8840302 ., Mech. SealMake-Flowserve, Model 2.250'' Single Inside Cartridge 'APTO' E U 5 E S / Q V V,Drawing No. 2H-75277,[ API plan 02 - 62 Flushing Rate 4-6 LPM,Flushing Fluid LPSteam. ]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
195 196.000 13460053 1225.31 Each
Item Description:
Spring.-P/N-'C', 316 SS, Part Code ME3N2250333 ., Mech. Seal Make-Flowserve, Model2.250'' Single Inside Cartridge 'APTO' E U 5 E S / Q V V, Drawing No. 2H-75277,[ APIplan 02 - 62 Flushing Rate 4-6 LPM,Flushing Fluid LP Steam. ]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 66 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
196 197.000 29147.11 Each
Item Description:
Complete Mech Seal, P/N-433.01, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal,Type: PT, size: 2.875 Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291,51297, 51287, 51290, 51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
197 198.000 3323.66 Each
Item Description:
Compression Unit, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size:2.875 Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287,51290, 51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/COMPRESSION UNIT, P/N :MATERIAL : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
198 199.000 572.83 Each
Item Description:
Set Screw, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size: 2.875Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287, 51290,51289, 51298, 51344
Cont on next page . . 9000845 - HA - 48002
Page 67 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/SET SCREW, P/N : MATERIAL: A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
199 200.000 134.78 Each
Item Description:
Spring, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size: 2.875 InchTC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287, 51290, 51289,51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/SPRING, P/N : MATERIAL :A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
200 201.000 758.16 Each
Item Description:
Drive Pin, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size: 2.875Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287, 51290,51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/DRIVE PIN, P/N : MATERIAL: A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 68 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
201 202.000 13462036 94.97 Each
Item Description:
Shaft Packing, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size:2.875 Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287,51290, 51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/MANUFACTURER : KHIMLINE PUMPS, MODEL: ZE-50-4450S.NO. : 51291/51297/51287/51290/51288/51289/51298/51344/SHAFT PACKING,P/N : MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
202 203.000 19390.56 Each
Item Description:
Seal Ring (Hf), Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size:2.875 Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287,51290, 51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/SEAL RING (HF), P/N :MATERIAL : TCItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
203 204.000 4616.36 Each
Item Description:
Insert (Cf), Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size: 2.875Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287, 51290,51289, 51298, 51344
Cont on next page . . 9000845 - HA - 48002
Page 69 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
204 205.000 416.61 Each
Item Description:
V Ring, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type: PT, size: 2.875 InchTC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297, 51287, 51290, 51289,51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/V RING, P/N : MATERIAL :DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
205 206.000 13462040 430.39 Each
Item Description:
O Ring (Sleeve), P/N-412.09, Model-Sulzer Pumps, Model: ZE-50-4450, Dura Seal, Type:PT, size: 2.875 Inch TC/C, Code: EU5Q F/Q TT, API Code: BSTGM, S.No.-51291, 51297,51287, 51290, 51289, 51298, 51344
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/O RING (SLEEVE), P/N :412.09 MATERIAL : VITONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
206 207.000 52666.98 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 70 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Complete Mech. Seal, P/N-433.01, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400,Dura Seal, Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
207 208.000 9552.84 Each
Item Description:
Complete Unit+Pumping, P/N-45, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400,Dura Seal, Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/UNIT WITH PUMPING RING 2.375", P/N : 45.00 MATL :SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
208 209.000 5467.95 Each
Item Description:
Complete Unit w/O pumping, P/N-45.00A, Model-Sulzer Centrifugal Pumps, Model:ZE-80-3400, Dura Seal, Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/UNIT WITHOUT PUMPING RING 2.625", P/N : 45.00A MATL :SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 71 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
209 210.000 84.24 Each
Item Description:
Spring, P/N-C-1, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SPRING, P/N : C-1 MATL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
210 211.000 13462136 421.2 Each
Item Description:
Shaft Packing, P/N-P, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SHAFT PACKING, P/N : P MATL. : G.F. DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
211 212.000 13462137 421.2 Each
Item Description:
Shaft Packing, P/N-P1, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SHAFT PACKING, P/N : P1 MATL. : G.F. DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 72 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
212 213.000 539.14 Each
Item Description:
Hold Ring, P/N-H, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/HOLD RING. P/N : MATL : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
213 214.000 505.44 Each
Item Description:
Hold Ring, P/N-H1, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/HOLD RING, P/N : H1 MATL. : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
214 215.000 13462140 4885.93 Each
Item Description:
Seal Ring, P/N-3, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SEAL RING, P/N : 3.00 MATL. : CARBONItem specifications
Cont on next page . . 9000845 - HA - 48002
Page 73 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
215 216.000 4633.21 Each
Item Description:
Seal Ring, P/N-3.00A, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SEAL RING, P/N : 3.00A MATL. : CARBONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
216 217.000 13462142 17555.66 Each
Item Description:
Insert, P/N-2, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/INSERT, P/N : 2.00 MATL. : TCItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
217 218.000 13462143 16275.21 Each
Item Description:
Insert, P/N-2.00A, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/INSERT, P/N : 2.00A MATL. : TC
Cont on next page . . 9000845 - HA - 48002
