Upload
lydien
View
256
Download
8
Embed Size (px)
Citation preview
Product and Installation Guide Washroom & Bathroom 2011 1
Product Guide
Duofix WC frames Page 3
Concealed cisterns Page 9
WC flush plates Page 14
Remote flushing kits Page 21
Duofix basin frames Page 27
Taps Page 28
Duofix bidet frames Page 42
Duofix urinal frames Page 43
Accessories Page 57
Drainage Page 62
Traps Page 67
Fill and flush valves for ceramic cisterns Page 77
Geberit AquaClean Page 79
Spares Page 97
Installation Guide
Main methods of Duofix installation Page 111
Waste and drainage connection Page 117
Numerical Index Page 121
2 Product and Installation Guide Washroom & Bathroom 2011
Product Guide
Compatibility - Flush plates and buttons
Flush plates UP320 UP720 UP200 AP123Sigma10 Rumba Tango Mambo
✓ ✓
Sigma20 Sigma50 Sigma60 Samba Bolero
✓ ✓
HyTronic infra-red 115.890.00.1115.891.00.1
115.855.00.1
Large Access Cover Plate
✓ ✓
Kappa20 Kappa50 Artline Kappa21
✓
Small Access Cover Plate
✓
HyTouch single flush buttons
Short wall palm 115.114.xx.1241.199.xx.1
Long wall finger241.144.00.1
Short wall finger115.947.xx.1.xx.1
Long wall finger115.943.21.1
Short wall palm 115.949.21.1241.282.21.1
Palm push 115.941.xx.1
115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1
115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1
241.199.xx.1241.198.xx.1241.282.21.1241.144.00.1115.941.xx.1
HyTouch dual flush buttonsHand push115.942.xx.1
Finger push115.999.21.1
Finger push115.075.21.x
115.942.xx.1 115.075.21.x 115.942.xx.1
HyTronic infra-red buttonsSensor flush 115.857.xx.1
Insert for in-cistern blocks115.612.00.1
Insert for adding in-cistern blocks compatible with Geberit’s Sigma10, 20 and 50 range of flush plates
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2011 3
Duofix WC frames
Duofix WC frame 1.12 m with UP320 for Sigma flush plates - PreWall
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with HyTouch pneumatic button• Single flush with HyTronic infra-red flush or HyTouch flush pneumatic
buttons• The protection cover protects the service opening against moisture
and dirt • Protection cover for service opening can be mounted without tools
and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material
Excluded: Flush plate
Ordering Information
Duofix WC frames
0
0-20
100
50R½
73
1045
23
112
18/2318/23
195 ≥ 30
0
100
48
9-135
12 6
41max. 62
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.383.00.5 1 12
4 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix WC frames
Duofix WC frame 1.12 m with UP320 for Sigma flush plates
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with HyTouch pneumatic button• Single flush with HyTronic infra-red flush or HyTouch flush pneumatic
buttons• The protection cover protects the service opening against moisture
and dirt • Protection cover for service opening can be mounted without tools
and cut to length• Cistern can be reversed to give access from behind in a duct situation
when flushed with HyTouch pneumatic buttons or HyTronic sensor flush
• Universal water supply connection compatible with MeplaFix, can be mounted and operated without tools
• Self-locking feet for tool-free alignment of the element. (Friction feet have to be locked with spanner)
• For pans with contact surfaces smaller than 170 mm (see accessory 111.847.00.1)
• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; Fastening material
Excluded: Flush plate; PreWall brackets; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm
Ordering Information
0
0-20
100
50R½
73
1045
23
112
195 ≥ 30
18/23
0
100
48
9-135
12 6
41max. 62
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.384.00.5 1 12
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2011 5
Duofix WC frame 0.98 m with UP200 for Kappa flush plates - PreWall
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 980 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Concealed cistern UP200 with front or top actuation• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with HyTouch pneumatic button• Single flush with HyTouch pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by
hand• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material
Excluded: Flush plate
Ordering Information
Duofix WC frame 0.82 m with UP200 for Kappa flush plates - PreWall
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 820 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Concealed cistern UP200 with front or top actuation• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with HyTouch pneumatic button• Single flush with HyTouch pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by
hand• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1
111.292.00.1 1
33
98
50
18/23
23
0-20
0
R1/2
915
195
73
≥ 30
91
max. 107
0
48
41
66
min. 17
max. 62
9-135
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1
111.242.00.1 1
82
50
18/23
22
0-20
0
R1/2
32
755
73
195 ≥ 30
75
0
48
40
max. 9166
min. 17
max. 62
9-135
6 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix WC frames
Duofix WC frame 1.12m with UP720 for Sigma flush plates - PreWall New
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-height Duofix system wall in front of a solid or drywall construction
• For installing in a load bearing stud wall• For installation in split-height PreWall construction in front of a solid or
drywall construction• For installation in room-height PreWall or partition wall• For connecting Geberit AquaClean• Is not allowed to be embedded in concrete at full room height
Characteristics
• Self-supporting• Frame height 1120 mm• M12 fastening for ceramic appliances, fastening distance 18 cm or
23 cm • Geberit Sigma concealed cistern 8 cm (UP720), front actuation• Concealed cistern fully insulated against condensation• Protection cover for service opening can be mounted without tools
and cut to length• Water supply connection at the top, offset to the left side• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Sound-absorbing actuator rods, tool-free, fast adjustment• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Adjustable flushing volume• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture
and dirt • Outlet bend depth with vertical connection 9 cm• Fastening for outlet bend adjustable in depth and sound-absorbing• Installation depth at least 8 cm with vertical drainage connection• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet galvanised, adjustable 0-12 cm• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Element depth 8 cm
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Two protection plugs; Protection housing for service opening; Flush bend; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, PE-HD, ø 90 mm, extended; Adaptor sleeve, HDPE, ø 90/110 mm; Conduit pipe for the water supply connection of Geberit AquaClean; 2 PreWall brackets; Fastening material
Excluded: Flush plate
Ordering Information
Duofix WC frame 0.79 m with furniture concealed cistern - pneumatic
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in bathroom furniture with full length front panel (not for use with front plinths)
• For furniture with an internal dimension of 465 mm wide, the item can not be used with side plinths
• For dual flush
Characteristics
• Pneumatic flush actuation• Front or top actuation• Water supply connection at the bottom left• Self-supporting• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm
Product Details
Additional NoteDual flush actuator
Ordering Information
0-12
≥ 34
16
0
23
100
R½59
18/23 112
98
45
98
1-58
0-12
0
41≤ 62
0-12
0
9
48
135
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.729.00.1 1 12
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.5 and 3 l
Article no. PU1
111.706.00.1 1
10
465
0
0-20
79
18/23
195
195−315
0
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2011 7
Duofix WC corner frame 1.12 m with UP320 for Sigma flush plates
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation as a corner element in front of a drywall, solid wall, Duofix system wall
• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with axis centre mark• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture
and dirt • Protection cover for service opening can be mounted without tools
and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Telescopic profiles to fasten to the wall and for fastening panelling• Telescopic profiles with detent mark• Wall fixture variable from 30° to 60°• Narrow leg supports allow for lateral offset of the drainage pipe• Support for front, top and lateral panelling• Variable element depth (see page 116)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Flush bend; Conduit pipe for the water supply connection of Geberit AquaClean; Protection plug; Installation kit for electrical connection; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; WC connection set, ø 90 mm; Fastening material
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 6 and 3 l
1045
1120
0
0-200
500-760R½
180/230
1000
230
90
0
1000
128
48
110
60
410max. 6202010
Article no. PU1 PU4
111.399.00.5 1 10
8 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix WC frames
Duofix WC frame 1.12 m with UP320 for Disabled WC and Sigma flush plates
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For wall-hung WC with projection > 620 mm• For installation in a partial-height Duofix system wall in front of a solid
or drywall construction• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For installation in split-height PreWall construction in front of a solid or
drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For disabled WC installations• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• UP320 concealed cistern with front actuation• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • The protection cover protects the service opening against moisture
and dirt • Not suitable for use with flush buttons• Protection cover for service opening can be mounted without tools
and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Adjustable installation height of the WC, 410 - 460 mm• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material
Excluded: Flush plate
Ordering Information
Duofix frame for support handles
Application
• For installation of grab rails• For a screed of 0 - 200 mm• For installation in a room-height Duofix system wall in front of a solid or
drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For installation in a load bearing stud work
Characteristics
• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening plate for support handles made from veneer wood, water-
resistant laminate, adjustable height and depth• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)
Additional NoteFastening material
Ordering Information
73
300300
R½
1000
230-280
0 30
0-200
180/230 1045-1055
425
1120
130
0
1000-1010
410-460
170 45
48
90-135
2010
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.352.00.5 1 8
Article no. PU1 PU4
111.790.00.1 1 10
50112
365
100
0-20
0
73
85
0
4
48
Product GuideConcealed cisterns
Product and Installation Guide Washroom & Bathroom 2011 9
Sound insulation
Application
• For wall-hung WC and wall-hung bidet• For sanitaryware with fixing centres 180 mm or 230 mm• For decoupling solid-borne noise with WC and bidet• Insulation to be trimmed after pan fixed
Characteristics
• White
Product Details
Additional Note2 acoustic insulation sleeves
Ordering Information
Concealed cisterns
Concealed dual flush cistern UP320 for Sigma flush plates
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Concealed cistern fully insulated against condensation• Front actuation only• Protection cover for service opening can be mounted without tools
and cut to length• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Single flush with HyTronic infra-red flush or HyTouch pneumatic
buttons• Flushing unit for dual flush and single flush• Adjustable flushing volume• Water supply connection at centre back or at the top• Flush bend has maximum 8 cm adjustment. Flush can be cut down by
maximum of 8 cm • Installation height 1080 mm (can be cut down, depending on the WC
pan performance)• Installation depth adjustable, 160 - 205 mm• Fastening bracket adjustable in depth• Cistern can be reversed to give access from behind in a duct situation
when flushed with HyTouch pneumatic buttons or HyTronic sensor flush
• Flush valve features 6l and 4.5l flush settings to enable either a 6l and 3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Flush pipe ø 45 mm; Fastening for flush bend; Protection plug for flush pipe; 2 slotted flat irons; 2 fastening brackets, pre-mounted; Fastening material
Excluded: Flush plate
Ordering Information
Product material PE expanded
Material thickness 6 mm
Article no. PU1 PU2 PU4
156.050.00.1 1 10 200
Concealed cisterns
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
109.309.00.5 1 20
41
108
51
1045
235
23
100
R1/2
57
30
135
0
365
845
0
100
12 2-9
16-205
10 Product and Installation Guide Washroom & Bathroom 2011
Product GuideConcealed cisterns
Concealed dual flush cistern UP720 for Sigma flush plates
Application
• For solid construction• For floor standing WC• For concealed installation
Characteristics
• Concealed cistern fully insulated against condensation• Geberit Sigma concealed cistern 8 cm (UP720), front actuation• Concealed cistern for simple installation and tool-free repair works• Protection cover for service opening can be mounted without tools
and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flush
plates • Stop-and-go flush with Rumba, Mambo or Tango actuator plate• Single flush with Sigma10 actuator plate • Flush bend has maximum 8 cm adjustment. Flush can be cut down by
maximum of 8 cm • Adjustable flushing volume• Water supply connection at the top, offset to the left side• Flush bend adjustable, 2 cm upwards and 1 cm downwards
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve and hand wheel; Flush bend; Protection housing for service opening; Fastening material; Protection plug for flush bend
Excluded: Flush plate
Ordering Information
Concealed dual flush cistern UP200 for Kappa flush plates
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Fully insulated against condensation• Water supply connection left• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with HyTouch single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by
hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 82 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; Fastening for flush bend; 2 fastening brackets, pre-mounted; Fastening material
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 9 and 3 l
Flush volume large range 6 / 9 l
Flush volume small 3 l
Article no. PU1 PU4 Price£
109.772.00.1 1 32 145.00
0
R1/2
8
505
57
65–80
87
X
110
-15
≥ 30
8 1–5
110
0
87
-15
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
109.200.00.1 1 27
X
465
57
13
335465
0
9
18
min.3
0
max.9
25
max.9
Product GuideConcealed cisterns
Product and Installation Guide Washroom & Bathroom 2011 11
Concealed dual flush cistern UP200 for Kappa flush plates with extended flush pipe New
Application
• For floor-standing and wall-hung WCs• For private and semi-public areas• For concealed installation
Characteristics
• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Protection housing for service opening, can be cut to length• Fully insulated against condensation• Water supply connection left• Dual flush with flush plates Artline or Kappa flush plates• Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with HyTouch single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by
hand• Flush bend, welded• Connection hose to angle stop valve can be screw-connected by
hand• Fast adjustment of the actuator rods for flush plate• Cistern height 98 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional NoteWater supply connection R 1/2" with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; WC connection set, ø 90 mm; 2 fastening brackets, pre-mounted; Fastening material
Excluded: Flush plate
Ordering Information
Concealed single flush cistern AP123
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Fully insulated against condensation• Impuls380 side filling valve• Cover without button• Water supply connection left and right• Flush pipe connection fitted• Single flush with HyTouch single flush pneumatic buttons• 300 mm extention pipe available (118.131.11.1)
Product Details
Additional NoteFlush bend 39 x 35 cm, ø 50/44 mm; Pneumatic actuation unit; Fastening material
Excluded: Angle stop valve R 1/2"; Pneumatic push button
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1
109.211.00.1 1
X
465
57
13
465
595
0
9
18
min.3
0
max.9
25
max.9
Fill time (6 l) at 3 bar flow pressure 30 s
Fill time (9 l) at 3 bar flow pressure 45 s
Flush volume range 6 / 9 l
Drainage capacity 2.2–2.9 l/s
Flush volume factory setting 9 l
Article no. Colour PU1 PU4
123.137.11.1 White 1 24
305–3
41
33
3838
128
45
65
65
12 Product and Installation Guide Washroom & Bathroom 2011
Product GuideConcealed cisterns
Pneumatic operated concealed dual flush cistern for low height furniture
Application
• For installation in low height bathroom furniture (minimum height 790 mm from finished floor)
• For back to wall floor-standing WCs
Characteristics
• Pneumatic flush actuation• Water supply connection at the bottom left• Top or front access• Includes dual flush pneumatic button
Product Details
Additional NoteDual flush actuator; Flush bend; Sleeve; Fastening material
Ordering Information
Monolith for wall mounted WC, glass
Application
• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 66)
• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry
wall installation (131.104.00.1) - see page 60• For installation as part of renovation work, design or new build• Not suitable for Geberit AquaClean - see page 13
Characteristics
• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board
Product Details
Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material for solid wall; Fastening material for wall-hung WC
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.5 and 3 l
Article no. PU1 PU4
109.720.00.1 1 24
30
464
355
45
94
98 8
15
8
R1/2
132
65 29
75-16
9
M64x2
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1 PU4
131.021.SI.1 White glass / aluminium 1 6
131.021.SJ.1 Black glass / aluminium 1 6
131.021.SK.1 NEW Mint glass / white aluminium 1 6
0
908
485
R½
101
18/23
25
47 413 4 13 4
106
43
0
Product GuideConcealed cisterns
Product and Installation Guide Washroom & Bathroom 2011 13
Monolith for floor mounted WC, glass
Application
• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 66)
• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires
