2
Sony ECM-VG1 Microphone - Tip Top Electronics Sony ECM-VG1 Electret Condenser Microphone Description: Get the best Sony ECM-VG1 Microphone only for AU$368 at TipTop Electronics Australia with top-rated customer service. For more visit: http://www.tiptopelectronics.com.au/sony-ecm-vg1-electret-condenser-microphone.html The Sony ECM-VG1 Electret Condenser Microphone is a rugged, all-metal shotgun microphone with a supercardioid polar pattern, making it a well suited choice for camcorder-mounted and boom pole operation alike. The included windscreen has been designed to maximize wind-noise rejection. The windscreen's rigid construction creates space between the microphone and outer part of the windscreen, minimizing the transfer of energy from the windscreen to the microphone itself. Also included are a microphone boom mount, spacer and 2 stand adaptors. A low-cut roll off switch further minimizes low-frequency noise due to wind noise, mechanical noise and proximity effect. The ECM-VG1 requires external 40 to 52V phantom power, and is terminated with an XLR output connector. Specially designed windscreen creates space between the microphone and outer layer of the windscreen, resulting in maximum windnoise suppression Supercardioid polar pattern effectively minimizes off-axis noise Ideal for camera and boom mounted applications Includes a threaded microphone mount for easy boom attachment Low-cut roll off filter eliminates low-frequency noise

Sony ecm vg1 microphone tip top electronics

Embed Size (px)

DESCRIPTION

Get the best Sony ECM-VG1 Microphone only for AU$368 at TipTop Electronics Australia with top-rated customer service.

Citation preview

Page 1: Sony ecm vg1 microphone tip top electronics

Sony ECM-VG1 Microphone - Tip Top Electronics

Sony ECM-VG1 Electret Condenser Microphone

Description:

Get the best Sony ECM-VG1 Microphone only for AU$368 at TipTop Electronics Australia with top-rated

customer service.

For more visit: http://www.tiptopelectronics.com.au/sony-ecm-vg1-electret-condenser-microphone.html

The Sony ECM-VG1 Electret Condenser Microphone is a rugged, all-metal shotgun microphone with a

supercardioid polar pattern, making it a well suited choice for camcorder-mounted and boom pole operation

alike. The included windscreen has been designed to maximize wind-noise rejection.

The windscreen's rigid construction creates space between the microphone and outer part of the windscreen,

minimizing the transfer of energy from the windscreen to the microphone itself. Also included are a microphone

boom mount, spacer and 2 stand adaptors. A low-cut roll off switch further minimizes low-frequency noise due

to wind noise, mechanical noise and proximity effect. The ECM-VG1 requires external 40 to 52V phantom

power, and is terminated with an XLR output connector.

Specially designed windscreen creates space between the microphone and outer layer of the windscreen,

resulting in maximum windnoise suppression

Supercardioid polar pattern effectively minimizes off-axis noise

Ideal for camera and boom mounted applications

Includes a threaded microphone mount for easy boom attachment

Low-cut roll off filter eliminates low-frequency noise

Page 2: Sony ecm vg1 microphone tip top electronics

Technical Specifications:

Transducer Mono Electret Condenser

Polar Pattern Supercardioid

Frequency Response 40Hz to 20kHz

Dynamic Range (Typical) 107dB or more

Signal-to-Noise Ratio 76dB or more (IEC179 A-weighted, 1 kHz, 1Pa)

Maximum Input Sound Level 125dB SPL

Power Requirements DC 40 to 52V

Output Connectors 3-pin XLR

Low Frequency Roll-Off Yes, Low-Cut Filter

Dimensions (Diam. x L) 13/16 x 8-3/8" (20.63 x 212.59mm)

Weight 2.3 oz (65.20g)

Contact Us:

Tip Top Electronics

Email: [email protected]

Phone No: +61 3 9028 5828

Website: http://www.tiptopelectronics.com.au/