SAPORI - Loose Furniture-

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES

NAME REVISION DATE

PHOTO / SAMPLE

REQUIREMENTS

TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT

MANUFACTURER UPHOLSTERY

WIDTH

DIAMETER

CODE

Restaurant

Sapori

FF & E SPECIFICATIONCase Goods & Upholstered Furniture

COM INCL. PIPING SGL DBL

UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES

NAME Gina Munro REVISION DATE 20.03.2014 L W DESIGN GROUP , P O BOX 74656 DUBAI, UNITED ARAB EMIRATES TEL: 9714 369 7800 FAX: 9714 369 7801 EMAIL: [email protected]

3) Fire retardent construction throughout

4) Must be of contract quality & suitable for commercial use

PHOTO / SAMPLE

LARGE SQUARE TABLE (TYPE B)

Custom made dining table.

Reclaimed timber slat table top with central timber legs/base as shown below. To be in varying stained finishes to top.

Dining Table to be made in style of photo shown below. To have concealed nylon glides to legs. Table to sit level steady on floor when in use and be easily movable for operation. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS

1) All quantity requirements must be verified prior to fabrication

2) To comply with LW Design technical specification document

TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT

MANUFACTURER To Be Custom Made UPHOLSTERY

To Be Custom Made 1400 MM WIDTH 1400 MM

750 MM DIAMETER

LWDG CODE4556

Restaurant

San Fu Lou - Cantonese Kitchen

01.301



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

SMALL RECTANGULAR TABLE (TYPE C)


Black metal legs and table top frame to match RAL 9011 in matt lightly textured finish with inset timber slats to match fixed finish ref. # 01.100.


REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



750 MM DIAMETER

LWDG CODE4556

Restaurant


01.302



UPHOLSTERY

PIPING

TRIMMING

Black metal legs with profile as shown. To taper at bottom.

No central metal strip divider.

Reclaimed timber slats to be inset to table table. To match fixed finish reference # 01.100.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

MEDIUM RECTANGULAR TABLE (TYPE D)


Black metal legs and table top frame to match RAL 9011 in matt lightly textured finish with decorative inset printed ceramic glazed tile.


REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



750 MM DIAMETER

LWDG CODE4556

Restaurant


01.303



UPHOLSTERY

PIPING

TRIMMING

Black metal legs with profile as shown. To taper at bottom.

No central metal strip divider.

Decorative Tile: Table top to have inset tile with black and white chinese willow pattern as shown. To be a printed tile on ceramic with glazed finish. To be sourced and/or manufactured locally.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

LARGE RECTANGULAR TABLE (TYPE E)


Reclaimed pine timber slat table top with central timber base as shown below. To be in varying stained finishes to top.

Dining Table to be made in style of photo shown below. To have concealed nylon glides to base.Table to sit level steady on floor when in use and be easily movable for operation. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



750 MM DIAMETER

LWDG CODE4556

Restaurant


01.304



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

SMALL ROUND TABLE (TYPE F)



Dining Table to be made in style of photo shown below. To have concealed nylon glides to base. Important note: base to be weighted accordingly to avoid tipping. Table to sit level steady on floor when in use and be easily movable for operation.Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT


To Be Custom Made WIDTH

750 MM DIAMETER 700 MM

LWDG CODE4556

Restaurant


01.305



UPHOLSTERY

PIPING

TRIMMING

Black metal base with profile as shown. To taper at bottom.


Black metal edging to top. Top to be 40mm thick only.

400mm Diameter to top of base tapering down to 350mm Diamater to bottom.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

MEDIUM ROUND TABLE (TYPE G)



Dining Table to be made in style of photo shown below. To have concealed nylon glides to base. Important note: base to be weighted accordingly to avoid tipping. Table to sit level steady on floor when in use and be easily movable for operation.Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT




LWDG CODE4556

Restaurant


01.306



UPHOLSTERY

PIPING

TRIMMING





PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

LARGE ROUND TABLE (TYPE H)



Dining Table to be made in style of photo shown below. To have concealed nylon glides to base. Important note: base to be weighted accordingly to avoid tipping. Table to sit level steady on floor when in use and be easily movable for operation. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT




LWDG CODE4556

Restaurant


01.307



UPHOLSTERY

PIPING

TRIMMING





PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

RED CHAIR (TYPE I)

Custom made chair.

Red painted timber with lacquer finish and inset rattan seat as shown on image below.

Chair to be made in style of design shown on photo below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

TBC ARM HEIGHT

MANUFACTURER To Be Custom Made / Sourced Locally UPHOLSTERY

To Be Custom Made / Sourced Locally 450 MM WIDTH 500 MM

1010 MM DIAMETER

LWDG CODE4556

Restaurant


01.308



UPHOLSTERY

PIPING

TRIMMING

Inset rattan seat.

Red/orange painted finish as shown to match RAL 3016. Paint finish may vary and be less solid in areas to achieve antique look.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

GREY CHAIR (TYPE J)

Custom made chair.

Grey painted timber with lacquer finish and inset rattan seat as shown on image below.

Chair to be made in style of design shown on photo below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

TBC ARM HEIGHT



1010 MM DIAMETER

LWDG CODE4556

Restaurant


01.309



UPHOLSTERY

PIPING

TRIMMING

Inset rattan seat

Grey/black painted finish as shown to match RAL 7022. Paint finish may vary and be less solid in areas to achieve antique look.