131.083.16.1)• For mounting on finished floors• For installation as part of renovation work, design or new build
Characteristics
• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Integrated dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board
Product Details
Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material for solid wall; Rubber seal EPDM
Ordering Information
Monolith for Geberit AquaClean
Application
• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 66)
• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry
wall installation (131.104.00.1) - see page 60• For installation as part of renovation work, design or new build• For connecting Geberit AquaClean WC
Characteristics
• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Brushed and anodised aluminium side profiles• Side base pods can be adjusted to skirting board
Product Details
Additional NoteCistern element with front and side cladding; Water supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material for solid wall; Fastening material for wall-hung WC
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1 PU4
131.002.SI.1 White glass / aluminium 1 6
131.002.SJ.1 Black glass / aluminium 1 6
131.002.SK.1 NEW Mint glass / white aluminium 1 6
0
908
485R½
1010
180 10
10
106
0
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1 PU4
131.023.SI.1 White glass / aluminium 1 6
131.023.SJ.1 Black glass / aluminium 1 6
0
908
485
R½
10118/2318/23
25
15
28
106
455
25
0
14 Product and Installation Guide Washroom & Bathroom 2011
Product GuideWC flush plates
WC flush plates
Sigma10 single flush plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For single flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Push rod; Distance bolts
Ordering Information
Sigma20 dual flush plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Sigma50 dual flush plate for UP320 and UP720 - Bespoke cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Excluded: Design cover
Ordering Information
Sigma50 dual flush plate for UP320 and UP720 - Glass cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
WC flush plates
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.758.KJ.1 White / gloss chrome / white 1 10 180
115.758.KK.1 White / gold-plated / white 1 10 180
115.758.KL.1White / matt chrome / matt chrome
1 10 180
115.758.KM.1 Black / gloss chrome / black 1 10 180
115.758.KH.1Gloss chrome / matt chrome / gloss chrome
1 10 180
115.758.KN.1Matt chrome / gloss chrome / matt chrome
1 10 180
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.778.KJ.1 White / gloss chrome / white 1 10 180
115.778.KK.1 White / gold-plated / white 1 10 180
115.778.KL.1 White / matt chrome / matt chrome 1 10 180
115.778.KM.1 Black / gloss chrome / black 1 10 180
115.778.KH.1Gloss chrome / matt chrome / gloss chrome
1 10 180
115.778.KN.1Matt chrome / gloss chrome / matt chrome
1 10 180
164
246 11
164
246 11
Actuation force < 20 N
Product material Die-cast zinc
Article no. PU1 PU2
115.788.00.1 1 5
Actuation force < 20 N
Product material Die-cast zinc / glass
Article no. Colour PU1 PU2
115.788.SC.1 White with ornament x 1 5
115.788.SE.1 Green satinised 1 5
115.788.SD.1 Smoked glass reflective 1 5
164
246 14
164
246 14
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2011 15
Sigma50 dual flush plate for UP320 and UP720 - Plastic cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Sigma50 dual flush plate for UP320 and UP720 - Brushed stainless steel
Application
• For dual flush• For Geberit concealed cistern UP300, UP320 and UP720• For front actuation• For use with Geberit Sigma concealed cistern 8 cm (UP720 and
UP700)• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Brushed stainless steel
Application
• For installation in vandal resistant systems• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Bespoke cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For installation in vandal resistant systems• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Die-cast zinc / plastic
Article no. Colour PU1 PU2
115.788.DW.1 Black RAL 9005 1 5
115.788.11.1 White 1 5
115.788.EP.1 Pergamon 1 5
Actuation force < 20 N
Product material Brass / chrome-plated die-cast zinc
Article no. Colour PU1 PU2
115.788.GH.1 Brushed stainless steel 1 5
164
246 14
164
246 14
Actuation force < 20 N
Product material Brass / chrome-plated die-cast zinc
Article no. Colour PU1 PU2
115.785.GH.1 Brushed stainless steel 1 5
Actuation force < 20 N
Article no. PU1 PU2
115.785.00.1 1 5
164
246 14
164
246 14
16 Product and Installation Guide Washroom & Bathroom 2011
Product GuideWC flush plates
Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Glass cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Sigma50 dual flush plate for UP320 and UP720, Anti Vandal - Plastic cover
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• For Geberit concealed cistern UP300• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Sigma60 dual flush plate for UP320 and UP720, Brushed chrome New
Application
• For dual flush• For Geberit concealed cistern UP320 and UP720• For front actuation• For use with plaster boarding/panelling 18 - 60 mm • Not suitable for use with UP300 and UP700 concealed cisterns
Characteristics
• Surface even actuation• For use with tiles 6–18 mm• Sound-absorbing actuator rods, tool-free, fast adjustment
Product Details
Ordering Information
Sigma60 cover frame, Brushed chrome New
Application
• For use with Geberit Sigma60 flush plate
Product Details
Ordering Information
Actuation force < 20 N
Product material Die-cast zinc / glass
Article no. Colour PU1 PU2
115.785.SC.1 White with ornament x 1 5
115.785.SD.1 Smoked glass reflective 1 5
115.785.SE.1 Green glass satinised 1 5
Actuation force < 20 N
Product material Die-cast zinc / plastic
Article no. Colour PU1 PU2
115.785.11.1 White alpine 1 5
115.785.DW.1 Black RAL 9005 1 5
115.785.EP.1 Pergamon 1 5
164
246 14
164
246 14
Product material Die-cast zinc
Article no. PU1
115.792.GH.1 1
Product material Die-cast zinc
Article no. PU1
242.544.GH.1 1
139
221 18−6 06−18
15
246
164
06
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2011 17
Insert for in-cistern blocks for Sigma10, 20 and 50 flush plates for UP320
Application
• For Geberit concealed cistern UP300 and UP320• For front actuation• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for UP720, UP200, Twinline and Artline cisterns• Not suitable for use with the following flush plates: Sigma60, Samba,
Bolero, Rumba, Tango, Mambo, Twist
Additional NoteCover; Receptacle for in-cistern blocks; Mounting frame with swivelling mechanism
Ordering Information
Samba dual flush plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Bolero dual flush plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For dual flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Article no. PU1 PU2
115.612.00.1 1 5
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.770.10.1 Bahama beige 1 10 180
115.770.11.1 White 1 10 180
115.770.21.1 Gloss chrome 1 10 180
115.770.46.1 Matt chrome 1 10 180
115.770.CG.1 Manhattan 1 10 180
115.770.DK.1 Edelweiss 1 10 180
115.770.DT.1 Fine brass 1 10
115.770.DW.1 Black RAL 9005 1 10 180
115.770.EP.1 Pergamon 1 10 180
115.770.FB.1 Agais 1 10
115.770.FR.1 Star white 1 10 180
115.770.GM.1 Satinox 1 10 180
115.770.KB.1 Gloss chrome / structured chrome 1 10 180
1-95
164
246 15
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.777.10.1 Bahama beige 1 10
115.777.11.1 White 1 10 180
115.777.21.1 Gloss chrome 1 10 180
115.777.46.1 Matt chrome 1 10 180
115.777.CG.1 Manhattan 1 10
115.777.DK.1 Edelweiss 1 10
115.777.DT.1 Fine brass 1 10
115.777.DW.1 Black RAL 9005 1 10
115.777.EP.1 Pergamon 1 10 180
115.777.FB.1 Agais 1 10
115.777.FR.1 Star white 1 10
115.777.GM.1 Satinox 1 10
115.777.KB.1 Gloss chrome / structured chrome 1 10 180
164
246 14
18 Product and Installation Guide Washroom & Bathroom 2011
Product GuideWC flush plates
Tango single flush plate for UP320 and UP720, Anti Vandal
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For single flush• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Rumba single flush plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For single flush• Not suitable for UP200, Twinline and Artline cisterns
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Mambo single flush plate for UP320 and UP720, Anti Vandal
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For single flush• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Artline dual flush plate for UP200
Application
• For Geberit concealed cisterns UP200 and Artline• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.760.11.1 White 1 10 180
115.760.21.1 Gloss chrome 1 10 180
115.760.45.1 Gold-plated 1 10
115.760.46.1 Matt chrome 1 10 180
115.760.DT.1 Fine brass 1 10
115.760.GM.1 Satinox 1 10
115.760.HC.1 Palladium 1 10
115.760.KA.1Gloss chrome / matt chrome
1 10
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.750.11.1 White 1 10 180
115.750.21.1 Gloss chrome 1 10 180
115.750.46.1 Matt chrome 1 10 180
115.750.KB.1Gloss chrome / structured chrome
1 10
164
2461
164
246
15
Actuation force < 20 N
Product material Stainless steel
Article no. PU1 PU2 PU4
115.751.00.1 1 10 180
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.666.11.1 White 1 10 200
115.666.21.1 Gloss chrome 1 10 200
115.666.46.1 Matt chrome 1 10 200
164
246 25
142
213
16
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2011 19
Kappa20 dual flush plate for UP200
Application
• For Geberit concealed cisterns UP200 and Artline• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Kappa21 dual flush plate for UP200
Application
• For Geberit concealed cistern UP200• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns
Product Details
Additional NoteMounting frame; Actuator rods; Distance bolts; Fastening material
Ordering Information
Kappa50 dual flush plate for UP200
Application
• For Geberit concealed cisterns UP200 and Artline• For top or front actuation• For dual flush• Not suitable for UP720, UP300, UP320 and Twinline cisterns
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Small access/cover plate for UP200
Application
• For Geberit concealed cisterns UP200 and Artline• Not suitable for UP720, UP300, UP320 and Twinline cisterns
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.228.10.1 Bahama beige 1 10
115.228.11.1 White 1 10 200
115.228.21.1 Gloss chrome 1 10 200
115.228.46.1 Matt chrome 1 10 200
115.228.CG.1 Manhattan 1 10
115.228.DK.1 Edelweiss 1 10
115.228.DT.1 Fine brass 1 10
115.228.DW.1 Black RAL 9005 1 10
115.228.EP.1 Pergamon 1 10 200
115.228.FB.1 Agais 1 10
115.228.FR.1 Star white 1 10
115.228.GM.1 Satinox 1 10
115.228.KB.1 Gloss chrome / structured chrome 1 10
Actuation force < 20 N
Product material Plastic
Article no. Colour
115.240.KJ.1 White / gloss chrome / white
115.240.KH.1 Gloss chrome / matt chrome / gloss chrome
115.240.KM.1 Black / gloss chrome / black
115.240.KK.1 White / gold-plated / white
115.240.KL.1 White / matt chrome / matt chrome
115.240.KN.1 Matt chrome / gloss chrome / matt chrome
142
213 16
142
212 14
Actuation force < 20 N
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.260.11.1 White 1 10 180
115.260.21.1 Gloss chrome 1 10 180
115.260.46.1 Matt chrome 1 10 180
115.260.HC.1 Palladium 1 10
115.258.00.1 Stainless steel 1 10
Product material Plastic
Article no. Colour PU1
115.680.11.1 White 1
115.680.21.1 Gloss chrome 1
211
142
15
142
213
20 Product and Installation Guide Washroom & Bathroom 2011
Product GuideWC flush plates
Large access/cover plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Large access/cover plate for UP320 and UP720
Application
• For Geberit concealed cistern UP300, UP320 and UP720• Not suitable for UP200, Twinline and Artline cisterns
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Extension set for flush plates
Application
• For Geberit concealed cistern UP300, UP320 and UP720• For extending flush plates up to an outer wall of max. 180 mm• For Sigma10, Sigma20, Sigma50, Rumba, Samba, Bolero, Tango,
Twist, Mambo and Kappa flush plates• For Artline flush plates with UP200 cistern• Not suitable for Artline plates with Artline cistern
Additional Note2 extensions for push rods; 2 extensions for distance rods; Fastening material
Ordering Information
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.765.46.1 Matt chrome 1 10 180
Product material Stainless steel
Article no. PU1 PU2 PU4
115.798.00.1 1 10 180
164
246
164
246
Article no. PU1 PU2
240.938.00.1 1 10
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2011 21
Remote flushing kits
HyTouch pneumatic short wall palm push button plastic with actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline
• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for UP720, AP123 or low height cisterns
Characteristics
• Round design• 53 mm hole required
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
HyTouch pneumatic short wall palm push button plastic without actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cistern AP123
• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline
cisterns
Characteristics
• Round design• 53 mm hole required
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
HyTouch pneumatic short wall finger push button metal with actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP720, AP123 or low height cisterns
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
HyTouch pneumatic short wall finger push button metal without actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cistern AP123
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline
cisterns
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
Remote flushing kits
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.114.11.1 White 1 10 240
115.114.21.1 Gloss chrome 1 10 240
Actuation force < 25 N
Article no. Colour PU1 PU2 PU3
241.199.11.1 White 1 10 100
241.199.21.1 Gloss chrome 1 10 100
6
17-25
62 52
43
6
17-25
62 52
43
Actuation force < 25 N
Article no. Colour PU1 PU3 PU4
115.947.00.1 1 12
115.947.21.1 Gloss chrome 1 12 360
Actuation force < 25 N
Article no. Colour PU1 PU3
241.198.21.1 Gloss chrome 1 12
241.198.00.1 1
122
0 - 30
63
63
122
0 - 30
22 Product and Installation Guide Washroom & Bathroom 2011
Product GuideRemote flushing kits
HyTouch pneumatic short wall palm push button metal with actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for UP720, AP123 or low height cisterns
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
HyTouch pneumatic short wall palm push button metal without actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cistern AP123
• For single flush• For wall thicknesses of 0 - 30 mm• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline
cisterns
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
HyTouch pneumatic long wall push button metal - single flush
Application
• For pneumatic remote flush actuation of Geberit concealed cistern AP123
• For single flush• For wall thicknesses of 0 - 170 mm• Not suitable for UP200, UP720, UP300, UP320, Artline and Twinline
cisterns
Product Details
Additional NotePneumatic flush button with bellows and sleve
Ordering Information
HyTouch pneumatic long wall push button metal - single flush
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns AP123, UP200, UP300, UP320, Artline and Twinline
• For single flush• For wall thicknesses of 60 - 270 mm• Not suitable for UP720
Characteristics
• Round design• 45 mm hole required
Product Details
Additional NotePneumatic actuation unit; 2 m air hose
Ordering Information
Actuation force < 25 N
Article no. Colour PU1 PU3
115.949.21.1 Gloss chrome 1 12
Actuation force < 25 N
Article no. Colour PU1
241.282.21.1 Gloss chrome 1
63
122
0 - 30
63
122
0 - 30
Actuation force < 25 N
Article no. PU1 PU2
241.144.00.1 1 8
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.943.21.1 Gloss chrome 1 10 120
63
264
0 - 170
37
6-27
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2011 23
HyTouch pneumatic hand push button - single flush
Application
• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, Artline and Twinline
• For single flush• Not suitable for UP720
Characteristics
• Square design
Product Details
Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material
Ordering Information
HyTouch pneumatic hand push button - dual flush
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline
• For dual flush• Not suitable for UP720, AP123 or low height cisterns
Characteristics
• Square design
Product Details
Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material
Ordering Information
HyTouch pneumatic finger push button - dual flush
Application
• For pneumatic remote flush actuation of Geberit concealed cisterns UP200, UP300, UP320, Artline and Twinline
• For dual flush• 65 mm hole required• Not suitable for UP720 and AP123
Characteristics
• Round design
Product Details
Additional NotePneumatic actuation unit; 2 m air hose
Ordering Information
HyTouch mechanical finger push button - dual flush, plastic New
Application
• For drywall construction• For Geberit concealed cistern UP200• For dual flush• Not suitable for UP300, UP320, UP720, Twinline, AP123 or furniture
cisterns
Characteristics
• Flush actuation using cable actuator• Actuator made of plastic• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required
Product Details
Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material
Ordering Information
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.941.11.1 White 1 10 120
115.941.KA.1 Gloss chrome / matt chrome 1 10 120
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.942.11.1 White 1 10 120
115.942.KA.1 Gloss chrome / matt chrome 1 10 120
108
108
108
108
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.999.21.1 Gloss chrome 1 10 240
Product material Plastic
Article no. PU1 PU2
115.075.21.1 1 10
8
8 9
M64x2
min. 15- max. 18
Ø 65 ø 45
85
52
13
035
24 Product and Installation Guide Washroom & Bathroom 2011
Product GuideRemote flushing kits
HyTouch mechanical finger push button - dual flush, metal New
Application
• For drywall construction• For Geberit concealed cistern UP200• For dual flush• Not suitable for UP300, UP320, UP720, Twinline, AP123 or furniture
cisterns
Characteristics
• Flush actuation using cable actuator• Actuator made of die-cast zinc• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required
Product Details
Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material
Ordering Information
HyTouch pneumatic foot operated flush - wall mounted
Application
• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, low height cistern, Artline and Twinline
• For single flush• For installation in floor• Not suitable for UP720
Product Details
Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Fastening material
