Steamflex Portable &Foldable Steam Spa

STEAMFLEX CORPORATIONHome of the best Portable & Foldable Steam Sauna

Who we are

Contact Us

SteamFlex Corporation was founded in New York City to respond to the needs for a portable and collapsible steam sauna canopy that can be used in spas, beauty shops or at home.Massage therapists and body work practitioners working in small treatment rooms cannot comfortably use steam spas that are currently offered on the market. The canopies that are currently being marketed are neither portable nor collapsible. In addition these products are too big (over 6ft long and 2ft wide). That is why, after the therapists are done with a steam treatment, they must take the customer to another room to perform other treatments.SteamFlex has therefore responded to these needs with an affordable, patented alternative canopy that is portable and collapsible. After the treatment, the user would simply fold it away.

New York, USAPhone: 1 (800) 711-SAUNA / 1(800) 711-7286Email: support@steamflex.comWeb: www.steamflex.com

Steamflex CorporationNew York, USA

Steamflex Portable & Foldable Steam Sauna

Steam Generator Timer

Table of Contents User Manual

Steamflex Steam Sauna technical description................................

Useful Tips ..........................................................................................

How to use the SteamFlex Steam Spa.............................................

Steam Generator Manual..................................................................

Timer Manual......................................................................................

01

02

03

04

05

Steamflex Steam Sauna

1. Use the Steamflex Steam Spa on yourself before using it on

someone else.

2. Keep extra towels in the treatment room. Use one small towel

to place on client’s neck and upper chest. You might use an extra

towel to cover client’s feet or full body if it gets too hot.

3. To prevent dehydration let your client drink a glass of room

temperature water.

4. Have room temperature drinking water in case your client

gets thirsty.

5. Therapist. DO NOT LEAVE THE TREATMENT ROOM. You can sit

and relax or perform a face & head massage.

6. Instruct your client to communicate with you in case of any

discomfort.

Instruct your clients NOT to touch the inside of the “roof of the

canopy” When steam fills the canopy the condensation – drops of

hot water accumulate at the roof and if shaken, can drop down

on the client’s body causing discomfort

Useful tips

Step 1. Unpack and remove the Steamflex steam sauna

from the carrying bag. Very carefully remove the sleeve lock from

the frame rods and very slowly unbend the rods.

Step 2. Fill the steam generator up with ½ of water.

Aromatherapy tea or oils can be added. For faster results we

recommend to use hot faucet (not boiled) water. Always use a

towel placed under the steam generator to prevent water

dripping onto floor.

Step3. Stretch the table cover over the massage table. 72”

long massage table is required and not included with purchase.

Step 4. Install the Steamflex canopy on the massage table,

install reinforcement rods into the tunnels on the top of the “roof”

of the canopy, and connect the steam generator with the

Steamflex canopy.

Step 5. Plug in the steam generator. Using the remote

control or the panel on the steamer, press the red “power”

button and set up temperature at level P9.

Step 6. Using the digital alarm thermometer, set up the Min/-

Max temperature level between 120-128F. Most people prefer to

keep the Min/Max temperature under the roof of the canopy be-

tween 120-128F. To better understand the temperature settings we

recommend to try to use the Steamflex Sauna

treatment on yourself (2nd person is required to operate the

steam generator) prior to using it on other people.

Step 7. When the temperature has reached the preset Min/-

Max level 120-128 degree F, change the temperature setting to P3

and assist the client to climb up onto the massage table by lifting

up the two front frame rods.

Step 8. Using the remote control or the panel on the steam-

er, control the temperature setting during the entire

treatment.

Step 9. When done, turn off and unplug the steam

generator. Slowly pull the steam generator to disconnect from the

canopy.

Step 10. To clean the sauna, use any sanitizing/alcohol spray

or soaped water.

How to Use the Steamflex Steam Spa

Step 6. Using the digital alarm thermometer, set up the Min/-

Max temperature level between 120-128F. Most people prefer to

keep the Min/Max temperature under the roof of the canopy be-

tween 120-128F. To better understand the temperature settings we

recommend to try to use the Steamflex Sauna

treatment on yourself (2nd person is required to operate the

steam generator) prior to using it on other people.

Step 7. When the temperature has reached the preset Min/-

Max level 120-128 degree F, change the temperature setting to P3

and assist the client to climb up onto the massage table by lifting

up the two front frame rods.

Step 8. Using the remote control or the panel on the steam-

er, control the temperature setting during the entire

treatment.

Step 9. When done, turn off and unplug the steam

generator. Slowly pull the steam generator to disconnect from the

canopy.

Step 10. To clean the sauna, use any sanitizing/alcohol spray

or soaped water.

Steam generator manual

Model 2015. 2L Steam Pot Evaporator SS08

1. DO NOT operate the steam generator if the outside surface of the steam generator, the electrical wire, your hands or the floor are wet. It may cause an electrical shock!

2. DO NOT plug or unplug the steam generator until the lid is completely closed clockwise. If not followed it may cause the hot water to spill, burn the skin, or damage the steam generator

3. DO NOT run the steam generator on empty or overfill with water. It may cause the damage of the electrical components

4. DO NOT try to open the lid right after turning it “OFF” You MUST let the water cool off to prevent any accidental skin burns

Please contact support@steamflex.com with any additional question

1. Fill the steam generator half way up with hot faucet water

2. Add some aromatherapy tea or oils if preferred

3. Close the lid by turning it clockwise

4. Plug it in an electrical outlet V110/60HZ (standard USA voltage). You will hear a beeping sound

5. Using the control panel, or the remote control, turn the steam generator “ON”, by pressing the “Power” button

6. Set the timer and the temperature

6.1 Set up the timer for 10, 20, or 30 minutes

6.2 Set up the temperature to P9. After the steam fills up the canopy, lower the temperature depending on your clientstolerance down to P3 or P4

7. When the treatment is over using the control panel, or the remote control, turn the steam generator “OFF”

8. Pull the steam generator away to disconnect the connection tube with the steam canopy

9. Wait for at least 10 minutes for the water to cool off until open-ing the lid turning it counter clockwise

Safety Warnings! !

Timer Manual

Function and Operation

Instruction for Alarm Thermometer

1. Measuring rang: 58F 302F2- Pressing SET button will start high temperature alarm setting(HI is flashing). Holding the SET button for 2 seconds will come intothe state of setting. Pressing ADJ button is to adjust value, thenpressing SET button to confirm the setting value. When LCD displayHI, Press ADJ. the alarm symbol open (press again, alarm off) Whenthe temperature is more higher than the setting temperature value,Buzzer will send out “BB. BB” voice for ten seconds.

3. Pressing SET button will start low temperature alarm setting(LOW is flashing). Holding the SET button for 2 seconds will comeinto the state of setting. Pressing ADJ button is to adjust Value,then Pressing SET button to confirm the setting value. When LCDdisplay HI, Press ADJ the alarm symbol open (press again, alarm OFF)when the temperature is more lower than the setting temperaturevalue, Buzzer will send out “BB, BB” voice for ten seconds.

4. Pressing ON/OFF button will turn on or turn off the LCD displayand power.

5. Press MAX/MIN button will display the memory of highest orlowest temperature.

Product Size: 110*70*19.5 mm

External Senor wire: 1.5m

SIZE