Page 74 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
218 219.000 370.66 Each
Item Description:
Set Screw, P/N-S, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SET SCREW, P/N : S MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
219 220.000 370.66 Each
Item Description:
Set Screw, P/N-S-1, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SET SCREW, P/N : S-1 MATL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
220 221.000 1010.88 Each
Item Description:
Spring Retainer, P/N-4, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLE
Cont on next page . . 9000845 - HA - 48002
Page 75 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
TANDEMSIZE : 2.625"/2.375" C/TC/SPRING RETAINER, P/N : 4.00 MATL.: SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
221 222.000 1010.88 Each
Item Description:
Spring Retainer, P/N-4.00A, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, DuraSeal, Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SPRING RETAINER, P/N : 4.00A MATL. : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
222 223.000 758.16 Each
Item Description:
Drive Pin, P/N-D, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal, Type:Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/DRIVE PIN, P/N : D MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
223 224.000 758.16 Each
Item Description:
Drive Pin, P/N-D1, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
Cont on next page . . 9000845 - HA - 48002
Page 76 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/DRIVE PIN, P/N : D1 MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
224 225.000 421.2 Each
Item Description:
Insert Mtg., P/N-7, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/INSERT MTG., P/N : 7.00 MATL. : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
225 226.000 421.2 Each
Item Description:
Insert Mtg., P/N-7.00A, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/INSERT MTG., P/N ; 7.00A MATL. : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
226 227.000 13462152 421.2 Each
Item Description:
Sleeve O Ring, P/N-412.09.11, Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, DuraSeal, Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
Cont on next page . . 9000845 - HA - 48002
Page 77 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-202 AB/P-3202 AB/P-4202 AB/SEAL MAKE : DURAMETALLIC, TYPE : DOUBLETANDEMSIZE : 2.625"/2.375" C/TC/SLEEVE O RING, P/N : 412.09,11 MATL. : VITON ENCAPItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
227 228.000 13462153 31918.61 Each
Item Description:
Shaft Sleeve - P4202AB Model-Sulzer Centrifugal Pumps, Model: ZE-80-3400, Dura Seal,Type: Double tandem Sbpt, Size: 2.625 Inch/2.375 Inch C/TC
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
228 229.000 3100.04 Each
Item Description:
Insert holder P/N-IH in SS316- P4202AB Dura Seal, Type: Double tandem Sbpt, Size:2.625 Inch/2.375 Inch C/TC ERU--YY, dwg No. - 2H-54256R2
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
229 230.000 20554.61 Each
Item Description:
Complete Mech. Seal, Model-Dura Seal, Type: PT, Size: 2.000 Inch, SealDwg-2-H-52199
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 78 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
230 231.000 3875.05 Each
Item Description:
Compression Unit, P/N-45, Model-Dura Seal, Type: PT, Size: 2.000 Inch, SealDwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/COMPRESSION UNIT, P/N : 45 MATERIAL : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
231 232.000 572.83 Each
Item Description:
Set Screw, P/N-S, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/SET SCREW, P/N ; S MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
232 233.000 143.97 Each
Item Description:
Spring, P/N-C, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/SPRING, P/N : C MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 79 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
233 234.000 758.16 Each
Item Description:
Drive Pin, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/DRIVE PIN, MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
234 235.000 387.5 Each
Item Description:
Shaft Padking, P/N-P, Model-Dura Seal, Type: PT, Size: 2.000 Inch, SealDwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/SHAFT PACKING, P/N : P MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
235 236.000 13815.39 Each
Item Description:
Seal Ring, P/N-3, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/SEAL RING, P/N : 3 MATERIAL : TC 62-6Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 80 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
236 237.000 4498.43 Each
Item Description:
Insert (Cf), P/N-2, Model-Dura Seal, Type: PT, Size: 2.000 Inch, Seal Dwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/INSERT (CF), P/N : 2 MATERIAL : CARBONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
237 238.000 370.66 Each
Item Description:
Insert Mounting, P/N-7, Model-Dura Seal, Type: PT, Size: 2.000 Inch, SealDwg-2-H-52199
SPARES FOR P-4203/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 2.000"DRAWING NO. :2-H-52199, F.O. NO. : 37490/INSERT MOUNTING, P/N : 7 MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
238 239.000 13462462 11911.57 Each
Item Description:
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
239 240.000 13462463 3453.85 Each
Item Description:
Compression Unit, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat.Ref.-92065
Cont on next page . . 9000845 - HA - 48002
Page 81 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/COMPLETE UNIT, MATERIAL : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
240 241.000 124.07 Each
Item Description:
Spring, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat. Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/SPRING, MATERIAL : ALLOY 20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
241 242.000 7076.18 Each
Item Description:
Gland Ring, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat. Ref.-92065
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
242 243.000 13462466 3942.44 Each
Item Description:
Insert 5 Carbon, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat.Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/INSERT, MATERIAL : 5 CARBON
Cont on next page . . 9000845 - HA - 48002
Page 82 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
243 244.000 353.81 Each
Item Description:
Duraflex Ring, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat. Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/DURAFLEX RING, MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
244 245.000 353.81 Each
Item Description:
Shaft Packing P, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat.Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/SHAFT PACKING, MATERIAL - G. F. DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
245 246.000 370.66 Each
Item Description:
Gasket., Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat. Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/GASKETItem specifications
Cont on next page . . 9000845 - HA - 48002