Ordering Information
HyTouch pneumatic foot operated flush - floor mounted
Application
• For pneumatic remote single flush actuation of Geberit concealed cisterns UP200, UP300, UP320, AP123, low height cistern, Artline and Twinline
• For single flush• For solid construction• For installation in floor• For drywall construction• For pneumatic remote control flush actuation of Geberit surface-
mounted and concealed cisterns• Not suitable for UP720
Product Details
Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Protection box made of EPS; Fastening material
Ordering Information
Product material Die-cast zinc
Article no. PU1 PU2
115.075.21.Z 1 10
Actuation force < 25 N
Article no. PU1 PU2 PU4
115.918.00.1 1 10 120
Ø 65 ø 45
85
52
13
035
11
154
Actuation force < 25 N
Article no. PU1 PU2 PU4
115.939.00.1 1 10 120
33
12
12
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2011 25
HyTronic automatic infra-red WC flush for UP720, mains power New
Application
• For use with UP720 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP300, UP320, UP200, Artline, Twinline, AP123 or
low height furniture cisterns
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using HyTronic Clean Handy• Flush actuation settings can be made and checked, using HyTronic
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Push rod; Distance rods; Fastening material
Excluded: Power supply unit
Ordering Information
HyTronic automatic infra-red WC flush for UP320, mains power
Application
• For use with Geberit UP300 and UP320 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP200, UP720 Artline, Twinline, AP123 or low height
furniture cisterns
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using HyTronic Clean Handy• Flush actuation settings can be made and checked, using HyTronic
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Cover; Push rod; Distance rods; Fastening material
Excluded: Power supply unit
Ordering Information
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. PU1
115.855.00.1 1
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. PU1
115.890.00.1 1
26 Product and Installation Guide Washroom & Bathroom 2011
Product GuideRemote flushing kits
HyTronic automatic infra-red WC flush for UP320, battery powered
Application
• For use with Geberit UP300 and UP320 concealed cistern• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for UP200, UP720 Artline, Twinline, AP123 or low height
furniture cisterns
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using HyTronic Clean Handy• Flush actuation settings can be made and checked, using HyTronic
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control and battery compartment, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; 2 batteries, each 1.5 V LR20 alkaline; Cover; Push rod; Distance rods; Fastening material
Ordering Information
HyTronic infra-red sensor flush
Application
• For automatic flush actuator of UP300 and UP320 concealed cistern• For single flush• Not suitable for UP200, UP720, Twinline, AP123, low height cisterns
and Artline cisterns
Product Details
Additional NotePower supply unit; Installation phase box for power supply unit; Electrical lifting device for flush valve with control electronics
Ordering Information
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 3 V DC
Battery type LR20
Article no. PU1
115.891.00.1 1
Product material Stainless steel
Nominal voltage 230 V AC
Operating voltage 4.1 V DC
Article no. Colour PU1
115.857.00.1 Stainless steel 1
115.857.21.1 Gloss chrome 1
0008
NA4V1_V0.1
20.6.02
43
33
0 - 30
Product GuideDuofix basin frames
Product and Installation Guide Washroom & Bathroom 2011 27
Duofix basin frames
Duofix basin frame 1.12 m
Application
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm
Characteristics
• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Duofix basin frame 0.82 / 0.98 m
Application
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 38 - 58 cm)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 820 / 980 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Duofix basin frames
Article no. PU1
111.495.00.1 1
80
52
112
76
50
100
0-20
0
5-38
73
306
153
7
48
85
0
6
Article no. PU1
111.494.00.1 1
52
80
98(82)
76
50
0-20
0
5-38
73
306
153
7
48
6
85
0
28 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
Duofix basin frame 1.12 - 1.3 m for wall mounted taps
Application
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm• For washbasin with concealed wall-mounted tap• Disc for mounting the concealed wall-mounted tap
Characteristics
• Frame height 1120 mm to 1300 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening for outlet bend, adjustable height• Fastening plate for concealed fittings, veneered wood, waterproof
bonded, adjustable in height and depth• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)
Additional NoteOutlet bend ø 50 mm; Seal ø 44/32 mm; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Sound dampening set for washbasin
Application
• For solid-borne noise insulation with washbasins
Product Details
Additional Note2 acoustic insulation sleeves
Ordering Information
Taps
HyTronic60 infra-red sensor tap without mixer, mains powered
Application
• For cold or mixed water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; Metal-reinforced hose R 3/8"; Filter; Fastening material
Excluded: Power supply unit
Ordering Information
Article no. PU1 PU4
111.493.00.1 1 10
Product material PE expanded
Article no. PU1
156.051.00.1 1
50
0-20
0
73
80
52
112-130
5-38
48
85
0
11
60
20
05
Taps
Max. operating temperature mixed water 45 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.740.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 29
HyTronic60 infra-red sensor tap without mixer, battery powered
Application
• For cold or mixed water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional Note6 V battery; Metal-reinforced hose R 3/8"; Filter; Fastening material
Ordering Information
HyTronic60 infra-red sensor tap with mixing lever, mains powered
Application
• For cold and hot water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material
Excluded: Power supply unit
Ordering Information
Max. operating temperature mixed water 45 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1 PU4
115.733.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.738.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
30 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic60 infra-red sensor tap with mixing lever, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Power supply by battery• Temperature adjustment via the mixer lever• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy
Product Details
Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator
Ordering Information
HyTronic60 infra-red sensor tap with internal mixing, mains powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material
Excluded: Power supply unit
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1 PU4
115.723.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.739.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 31
HyTronic60 infra-red sensor tap with internal mixing, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Power supply by battery• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy
Product Details
Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator
Ordering Information
Transformer for HyTronic60 tap
Application
• For concealed installation• For parallel connection of up to six Geberit washbasin taps with infra-
red control
Product Details
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1 PU4
115.725.21.1 Gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22 Nominal voltage 230 V AC
Mains frequency 50 Hz
Output voltage 9 V DC
Article no. PU1
241.692.00.1 1
55
55
32 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic185 infra-red sensor tap without mixer, mains powered
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic185 infra-red sensor tap without mixer, battery powered
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material
Ordering Information
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Article no. Colour PU1 PU4
116.135.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Article no. Colour PU1 PU4
116.235.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 33
HyTronic185 infra-red sensor tap with mixing lever, mains powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic185 infra-red sensor tap with mixing lever, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.155.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.255.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
34 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic185 infra-red sensor tap with internal mixing, mains powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic185 infra-red sensor tap with internal mixing, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.145.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.245.21.1 Gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 35
HyTronic186 infra-red sensor tap without mixer, mains powered
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic186 infra-red sensor tap without mixer, battery powered
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material
Ordering Information
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Article no. Colour PU1 PU4
116.136.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Article no. Colour PU1 PU4
116.236.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
36 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic186 infra-red sensor tap with mixer lever, mains powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic186 infra-red sensor tap with mixer lever, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.156.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.256.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 37
HyTronic186 infra-red sensor tap with internal mixing, mains powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
HyTronic186 infra-red sensor tap with internal mixing, battery powered
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.146.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Operating pressure 0.5–8 bar
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.246.21.1 Gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
38 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic87 infra-red sensor tap without mixer, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
HyTronic87 infra-red sensor tap with mixer lever, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Max. operating temperature mixed water 45 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.107.21.1 Gloss chrome 1 60
13
13R1/2
15
5525°
25°
165
14
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.127.21.1 Gloss chrome 1 60
13
13R1/2R1/2
15
5525°
25°
165
14
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 39
HyTronic87 infra-red sensor tap with internal mixing, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
HyTronic88 infra-red sensor tap without mixer, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.117.21.1 Gloss chrome 1 60
13
13R1/2R1/2
15
5525°
25°
165
14
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Max. operating temperature mixed water 45 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.108.21.1 Gloss chrome 1 60
13
13R1/2
215
19
15
5525°
25°
40 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTaps
HyTronic88 infra-red sensor tap with mixer lever, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
HyTronic88 infra-red sensor tap with internal mixing, mains powered
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.128.21.1 Gloss chrome 1 60
13
13R1/2R1/2
215
19
15
5525°
25°
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.118.21.1 Gloss chrome 1 60
13
13R1/2R1/2
215
19
15
5525°
25°
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2011 41
Transformer for HyTronic185/186 and HyTronic87/88
Application
• For power supply of HyTronic87/88 and HyTronic185/186 outlet taps
Characteristics
• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage
Product Details
Ordering Information
Roughing box and transformer for HyTronic185/186 and HyTronic87/88
Application
• For concealed installation in solid or drywall construction• For power supply of HyTronic87/88 and HyTronic185/186 outlet taps
Characteristics
• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage
Product Details
Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m
Ordering Information
HansaVarox box for HyTronic87 and 88
Characteristics
• MeplaFix system elbow made from dezincification-resistant brass• Acoustically decoupled• For mounting HyTronic87/88 wall-hung taps
Additional Note2 MeplaFix system elbows, pre-mounted; 1 MeplaFix system elbow, loose, with seal; Rubber collar; Fastening ring
Ordering Information
Nominal voltage 230 V AC
Output voltage 12 V AC
Article no. PU1
241.672.00.1 1
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Output voltage 12 V AC
Protection degree IP 20
Article no. PU1
241.631.00.1 1
77
77
Article no. R''
Dcm
D1cm
Hcm
Lcm
L1cm
lcm
Zcm
616.030.00.1 MF 1/2 10,4 11 7 14 11 2 5,5
L
RR
Z
H H
Z
D1
L1
l
D
42 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix bidet frames
Duofix bidet frames
Duofix bidet frame 1.12 m
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm
Characteristics
• Frame height 1120 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Duofix bidet frame 0.98 m
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 980 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Duofix bidet frames
Article no. PU1
111.545.00.1 1
8090
100110
120130
140150
160170
180190
200210
220230
240250
260270
280290
300310
320330
340 350
360 964.161.00.0
8090100110
120130140150
160170180190
200210220230
240250260270
280290300310
320330340 350
360 964.162.00.0
964.160.00.0
112
50
100
0-20
0
73
18/238-38
48
10
0-20
4
0
Article no. PU1
111.544.00.1 1
964.160.00.0
964.160.00.0
98
50
0-20
0
73
18/23
8-38
48
10
0-20
4
0
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 43
Duofix bidet frame 0.82 m
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 820 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Duofix urinal frames
Duofix urinal frame with pipe interruptor for mains fed water supply
Application
• For installation of wall-hung urinals• For installation in a half-height Duofix system wall in front of a solid or
drywall construction• For installation in a room-high Duofix system wall in front of a solid or
drywall construction• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For mains fed water supply (note: Geberit urinal controls need a
minimum 1 bar supply)• For Geberit concealed urinal control• Not suitable for urinals with spreaders
Characteristics
• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt • Protection housing for service opening, can be cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and
distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories• Mechanical pipe interruptor for mains water connection• Please see page 119 for details of pipe interruptor drainage installation
Article no. PU1
111.543.00.1 1
8090
100110
120130
140150
160170
180190
200210
220230
240250
260270
280290
300310
320330
340 350
360 964.161.00.0
8090100110
120130140150
160170180190
200210220230
240250260270
280290300310
320330340 350
360 964.162.00.0
964.160.00.0
82
50
0-20
0
73
18/23
8-38
48
10
0-20
4
0
Duofix urinal frames
1300
320-360
0-200
0
73
500
75-330
R1/2
1000
75 90
48
0
1180
44 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material
Excluded: Urinal flushing system
Ordering Information
Duofix urinal frame for tank fed water supply
Application
• For installation of wall-hung urinals• For tank fed water supply (note: Geberit urinal controls need a
minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
• For installation in a half-height Duofix system wall in front of a solid or drywall construction
• For installation in a room-high Duofix system wall in front of a solid or drywall construction
• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For Geberit concealed urinal control• Not suitable for urinals with spreaders
Characteristics
• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt • Protection housing for service opening, can be cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and
distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the element. (Friction feet
have to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories
Product Details
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Relative humidity < 100 %
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Article no. PU1
111.622.00.1 1
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Relative humidity < 100 %
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
112-130
17-37
max. 65
0-20
0
min. 9
12-32
73
50
75-33
R1/2
48
75 9
100-118
0
0-20
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 45
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material
Excluded: Urinal flushing system
Ordering Information
Urinal installation set universal
Application
• For concealed installation in solid constructions• For accommodating the HyTronic infra-red urinal controls or HyTouch
pneumatic urinal controls• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
• For tank fed water supply (note: Geberit urinal controls need a minimum 1 bar supply)
Characteristics
• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt • Protection housing for service opening, can be cut to length
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"
Ordering Information
Article no. PU1 PU4
111.623.00.1 1 14
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Relative humidity 95 %
Operating temperature water max. 30 °C
Article no. PU1
116.001.00.1 1
15
105
117
R1/2
15
105
7 1-9
46 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
Urinal installation set universal with flush pipe
Application
• For concealed installation in solid constructions• For accommodating the HyTronic infra-red urinal controls or HyTouch
pneumatic urinal controls• For tank fed water supply (note: Geberit urinal controls need a
minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
Characteristics
• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt • Protection housing for service opening, can be cut to length
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Flush pipe D32
Ordering Information
Duofix mounting plate for urinal division
Application
• For installation in a half-height Duofix system wall in front of a solid or drywall construction
• For installation in a room-high Duofix system wall in front of a solid or drywall construction