Image above for grey/black painted finish only. NOT chair style.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

LOW STOOL (TYPE K)

Custom made stool.

Red painted timber with lacquer finish and natural timber legs as shown below.

Low Stool to be made in style of design shown on photo below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



470 MM DIAMETER

LWDG CODE4556

Restaurant


01.310



UPHOLSTERY

PIPING

TRIMMING

Red/orange painted finish to seat as shown to match RAL 3016. Paint finish to be solid in colour. Natural timber with

lacquer finish. Timber to be confirmed.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

BENCH SEAT (TYPE L)

Custom made bench seat.

Reclaimed pine timber slat seat with solid central timber base as shown below. To be in varying stained finishes (red tones).

Bench Seat to be made in style of photo shown below. To have concealed nylon glides to base. Bench to sit level steady on floor when in use and be easily movable for operation. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



470 MM DIAMETER

LWDG CODE4556

Restaurant


01.311



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

COUNTER STOOL (TYPE M)

Custom made stool.

Black metal frame to match RAL 9011 with timber seat as shown in image below. Timber to be sourced locally in colour as shown below.

Counter Stool to be made in style of photo shown below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT




LWDG CODE4556

Restaurant


01.312



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES


LWDG CODE4556

Restaurant



ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

TEA BAR STOOL (TYPE N)

Custom made stool.

Black metal frame to match RAL 9011 with timber seat as shown in image below. Timber to be sourced locally in colour as shown below.

Tea Bar Stool to be made in style of photo shown below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.313



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH

NOTES


LWDG CODE4556

Restaurant

To Be Custom Made / Sourced Locally 570MM WIDTH 700MM

920MM DIAMETER

TBC ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

CHAIR WITH ARMS (TYPE O)

Custom made chair.

Grey painted timber with lacquer finish and inset rattan seat as shown on image below.

Armchair to be made in style of photo shown below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.314



UPHOLSTERY

PIPING

TRIMMING

FINISH: Grey/black painted finish as shown to match RAL 7022. Paint finish may vary and be less solid in areas to achieve antique look.

TECHNIQUE: Paint finish to be sanded down accordingly to achieve the correct looking finish as shown.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES


LWDG CODE4556

Restaurant


900 MM DIAMETER

ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

MAITRE' D

Custom-made Traditional Chinese drawer unit.

Black painted finish as shown with brass hardware (see image below). Maitre' D to be made in style of photo shown below. To have concealed nylon glides to base. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.315



UPHOLSTERY

PIPING

TRIMMING

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES


LWDG CODE4556

Restaurant


900 MM DIAMETER

ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

WAITER STATION

Custom made Waiter Station.

Natural Timber finish as shown to match fixed finish ref. # 01.100 (see image below).

Waiter Station to be made in style of photo shown below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.316



UPHOLSTERY

PIPING

TRIMMING

2 drawers to either side.

Cupboards located to the centre.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES


LWDG CODE4556

Restaurant


900 MM DIAMETER

ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

LARGE WAITER STATION

Custom made Waiter Station.

Natural Timber finish as shown to match fixed finish ref. # 01.100 (see image below).

Waiter Station to be made in style of photo shown below. To have concealed nylon glides to legs. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.317



UPHOLSTERY

PIPING

TRIMMING

2 drawers to either side.

Cupboards located to the centre. Large waiter station to have 4 cupbaords to centre.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES


LWDG CODE4556

Restaurant



ARM HEIGHT


TELEPHONE/FAX1 2

EMAIL/WEBSITE

EXTRA LARGE ROUND TABLE (TYPE P)



Dining Table to be made in style of photo shown below. To have concealed nylon glides to base. Important note: base to be weighted accordingly to avoid tipping. Table to sit level steady on floor when in use and be easily movable for operation. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS





PHOTO / SAMPLE


01.318



UPHOLSTERY

PIPING

TRIMMING





PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

TOWEL CUPBOARD @ TOILETS

To be sourced locally in style of chinese unit shown below.

Similar unit to be sourced locally and painted to match red finish as shown in image below if required.

Towel Cupboard to be made in style of photo shown below. To have concealed nylon glides to base. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production and/or purchase.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT

MANUFACTURER To Be Sourced Locally UPHOLSTERY

To Be Sourced Locally 300 MM WIDTH 450 MM

2100 MM DIAMETER

LWDG CODE4556

Restaurant


01.319



UPHOLSTERY

PIPING

TRIMMING

To have a red lacquer paint finish as shown.

Inside of unit to be natural timber finish.

PROJECT

PROJECT NO

AREA

SUPPLIER DEPTH

O/A HEIGHT

SEAT HEIGHT

ITEM ID CODE 3

DESCRIPTION

FINISH SPECIAL

NOTES




PHOTO / SAMPLE

VANITY CONSOLE @ TOILETS

To be custom made to exact dimensions in style of image shown below.

To match timber fixed finish ref. # 01.103. Vanity Console to be made in style of photo shown below. To have concealed nylon glides to base. Manufacturer to submit shop drawings, finish samples & prototype sample for designer's approval before production.

REQUIREMENTS



TELEPHONE/FAX1 2

EMAIL/WEBSITE

ARM HEIGHT



750 MM DIAMETER

LWDG CODE4556

Restaurant


01.320



UPHOLSTERY

PIPING

TRIMMING

To have a decorative carved detailing as shown.

To match timber fixed finish ref. # 01.103.

Hollow cut out as shown.

Documents

SAPORI - Loose Furniture-