Page 83 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
246 247.000 1124.22 Each
Item Description:
Throttle Bush, Model-Dura Seal, Size: 1.750 Inch, Seal Dwg-1H-16273, Cat. Ref.-92065
SPARES FOR P-4204 A/B/C/SEAL PARTS FOR P-4205 A/BSEAL MAKE : DURAMETALLIC, SIZE :1.750", DRWG. NO. 1H-16273B/M NO. : 92065/THROTTLE BUSHItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
247 248.000 13462536 16409.99 Each
Item Description:
Complete Mech. Seal, Model-Dura Seal,
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
248 249.000 2654.33 Each
Item Description:
Compression Unit, P/N-45, Model-Dura Seal,
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
249 250.000 476.34 Each
Item Description:
Set Screw, P/N-S, Model-Dura Seal,
Cont on next page . . 9000845 - HA - 48002
Page 84 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
PUMP NO. : P 4206 A/B,//SET SCREW, P/N : S MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
250 251.000 93.43 Each
Item Description:
Spring, P/N-C, Model-Dura Seal,
PUMP NO. : P 4206 A/B,//SPRING, P/N : C MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
251 252.000 758.16 Each
Item Description:
PUMP NO. : P 4206 A/B,//DRIVE PIN, MATERIAL ; A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
252 253.000 13462541 370.66 Each
Item Description:
Shaft Packing, P/N-P, Model-Dura Seal,
PUMP NO. : P 4206 A/B,//SHAFT PACKING, P/N : P MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
253 254.000 9872.95 Each
Cont on next page . . 9000845 - HA - 48002
Page 85 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Seal Ring (Hf), P/N-3, Model-Dura Seal,
PUMP NO. : P 4206 A/B,//SEAL RING (HF), P/N : 3 MATERIAL ; TC 62-6Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
254 255.000 13462543 3891.9 Each
Item Description:
Insert No.5(Cf), P/N-2, Model-Dura Seal,
PUMP NO. : P 4206 A/B,//INSERT NO. (CF), P/N : 2 MATERIAL; CARBONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
255 256.000 13462544 370.66 Each
Item Description:
Insert Mounting, P/N-7, Model-Dura Seal,
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
256 257.000 13462581 21582.34 Each
Item Description:
Mechanical Seal, P/N-433.01, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code :EU5Q F/Q TT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURA
Cont on next page . . 9000845 - HA - 48002
Page 86 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
257 258.000 4640.87 Each
Item Description:
Compression Unit, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/QTT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/COMPRESSION UNIT, MATL.: SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
258 259.000 627.21 Each
Item Description:
Set Screw, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, APICode: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/SET SCREW, MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
259 260.000 153.16 Each
Item Description:
Spring , Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, APICode: BSTGM
Cont on next page . . 9000845 - HA - 48002
Page 87 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/SPRING, MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
260 261.000 471.74 Each
Item Description:
Drive Pin, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, APICode: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/DRIVE PIN, MATL. : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
261 262.000 13462586 421.2 Each
Item Description:
Shaft Packing, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT,API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/SHAFT PACKING, MATL. :DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
262 263.000 15140.26 Each
Item Description:
Seal Ring, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, API
Cont on next page . . 9000845 - HA - 48002
Page 88 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/SEAL RING (HF) , MATL. :TCItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
263 264.000 4498.43 Each
Item Description:
Insert Cf, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, APICode: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/INSERT (CF), MATL. :CARBONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
264 265.000 370.66 Each
Item Description:
V Ring, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, APICode: BSTGM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
265 266.000 13462590 556.96 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 89 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
O Ring Stf Box Jacket, P/N-412.01, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/`O' RING (STUFFING BOXJACKET), MATL. : EPR, P/N-412.01Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
266 267.000 13462591 556.96 Each
Item Description:
O Ring Stf Box Jacket, P/N-412.02, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code : EU5Q F/Q TT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/`O' RING STUFFING BOXJACKET, MATL.:EPR, P/N-412.02Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
267 268.000 13462592 896.01 Each
Item Description:
O Ring (Gland) , P/N-412.06, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code :EU5Q F/Q TT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/`O' RING (GLAND), MATL.: PTFEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 90 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
268 269.000 13462593 565.17 Each
Item Description:
O Ring (Sleeve ) , P/N-412.09, Model-Dura Seal, Type: PT, Single PT 2.00 TC/C, Code: EU5Q F/Q TT, API Code: BSTGM
SPARES FOR P207/4207 (NMP-III UNIT-LRE-II)/SEAL MAKE : DURAMETALLIC, TYPE : PTDURASINGLE PT 2.00 TC/C, DURA CODE : EU5Q F/Q TTAPI CODE : BSTGM/`O' RING (SLEEVE),MATL.:PTFEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
269 270.000 15634.98 Each
Item Description:
Mech Seal , Model-Dura Seal, Type: PT, Size: 1.375 Inch Code : EU5- TT, SealDwg-2H-54257
SPARES FOR P-201AB/P-3201 AB/P-4201AB/P-4453 AB/SEAL MAKE : DURAMETALLIC, TYPE : PT,SIZE : 2.875" TC/CDURA CODE : EU5Q F/Q TT, API CODE : BSTGM/MECHANICAL SEAL COMPLETEFOR P-4218TYPE : PT SIZE : 1.375" CODE: EV5-TTDWG. NO. 2H-54257MFG. DURAMETALLIC (I)LTD.Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
270 271.000 9401.2 Each
Item Description:
Seal Ring , P/N-3, Model-Dura Seal, Type: PT, Size: 1.375 Inch Code : EU5- TT, SealDwg-2H-54257
Cont on next page . . 9000845 - HA - 48002
Page 91 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P 4218 LR PUMP//SEAL RINGMATERIAL: TUNG CAR-62PART NO: 3Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
271 272.000 75833.03 Each
Item Description:
Complete Mech Seal, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
272 273.000 49701.72 Each
Item Description:
Bellow Assembly.+S/Ring, P/N-34,3, Model-Dura Seal, Type: PBR, Size: 2.125 Inch,Material Code: CUU-GG, Seal Dwg-2H-54258
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
273 274.000 4147.68 Each
Item Description:
Collar 174 Ph, P/N-5, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/COLLAR174 PH, P/N : 5 MATERIAL : SS