• For installation in a load bearing stud wall• For installation of urinal division
Characteristics
• Multi-layered, water-resistant bonding• Veneered wood plate• Can be cut to reduce distance between urinals
Product Details
Additional Note8 fastening brackets; Fastening material
Ordering Information
Urinal division
Application
• For separating urinals mounted adjacent to one another
Characteristics
• Plastic urinal partition with concealed fastening• Corrosion-resistant bracket, hard-anodised surface
Additional NoteDistance bolts; Fastening material
Ordering Information
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Relative humidity 95 %
Operating temperature water max. 30 °C
Article no. PU1
116.003.00.1 1
max. 61
15
105
R1/2
15
105
7 1-9
Product material Wood
Article no. PU1 PU4
111.859.00.1 1 40
Article no. Colour PU1 PU4
115.200.11.1 White 1 16
35
50
74
44
92-98
0
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 47
Glass urinal division
Application
• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions
Characteristics
• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides
Product Details
Additional NoteWall bracket; Cover; Fastening material
Ordering Information
Glass urinal division
Application
• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions
Characteristics
• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides
Product Details
Additional NoteWall bracket; Cover; Fastening material
Ordering Information
HyTouch hand operated pneumatic urinal control, Sigma10
Application
• For manual flush actuation of urinals• For assembly in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Plastic actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Product material ESG - (toughened safety glass)
Article no. Colour PU1 PU4
115.210.CD.1 Opaque grey 1 15
115.210.GT.1 Opaque green 1
Product material ESG - (toughened safety glass)
Article no. Colour PU1 PU4
115.214.CD.1 Opaque grey 1 15
115.214.GT.1 Opaque green 1 15
9350
525
95-105
0 4
08
35
75
75
80
496
95-105
0
50
35
4
08
75
75
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.015.KH.1 Gloss chrome / matt chrome / gloss chrome 1
116.015.KJ.1 White / gloss chrome / white 1
116.015.KK.1 White / gold-plated / white 1
116.015.KL.1 White / matt chrome / matt chrome 1
116.015.KM.1 Black / gloss chrome / black 1
116.015.KN.1 Matt chrome / gloss chrome / matt chrome 1
13
13
13
48 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
HyTronic infra-red urinal control, mains powered, Sigma10
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, battery powered, Sigma10
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.025.KH.1 Gloss chrome / matt chrome / gloss chrome 1
116.025.KJ.1 White / gloss chrome / white 1
116.025.KK.1 White / gold-plated / white 1
116.025.KL.1 White / matt chrome / matt chrome 1
116.025.KM.1 Black / gloss chrome / black 1
116.025.KN.1 Matt chrome / gloss chrome / matt chrome 1
13
13
1
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.035.KH.1 Gloss chrome / matt chrome / gloss chrome 1
116.035.KJ.1 White / gloss chrome / white 1
116.035.KK.1 White / gold-plated / white 1
116.035.KL.1 White / matt chrome / matt chrome 1
116.035.KM.1 Black / gloss chrome / black 1
116.035.KN.1 Matt chrome / gloss chrome / matt chrome 1
13
13
1
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 49
HyTouch hand operated pneumatic urinal control, Sigma50 - bespoke cover
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
HyTouch hand operated pneumatic urinal control, Sigma50
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.016.00.1 Bespoke 1
13
13
14
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.016.11.1 White alpine 1
116.016.DW.1 Black RAL 9005 1
116.016.EP.1 Pergamon 1
116.016.SE.1 Green satinised 1
116.016.SD.1 Smoked glass reflective 1
116.016.SC.1 White with ornament x 1
13
13
14
50 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
HyTronic infra-red urinal control, mains powered, Sigma50
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, battery powered, Sigma50
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.026.GH.1 Brushed chrome 1
13
13
1
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.036.GH.1 Brushed chrome 1
13
13
1
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 51
HyTouch hand operated pneumatic urinal control, Samba
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Plastic actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, mains powered, Samba
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.011.11.1 White alpine 1
116.011.21.1 Gloss chrome 1
116.011.46.1 Matt chrome 1
13
13
09
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.021.11.1 White alpine 1
116.021.21.1 Gloss chrome 1
116.021.46.1 Matt chrome 1
13
13
09
52 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
HyTronic infra-red urinal control, battery powered, Samba
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
HyTouch hand operated pneumatic urinal control, Bolero
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Plastic actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.031.11.1 White alpine 1
116.031.21.1 Gloss chrome 1
116.031.46.1 Matt chrome 1
13
13
09
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.012.11.1 White alpine 1
116.012.21.1 Gloss chrome 1
116.012.46.1 Matt chrome 1
13
13
12
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 53
HyTronic infra-red urinal control, mains powered, Bolero
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, battery powered, Bolero
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.022.11.1 White alpine 1
116.022.21.1 Gloss chrome 1
116.022.46.1 Matt chrome 1
13
13
12
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.032.11.1 White alpine 1
116.032.21.1 Gloss chrome 1
116.032.46.1 Matt chrome 1
13
13
12
54 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
HyTouch hand operated pneumatic urinal control, Mambo
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Stainless steel actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, mains powered, Mambo
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.013.FW.1 Brushed stainless steel 1
13
13
13
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.023.FW.1 Brushed stainless steel 1
13
13
11
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2011 55
HyTronic infra-red urinal control, battery powered, Mambo
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
HyTouch hand operated pneumatic urinal control, Tango
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the actuator button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc actuator plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.033.FW.1 Brushed Stainless steel 1
13
13
11
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.014.11.1 White alpine 1
116.014.21.1 Gloss chrome 1
116.014.46.1 Matt chrome 1
13
13
11
56 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDuofix urinal frames
HyTronic infra-red urinal control, mains powered, Tango
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
HyTronic infra-red urinal control, battery powered, Tango
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with HyTronic Service Handy• Flush actuation can be deactivated using HyTronic Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.024.11.1 White alpine 1
116.024.21.1 Gloss chrome 1
116.024.46.1 Matt chrome 1
13
13
08
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.034.11.1 White alpine 1
116.034.21.1 Gloss chrome 1
116.034.46.1 Matt chrome 1
13
13
08
Product GuideAccessories
Product and Installation Guide Washroom & Bathroom 2011 57
Accessories
Duofix full height stud
Application
• For creating a load bearing stud wall• For installation in a room-high Duofix system wall• For installing as intermediate or connecting element• For fastening Duofix installation elements and Duofix cross bars• Suitable for installation under sloping roofs up to 50° roof slope
Characteristics
• Galvanised• Height-adjustable (telescopic)
Product Details
Additional Note1 rail clip; Fastening bracket; Fastening material
Ordering Information
Duofix support bracket leg and bracket
Application
• For installation in split-height PreWall construction in front of a solid or drywall construction
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For a screed of 0 - 200 mm
Characteristics
• Element height 820 - 1300 mm• Self-supporting• Support for lateral panelling• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Rotating foot plate, for installation in UW50 and UW75 profiles• Powder-coated, colour Geberit blue
Product Details
Additional NoteRear wall fastening; 2 rail clips; Fastening material
Ordering Information
Duofix system rail
Application
• For construction of Duofix PreWall or partition wall• For erecting room-high Duofix system wall
Characteristics
• Galvanised
Additional Note2 U-rails; Fastening material
Ordering Information
Accessories
Product material Steel
Article no. Hcm
hcm
PU1
111.871.00.1 220 - 280 211 1
111.872.00.1 260 - 320 251 1
111.873.00.1 300 - 360 291 1
111.874.00.1 340 - 400 331 1
h
H
47
5
47
5
Product material Steel
Article no. PU1 PU2 PU4
111.830.00.1 1 5 50
Article no. PU1 PU4
111.878.00.1 1 80
82-130
4
0-20
0
73
4
48
300
5
34
58 Product and Installation Guide Washroom & Bathroom 2011
Product GuideAccessories
Duofix support brackets for shallow WC
Application
• For additional support of WC pans with contact surfaces (x) smaller than 170 mm
• For use with Duofix WC frames
Characteristics
• U-profiles, galvanised
Product Details
Ordering Information
Duofix feet-fixing to backwall
Application
• For alternatively fastening the feet of Duofix elements to the rear wall instead of the floor
Characteristics
• Galvanised• Adjustable depth, 130 - 200 mm
Product Details
Additional NoteFastening material
Ordering Information
Duofix support brackets for large washbasin
Application
• For fastening washbasins with a fastening distance larger than 380 mm to Duofix frame for washbasin
Characteristics
• Fastening distance adjustable 380 - 580 mm• Galvanised
Product Details
Additional NoteFastening material
Ordering Information
Duofix extension angle brackets
Application
• For fastening Duofix frames between two studs with a distance of 50 - 65 cm
Characteristics
• Galvanised
Product Details
Additional NoteFastening material
Ordering Information
Product material Steel
Article no. PU1
111.847.00.1 1
Product material Steel
Article no. PU1
111.867.00.1 1
X
13 - 20
Product material Steel
Article no. PU1
111.868.00.1 1
Product material Steel
Article no. PU1
111.869.00.1 1
Product GuideAccessories
Product and Installation Guide Washroom & Bathroom 2011 59
Duofix PreWall brackets - Universal
Application
• For fastening Duofix frames in Duofix system rail• For fastening Duofix frames in front of solid or drywall construction
Characteristics
• Galvanised• Adjustable depth, 130 - 200 mm
Product Details
Additional Note2 Duofix PreWall brackets for system; 2 rail clips; 2 panelling supports, push-in; Fastening material
Ordering Information
Duofix PreWall brackets with extension set
Application
• For fastening Duofix frames in front of solid or drywall construction• Not suitable for use with Duofix system rail
Characteristics
• Galvanised• Adjustable depth, 130 - 400 mm
Product Details
Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; 2 Duofix PreWall bracket extensions M10 with long nut; 2 panelling supports, push-in; Fastening material
Ordering Information
Duofix corner PreWall brackets
Application
• For universal fastening of Duofix installation elements to a solid or drywall construction
Characteristics
• Variable angle adaptation for corner installation• Adjustable depth, 140 - 200 mm• Galvanised
Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; Fastening material
Excluded: Panelling supports, push-in
Ordering Information
Duofix PreWall extension bolts
Application
• For extending Duofix wall anchorings from 200 - 400 mm
Product Details
Additional Note2 M10 threaded rods with long nut
Ordering Information
Galvanised plasterboard screw
Application
• For fastening of the panelling and Aqua plasterboard panels to the Duofix support system
Characteristics
• Self-drilling screws 4.2 x 35 mm
Ordering Information
Product material Die-cast zinc
Article no. PU1 PU2 PU4
111.844.00.1 1 8 384
Product material Die-cast zinc
Article no. PU1
111.843.00.1 1
13-20
13-20
Article no. PU1 PU2 PU4
111.835.00.1 1 20 560
Product material Die-cast zinc
Article no. PU1 PU2 PU4
111.887.00.1 1 10 2000
Article no. PU2 PU3 PU4
461.030.00.1 200 2000 20000
14-20
220 M10
60 Product and Installation Guide Washroom & Bathroom 2011
Product GuideAccessories
Duofix insulating strip
Application
• To avoid the formation of cracks between Duofix panelling and building structure
Characteristics
• Single-sided self-adhesive• Permanently elastic• Vinyl foam tape
Ordering Information
HyTronic Service Handy
Application
• For setting and enquiry of setting values of various electronic Geberit products such as washbasin taps, WC flush actuators, urinal controls and sanitary flushings
Characteristics
• 4-line display• Menu guidance• Saving and transfer of settings to other control units of the same type• Compatible with existing control units• Data transmission with infra-red light• Battery-operated
Additional NotePouch; 3 batteries type AAA 1.5 V
Ordering Information
HyTronic Clean Handy
Application
• For deactivation of infra-red controlled Geberit flushing valves and flush actuators for sanitary cleaning
Characteristics
• Remote control
Additional NoteConcise instructions
Ordering Information
Low flush beaker for UP200
Application
• For Geberit concealed cistern UP200• For reducing flushing volumes to 4.5 l and 3l or 4 l and 2.6 l• Should only be used in conjunction WCs suitable for low flushing
volumes
Ordering Information
Low flush beaker for UP320
Application
• For Geberit concealed cistern UP300 and UP320• For reducing flushing volumes to 4l and 2l flush• Should only be used in conjunction WCs suitable for low flushing
volumes
Ordering Information
Monolith wall-hung leg supports New
Application
• For supporting Geberit wall-hung Monolith sanitary modules on drywall construction and low load bearing walls
Ordering Information
Article no. PU1 PU4
111.889.00.1 1 60
Article no. PU1
115.860.00.1 1
Article no. PU1 PU2
115.831.00.1 1 10
30 m
1
8
Article no. PU1
242.310.00.1 1
Article no. PU1
241.894.00.1 1
Article no. PU1
131.104.00.1 1
Product GuideAccessories
Product and Installation Guide Washroom & Bathroom 2011 61
Monolith support brackets for shallow wall-hung WC
Ordering Information
Monolith bottom water connection set
Application
• For use in bottom connections
Ordering Information
Article no.
131.105.00.1
Article no. PU1
131.074.00.1 1
X
62 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDrainage
Drainage
Duofix straight connector
Application
• For all drainage pipes• For push-on seal• For WCs with horizontal outlet• For Duofix WC frames
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Duofix WC S-Bend outlet
Product Details
Additional NoteLip seal EPDM; Sealing collar EPDM; Adhesive PVC-U
Ordering Information
Drainage
Product material PE-HD
Article no. dØmm
d1Ømm
Dcm
Lcm
lcm
Kcm
Colour PU1 PU3 PU4
366.887.16.1 90 90 11,2 31 27,5 24 Black 1 40 160
367.887.16.1 110 90 11,2 34,5 31,5 28 Black 1 30 120
Product material PVC
Article no. dØmm
ADcm
Hcm
Colour PU1 PU2 PU4
388.350.29.1 90 14,5 - 34,5 16,7 Grey 1 10 80
d1d
L
D
l
K
dAD
H
di
Product GuideDrainage
Product and Installation Guide Washroom & Bathroom 2011 63
Duofix 90° bend connector
Application
• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC elements
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Bend with connector for wall-hung WC
Application
• For all drainage pipes• For appliances with horizontal outlet
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Angle 90°
Product material PE-HD
Article no. dØmm
d1Ømm
Acm
angle Hcm
Kcm
Colour PU1 PU2 PU4
366.061.16.1 90 90 11 90° 22,5 13 Black 1 10 120
Angle 90°
Product material PE-HD
Article no. dØmm
d1Ømm
Acm
angle acm
Hcm
Kcm
Colour PU1 PU2 PU3 PU4
367.792.16.1 110 110 7,5 90° 4,5 22,5 13 Black 1 5 25 100
A
KH
d1
d
A
KH
a
d1
d
64 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDrainage
Duofix 45 ° bend connector
Application
• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC frames
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
90 / 110 mm adaptor
Application
• For all drainage pipes• For connecting 90 mm PE connectors to 110 mm sockets
Characteristics
• UV-resistant• With stop
Product Details
Additional NoteLip seal EPDM
Ordering Information
Angle 45°
Product material PE-HD
Article no. dØmm
d1Ømm
angle acm
Lcm
Kcm
Colour PU1
367.945.16.1 110 90 45° 6 8,7 3 Black 1
Product material PE-HD
Article no. d1Ømm
d2Ømm
Colour PU1 PU2 PU4
367.928.16.1 90 110 Black 1 10 600
45
d
K
d1
a
L
75
d2d1
Product GuideDrainage
Product and Installation Guide Washroom & Bathroom 2011 65
Duofix manifold connector
Application
• For all drainage pipes• For Duofix WC frames when using floats
Product Details
Additional NoteManifold connector bend; Fin seal; 50 mm length of 110 mm PVC pipe
Ordering Information
Extended Duofix WC connection set
Application
• For Duofix WC frames
Product Details
Additional Note2 cover caps
Ordering Information
Product material PVC
Article no. dØmm
angle°
Z1cm
Z2cm
Colour PU1 PU3 PU4
107.35.05B 110 5° 0,64 6,23 Black 1 12 360
F107.35.09B 110 9° 0,89 6,28 Black 1 24 720
107.35.14B 110 14° 1,09 6,47 Black 1 12 360
F107.35.18B 110 18° 1,13 6,47 Black 1 12 360
107.35.24B 110 24° 1,4 6,95 Black 1 12 360
F107.35.29B 110 29° 1,83 7,73 Black 1 12 360
107.35.34B 110 34° 1,83 7,73 Black 1 12 360
Product material PE
Article no. dØmm
d1Ømm
Lcm
L1cm
lcm
l1cm
Colour PU1 PU4
152.438.46.1 90 45 26,5 26,5 22 24 Matt chrome 1 164
Z1Z2
d d
l1
d1 55
102±5d
L1
l
L
66 Product and Installation Guide Washroom & Bathroom 2011
Product GuideDrainage
Flush pipe extension 1 m
Application
• For extension of outlet sleeves• For combination with overflow pipe cone
Product Details
Ordering Information
Monolith S-bend for wall-hung WC
Application
• For connecting wall-hung WC to floor outlet 15 - 30 cm from wall
Additional NoteS-bend, PVC; WC outlet bend, HDPE, ø 90 mm
Ordering Information
Monolith straight pipe for BTW-WC
Application
• For connecting floor-standing WC to wall outlet 18 cm from wall
Additional NoteWC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm
Ordering Information
Product material PE
Article no. dØmm
diØmm
smm
Acm²
Lm
Colour PU1 PU2 PU4
152.170.16.1 45 40 2,5 12,6 1 Black 1 5 270
Article no. Colour PU1
131.088.29.1 Grey 1
Article no. Colour PU1
