Upload
jiksi4u
View
35
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Safety equipment checklist
Citation preview
Safety Checklist
Safety ChecklistDCU/MRUTypes of ChecklistFire EquipmentFire ExtinguishersDeluge SystemBooster PumpSCBASafety ShowerFrequency of ChecklistWeekly (Every Friday or Saturday )SCBA 30 Minute Pack (Day Shift)Jockey Pump (Swing Shift)Safety Shower (Night Shift)Monthly (Every 1st Friday or Saturday)Fire Equipment (Day Shift)Fire Extinguishers (Swing Shift)Deluge System (Night Shift)
SCBA 30 Minute Pack
SCBA 30 Minute PackLocated as designated & accessible It's free from physical damageFacemask & Condition of hose Facemask clean & stored in plastic bagWaist & Condition of shoulder strapsAny Sign of Cylinder damageCylinder air pressure gauge "FULL (2216 psi)Open cylinder fullyAlarm warning activated when testedRegulator purge valve is closedCondition of Remote pressure gaugeClose cylinder & bleed pressureCheck hydro-test cylinder (valid date 5 years)Inspection tag is signed & updated
Jockey Pump
Jockey Pump
Safety Shower
Is route to shower obstacles free?Is supply valve open?Is supply valve open?Is red light alarm working?Is alarm system working?Is water flow just enough?Is Shower Switch OK?Is Shower Head OK?Is Shower Switch Hand OK?Is Shower pipe OK?Is Shower drainage OK?Is Shower Clean?Is Shower Sprayer ok?Is Shower clean?Is Shower Eyewash Blow clean?Is Shower Eyewash Blow ok?Is Shower Eyewash drainage Working?Is Eyewash Switch OK?Is Eyewash flow just enough?Is Foot Treadle OK?There is corrosion point?
Fire Equipment
NUMBERING & LOCATIONVALVE FUNCTIONING ACCESSIBLE & ANY OBSTRUCTEDFIRE NOZZLEAPPEARANCE & GUARDHYDRANT WRENCHMONITORSECTIONAL LINE
Valve should be normal open
Nozzle should always be left in the Down Position
Caps should be Hand tight. Fire Extinguishers
PressureLocated at the designated placeSeals and valve locking deviceHose assembly and nozzle / hornNo obstruction to access or visibilityNameplate and Painting
Not Pressurized
Nameplate and Painting
Pressure
Not Pressurized
Deluge System
General ConditionInspect spray nozzles, nozzle pipe, hangers, and valves to make sure they are in good condition.Alarm devicesCheck for physical damage and that electrical connections are secureGaugesMake sure all gauges are operational and calibrated (5 Years)Control Valves1- Accessible, open and car-sealed2- No corrosion and no leaksHydraulic NameplateIf system is hydraulically calculated, ensure nameplate is legible and securely attached.113-D-0013Lean Sponge Oil CoalescerDirection of NozzleCondition of sensor BulbIf Any ObstructionIf Any Leakages
Accessible, open and car-sealed
Direction of Nozzle
Condition of sensor Bulb