Cont on next page . . 9000845 - HA - 48002
Page 92 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
274 275.000 612.66 Each
Item Description:
Cap Screw, P/N-K, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/CAP SCREW, P/N : K MATERIAL : SS 316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
275 276.000 24935.1 Each
Item Description:
Insert T.C., P/N-2, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/INSERT T.C, P/N : 2 MATERIAL : T. C.Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
276 277.000 3723.42 Each
Item Description:
Insert Mounting, P/N-7, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE
Cont on next page . . 9000845 - HA - 48002
Page 93 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/INSERT MOUTING, P/N : 7 MATERIAL :DURAFITEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
277 278.000 3723.42 Each
Item Description:
Collar Packing, P/N-P, Model-Dura Seal, Type: PBR, Size: 2.125 Inch, Material Code:CUU-GG, Seal Dwg-2H-54258
SPARES FOR P-4210/SEAL MAKE : DURAMETALLIC, TYPE : PBR, SIZE : 2.125", MATERIAL CODE: CUU-GG, F.O. NO. 38788, DRAWING NO. : 2H-54258/COLLER PACKING, P/N : P MATERIAL :DURAFITEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
278 279.000 556.96 Each
Item Description:
O Ring (Stf Box Jckt), P/N-412.01, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/`O' RING(STUFFING BOX JACKET), MATERIAL : EPRItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
279 280.000 556.96 Each
Item Description:
O Ring (Stf Box Jakt), P/N-412.02, Model-Dura Seal, Type: PT-1.375 Inch TC/C
Cont on next page . . 9000845 - HA - 48002
Page 94 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/`O' RING(STF BOXJACKET), P/N : 412.02 MATERIAL : EPRItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
280 281.000 556.96 Each
Item Description:
O Ring (Gland), P/N-412.06, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/`O' RING(GLAND), P/N : 412.06 MATERIAL : PTFEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
281 282.000 3521.24 Each
Item Description:
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
282 283.000 15634.98 Each
Item Description:
Complete Mech.Seal, P/N-433.01, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/MECHANICALSEAL, P/N : 433.01Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
283 284.000 1819.58 Each
Cont on next page . . 9000845 - HA - 48002
Page 95 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Compression Unit, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375"TC/C/COMPRESSION UNIT, MATERIAL : SS-316Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
284 285.000 572.83 Each
Item Description:
Set Screw, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/SET SCREW,MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
285 286.000 84.24 Each
Item Description:
Spring, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/SPRING,MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
286 287.000 758.16 Each
Item Description:
Drive Pin, Model-Dura Seal, Type: PT-1.375 Inch TC/C
Cont on next page . . 9000845 - HA - 48002
Page 96 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/DRIVE PIN,MATERIAL : A-20Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
287 288.000 235.87 Each
Item Description:
Shaft Packing, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/SHAFTPACKING, MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
288 289.000 9401.2 Each
Item Description:
Seal Ring (Hf), Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/SEAL RING(HF), MATERIAL : TCItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
289 290.000 3706.57 Each
Item Description:
Insert (Cf), Model-Dura Seal, Type: PT-1.375 Inch TC/C
Cont on next page . . 9000845 - HA - 48002
Page 97 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/INSERT(CF), MATERIAL : CARBONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
290 291.000 235.87 Each
Item Description:
V Ring, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/V RING,MATERIAL : DURAFLONItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
291 292.000 235.87 Each
Item Description:
O Ring (Sleeve), P/N-412.09, Model-Dura Seal, Type: PT-1.375 Inch TC/C
SPARES FOR P-215/3215/4215/SEAL MAKE : DURAMETALLIC, TYPE : PT-1.375" TC/C/`O' RING(SLEEVE), P/N : 412.09 MATERIAL : PTFEItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
292 293.000 15634.98 Each
Item Description:
Comp Mech Seal, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT, SealDwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :
Cont on next page . . 9000845 - HA - 48002
Page 98 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
EUS-TT, DRAWING NO. : 2H-54257/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
293 294.000 4411.12 Each
Item Description:
Insert Carbon, P/N-2, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT,Seal Dwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/INSERT CARBON, MATERIAL : CARBON NO.5Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
294 295.000 9401.2 Each
Item Description:
Seal Ring , P/N-3, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT, SealDwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SEAL RING, MATERIAL : TUNGCAR 62Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
295 296.000 2654.33 Each
Item Description:
Compression Unit , P/N-45, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code:EUS-TT, Seal Dwg-2H-54257
Cont on next page . . 9000845 - HA - 48002
Page 99 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/COMPRESSION UNIT, MATERIAL : SS-316 P/N : 45Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
296 297.000 13462986 261.91 Each
Item Description:
Insert Mounting, P/N-7, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT,Seal Dwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/INSERT MOUTING, MATERIAL : DURAFLON P/N : 7Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
297 298.000 261.91 Each
Item Description:
Shaft Packing , P/N-P, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT,Seal Dwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SHAFT PACKING, MATERIAL : DURAFLON P/N : PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
298 299.000 421.2 Each
Item Description:
Set Screw, P/N-5, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT, SealDwg-2H-54257
Cont on next page . . 9000845 - HA - 48002
Page 100 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SET SCREW, MATERIAL : ALLOY-20 P/N : 5Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
299 300.000 93.43 Each
Item Description:
Spring , P/N-C, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT, SealDwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SPRING, MATERIAL : ALLOY-20 P/N : CItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
300 301.000 13462990 261.91 Each
Item Description:
Sleeve Packing, P/N-11, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT,Seal Dwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SLEEVE PACKING, MATERIAL : PTFE P/N : 11Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