131.083.16.1 Black 1
L (m)
d
s
di
Acm2
d
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2011 67
Monolith drainage connection set for BTW-WC
Application
• For connecting floor-standing WC to floor outlet 7 - 15 cm from wall
Additional NoteWC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material
Ordering Information
Monolith offset outlet pipe for wall mounted WC
Application
• For connecting wall-hung WC to wall outlet 17 - 19 cm
Additional NoteStraight connector for WC, 7 cm offset, PP, 90 mm; 2 sealing collars
Ordering Information
Monolith step pipe for wall-hung WC
Application
• For connecting wall-hung WC to wall outlet 21-23 cm
Additional NoteWC outlet pipe, 3 cm offset, HDPE, ø 90 mm
Ordering Information
Traps
Washbasin trap chrome with 1 1/4" BSP waste connection and 32 mm outlet
Application
• For washbasin
Characteristics
• Water seal with partition wall• Corrosion-resistant• Plug connection on the outlet pipe• With 32 mm / 1 1/4" waste adaptor
Product Details
Ordering Information
Article no. Colour PU1
131.082.16.1 Black 1
Article no. PU1
131.108.11.1 1
Article no. Colour PU1
131.085.11.1 White alpine 1
Traps
Depth of water seal 75 mm
Drainage capacity 0.7 l/s
Article no. Colour PU1
151.039.21.1 Gloss chrome 1
68 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTraps
Bath trap, overflow and chrome pop-up waste standard
Characteristics
• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Bath trap, overflow and chrome pop-up waste large
Characteristics
• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; T-piece; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Article no. Colour PU1 PU2
150.535.21.1 Gloss chrome 1 10
100
4340
160-30050
12040
92
180
180
Article no. Colour PU1 PU2
150.536.21.1 Gloss chrome 1 8
100
4340
160-30050
12040
92
180
180
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2011 69
Bath trap, overflow and filler, chrome pop-up waste standard
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Water inlet; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Bath trap, overflow and filler, chrome pop-up waste large
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Water inlet; T-piece; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering InformationArticle no. Colour PU1 PU2
150.712.21.1 Gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
Article no. Colour PU1 PU2
150.713.21.1 Gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
70 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTraps
PushControl bath trap, overflow and chrome pop-up waste, standard
Application
• For bathtubs with valve hole ø 52 mm• For bathtubs in standard size• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
PushControl bath trap, overflow and chrome pop-up waste, long
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special lengths• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.770.11.1 White alpine 1 10 80
150.770.21.1 Gloss chrome 1 10 80
145-26
23-46
45
59 89
14 10
4340
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.771.11.1 White alpine 1 10 80
150.771.21.1 Gloss chrome 1 10 80
24-50
23-46
45
59 89
4340
14 10
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2011 71
PushControl bath trap, overflow and chrome pop-up waste, high
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special heights• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
Extended connection set for thicker baths
Application
• For acrylic bathtubs with overflow
Additional NoteDrain valve seat extension with O-ring; Banjo bolt; Adjusting screw
Ordering Information
Shower tray trap and waste 90 mm
Application
• For shower trays with valve hole ø 90 mm• For shower trays without overflow
Characteristics
• Dip tube and dip tube support can be dismantled• Construction height 80 mm• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Screw connection ø 40 mm; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Shower tray trap and waste 50 mm
Application
• For shower trays with valve hole ø 52 mm • For shower trays without overflow
Characteristics
• Dip tube and dip tube support can be dismantled• Construction height 85 mm• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Outlet bend; Adaptor; Outlet cover
Ordering Information
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.772.11.1 White alpine 1 10 80
150.772.21.1 Gloss chrome 1 10 80
Article no. PU1
150.247.00.1 1
15-28
44-60
45
59 89
4340
14 10
27
Depth of water seal 50 mm
Drainage capacity with 15 mm head of water 0.5 l/s
Article no. Colour PU1
150.679.21.1 Gloss chrome 1
Drainage capacity 0.65 l/s
Depth of water seal 50 mm
Article no. dØ Colour PU1 PU2
150.688.21.1 40 Gloss chrome 1 10
115
02 25-
92
43 8
ø 90ø40ø43
47
03-15
85
85
47
8
ø40ø43
72 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTraps
Duofix shower element H130
Application
• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a half-height Duofix system wall in front of a solid or
drywall construction• For installation in a room-high Duofix system wall
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to
15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Mounting plate (wood) for surface-mounted and concealed taps,
height- and depth-adjustable• Mounting plate (metal) for surface-mounted taps, height-adjustable• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists
Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection
Excluded: Ready-to-fit set for shower element; Tap connections
Ordering Information
Duofix shower element H50 New
Application
• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a partial-height Duofix system wall in front of a solid
or drywall construction• For installation in a room-high Duofix system wall
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to
15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists
Product Details
Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection
Excluded: Ready-to-fit set for shower element
Ordering Information
Article no. PU1
111.731.00.1 1
50
130
100
9
55
9–20
73
0
24
77
48
11
11
0
100
65
355355
5
45°
245
24
8
16
Depth of water seal 50 mm
Article no. PU1
111.743.00.1 1
50
9
55
41
9–20
77
24
73 48
11
65
355355
5
45°
245
24
8
16
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2011 73
Ready-to-fit set for Duofix shower element, stainless steel
Application
• For use with Geberit Duofix shower element
Characteristics
• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Brushed stainless steel cover
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Ready-to-fit set for Duofix shower element, white
Application
• For use with Geberit Duofix shower element
Characteristics
• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover, white alpine
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Ready-to-fit set for Duofix shower element, gloss chrome
Application
• For use with Geberit Duofix shower element
Characteristics
• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover, gloss chrome
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Ready-to-fit set for Duofix shower element, bespoke
Application
• For use with Geberit Duofix shower element
Characteristics
• Can be removed for cleaning• Plastic sight frame, black• For customers to install a bespoke finish with a thickness of 6 mm -
26 mm
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Article no. Colour PU1 PU2
154.330.FW.1 Brushed stainless steel 1 21
Article no. Colour PU1 PU2
154.330.11.1 White alpine 1 21
Article no. Colour PU1 PU2
154.330.21.1 Gloss chrome 1 21
Article no. PU1 PU2
154.330.00.1 1 21
74 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTraps
Uniflex drain for flat showers
Application
• For the drainage of a wet room installation• For use with composite seals• For use within buildings
Characteristics
• Minimal construction height 95 mm and maximum 195 mm• Grating made of stainless steel• Sealing collar, fleece-laminated 500 x 500 mm• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Adaptor; Thin bed top piece; Grating; Rubber collar; Compensating ring; Hair trap; Seal set for use with PVC ; Protection housing; Installation aid
Ordering Information
Standard grating screwable
Application
• For Uniflex Outlet for floor even showers
Characteristics
• Can be locked with screws• Grating and screws made of stainless steel
Product Details
Additional NoteScrews
Ordering Information
Design grating - architectural, squares
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Design grating - architectural, radial
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Design grating - trendy
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Drainage capacity min. 0.45 l/s
Drainage capacity max. 0.74 l/s
Depth of water seal 50 mm
Article no. PU1
154.005.00.1 1
Product material Stainless steel
Article no. PU1
154.300.00.1 1
1-11
85
145
59
30
10ø40ø43
91
91
49
Product material Stainless steel
Article no. PU1
154.301.00.1 1
Product material Stainless steel
Article no. PU1
154.302.00.1 1
Product material Stainless steel
Article no. PU1
154.303.00.1 1
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2011 75
Design grating - classic, natural
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Design grating - puristic, square
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Design grating - puristic, circle
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Uniflex shower channel, floor
Application
• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For installing in the room centre
Characteristics
• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• Outlet bend ø 50 mm
Product Details
Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Protection housing; Adhesive; Fastening material; Excludes ready to fit set
Ordering Information
Product material Stainless steel
Article no. PU1
154.304.00.1 1
Product material Stainless steel
Article no. PU1
154.305.00.1 1
Product material Stainless steel
Article no. PU1
154.306.00.1 1
Drainage capacity 0.8 l/s
Depth of water seal 50 mm
Article no. lcm
l1cm
l2cm
l3cm
PU1 PU4
154.100.00.1 70 33 13,7 80 1 20
154.101.00.1 80 38 18,7 90 1 20
154.102.00.1 90 43 23,7 100 1 20
154.103.00.1 100 48 28,7 110 1 20
154.130.00.1 110 53 33,7 120 1
154.131.00.1 120 58 38,7 130 1
1514
6
l
l3
l2l1
50
19314
10-15
12-26
112-17652
76 Product and Installation Guide Washroom & Bathroom 2011
Product GuideTraps
Uniflex shower channel, wall
Application
• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For wall mounting
Characteristics
• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• Outlet bend ø 50 mm
Product Details
Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Margin insulation tape for decoupling solid-borne sound; Protection housing; Adhesive; Fastening material; Excludes ready to fit set
Ordering Information
Ready-to-fit set shower channel, creative set
Application
• For use with bespoke Uniflex shower channel ready-to-fit set
Characteristics
• Production and care instructions for the manufacture of individual design covers
Additional NoteExtraction tool; 10 damping caps (8.5 mm); 10 damping caps (14.5 mm)
Ordering Information
Ready-to-fit set shower channel, brushed stainless steel
Application
• For use with Uniflex shower channel
Characteristics
• Brushed stainless steel
Additional NoteDesign cover; 10 damping caps; Extraction tool
Ordering Information
Ready-to-fit set shower channel, bespoke
Application
• For use with Uniflex shower channel
Characteristics
• Lid can be covered with ceramic plates• Requires 154.299.00.1
Additional NoteDesign cover; Extraction tool
Ordering Information
Drainage capacity 0.8 l/s
Depth of water seal 50 mm
Article no. lcm
l1cm
l2cm
l3cm
PU1 PU4
154.105.00.1 70 33 13,7 80 1 20
154.106.00.1 80 38 18,7 90 1 20
154.107.00.1 90 43 23,7 100 1 20
154.108.00.1 100 48 28,7 110 1 20
154.135.00.1 110 53 33,7 120 1
154.136.00.1 120 58 38,7 130 1
Article no. PU1
154.299.00.1 1
135
193
6
3
14
6l
l3
l214l1
50
10-15
12-26
52112-176
Article no. Lcm
PU1 PU4
154.350.00.1 70 1 40
154.351.00.1 80 1 40
154.352.00.1 90 1 26
154.353.00.1 100 1 26
154.354.00.1 110 1
154.355.00.1 120 1
Article no. Lcm
PU1 PU4
154.360.00.1 70 1
154.361.00.1 80 1
154.362.00.1 90 1
154.363.00.1 100 1
154.356.00.1 110 1
154.357.00.1 120 1 20
5
L
Product GuideFill and flush valves for ceramic cisterns
Product and Installation Guide Washroom & Bathroom 2011 77
Fill and flush valves for ceramic cisterns
Impuls380 side filling valve
Application
• For filling cisterns• For use with grey water (rainwater), providing a filter system is used• For use with sea water (brass parts must be dezincification-resistant)• For use with clean drinking water• Can be installed in an exposed cistern• Not suitable for use with water with an elevated chlorine content
(swimming pools, etc.)• Not suitable for use with cleaning agents, disinfectants and colouring
agents put into the cistern (contact Geberit if in doubt)
Characteristics
• The filling height can be set by turning the spindle• The valve opens after the water level drops by 20 mm
Product Details
Additional NoteAdaptor; Cone screw fitting; Spacer
Ordering Information
Impuls360 bottom filling valve
Application
• For water supply connection at the bottom• For water supply connection 1/2"
Characteristics
• Height-adjustable
Product Details
Additional NoteSeal; Nut
Ordering Information
Impuls260 dual flush valve with "half moon" buttons for ceramic cisterns
Application
• For installation in ceramic cisterns
Characteristics
• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover
Product Details
Additional NoteDual flush unit; Lid attachment; Dual flush actuator; Fastening material; Seals
Excluded: Fill valve
Ordering Information
Fill and flush valves for ceramic cisterns
Flow pressure range 0.1–10 bar
Flow rate at 0.5 bar 0.07 l/s
Flow rate at 3 bar 0.19 l/s
Line noise at 3 bar 12 dB(A)
Line noise at 5 bar 18 dB(A)
Pressure shock increase at 6 bar +1 bar
Max. temperature during storage 40 °C
Operating temperature water max. 25 °C
Article no. PU1 PU2 PU4
240.700.00.1 1 10 200
212
3
243
112
61
Operating temperature water max. 25 °C
Flow pressure range 0.1–10 bar
Flow rate at 3 bar 0.16 l/s
Line noise at 3 bar 17 dB(A)
Article no. PU1 PU2 PU4
281.206.00.1 1 25 600
Actuation force 18 N
Max. temperature during storage 40 °C
Operating temperature water max. 25 °C
Flush volume large range 6 / 9 l
Flush volume small range 3–4 l
Article no. PU1 PU2 PU4
261.157.00.1 1 36 432
WL
CL
CL
WL
235 - 385
146 - 296
25
92
G
41.5 9 - 15
96
71
185-28
38-45
325-41
min. 9 mmmax. 35 mm
8
125
78 Product and Installation Guide Washroom & Bathroom 2011
Product GuideFill and flush valves for ceramic cisterns
Impuls280 dual flush valve with round chrome and blue square flush buttons for ceramic cisterns
Application
• For installation in ceramic cisterns
Characteristics
• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover
Product Details
Additional NoteDual flush unit; Dual flush actuator with rosette; Fastening material; Rosette ø 50 mm
Ordering Information
Flush volume large range 6 / 9 l
Flush volume small range 3–4 l
Actuation force 18 N
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Max. temperature during storage 40 °C
Article no. Colour PU1 PU2 PU4
282.350.KD.1 Gloss chrome / blue 1 18 108
312-45 293-431
min. 08
max. 15
38-45 12-45
17-27
min. 09
max. 2
16
8
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 79
Geberit AquaClean
Geberit AquaClean 8000plus wall mounted WC
Application
• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern
Characteristics
• Warm water wash with adjustable temperature• Warm air dryer with adjustable temperature• Washdown WC with surface-coated ceramic appliance• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Pulsating spray• Adjustable spray intensity• Automatic pre-rinsing of spray nozzle with fresh water and post-
rinsing with nozzle cleaner for Geberit AquaClean 8000plus• Integrated storage water heater tank with ON/OFF and economy
setting• 4 programmable user profiles• Water supply connection on the left side• Mains fed water connection required• Functions and settings adjustable via remote control
Product Details
Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Cover plate for remote control compartment; Active carbon filter; Nozzle cleaner for Geberit AquaClean 8000plus; Water supply connection set for UP300 / UP320 concealed cistern; Dryer fan with housing; Acoustic insulation set; Fastening material; Spray shield
Ordering Information
Using the supplied standard water connection set, all concealed cisterns (except for UP200 and UP720) can be connected with the prepared conduit pipe.The UP200 concealed cistern additionally requires the reinforced braided hose with T-piece (art. no. 241.819.00.1) to be ordered.The UP720 concealed cistern additionally requires the connection hose 242.413.00.1 to be ordered.
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean
42
18−2043
21−255−9
415−455
25
135
615
215
290
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 1000 W
Power consumption standby / with heating switched on 1 / 9 W
Protection degree IP x4
Protection class I
Length of mains connection cable 70 cm
Air volume flow rate odour extraction unit 10 m3/h
Air volume flow rate dryer 12 m3/h
Flow rate, anal shower 2.1–5.5 l/min
Flow rate, Lady shower 1.4–3 l/min
Dryer temperature factory setting 45 °C
Dryer temperature range 20–45 °C
Water temperature factory setting 37 °C
Water temperature range 10–39 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 2.0 l
Net weight 32 kg
Gross weight 37 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1 PU4
180.101.11.1 White alpine 1 4
80 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 8000 wall mounted WC
Application
• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern
Characteristics
• Warm water wash with adjustable temperature• Washdown WC with surface-coated ceramic appliance• Infra-red user detection• WC seat with soft closing lid• Integrated storage water heater tank with ON/OFF and economy
setting• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Adjustable spray intensity• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required
Product Details
Additional NoteWater supply connection set for UP300 / UP320 concealed cistern; Acoustic insulation set; Fastening material; Spray shield
Ordering Information
Using the supplied standard water connection set, all concealed cisterns (except for UP200 and UP720) can be connected with the prepared conduit pipe.The UP200 concealed cistern additionally requires the reinforced braided hose with T-piece (art. no. 241.819.00.1) to be ordered.The UP720 concealed cistern additionally requires the connection hose 242.413.00.1 to be ordered.
