30
Radiation and Fluoroscopic Equipment Tour of Ionizing Lab 1

Radiation and Fluoroscopic Equipment

Embed Size (px)

DESCRIPTION

Radiation and Fluoroscopic Equipment. Tour of Ionizing Lab. What to Expect this Week…. Radiation Equipment and Tour. Assignments. Discussion Question Due QUIZ 1. Radiation Equipment X-ray Tube components Main components of Fluoroscopic Equipment Tour of Lab. Terminology. - PowerPoint PPT Presentation

Citation preview

Radiation and Fluoroscopic EquipmentTour of Ionizing Lab

1

What to Expect this Week….

Radiation Equipment and Tour

• Radiation Equipment• X-ray Tube components• Main components of

Fluoroscopic Equipment• Tour of Lab

Assignments

• Discussion Question Due• QUIZ 1

2

3

Terminology• X-ray tube assembly• Collimator• Radiographic table• Bucky tray• Wall Bucky tray• Tube support• Generator• Control console• Free floating• Kilovoltage• Millamperes• Exposure• Mobile radiography• Radiolucent• Radio-opaque• Thermionic emission• Focusing cup• Terminal-positive, negative

• Longitudinal• Vertical• Transverse• Alignment• Table top• Tube angulation• Image receptor• Cassette• Computed radiography• Digital radiography• Fluoroscopy• PACS• Post processing• Viewing station• Current• Kinetic energy• Potential energy• Pyrex glass

4

Radiation Equipment

Inside the x-ray room Outside the x-ray room

5

X-ray Tube Assembly

Cathode Terminal, Anode Terminal

6

Collimator Assembly

7

Collimator Assembly

8

Xray Table Apparatus

9Fluoroscopy tube and table

X-ray tube and table movements

10

X-ray table apparatus

11

X-ray Table Apparatus

12

X-ray Table Apparatus

13

Image Receptors

14

Potter-Bucky tray

15

16

Wall Bucky Tray

Control Panel• Factors that

technologist can control from the control panel are:

• Kilovoltage of x-ray• Milliampere of x-ray• Time of exposure

17

Control Panel

18

Ancillary Equipment

19

Portable X-ray

20

X-ray Tube Assembly

Cathode Terminal Anode Terminal

21

• Positive charge when kilovoltage applied• Tungsten target• Rotating vs. fixed target

• Negative charge when millamps applied• Tungsten filament• Focusing cup• Thermionic emission

Miscellaneous equipmentPositioning spongesTapeLead apronsLead blockersMarkersSand bagslinens

22

1

2

3 3

4

5

6

7. Describe Tube Travel

8. Describe tube travel

9. Describe how the tube would travel in order to direct x-ray output at #1??

23

Lab Tour

24

X-ray Tube Assembly

25

X-ray Tube Assembly

26

X-ray Tube Assembly

Cathode

• Negative terminal• Tungsten filament• Focusing cup• Milliamps applied• Determines amount of

electrons • Thermionic emission

Anode

• Positive terminal• Tungsten target• Rotating or fixed target• Target angle• Neck of anode• Rotor, stators

27

Cathode Terminal

28

• Negative terminal• Tungsten filament• Focusing cup• Milliamps applied• Determines amount of

electrons • Thermionic emission

Anode Terminal

29

• Positive terminal• Tungsten target• Rotating or fixed target• Target angle• Neck of anode• Rotor, stators• Kilovoltage applied

X-ray Tube Housing

30

Pyrex glass encasementWindow for x-rays to exitLead and steel Oil for cooling