301 302.000 13462991 3453.85 Each
Item Description:
Sleeve , P/N-10, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT, SealDwg-2H-54257
Cont on next page . . 9000845 - HA - 48002
Page 101 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/SLEEVE, MATERIAL : SS-316 P/N : 10Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
302 303.000 13462992 387.5 Each
Item Description:
Gland Gasket., P/N-G, Model-Dura Seal, Type: PT, SIZE : 1.375 Inch, Code: EUS-TT,Seal Dwg-2H-54257
SPARES FOR P-4217 A/B/SEAL MAKE : DURAMETALLIC, TYPE : PT, SIZE : 1.375", CODE :EUS-TT, DRAWING NO. : 2H-54257/GLAND GASKET, MATERIAL : PTFE P/N : GItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
303 304.000 6160.26 Each
Item Description:
Comp Seal , Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE, SealDwg-2H-29804 R2
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
304 305.000 3891.9 Each
Item Description:
Insert Carbon, P/N-2, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE,Seal Dwg-2H-29804 R2
Cont on next page . . 9000845 - HA - 48002
Page 102 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/INSERTCAARBONMAATERIAL: CARBON NO.5PART NO.2Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
305 306.000 9872.95 Each
Item Description:
Seal Ring , P/N-3, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE,Seal Dwg-2H-29804 R2
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/SEALRINGMATERIAL: TUNG CAR 62-6PART NO.3Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
306 307.000 2654.33 Each
Item Description:
Comp Unit, P/N-45, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE,Seal Dwg-2H-29804 R2
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
307 308.000 370.66 Each
Item Description:
Insert Mtg , P/N-7, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE,Seal Dwg-2H-29804 R2
Cont on next page . . 9000845 - HA - 48002
Page 103 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/INSERTMOUNTINGMATERIAL:EPRPART NO.7Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
308 309.000 13463187 370.66 Each
Item Description:
Shaft Packing , P/N-P, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE,Seal Dwg-2H-29804 R2
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/SHAFTPACKINGMATERIAL:EPRPAART NO.PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
309 310.000 382.91 Each
Item Description:
Set Screw, P/N-5, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE, SealDwg-2H-29804 R2
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/SETSCREWMATERIAL:ALLOY-20PART NO.5Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 104 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
310 311.000 3201.13 Each
Item Description:
Sleeve , P/N-10, Model-Dura Seal, Type: PTO, Size: 1.375 Inch, Code: EU-5-EE, SealDwg-2H-29804 R2
SPARES FOR PUMP NO.P-4301,KHIMLINE PUMP/SPARES FOR MECHANICAL SEAL FOR P 4301TYPE PTOSIZE 1.375", CODE EU-5-EEDWG NO 2H-29804 R2MFG DURAMETALLIC (I) LTD/SLEEVEMATERIAL:SS 316PART NO.10Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
311 312.000 16151.14 Each
Item Description:
Comp Mech Seal , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/COMPLETE MECHANICAL SEALItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
312 313.000 480.93 Each
Item Description:
Set Screw , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/SET SCREWItem specifications
Cont on next page . . 9000845 - HA - 48002
Page 105 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
313 314.000 93.43 Each
Item Description:
Spring , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/SPRINGItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
314 315.000 758.16 Each
Item Description:
Drive Pin , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/MAKE: KHIMLINEMODEL ZE-40-250S. NO. 51242/51250KHIMLINE REF.:9750109/DRIVE PINItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
315 316.000 261.91 Each
Item Description:
Shaft Packing, Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/SHAFT PACKING
Cont on next page . . 9000845 - HA - 48002
Page 106 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
316 317.000 12602.33 Each
Item Description:
Seal Ring, Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61, Code:EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/SEAL RINGItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
317 318.000 4077.23 Each
Item Description:
Insert , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61, Code:EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS9450942/1/INSERTItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
318 319.000 261.91 Each
Item Description:
V Ring , Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61, Code:EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/SEAL MAKE : DURATYPE - PTPLAN 11/61 DURA CODE EUSF/OTTDRWG NO MS
Cont on next page . . 9000845 - HA - 48002
Page 107 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
9450942/1/V'RINGItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
319 320.000 1802.75 Each
Item Description:
Throttle Bush, Model-Sulzer Pumps: Model: ZE-40-250,Dura Seal, Type:PT, Plan:11/61,Code: EUSF/OTT, S.No.-51242/51230, Seal Dwg-MS 9450942/1
SPARES FOR P4403AB/MAKE: KHIMLINEMODEL ZE-40-250S. NO. 51242/51250KHIMLINE REF.:9750109/THROTTLE BUSHItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
320 321.000 1010.88 Each
Item Description:
Snap Ring - [ 1no], P/No.111, 304 SS. For Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
321 322.000 7160.42 Each
Item Description:
Pumping Ring [ RH ] - [1no], P/No. 90, Bronze. For Secondary Seal., SealMake-Flowserve Sanmar, Type-Tandem Inside Cartridge " QBQ / QBQ,Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API 682, Type-A, Arrangement-2Seal]
Cont on next page . . 9000845 - HA - 48002
Page 108 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
322 323.000 918.98 Each
Item Description:
Gasket - [1no], P/No.76.1,Viton. For Carbon Secondary Seal, Seal Make-FlowserveSanmar, Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code5A4X / 5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
323 324.000 918.98 Each
Item Description:
Gasket - [1no], P/No. 76,Viton. For Carbon Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
324 325.000 918.98 Each
Item Description:
Gasket - [1no], P/No. 71,Viton. For Adapter to Sleeve, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 109 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
325 326.000 13463650 1078.27 Set
Item Description:
Screw - [6no], P/No. 57.2, Alloy Steel., Seal Make-Flowserve Sanmar, Type-TandemInside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
326 327.000 13463651 16578.47 Set
Item Description:
Compression Unit - Secondary Seal
Compression unit - Retaining Ring [1no] + Screw - [4no] + Spring Holder [1no] ,+Coil Spring [8nos] P/No 54.1, P/No. 57.1 , P/No 17.1 , P/No [16.1Alloy C-276} 316SS. For Secondary Seal, Seal Make-Flowserve Sanmar, Type-Tandem Inside Cartridge "QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API 682, Type-A,Arrangement-2Seal]Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