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 1000 W
Power consumption standby / with heating switched on 1 / 9 W
Protection degree IP x4
Protection class I
Length of mains connection cable 70 cm
Flow rate, anal shower 2.1–5.5 l/min
Water temperature factory setting 37 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 2.0 l
Net weight 27.5 kg
Gross weight 34 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1 PU4
146.181.11.1 White alpine 1 6
42
18−2043
21−25
205
5−9
415−455
25
135
615
215
290
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 81
Geberit AquaClean 5000plus New
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Pulsating spray• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF and economy
setting• Warm air dryer with adjustable temperature• Mains connection cable can be cut to length• Mains power connection at rear with hidden pipe-laying option to the
left or right• Functions and settings adjustable via remote control• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side
Product Details
Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield
Ordering Information
For installation with UP200 concealed cistern, order:• Article no. 240.634.00.1 for UP200 concealed cistern H82• Article no. 240.635.00.1 for UP200 concealed cistern H98For installation with the UP300 and UP320 concealed cistern, order:• Article no. 249.801.00.1For installation with the UP720 concealed cistern, order:• Article no. 242.413.00.1 and 249.801.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
185
485
35
3030 22
55
155
35
15
R3/825
11
29
13-165
507
295
195
385
225
54-8
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 850 W
Power consumption standby / with heating switched on 0.9 / 6.7 W
Protection degree IP x4
Protection class I
Length of mains connection cable 2 m
Air volume flow rate odour extraction unit 4.4 m3/h
Air volume flow rate dryer 9.1 m3/h
Flow rate, anal shower 1.7–3 l/min
Flow rate, Lady shower 0.6–2 l/min
Dryer temperature factory setting 45 °C
Dryer temperature range 20–45 °C
Water temperature factory setting 37 °C
Water temperature range 10–39 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 1.65 l
Net weight 6.3 kg
Gross weight 9.2 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1 PU4
146.114.11.1 White alpine 1 12
82 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 5000 New
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash with adjustable temperature• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Spray arm with nozzle for anal area, can be extended• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF setting• Mains power connection at rear with hidden pipe-laying option to the
left or right• Mains connection cable can be cut to length• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required
Product Details
Additional NoteIncludes: Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield
Ordering Information
For installation with UP200 concealed cistern, order:• Article no. 240.634.00.1 for UP200 concealed cistern H82• Article no. 240.635.00.1 for UP200 concealed cistern H98For installation with the UP300 and UP320 concealed cistern, order:• Article no. 249.801.00.1For installation with the UP720 concealed cistern, order:• Article no. 242.413.00.1 and 249.801.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 850 W
Power consumption standby / with heating switched on 0.9 / 6.7 W
Protection degree IP x4
Protection class I
Length of mains connection cable 2 m
Air volume flow rate odour extraction unit 4.4 m3/h
Flow rate, anal shower 1.7–3 l/min
Water temperature factory setting 37 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 1.65 l
Net weight 6.1 kg
Gross weight 9 kg
Maximum load WC seat / WC lid 150 kg
185
485
35
3030
22
55
155
35
15
R3/825
11
29
13-165
507
295
195
385
225
54-8
Article no. Colour PU1 PU4
146.122.11.1 White alpine 1 12
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 83
Geberit AquaClean 4000 New
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash• WC seat with soft closing lid• Spray intensity can be set to 5 different levels• Mains power connection at rear with hidden pipe-laying option to the
left or right• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Integrated storage water heater tank with ON/OFF setting• Water supply connection on the left side
Product Details
Ordering Information
For installation with UP200 concealed cistern, order:• Article no. 240.634.00.1 for UP200 concealed cistern H82• Article no. 240.635.00.1 for UP200 concealed cistern H98For installation with the UP300 and UP320 concealed cistern, order:• Article no. 249.801.00.1For installation with the UP720 concealed cistern, order:• Article no. 242.413.00.1 and 249.801.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 800 W
Power consumption standby / with heating switched on 0.9 / 5.8 W
Protection degree IP x4
Protection class I
Length of mains connection cable 2 m
Flow rate, anal shower 0.9–1.6 l/min
Water temperature factory setting 37 °C
Operating temperature 10–40 °C
Storage temperature -10 – +60 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 5
Flow pressure range 0.5–10 bar
Storage water heater capacity 0.9 l
Net weight 4.1 kg
Gross weight 7.5 kg
Maximum load WC seat / WC lid 150 kg
40
15
R1/2 155
3030
17
3
55
4
55
145
15
13-165
10
2855-9
225
5
505
14
26
Article no. Colour PU1 PU4
146.132.11.1 White alpine 1 12
84 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean Design Panel for 8000plus & 8000 New
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit UP300 and UP320 concealed cistern• For use with Geberit Twinline concealed cistern 12 cm (UP130) (model
110.8xx from year of manufacture 1997, and from year of manufacture 1988 with built-in conversion set for dual flush; Geberit actuator plates Highline, Twinline, 200F)
• For use on fully tiled surface
Characteristics
• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel• High pressure laminate
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Geberit AquaClean Design Panel for 8000plus & 8000, glass New
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit UP300 and UP320 concealed cistern• For use with Geberit Twinline concealed cistern 12 cm (UP130) (model
110.8xx from year of manufacture 1997, and from year of manufacture 1988 with built-in conversion set for dual flush; Geberit actuator plates Highline, Twinline, 200F)
• For use on fully tiled surface
Characteristics
• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
115.323.11.1 White 1
107
10
162
475
65-70
48
58
106
95
18
15
Article no. Colour PU1 PU4
115.325.SG.1 Black 1 10
115.325.SF.1 White 1 10
107
10
162
475
65–70
48
58
106
95
18
2
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 85
Geberit AquaClean Design Panel for 4000, 5000 & 5000plus New
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit UP300 and UP320 concealed cistern• For use with Geberit Twinline concealed cistern 12 cm (UP130) (model
110.8xx from year of manufacture 1997, and from year of manufacture 1988 with built-in conversion set for dual flush; Geberit actuator plates Highline, Twinline, 200F)
• For use on fully tiled surface
Characteristics
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel• High pressure laminate
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Geberit AquaClean Design Panel for 4000, 5000 & 5000plus, glass New
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit UP300 and UP320 concealed cistern• For use with Geberit Twinline concealed cistern 12 cm (UP130) (model
110.8xx from year of manufacture 1997, and from year of manufacture 1988 with built-in conversion set for dual flush; Geberit actuator plates Highline, Twinline, 200F)
• For use on fully tiled surface
Characteristics
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
115.322.11.1 White 1
107
162
38
59
95
495
15
Article no. Colour PU1 PU4
115.324.SG.1 Black 1 10
115.324.SF.1 White 1 10
107
162
38
59
95
495
2
86 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 8000plus & 8000 braided hose for installation with UP200 cistern
Application
• For UP200 concealed cistern with top/front actuation• For connecting Geberit AquaClean
Characteristics
• Special production to meet the standard BS 6920
Ordering Information
Geberit water supply connection Geberit Sigma concealed cistern 8 cm (UP720), for Geberit AquaClean
Application
• For use with Geberit Sigma concealed cistern 8 cm (UP720), front actuation
• For connecting Geberit AquaClean
Ordering Information
Geberit AquaClean 5000 & 5000plus standard connection set New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP300 / UP320/ UP720/ Duofix WC frame 1.12 m New
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For use with Geberit Duofix, GIS, Kombifix and Sanbloc elements• For concealed cisterns with pre-mounted conduit pipe for the water
supply connection• For connection to Geberit Kappa concealed cistern 15 cm (UP200);
use separate water supply connection set• For connecting Geberit AquaClean complete solutions to Geberit
Duofix Special elements, barrier-free• For connecting Geberit AquaClean complete solutions to Geberit
Duofix Special elements, height-adjustable
Additional NoteAngle stop valve R 1/2"; 2 metal-reinforced hoses R 3/8"; Y-branch; Connection material
Ordering Information
Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP200 / Duofix WC frame 0.82 cm New
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For UP200 concealed cistern with top/front actuation• For use with installation elements with construction height 82 cm
Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean connection sets
Article no. PU1
241.819.00.1 1
Article no. PU1
242.413.00.1 1
Article no. PU1 PU2
242.185.00.1 1 5
Article no. PU1
249.801.00.1 1
Article no. PU1
240.634.00.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 87
Geberit AquaClean 4000, 5000 & 5000plus water supply connection set for UP200 / Duofix WC frame 0.98 cm New
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For UP200 concealed cistern with top/front actuation• For installation elements with construction height 98 cm
Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material
Ordering Information
Geberit AquaClean 8000plus nozzle cleaner
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Characteristics
• For approx. 750 uses (400 ml)• Dermatologically tested
Ordering Information
Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 1 pcs New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 2 pcs New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
240.635.00.1 1
Geberit AquaClean consumables
Article no. PU1 PU2
242.545.00.1 1 12
Article no. PU1 PU4
240.625.00.1 1 144
Article no. PU1 PU4
240.626.00.1 1 144
88 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean cleaning agent New
Application
• For cleaning Geberit AquaClean devices
Characteristics
• Content 500 ml• Can be used immediately and undiluted• Environmentally friendly
Ordering Information
Geberit AquaClean cleaning agent with cloth New
Application
• For cleaning Geberit AquaClean devices
Additional NoteGeberit AquaClean cleaning agent; Cleaning cloth
Ordering Information
Geberit AquaClean 8000plus active carbon filter
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 5000plus active carbon filter set New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000plus and 8000plus battery set for remote control New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 5000plus
Additional NoteSet of 3
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1 PU2
242.546.00.1 1 10
Article no. PU1 PU2
242.547.00.1 1 10
Article no. PU1 PU2
250.022.00.1 1 100
Article no. PU1 PU2
240.116.00.1 1 30
Article no. PU1
147.008.00.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 89
Geberit AquaClean 8000plus set shower and dryer nozzle
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus remote control wall holder
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus remote control
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Product Details
Ordering Information
Geberit AquaClean 8000 shower nozzle
Application
• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 seat and lid
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 lid
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean spare parts
Article no. PU1 PU2
242.394.00.1 1 10
Article no. PU1
250.032.00.1 1
Radio frequency 2.4 GHz
Article no. PU1
250.043.00.1 1
Article no. PU1
250.071.00.1 1
Article no. Colour PU1 PU2
250.034.11.1 White alpine 1 5
Article no. Colour PU1
250.067.11.1 White alpine 1
90 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 8000plus & 8000 seat
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 casing
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 damper, white
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 damper white for seat - right New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 cover - right New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 O-ring for shower arm New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
250.066.11.1 White alpine 1
Article no. Colour PU1 PU4
250.029.11.1 White alpine 1 6
Article no. PU1 PU2
250.069.00.1 1 10
Article no. PU1
250.068.00.1 1
Article no. PU1
250.026.00.1 1
Article no. PU1
240.665.00.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 91
Geberit AquaClean 8000plus & 8000 screw for casing New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000anti-slip strip set New
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 maintenance flap
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 acoustic insulation set
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Additional NoteSound insulation mat; 2 sleeves
Ordering Information
Geberit AquaClean 5000plus remote control New
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000plus dryer flap New
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
250.079.11.1 1
Article no. PU1
250.037.11.1 1
Article no. Colour PU1
250.030.11.1 White alpine 1
Article no. PU1
250.027.00.1 1
Article no. PU1
242.169.11.1 1
Article no. PU1 PU2
242.184.11.1 1 20
92 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 5000plus wall mounted holder for remote control New
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus WC seat lid New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus WC seat New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus filter New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus adaptor plate New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Characteristics
• Dowel with clamping range 13–16 mm and 15–18 mm
Additional NoteConnection material; Allen key; 4 dowels
Ordering Information
Geberit AquaClean 5000 & 5000plus spray nozzle New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
240.057.11.1 1
Article no. PU1
242.181.11.1 1
Article no. PU1
242.179.11.1 1
242.180.11.1 1
Article no. PU1 PU2
242.187.00.1 1 10
Article no. PU1
240.495.00.1 1
Article no. PU1
240.226.11.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 93
Geberit AquaClean 5000 & 5000plus cover filter compartment New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus cover for electrical connection New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus hinge set New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus compensation pad set raised New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Additional NoteSet of 4
Ordering Information
Geberit AquaClean 5000 & 5000plus compensation pad set New
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Additional NoteSet of 4
Ordering Information
Geberit AquaClean 5000 & 5000plus pad set for WC lid New
Application
• For use with Geberit AquaClean 5000
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1 PU2
242.182.11.1 1 12
Article no. PU1 PU2
242.183.11.1 1 15
Article no. PU1
242.186.11.1 1
Article no. PU1
241.517.CG.1 1
Article no. PU1
241.516.CG.1 1
Article no. PU1 PU2
242.286.CG.1 1 50
94 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
Geberit AquaClean 4000 WC seat
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 WC seat lid
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 filter New
Application