327 328.000 13463652 17555.66 Set
Item Description:
Compression Unit - Primary Seal
Compression unit - Retaining Ring [1no] + Screw - [3no] + Spring Holder [1no] ,+Coil Spring [6nos] P/No 54, P/No. 57 , P/No 17 , P/No [16-Alloy C-276} 316 SS. ForPrimary Seal, Seal Make-Flowserve Sanmar, Type-Tandem Inside Cartridge " QBQ / QBQ,
Cont on next page . . 9000845 - HA - 48002
Page 110 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API 682, Type-A,Arrangement-2Seal]Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
328 329.000 918.98 Each
Item Description:
Gasket - [1no], P/No.19.1,GFD. For Stub Sleeve To Impeller, Seal Make-FlowserveSanmar, Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code5A4X / 5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
329 330.000 918.98 Each
Item Description:
Gasket - [1no], P/No.19,Viton. For Sleeve To Shaft., Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
330 331.000 1474.96 Each
Item Description:
Gasket - [2no], P/No.18,Viton. For Flange., Seal Make-Flowserve Sanmar, Type-TandemInside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API682, Type-A, Arrangement-2Seal]
Cont on next page . . 9000845 - HA - 48002
Page 111 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
331 332.000 17690.44 Each
Item Description:
Seal Face -[1no], P/No.15.1, Carbon. For Secondary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
332 333.000 19678.51 Each
Item Description:
Seal Face -[1no], P/No.15, Carbon. For Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
333 334.000 41277.7 Each
Item Description:
Seal Face -[1no], P/No.14.1, Silicar For Secondary Seal., Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 112 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
334 335.000 43922.85 Each
Item Description:
Seal Face -[1no], P/No.14, Silicar. For Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
335 336.000 918.98 Each
Item Description:
Gasket - [1no], P/No.13-1,Viton. For Silicar Secondary Seal., Seal Make-FlowserveSanmar, Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code5A4X / 5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
336 337.000 918.98 Each
Item Description:
Gasket - [1no], P/No.13,Viton. For Silicar Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 113 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
337 338.000 15425.15 Each
Item Description:
Flange - [1no], P/No. 11.1, 316 SS. For Secondary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
338 339.000 23233.44 Each
Item Description:
Flange - [1no], P/No. 11, 316 SS. For Primary Seal, Seal Make-Flowserve Sanmar,Type-Tandem Inside Cartridge " QBQ / QBQ, Size-2.250''/2.125'', Material Code 5A4X /5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
339 340.000 23048.11 Set
Item Description:
Shaft Sleeve Set { Shaft Sleeve+ Collar [1no+ 1no+ 6nos ], P/No. 1+ 58, 316 SS., SealMake-Flowserve Sanmar, Type-Tandem Inside Cartridge " QBQ / QBQ,Size-2.250''/2.125'', Material Code 5A4X / 5A4X, [API 682, Type-A, Arrangement-2Seal]
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
340 341.000 4700.6 Each
Cont on next page . . 9000845 - HA - 48002
Page 114 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Insert , P/N-2, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF / VV/V,Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./INSERTMATERIAL:NO.5 CARBONPART NO.2Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
341 342.000 18347.51 Each
Item Description:
Seal Ring , P/N-3, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF / VV/V,Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./SEAL RINGMATERIAL:TUNG CAR 62.6PART NO.3Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
342 343.000 438.05 Each
Item Description:
Insert Mounting, P/N-7, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF /VV/V, Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./INSERT MOUNTINGMATERIAL:VITONPART NO.7Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 115 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
343 344.000 13463786 438.05 Each
Item Description:
Sleeve Packing, P/N-11, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF /VV/V, Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./SLEEVE PACKINGMATERIAL:GF DURAFLONPARTNO.11Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
344 345.000 13463789 438.05 Each
Item Description:
Shaft Packing , P/N-P, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF /VV/V, Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./SHAFT PACKINGMATERIAL:VITONPART NO.PItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
345 346.000 421.2 Each
Item Description:
Set Screw, P/N-5, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF / VV/V,Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./SET SCREWMATERIAL:ALLOY 20PART NO.5Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 116 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
346 347.000 6117.37 Each
Item Description:
Sleeve, P/N-10, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF / VV/V,Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./SLEEVEMATERIAL:SS316PART NO.10Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
347 348.000 27344.36 Each
Item Description:
Comp Mech Seal, Model-Dura Seal, Size: 2.625 Inch, Type: PTO Code: EU5 EF / VV/V,Seal Dwg-MS 9450942/1
PARTS FOR P 4451/MECH SEAL SPARES FOR P 4451SIZZZE 2.625", TYPE PTODWG NO 2M- 53823CODE EU5 EF / VV/VMFG DURAMETALLIC (I) LTD./COMPLETE MECHANICAL SEALTYPE: PTO SIZE:2.625"DWG NO. 2M-53823CODE:EV5 EF/VV/VMFG: DURAMETALLICItem specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
348 349.000 13466026 132368.51 Each
Item Description:
Part no S 79 Outboard Bellow Assembly with Carbon Face for drive end and non driveend ( Hast C Bellow and Carbon Face); Drg. No.2H-91731 (Non-drive end) and 2H-91732(Drive end); Flowserve Durametallic Seal
Cont on next page . . 9000845 - HA - 48002
Page 117 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
349 350.000 13466027 132368.51 Each
Item Description:
Part no S 79.1 Inboard bellow Assembly with Carbon Face for Drive-End and Non-DriveEnd ( Hast C bellow and Carbon Face); Drg. No.2H-91731 (Non-drive end) and 2H-91732(Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
350 351.000 13466028 41932.13 Each
Item Description:
Part no 14 Inboard Silcar Face for Drive and Non-Drive End (Material- Silcar) ; Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
351 352.000 13466029 31697.99 Each
Item Description:
Part no 14.1 Outboard Silcar Face for Drive and Non-Drive End(Material- Silcar) ;Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve DurametallicSeal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cont on next page . . 9000845 - HA - 48002
Page 118 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
352 353.000 13466030 807.59 Each
Item Description:
Part no 13 Seat Gasket Inboard for Drive and Non-Drive End(Material - Buna N); Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
353 354.000 13466031 807.59 Each
Item Description:
Part no 13.1 Seat Gasket Outboard for Drive and Non-Drive End(Material - Buna N);Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve DurametallicSeal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
354 355.000 13466032 1002.53 Each
Item Description:
Part no 18 Insert Holder Flange Gasket for Drive and Non-Drive End(Material - BunaN); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve DurametallicSeal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
355 356.000 13466033 1002.53 Each
Item Description:
Cont on next page . . 9000845 - HA - 48002
Page 119 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Part no 18.1 Flange Gasket for Drive and Non-Drive End(Material - Buna N); Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
356 357.000 13466034 668.35 Each
Item Description:
Part no 19 Sleeve gasket for Drive and Non-Drive End(Material - Buna N); Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
357 358.000 13466035 724.05 Each
Item Description:
Part no 152 Inboard Bellow Collar Gasket for Drive and Non-Drive End (Material - BunaN); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve DurametallicSeal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
358 359.000 13466036 724.05 Each
Item Description:
Part no 152.1 Outboard Bellow Collar Gasket for Drive and Non-Drive End (Material -Buna N); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); FlowserveDurametallic Seal
Cont on next page . . 9000845 - HA - 48002
Page 120 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
359 360.000 13466037 4232.9 Each
Item Description:
Part no 57 Set Screw for Bellow Collar for Drive and Non-Drive End (Material - HastC); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve DurametallicSeal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
360 361.000 13466038 375.95 Each
Item Description:
Part no 57.1 Set Screw for Sleeve Collar for Drive and Non-Drive End (Material -Alloy Steel); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); FlowserveDurametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
361 362.000 13466039 1796.2 Each
Item Description:
Part no 57.2 Dog Point Set Screw for Sleeve Collar for Drive and Non-Drive End(Material - Alloy 20 SS); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end);Flowserve Durametallic Seal
Item specifications
Cont on next page . . 9000845 - HA - 48002
Page 121 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
362 363.000 13466040 577.85 Each
Item Description:
Part no S 103 Setting Plate for Drive and Non- Drive End (Gland Ring Part) ( Material- 316 SS); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); FlowserveDurametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
363 364.000 13466041 4246.82 Each
Item Description:
Part no S 58 Drive Collar for Drive and Non- Drive End (material 316SS); Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
364 365.000 13466042 577.85 Each
Item Description:
Part no S 40.1 Hex Bolt for Setting Plate for Drive and Non- Drive End ( Material304SS); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); FlowserveDurametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
365 366.000 13466043 14021.47 Each
Cont on next page . . 9000845 - HA - 48002
Page 122 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item Description:
Part no S 11 Flange(Inboard Seal Insert Holder) for Drive and Non- Drive End(Material 316SS); Drg. No.2H-91731 (Non-drive end) and 2H-91732 (Drive end);Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
366 367.000 13466044 19020.18 Each
Item Description:
Part no S 11.1 Flange for Drive and Non- Drive End (Material 316SS); Drg. No.2H-91731(Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
367 368.000 13466045 19020.18 Each
Item Description:
Part no S 11.2 Flange for Drive and Non- Drive End (Material 316SS); Drg. No.2H-91731(Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
368 369.000 8855.66 Each
Item Description:
Part no S 1 Shaft Sleeve for Drive and Non- Drive End (Material - 316SS) ; Drg.No.2H-91731 (Non-drive end) and 2H-91732 (Drive end); Flowserve Durametallic Seal
Cont on next page . . 9000845 - HA - 48002
Page 123 ofSign and Seal of the Tenderer 129
Sr.
No.
Tender Line
Number
Ref
Line No
Item
Number
Quantity Schedule of
Rates (A)
Purchasing
UOM
Item specifications
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Quoted % applicable to the schedule of rates specified in table above for all the Items/Services
______________ % (in figures) ___________________________________________Percent (in words).
QUOTED DELIVERY PERIOD :
EXTRAS (TAXES,DUTIES & OTHERS) :
Details of taxes, duties, levies, etc., if to be paid extra to be filled in the space given below. The values specifically
mentioned below will only be considered for extra payments. The values to be filled below can be in percentage (%)
of unit rate or an add - on amount per unit rate. Vendor to specifically mention % or currency, after the value
(e.g. X% or X Rs/-), else the value having least impact to HPCL on the unit rate will only be considered.
DGS&D Rate Contract ( Y/N ) : __________NSIC Unit ( Y/N ) : __________PSE Unit ( Y/N ) : __________SSI Unit ( Y/N ) : __________
Delivery Terms - Free to Destination location unless specified otherwise _____________________________________Validity of offer - 90 days from the initial or extended Due Date for submission of Tender whichever is later unless
: __________specified otherwise
Cont on next page . . 9000845 - HA - 48002
Page 124 ofSign and Seal of the Tenderer 129
: __________Liquidated Damages accepted ( Y/N )Payment Term ( 30 Days ), unless specified otherwise
NOTES / TERMS / CONDITIONS :
LD Applicability : UNDELIVERED
RM/PBG : N
Financial Limit : Rs.75,00,000.0
Please confirm the following best Price clause
Best Price Clause
The Vendor agrees that the commercial terms offered to the Owner under this contract shall
not in any manner be inferior on an overall basis to the terms that may be/ has been
offered by the Vendor to any other Public Sector Undertaking or Government Company. In the
event of the Vendor offering or agreeing to or has agreed to any better terms in any
manner, including a lower price for the materials, equipment or work supplied/ performed
or to be supplied/ performed under this contract with any other party, the Vendor hereby
undertakes to revise the commercial terms of this contract such that the terms offered
under this contract are not inferior on an overall basis to the terms offered to that
other party. This Best Price clause shall remain in vogue till complete execution of the
contract in all respects.
NOTES TO VENDOR:-
================
1. This is a rate contract for supply of Mechanical Seals of Flowserve make for LR Unit
for a period of one year from the date of PO. Full financial limit may or may not be
utilised. Material will be procured as and when required by User Department. Full
financial limit may or maynot be utilised.
2. Vendor shall provide relevant documents as per standards at the time of delivery of
material.