• For use with Balena 4000• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 securing clip to WC lid New
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 pad set for WC lid New
Application
• For use with Balena 4000• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 pin set for WC seat/lid New
Application
• For use with Geberit AquaClean 4000
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
242.171.11.1 1
242.170.11.1 1
Article no. PU1 PU2
242.172.11.1 1 7
Article no. PU1
147.235.00.1 1
Article no. PU1
242.178.11.1 1
Article no. PU1
147.231.00.1 1
Article no. PU1
242.175.00.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2011 95
Geberit AquaClean 4000 O-ringset for spray arm New
Application
• For use with Geberit AquaClean 4000• For use with Balena 4000
Ordering Information
Geberit AquaClean 4000 compensation pad set raised New
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 compensation pad set New
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 spray nozzle with 3 holes New
Application
• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 spray nozzle with 5 holes New
Application
• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000, 5000 & 5000plus fastening set New
Ordering Information
Geberit AquaClean waterstream cover
Application
• For use with Geberit AquaClean 4000• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus• For use with Geberit AquaClean 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
242.176.00.1 1
Article no. PU1
242.174.00.1 1
Article no. PU1
242.173.00.1 1
Article no. PU1 PU2
242.377.00.1 1 100
Article no. PU1 PU2
242.376.00.1 1 100
Article no. PU1
849.825.00.1 1
Article no. Colour PU1
813.224.15.0 Glass clearly 1
96 Product and Installation Guide Washroom & Bathroom 2011
Product GuideGeberit AquaClean
SparesDuofix WC frames Spares
Product and Installation Guide Washroom & Bathroom 2011 97
Buy spares direct on 01789 842127
SparesDuofix WC frames
111.383.00.5 Duofix WC frame 1.12 m with UP320 for Sigma flush plates - PreWall111.384.00.5 Duofix WC frame 1.12 m with UP320 for Sigma flush plates
Ordering Information
Duofix WC frames
Pos. Article no. Description
1 241.869.00.1 Mounting accessories
2 241.824.00.1 Inner cover
3 241.826.00.1 Protection housing
4 362.771.00.1 Seal for flush pipe
5 362.796.92.1 Protection cover for flush pipe
6 240.189.00.1 Threaded rod (pr)
7 152.426.46.1 WC Connection Set
7.1 152.426.11.1 WC Connection Set
7.2 217.713.46.1 Chrome Caps & Washers Gloss
7.3 119.668.00.1 Flush pipe seal
7.4 152.424.00.1 Rubber collar
8 366.061.16.1 90 mm HDPE 90 Degree bend
8.1 387.282.00.1 Collar for outlet bend
9 366.820.92.1 Protection cover
10 367.928.16.1 90/110 mm Adaptor
11 242.012.00.1 Complete pipe bracket
11.1 242.017.00.1 Pipe bracket clip
12 242.010.00.1 Conduit pipe for shower toilet water supply
13 111.892.00.1 Hexagonal self tapping screws
14 240.269.00.1Water supply connection R 1/2" with integrated angle stop valve
14.1 240.298.00.1 Spindle for isolation valve
14.2 240.347.00.1 Hand wheel
14.3 241.857.00.1 Nut for isolation valve
15 241.982.00.1 Stainless steel connection hose
15.1 240.922.00.1 EPDM O Ring 7.5 x 1.5 mm / 19 x 2 mm
16 240.923.00.1 Connection clip for fill valve
17 240.705.00.1 Side fill valve for Duofix
17.1 240.771.00.1 Diaphragm for side fill valve
18 241.858.00.1 Complete flush valve with basket
19 240.622.00.1 Complete flush valve
19.1 241.167.00.1 Clip set for flush valves
19.2 816.418.00.1 Flush valve seal
20 241.859.00.1 Basket for flush valve
20.1 241.868.00.1 Seal for basket
21 241.829.00.1 Cradle assembly for push rods
816.418
10
4
2
1
3
5
98.1
12
11.1
14.3
14.114.2
7.2
15
15.1
2113
1617
17.1
19.2
18
19
19.1
20
20.113
14
11
87.1
7
7.3
6
98 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares Duofix WC frames
Buy spares direct on 01789 842127
111.383.00.1 Duofix WC frame 1.12 m with UP300 cistern - PreWall 111.384.00.1 Duofix WC frame 1.12 m with UP300 cistern
Ordering Information
Pos. Article no. Description
1 240.930.00.1 Inner cover
2 240.931.00.1 Protection housing
3 240.929.00.1 Cradle assembly for push rods
4 240.705.00.1 Side fill valve for Duofix
4.1 240.771.00.1 Diaphragm for side fill valve
5 240.923.00.1 Connection clip for fill valve
6 241.982.00.1 Stainless steel connection hose
6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
7 240.177.00.1 Servicing (stop) valve
7.1 240.925.00.1 Spindle for isolation valve
7.2 240.623.00.1 Nut for isolation valve
8 240.622.00.1 Complete flush valve
8.1 241.167.00.1 Clip set for flush valves
8.2 240.927.00.1 Part flush rod for valve
8.3 816.418.00.1 Flush valve seal
8.4 240.695.00.1 Holder for flush valve
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 362.771.00.1 Seal for flush pipe
11 362.796.92.1 Protection cover for flush pipe
12 111.892.00.1 Hexagonal self tapping screws
13 240.972.00.1 Complete pipe bracket
13.1 240.417.00.1 Pipe bracket clip
14 240.189.00.1 Threaded rod (pr)
15 366.061.16.1 90mm HDPE 90 degree bend
16 367.928.16.1 90/110mm Adaptor
17 152.426.46.1 WC connection set
17.1 217.713.46.1 Chrome caps & washers
17.2 152.434.06.1 WC flush pipe connector & collar
17.3 119.668.00.1 Flush pipe seal
17.4 152.424.00.1 Rubber collar
17.5 152.425.46.1 Pan connector
SparesDuofix WC frames Spares
Product and Installation Guide Washroom & Bathroom 2011 99
Buy spares direct on 01789 842127
111.242.00.1 Duofix WC frame 0.82 m with UP200 cistern - PreWall 111.292.00.1 Duofix WC frame 0.98 m with UP200 cistern - PreWall
Ordering Information
Pos. Article no. Description
1 240.206.00.1 Inner cover
2 240.172.00.1 Protection housing
3 240.533.00.1 Cradle assembly for push rods
4 240.269.00.1 Servicing (stop) valve complete
4.1 240.347.00.1 Knob for isolation valve
4.2 240.298.00.1 Spindle for isolation valve
4.3 240.623.00.1 Nut for isolation valve
5 240.705.00.1 Side fill valve
5.1 240.771.00.1 Diaphragm for side fill valve
6 240.846.00.1 Stainless steel connection hose
6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
7 240.637.00.1 Complete flush valve
8 240.638.00.1 Flush valve
8.1 816.418.00.1 Flush valve seal
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 362.771.00.1 Seal for flush pipe
11 362.796.92.1 Protection cover for flush pipe
12 240.189.00.1 Threaded rod (pr)
13 240.972.00.1 Complete pipe bracket
13.1 240.417.00.1 Pipe bracket clip
14 152.426.46.1 WC connection set
14.1 217.713.46.1 Chrome caps & washers
14.2 119.668.00.1 Flush pipe seal
14.3 152.424.00.1 Rubber collar
15 366.061.16.1 90 mm HDPE 90 degree bend
15.1 387.282.00.1 90 mm seal
16 366.820.92.1 Protection cover
17 367.928.16.1 90/110 mm Adaptor
18 111.892.00.1 Hexagonal self tapping screws
55.1
4
4.34.1 4.2
1
2
3
11
12
12
17
9
8
7
8.1
9.1
15
16
15.1
18
18
13
13.1
10
6
6.1
14
14.3
14.2
14.1
100 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares Duofix WC frames
Buy spares direct on 01789 842127
111.253.00.1 WC frame 0.88 m - PreWall 111.254.00.1 WC frame 0.82 m - PreWall
Ordering Information
Pos. Article no. Description
1 240.206.00.1 Inner cover
2 240.172.00.1 Protection housing
3 240.079.00.1 Cradle assembly for push rods
4 240.705.00.1 Side fill valve for Duofix
4.1 240.771.00.1 Diaphragm for side fill valve
5 241.016.00.1 Stainless steel connection hose
5.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
6 240.177.00.1 Servicing (stop) valve for Duofix II
6.1 240.925.00.1 Spindle for isolation valve
6.2 240.623.00.1 Nut for isolation valve
7 240.122.00.1 Complete flush valve for 0.82/0.88 cistern
7.1 241.167.00.1 Clip set for flush valves
7.2 816.418.00.1 Flush valve seal
8 240.500.00.1 Basket for flush valve
8.1 240.282.00.1 Seal for basket
9 362.771.00.1 Seal for flush pipe
10 362.796.92.1 Protection cover for flush pipe
11 111.892.00.1 Hexagonal self tapping screws
12 240.972.00.1 Complete pipe bracket
13 240.189.00.1 Threaded rods (pair)
14 366.061.16.1 90 mm HDPE 90 degree bend
15 367.928.16.1 90/110mm Adaptor
16 152.426.46.1 WC connection set
16.1 217.713.46.1 Chrome caps & washers
16.2 152.434.06.1 WC flush pipe connector & collar
16.3 119.668.00.1 Flush pipe seal
16.4 152.424.00.1 Rubber collar
16.5 152.425.46.1 Pan connector
SparesConcealed cisterns Spares
Product and Installation Guide Washroom & Bathroom 2011 101
Buy spares direct on 01789 842127
Concealed cisterns
109.309.00.5 Concealed dual flush cistern UP320
Ordering Information
Concealed cisterns
Pos. Article no. Description
1 240.923.00.1 Connection clip for fill valve
2 240.705.00.1 Side fill valve for Duofix
2.1 240.771.00.1 Diaphragm for side fill valve
3 241.858.00.1 Complete flush valve with basket
4 240.622.00.1 Complete flush valve
4.1 241.167.00.1 Clip set for flush valves
4.2 816.418.00.1 Flush valve seal
5 241.859.00.1 Basket for flush valve
5.1 241.868.00.1 Seal for basket
6 241.826.00.1 Protection housing
7 241.824.00.1 Inner cover
8 241.829.00.1 Cradle assembly for push rods
9 241.378.00.1 Concealed flush pipe fixing set
10 119.652.16.1 Concealed flush pipe
10.1 362.771.00.1 Seal for flush pipe ø 45 mm
10.2 362.796.92.1 Protection cover for flush pipe
11 892.975.00.1 O Ring seal
12 889.711.00.1 Fixing slider
13 465.027.00.1 Wall brackets and screws (pair)
14 241.982.00.1 Stainless steel connection hose
15 240.269.00.1Water supply connection R 1/2“ with integrated angle stop valve
15.1 240.347.00.1 Hand wheel
15.2 240.298.00.1 Spindle for isolation valve
15.3 241.857.00.1 Nut for isolation valve
816.418
11
10.210.1
15
15.115.2
15.3
1 2
8
10
7
2.1
4.2
3
4
4.1
5
5.1
14
6
9
13
12
13
102 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares Concealed cisterns
Buy spares direct on 01789 842127
109.309.00.1 Concealed dual flush cistern UP300
Ordering Information
Pos. Article no. Description
1 240.930.00.1 Inner cover
2 240.931.00.1 Protection housing
3 240.929.00.1 Cradle assembly for push rods
4 240.705.00.1 Side fill valve for Duofix
4.1 240.771.00.1 Diaphragm for side fill valve
5 240.923.00.1 Connection clip for fill valve
6 241.982.00.1 Stainless steel connection hose
7 240.177.00.1 Servicing (stop) valve
7.1 240.925.00.1 Spindle for isolation valve
7.2 240.623.00.1 Nut for isolation valve
8 240.622.00.1 Complete flush valve
8.1 241.167.00.1 Clip set for flush valves
8.2 240.927.00.1 Part flush rod for valve
8.3 816.418.00.1 Flush valve seal
8.4 240.695.00.1 Holder for flush valve
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 892.975.00.1 O Ring seal
11 119.652.16.1 Concealed flush pipe
11.1 362.771.00.1 Seal for flush pipe
11.2 362.796.92.1 Protection cover for flush pipe
12 241.378.00.1 Concealed flush pipe fixing set
13 465.027.00.1 Wall brackets and screws (pair)
14 152.434.06.1 WC flush pipe connector and collar
14.1 119.668.00.1 Flush pipe seal
SparesConcealed cisterns Spares
Product and Installation Guide Washroom & Bathroom 2011 103
Buy spares direct on 01789 842127
109.200.00.1 Concealed dual flush cistern UP200
Ordering Information
123.137.11.1 Concealed single flush cistern AP123
Ordering Information
Pos. Article no. Description
1 240.206.00.1 Inner cover
2 240.172.00.1 Protection housing
3 240.533.00.1 Cradle assembly for push rods
4 240.269.00.1 Servicing (stop) valve complete
4.1 240.347.00.1 Knob for isolation valve
4.2 240.298.00.1 Spindle for isolation valve
4.3 240.623.00.1 Nut for isolation valve
5 240.705.00.1 Side fill valve
5.1 240.771.00.1 Diaphragm for side fill valve
6 240.846.00.1 Stainless steel connection hose
6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
7 240.637.00.1 Complete flush valve
8 240.638.00.1 Flush valve
8.1 241.167.00.1 Clip set for flush valve
8.2 816.418.00.1 Flush valve seal
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 362.771.00.1 Seal for flush pipe
11 362.796.92.1 Protection cover for flush pipe
12 241.378.00.1 Concealed flush pipe fixing set
13 152.434.06.1 WC flush pipe connector and collar
13.1 119.668.00.1 Flush pipe seal
Pos. Article no. Description
1 890.240.11.1 Cover
2 240.700.00.1 Side fill valve
2.1 240.771.00.1 Diaphragm for side fill valve
3 240.573.00.1 Pneumatic actuation unit single flush
4 240.576.00.1 Flush valve
4.1 816.418.00.1 Flush valve seal
5 256.000.00.1 Air hose 3.5m
6 118.006.11.1 Flush bend
7 119.668.00.1 Flush seal for pan
Not Illustrated
294.802.00.1 Wall brackets
240.139.00.1 Seal kit
104 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares Concealed cisterns
Buy spares direct on 01789 842127
109.720.00.1 Concealed dual flush cistern for low height furniture109.721.00.1 Concealed single flush cistern low height furniture
Ordering Information
109.722.00.1 Mechanical operated concealed dual flush cistern for low height furniture - plastic button109.723.00.1 Mechanical operated concealed dual flush cistern for low height furniture - metal button
Ordering Information
Pos. Article no. Description
1 281.206.00.1 Bottom fill valve
1.1 241.813.00.1 Seal set for bottom fill valve
2 241.415.00.1 Flush valve
2.1 816.418.00.1 Flush valve seal
3 240.574.00.1 Pneumatic actuation unit*
4 241.414.00.1 Cover plate/lid
5 241.413.21.1 Dual flush button*
6 240.575.00.1 Double air hose*
7 119.705.93.1 Flush bend
8 119.668.00.1 Flush seal for pan
*Dual flush only.
For single flush:
240.573.00.1 Pneumatic actuation unit
256.000.00.1 Air hose 3.5m
Not Illustrated
240.139.00.1 Seal kit
Pos. Article no. Description
1 281.206.00.1 Bottom fill valve
1.1 241.813.00.1 Seal set for bottom fill valve
2 241.415.00.1 Flush Valve
2.1 816.418.00.1 Flush valve seal
3 241.976.00.1 Mechanical actuation unit
4 241.414.00.1 Cover plate/lid
5 119.705.93.1 Flush bend
5.1 119.668.00.1 Flush seal for pan
6 241.978.21.1
Dual flush button, plastic
241.978.21.Z Dual flush button, galvanized
7 241.979.00.1
Counter nut
Not Illustrated
240.139.00.1 Seal kit
WL
CL
4
2
1
1.1
2.1
3
6
7
5 5.1
SparesWC flush plates Spares
Product and Installation Guide Washroom & Bathroom 2011 105
Buy spares direct on 01789 842127
WC flush plates
115.778.XX.1 Sigma20 dual flush plate for UP320115.788.XX.1 Sigma50 dual flush plate for UP320
Ordering Information
115.758.XX.1 Sigma10 single flush plate for UP320
Ordering Information
WC flush plates
Pos. Article no. Description
1 241.876.00.1 Flush plate fixing frame for tool-free installation
2 241.874.00.1Push rods and distance rods for tool-free installation
3 240.938.00.1 Extension set
4 241.295.00.1 Spring
Note: Samba, Bolero, Twist compatible after 1st April 2008
Pos. Article no. Description
1 241.876.00.1 Flush plate fixing frame
2 241.874.00.1Push rods and distance rods for tool-free installation
3 240.938.00.1 Extension set
Note: Rumba, Mambo and Tango compatible after 1st April 2008
2
2
2
2
1
3
4 4 4 4
2
2 1
2
3
106 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares WC flush plates
Buy spares direct on 01789 842127
115.770.XX.1 Samba dual flush plate115.777.XX.1 Bolero dual flush plate115.780.XX.1 Twist dual flush plate115.782.XX.1 Twist dual flush plate anti vandal
Ordering Information
115.750.XX.1 Rumba single flush plate115.751.XX.1 Mambo single flush plate115.760.XX.1 Tango single flush plate
Ordering Information
Pos. Article no. Description
1 813.514.00.1 Spring
2 240.935.00.1 Flush plate fixing frame
2.1 240.934.00.1 Push rod locking piece
3 240.936.00.1 Push rods (pair)
4 240.173.00.1 Distance rods (pair)
5 240.930.00.1 Inner cover
Note: For post May 2008 installation please use Sigma spares list
Pos. Article no. Description
1 813.514.00.1 Spring
2 240.935.00.1 Flush plate fixing frame
2.1 240.933.00.1 Push rod locking piece
3 240.936.00.1 Push rods (pair)
4 240.173.00.1 Distance rods (pair)
5 240.930.00.1 Inner cover
Note: For post May 2008 installation please use Sigma spares list
SparesWC flush plates Spares
Product and Installation Guide Washroom & Bathroom 2011 107
Buy spares direct on 01789 842127
115.228.XX.1 Kappa20 dual flush plate115.260.XX.1 Kappa50 dual flush plate
Ordering Information
115.666.XX.1 Artline dual flush plate
Ordering Information
Pos. Article no. Description
1 241.295.00.1 Spring
2 240.639.00.1 Push rods and distance rods (pair)
3 240.646.00.1 Flush plate fixing frame
4 240.206.00.1 Inner cover
5 240.938.00.1 Extension set (order separately)
Pos. Article no. Description
1 813.514.00.1 Spring
2 240.207.00.1 Push rods (pair)
3 240.646.00.1 Flush plate fixing frame
4 240.173.00.1 Distance rods (pair)