3. Vendor shall hand over or route Test certificates ( if applicable as per standards) and
other technical documents pertaining to material to Warehouse-in-charge of refinery main
Cont on next page . . 9000845 - HA - 48002
Page 125 ofSign and Seal of the Tenderer 129
warehouse and not to any other department. This is to ensure that the inspection is
carried out with all the relevant documents available with Warehouse.
All commercial documents ( except Excise Invoice i.e Duplicate for Transporter copy)
pertaining to this purchase order shall be routed to Manager-Disbursement, Refinery
Finance Department. Excise Invoice i.e Duplicate for Transporter copy, if applicable shall
be forwarded to refinery main warehouse at the time of supply of material.
4. Any Technical deviation /clarification shall be mentioned in the quotation and the same
shall be sorted out with the concerned personnel mentioned below who will coordinate with
the respective Users and clarify the same. Queries will not be entertained after the
placement of PO. Vendors who needs clarification before sending quotation/offer, shall
send theirs queries before 2 days (aleast) from the tender due date. Last moment
clarification will not be entertained.
5. Material shall be properly packed to avoid damages during transit. Each item shall be
separately packed and the label shall bear HPCL's Item code for proper identification at
our end. HPCL will not accept the damaged material.
6. Vendor shall ensure that the transporter's copy of Excise invoice ( if applicable) is
forwarded along with material supply. Excise Invoice i.e Duplicate for Transporter copy
shall be forwarded to refinery main warehouse at the time of supply of material.
7. Vendor shall strictly supply as per release PO quantity.
8. DELIVERY PERIOD: Delivery period is the essence of our tender. Material shall be
delivered to HPCL, Mumbai refinery within 4 weeks from the date of release PO or call up
letter or verbal intimation (in case of system failure). HPCL reserves the right to accept
or reject bids having higher than the required delivery period. In case you are unable to
meet the delivery period stipulated above, you may advise your best possible delivery.
9. If any rejection is found vendor shall have to replace the rejected material within 10
days from date of intimation letter from Main Warehouse. Vendor shall send his authorised
personnel to sign on the out-going gate passes for collecting the rejected material. In
case the vendor does not replace or withdraw the rejected lot within 15 days, HPCL shall
Cont on next page . . 9000845 - HA - 48002
Page 126 ofSign and Seal of the Tenderer 129
not be responsible for the loss of material.
10. Partial delivery within due date is allowed. Vendor shall ensure to cover maximum
number of items in the part consignments to avoid non-avialability of materials.
11. Safe unloading of material shall be in your scope. Vendor shall make his own
arrangements for unloading of material. Vehicles with CNG driven engines is not allowed
inside refinery premises.
12. Due to security reasons, any person delivering material to Warehouse shall have valid
identity cards of their respective company. Without valid identity card, CISF personnel
will not allow any person to enter the refinery.
13. Material shall be delivered to HPCL Refinery Main Warehouse only on working days (i.e
excluding saturdays and national holidays), unless specified to the contrary and shall
reach warehouse before 1500 Hrs.
14. Vendor shall contact the following personnel/Department for any queries:
Technical Enquiry:
------------------
A. Mr Sunil Yadav, Sr Manager Warehouse, Ph: 25076833, Email: [email protected]
B. Mr Debasish Mandal, Deputy Manager Warehouse, Ph: 25076832, Email: [email protected]
Telefax: 022-25545367.
Material Receipt/Rejection/Approval enquiry:
--------------------------------------------
A. Mr Ramesh Bhingardeve, Deputy Manager Warehouse, Ph: 25076816, Email:
[email protected], Telefax: 022-25545367
Octroi clearance (if required) related enquiry:
-----------------------------------------------
A. Mr C Hembram, Manager Expediting, Ph: 25076826, Email: [email protected], Telefax:
022-25545367
Cont on next page . . 9000845 - HA - 48002
Page 127 ofSign and Seal of the Tenderer 129
Commercial Enquiry :
--------------------
A. Officer originating the tender [given on 1st page of tender document as "Direct queries
to"]
B. Mr Ramesh Dharmik, Manager Purchase, Ph: 25076801, Email: [email protected]
Enquiry related to change in address / contact nos.:
-----------------------------------------------------
A. Mrs S Pereira, Sr Manager Purchase, Ext: 25076802, Email: [email protected]
Payment/Form-C/Sales/Excise Duty Issues related Enquiry:
-------------------------------------------------------
A. Mrs Hemlata Samant. Manager-Finance, Ph: 25076541, 25076533/6516/6538 Email:
B. Mr G Vasudevan, Chief Manager-Finance, Ph: 25076402, Email: [email protected]
15. Vendor shall despatch the material through reliable transporter on door delivery
basis.
16. Vendor shall clearly mention the Purchase order no. on the delivery challan and shall
instruct his transporter to contact the following persons ( for Refinery Main warehouse
orders only) from CISF Main gate for entry permission. Vendor shall inform the below
persons about the despatch of material.
A. Mr Sunil Yadav, Sr Manager Warehouse, Ext : 6833
B. Mr C Hembram, Manager Expediting, Ext: 6826.
C. Mr Ramesh Bhingardeve, Deputy Manager Warehouse, Ext: 6816
D. Mr Debasish Mandal, Deputy Manager Warehouse, Ext: 6832
Cont on next page . . 9000845 - HA - 48002
Page 128 ofSign and Seal of the Tenderer 129
Enclosures :
Detailed Item Description / Specifications (Yes/No)
Technical Terms and Conditions (Yes/No)
Commercial Terms and Conditions (Yes/No)
Special Terms and Conditions (Yes/No)
General Terms and Conditions (Yes/No)Signature :
Others _____ Nos (Yes/No): GUPTA R KName
Designation : General Manager - Materials
End of Document 9000845 - HA - 48002
Page 129 ofSign and Seal of the Tenderer 129