5 240.206.00.1 Inner cover
Note: For post 2006 Artline installation please use the Kappa spares list
4
2
2
32
11
5
108 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares
Buy spares direct on 01789 842127
111.623.00.1 Duofix urinal frame111.622.00.1 Duofix urinal frame with pipe interruptor
Ordering Information
116.001.00.1 Urinal installation set universal116.003.00.1 Urinal installation set with flush pipe
Ordering Information
Duofix urinal frames
Pos. Article no. Description
1 242.195.00.1 Hose R8 for inlet UR-element
2 242.039.00.1 Crossbar for water supply 32 mm
3 152.489.16.1 Inlet connector & collar
4 242.045.00.1 Fixation rods complete
4.1 242.046.00.1 Plastic nut for urinal fastening
5 240.027.46.1 Chrome caps & washers
6 242.210.00.1 Cross bar metal for urinal element for outlet
7 152.950.11.1 Urinal trap
7 152.983.00.1 Urinal trap
8 240.306.00.1 Protection plug
9 240.315.00.1 Urinal outlet bend complete
9.1 152.693.00.1 Rubber collar reducer 63x50
10 242.516.00.1 Geberit straight connector, PVC d50
11 111.892.00.1 Hexagonal self tapping screws
12see 116.001.00.1 Urinal installation set universal
Pos. Article no. Description
1 242.130.00.1 Connection nipple urinal straight
2 242.131.00.1 Connection nipple urinal bent
3 241.934.00.1 Stop valve with throttle, complete
3.1 241.933.00.1 Regulating screw
4 241.930.00.1 Protection cover with protection cover lid
5 241.947.00.1 Insulation protection with connection terminal
6 242.156.00.1 Lip seal flushing pipe
9
12
10
9.1
6
2
5
4.1 4
8
3
11
11 1
7
4
12
5
6
3.1
3
SparesFill and flush valves for ceramic cisterns Spares
Product and Installation Guide Washroom & Bathroom 2011 109
Buy spares direct on 01789 842127
111.674.00.1 Duofix urinal frame111.667.00.1 Duofix urinal frame with pipe interruptor
Ordering Information
Fill and flush valves for ceramic cisterns
240.700.00.1 Impuls380 side fill valve240.705.00.1 Impuls380 side fill valve
Ordering Information
Pos. Article no. Description
1 240.534.00.1 Protection housing cover
2 115.832.00.1 Protection housing
3 240.517.00.1 Water part
3.1 241.060.00.1 Filter case & isolation valve
3.2 240.520.00.1 Filter
3.3 240.871.00.1 Flat seal
4 240.518.00.1 Dummy cover with seal
5 241.061.00.1 Complete nipple
6 240.522.00.1 Electrical isolation cover
7 242.516.00.1 Geberit straight connector, PVC d50
7.1 152.693.00.1 Rubber collar reducer 63x50
8 240.306.00.1 Protection plug
9 152.983.00.1 Urinal trap
10 240.027.46.1 Chrome caps & washers
11 242.045.00.1 Fixation rods complete
11.1 242.046.00.1 Plastic nut for urinal fastening
12 152.489.16.1 Inlet connector & collar
13 242.041.00.1 Crossbar for water supply di 32mm
14 242.047.00.1 Crossbar for drainage
15 111.892.00.1 Hexagonal self tapping screws
16 242.005.00.1 Inlet hose for urinal frame
17 115.801.00.1 Universal urinal housing
Fill and flush valves for ceramic cisterns
Pos. Article no. Description
1 240.771.00.1 Diaphragm assembly
2 261.358.00.1 Stainless steel connection hose 3/8"
3 240.846.00.1 Stainless steel connection hose
110 Product and Installation Guide Washroom & Bathroom 2011
SparesSpares Fill and flush valves for ceramic cisterns
Buy spares direct on 01789 842127
281.206.00.1 Impuls360 bottom fill valve
Ordering Information
Impuls280 dual flush valve blue square design
Ordering Information
Pos. Article no. Description
1 241.813.00.1 Seal set
Pos. Article no. Description
1 241.800.KD.1 Flush button
2 241.801.00.1 Basket
2.1 240.278.00.1 Overflow pipe
3 816.418.00.1 Flush valve seal
4 261.630.00.1 Connection set
4.1 241.350.00.1 Connection washer
120 Product and Installation Guide Washroom & Bathroom 2011
Installation GuideWaste and drainage connection Urinal
Numerical index
Product and Installation Guide Washroom & Bathroom 2011 121
Article no. Page
107.35.05B 65
107.35.14B 65
107.35.24B 65
107.35.34B 65
109.200.00.1 10
109.211.00.1 11
109.309.00.5 9
109.720.00.1 12
109.772.00.1 10
111.242.00.1 5
111.292.00.1 5
111.352.00.5 8
111.383.00.5 3
111.384.00.5 4
111.399.00.5 7
111.493.00.1 28
111.494.00.1 27
111.495.00.1 27
111.543.00.1 43
111.544.00.1 42
111.545.00.1 42
111.622.00.1 44
111.623.00.1 45
111.706.00.1 6
111.729.00.1 6
111.731.00.1 72
111.743.00.1 72
111.790.00.1 8
111.830.00.1 57
111.835.00.1 59
111.843.00.1 59
111.844.00.1 59
111.847.00.1 58
111.859.00.1 46
111.867.00.1 58
111.868.00.1 58
111.869.00.1 58
111.871.00.1 57
111.872.00.1 57
111.873.00.1 57
111.874.00.1 57
111.878.00.1 57
111.887.00.1 59
111.889.00.1 60
111.892.00.1 97
111.892.00.1 98
111.892.00.1 99
111.892.00.1 100
111.892.00.1 108
111.892.00.1 109
115.075.21.1 23
115.075.21.Z 24
115.114.11.1 21
115.114.21.1 21
115.200.11.1 46
115.210.CD.1 47
115.210.GT.1 47
115.214.CD.1 47
115.214.GT.1 47
115.228.10.1 19
115.228.11.1 19
115.228.21.1 19
115.228.46.1 19
115.228.CG.1 19
115.228.DK.1 19
115.228.DT.1 19
115.228.DW.1 19
115.228.EP.1 19
115.228.FB.1 19
115.228.FR.1 19
115.228.GM.1 19
115.228.KB.1 19
115.240.KH.1 19
115.240.KJ.1 19
115.240.KK.1 19
115.240.KL.1 19
115.240.KM.1 19
115.240.KN.1 19
115.258.00.1 19
115.260.11.1 19
115.260.21.1 19
115.260.46.1 19
115.260.HC.1 19
115.322.11.1 85
115.323.11.1 84
115.324.SF.1 85
115.324.SG.1 85
115.325.SF.1 84
115.325.SG.1 84
115.612.00.1 17
115.666.11.1 18
115.666.21.1 18
115.666.46.1 18
115.680.11.1 19
115.680.21.1 19
115.723.21.1 30
115.725.21.1 31
115.733.21.1 29
115.738.21.1 29
115.739.21.1 30
115.740.21.1 28
115.750.11.1 18
115.750.21.1 18
115.750.46.1 18
115.750.KB.1 18
115.751.00.1 18
115.758.KH.1 14
115.758.KJ.1 14
115.758.KK.1 14
115.758.KL.1 14
115.758.KM.1 14
115.758.KN.1 14
Article no. Page
115.760.11.1 18
115.760.21.1 18
115.760.45.1 18
115.760.46.1 18
115.760.DT.1 18
115.760.GM.1 18
115.760.HC.1 18
115.760.KA.1 18
115.765.46.1 20
115.770.10.1 17
115.770.11.1 17
115.770.21.1 17
115.770.46.1 17
115.770.CG.1 17
115.770.DK.1 17
115.770.DT.1 17
115.770.DW.1 17
115.770.EP.1 17
115.770.FB.1 17
115.770.FR.1 17
115.770.GM.1 17
115.770.KB.1 17
115.777.10.1 17
115.777.11.1 17
115.777.21.1 17
115.777.46.1 17
115.777.CG.1 17
115.777.DK.1 17
115.777.DT.1 17
115.777.DW.1 17
115.777.EP.1 17
115.777.FB.1 17
115.777.FR.1 17
115.777.GM.1 17
115.777.KB.1 17
115.778.KH.1 14
115.778.KJ.1 14
115.778.KK.1 14
115.778.KL.1 14
115.778.KM.1 14
115.778.KN.1 14
115.785.00.1 15
115.785.11.1 16
115.785.DW.1 16
115.785.EP.1 16
115.785.GH.1 15
115.785.SC.1 16
115.785.SD.1 16
115.785.SE.1 16
115.788.00.1 14
115.788.11.1 15
115.788.DW.1 15
115.788.EP.1 15
115.788.GH.1 15
115.788.SC.1 14
115.788.SD.1 14
Article no. Page
115.788.SE.1 14
115.792.GH.1 16
115.798.00.1 20
115.801.00.1 109
115.831.00.1 60
115.832.00.1 109
115.855.00.1 25
115.857.00.1 26
115.857.21.1 26
115.860.00.1 60
115.890.00.1 25
115.891.00.1 26
115.918.00.1 24
115.939.00.1 24
115.941.11.1 23
115.941.KA.1 23
115.942.11.1 23
115.942.KA.1 23
115.943.21.1 22
115.947.00.1 21
115.947.21.1 21
115.949.21.1 22
115.999.21.1 23
116.001.00.1 45
116.003.00.1 46
116.011.11.1 51
116.011.21.1 51
116.011.46.1 51
116.012.11.1 52
116.012.21.1 52
116.012.46.1 52
116.013.FW.1 54
116.014.11.1 55
116.014.21.1 55
116.014.46.1 55
116.015.KH.1 47
116.015.KJ.1 47
116.015.KK.1 47
116.015.KL.1 47
116.015.KM.1 47
116.015.KN.1 47
116.016.00.1 49
116.016.11.1 49
116.016.DW.1 49
116.016.EP.1 49
116.016.SC.1 49
116.016.SD.1 49
116.016.SE.1 49
116.021.11.1 51
116.021.21.1 51
116.021.46.1 51
116.022.11.1 53
116.022.21.1 53
116.022.46.1 53
116.023.FW.1 54
116.024.11.1 56
Article no. Page
122 Product and Installation Guide Washroom & Bathroom 2011
Numerical index
116.024.21.1 56
116.024.46.1 56
116.025.KH.1 48
116.025.KJ.1 48
116.025.KK.1 48
116.025.KL.1 48
116.025.KM.1 48
116.025.KN.1 48
116.026.GH.1 50
116.031.11.1 52
116.031.21.1 52
116.031.46.1 52
116.032.11.1 53
116.032.21.1 53
116.032.46.1 53
116.033.FW.1 55
116.034.11.1 56
116.034.21.1 56
116.034.46.1 56
116.035.KH.1 48
116.035.KJ.1 48
116.035.KK.1 48
116.035.KL.1 48
116.035.KM.1 48
116.035.KN.1 48
116.036.GH.1 50
116.107.21.1 38
116.108.21.1 39
116.117.21.1 39
116.118.21.1 40
116.127.21.1 38
116.128.21.1 40
116.135.21.1 32
116.136.21.1 35
116.145.21.1 34
116.146.21.1 37
116.155.21.1 33
116.156.21.1 36
116.235.21.1 32
116.236.21.1 35
116.245.21.1 34
116.246.21.1 37
116.255.21.1 33
116.256.21.1 36
118.006.11.1 103
119.652.16.1 101
119.652.16.1 102
119.668.00.1 97
119.668.00.1 98
119.668.00.1 99
119.668.00.1 100
119.668.00.1 102
119.668.00.1 103
119.668.00.1 103
119.668.00.1 104
119.668.00.1 104
Article no. Page
119.705.93.1 104
119.705.93.1 104
123.137.11.1 11
131.002.SI.1 13
131.002.SJ.1 13
131.002.SK.1 13
131.021.SI.1 12
131.021.SJ.1 12
131.021.SK.1 12
131.023.SI.1 13
131.023.SJ.1 13
131.074.00.1 61
131.082.16.1 67
131.083.16.1 66
131.085.11.1 67
131.088.29.1 66
131.104.00.1 60
131.105.00.1 61
131.108.11.1 67
146.114.11.1 81
146.122.11.1 82
146.132.11.1 83
146.181.11.1 80
147.008.00.1 88
147.231.00.1 94
147.235.00.1 94
150.247.00.1 71
150.535.21.1 68
150.536.21.1 68
150.679.21.1 71
150.688.21.1 71
150.712.21.1 69
150.713.21.1 69
150.770.11.1 70
150.770.21.1 70
150.771.11.1 70
150.771.21.1 70
150.772.11.1 71
150.772.21.1 71
151.039.21.1 67
152.170.16.1 66
152.424.00.1 97
152.424.00.1 98
152.424.00.1 99
152.424.00.1 100
152.425.46.1 98
152.425.46.1 100
152.426.11.1 97
152.426.46.1 97
152.426.46.1 98
152.426.46.1 99
152.426.46.1 100
152.434.06.1 98
152.434.06.1 100
152.434.06.1 102
152.434.06.1 103
Article no. Page
152.438.46.1 65
152.489.16.1 108
152.489.16.1 109
152.693.00.1 108
152.693.00.1 109
152.950.11.1 108
152.983.00.1 108
152.983.00.1 109
154.005.00.1 74
154.100.00.1 75
154.101.00.1 75
154.102.00.1 75
154.103.00.1 75
154.105.00.1 76
154.106.00.1 76
154.107.00.1 76
154.108.00.1 76
154.130.00.1 75
154.131.00.1 75
154.135.00.1 76
154.136.00.1 76
154.299.00.1 76
154.300.00.1 74
154.301.00.1 74
154.302.00.1 74
154.303.00.1 74
154.304.00.1 75
154.305.00.1 75
154.306.00.1 75
154.330.00.1 73
154.330.11.1 73
154.330.21.1 73
154.330.FW.1 73
154.350.00.1 76
154.351.00.1 76
154.352.00.1 76
154.353.00.1 76
154.354.00.1 76
154.355.00.1 76
154.356.00.1 76
154.357.00.1 76
154.360.00.1 76
154.361.00.1 76
154.362.00.1 76
154.363.00.1 76
156.050.00.1 9
156.051.00.1 28
180.101.11.1 79
217.713.46.1 97
217.713.46.1 98
217.713.46.1 99
217.713.46.1 100
240.027.46.1 108
240.027.46.1 109
240.057.11.1 92
240.079.00.1 100
Article no. Page
240.116.00.1 88
240.122.00.1 100
240.139.00.1 103
240.139.00.1 104
240.139.00.1 104
240.172.00.1 99
240.172.00.1 100
240.172.00.1 103
240.173.00.1 106
240.173.00.1 106
240.173.00.1 107
240.177.00.1 98
240.177.00.1 100
240.177.00.1 102
240.189.00.1 97
240.189.00.1 98
240.189.00.1 99
240.189.00.1 100
240.206.00.1 99
240.206.00.1 100
240.206.00.1 103
240.206.00.1 107
240.206.00.1 107
240.207.00.1 107
240.226.11.1 92
240.269.00.1 97
240.269.00.1 99
240.269.00.1 101
240.269.00.1 103
240.278.00.1 110
240.282.00.1 98
240.282.00.1 99
240.282.00.1 100
240.282.00.1 102
240.282.00.1 103
240.298.00.1 97
240.298.00.1 99
240.298.00.1 101
240.298.00.1 103
240.306.00.1 108
240.306.00.1 109
240.315.00.1 108
240.347.00.1 97
240.347.00.1 99
240.347.00.1 101
240.347.00.1 103
240.417.00.1 98
240.417.00.1 99
240.495.00.1 92
240.500.00.1 100
240.517.00.1 109
240.518.00.1 109
240.520.00.1 109
240.522.00.1 109
240.533.00.1 99
240.533.00.1 103
Article no. Page
Numerical index
Product and Installation Guide Washroom & Bathroom 2011 123
240.534.00.1 109
240.573.00.1 103
240.573.00.1 104
240.574.00.1 104
240.575.00.1 104
240.576.00.1 103
240.623.00.1 99
240.622.00.1 97
240.622.00.1 98
240.622.00.1 101
240.622.00.1 102
240.623.00.1 98
240.623.00.1 100
240.623.00.1 102
240.623.00.1 103
240.625.00.1 87
240.626.00.1 87
240.634.00.1 81
240.634.00.1 82
240.634.00.1 83
240.634.00.1 86
240.635.00.1 81
240.635.00.1 82
240.635.00.1 83
240.635.00.1 87
240.637.00.1 99
240.637.00.1 103
240.638.00.1 99
240.638.00.1 103
240.639.00.1 107
240.646.00.1 107
240.646.00.1 107
240.665.00.1 90
240.695.00.1 98
240.695.00.1 102
240.700.00.1 77
240.700.00.1 103
240.705.00.1 97
240.705.00.1 98
240.705.00.1 99
240.705.00.1 100
240.705.00.1 101
240.705.00.1 102
240.705.00.1 103
240.771.00.1 97
240.771.00.1 98
240.771.00.1 99
240.771.00.1 100
240.771.00.1 101
240.771.00.1 102
240.771.00.1 103
240.771.00.1 103
240.771.00.1 109
240.846.00.1 99
240.846.00.1 103
240.846.00.1 109
Article no. Page
240.871.00.1 109
240.922.00.1 97
240.922.00.1 98
240.922.00.1 99
240.922.00.1 100
240.922.00.1 103
240.923.00.1 97
240.923.00.1 98
240.923.00.1 101
240.923.00.1 102
240.925.00.1 98
240.925.00.1 100
240.925.00.1 102
240.927.00.1 98
240.927.00.1 102
240.928.00.1 98
240.928.00.1 99
240.928.00.1 102
240.928.00.1 103
240.929.00.1 98
240.929.00.1 102
240.930.00.1 98
240.930.00.1 102
240.930.00.1 106
240.930.00.1 106
240.931.00.1 98
240.931.00.1 102
240.933.00.1 106
240.934.00.1 106
240.935.00.1 106
240.935.00.1 106
240.936.00.1 106
240.936.00.1 106
240.938.00.1 20
240.938.00.1 105
240.938.00.1 105
240.938.00.1 107
240.972.00.1 98
240.972.00.1 99
240.972.00.1 100
241.016.00.1 100
241.060.00.1 109
241.061.00.1 109
241.144.00.1 22
241.167.00.1 97
241.167.00.1 98
241.167.00.1 100
241.167.00.1 101
241.167.00.1 102
241.198.00.1 21
241.198.21.1 21
241.199.11.1 21
241.199.21.1 21
241.282.21.1 22
241.295.00.1 105
241.295.00.1 107
Article no. Page
241.350.00.1 110
241.378.00.1 101
241.378.00.1 102
241.378.00.1 103
241.413.21.1 104
241.414.00.1 104
241.414.00.1 104
241.415.00.1 104
241.415.00.1 104
241.516.CG.1 93
241.517.CG.1 93
241.631.00.1 41
241.672.00.1 41
241.692.00.1 31
241.800.KD.1 110
241.801.00.1 110
241.813.00.1 104
241.813.00.1 104
241.813.00.1 110
241.819.00.1 79
241.819.00.1 80
241.819.00.1 86
241.824.00.1 97
241.824.00.1 101
241.826.00.1 97
241.826.00.1 101
241.829.00.1 97
241.829.00.1 101
241.857.00.1 97
241.857.00.1 101
241.858.00.1 97
241.858.00.1 101
241.859.00.1 97
241.859.00.1 101
241.868.00.1 97
241.868.00.1 101
241.869.00.1 97
241.874.00.1 105
241.874.00.1 105
241.876.00.1 105
241.876.00.1 105
241.894.00.1 60
241.930.00.1 108
241.933.00.1 108
241.934.00.1 108
241.947.00.1 108
241.976.00.1 104
241.978.21.1 104
241.978.21.Z 104
241.979.00.1 104
241.982.00.1 97
241.982.00.1 98
241.982.00.1 101
241.982.00.1 102
242.005.00.1 109
242.010.00.1 97
Article no. Page
242.012.00.1 97
242.017.00.1 97
242.039.00.1 108
242.041.00.1 109
242.045.00.1 108
242.045.00.1 109
242.046.00.1 108
242.046.00.1 109
242.047.00.1 109
242.130.00.1 108
242.131.00.1 108
242.156.00.1 108
242.169.11.1 91
242.170.11.1 94
242.171.11.1 94
242.172.11.1 94
242.173.00.1 95
242.174.00.1 95
242.175.00.1 94
242.176.00.1 95
242.178.11.1 94
242.179.11.1 92
242.180.11.1 92
242.181.11.1 92
242.182.11.1 93
242.183.11.1 93
242.184.11.1 91
242.185.00.1 86
242.186.11.1 93
242.187.00.1 92
242.195.00.1 108
242.210.00.1 108
242.286.CG.1 93
242.310.00.1 60
242.376.00.1 95
242.377.00.1 95
242.394.00.1 89
242.413.00.1 86
242.516.00.1 108
242.516.00.1 109
242.544.GH.1 16
242.545.00.1 87
242.546.00.1 88
242.547.00.1 88
249.801.00.1 81
249.801.00.1 82
249.801.00.1 83
249.801.00.1 86
250.022.00.1 88
250.026.00.1 90
250.027.00.1 91
250.029.11.1 90
250.030.11.1 91
250.032.00.1 89
250.034.11.1 89
250.037.11.1 91
Article no. Page
124 Product and Installation Guide Washroom & Bathroom 2011
Numerical index
250.043.00.1 89
250.066.11.1 90
250.067.11.1 89
250.068.00.1 90
250.069.00.1 90
250.071.00.1 89
250.079.11.1 91
256.000.00.1 103
256.000.00.1 104
261.157.00.1 77
261.358.00.1 109
261.630.00.1 110
281.206.00.1 77
281.206.00.1 104
281.206.00.1 104
282.350.KD.1 78
294.802.00.1 103
362.771.00.1 97
362.771.00.1 98
362.771.00.1 99
362.771.00.1 100
362.771.00.1 101
362.771.00.1 102
362.771.00.1 103
362.796.92.1 97
362.796.92.1 98
362.796.92.1 99
362.796.92.1 100
362.796.92.1 101
362.796.92.1 102
362.796.92.1 103
366.061.16.1 63
366.061.16.1 97
366.061.16.1 98
366.061.16.1 99
366.061.16.1 100
366.820.92.1 97
366.820.92.1 99
366.887.16.1 62
367.792.16.1 63
367.887.16.1 62
367.928.16.1 64
367.928.16.1 97
367.928.16.1 98
367.928.16.1 99
367.928.16.1 100
367.945.16.1 64
387.282.00.1 97
387.282.00.1 99
388.350.29.1 62
461.030.00.1 59
465.027.00.1 101
465.027.00.1 102
616.030.00.1 41
813.224.15.0 95
813.514.00.1 106
Article no. Page
813.514.00.1 106
813.514.00.1 107
816.418.00.1 97
816.418.00.1 98
816.418.00.1 99
816.418.00.1 100
816.418.00.1 101
816.418.00.1 102
816.418.00.1 103
816.418.00.1 103
816.418.00.1 104
816.418.00.1 104
816.418.00.1 110
849.825.00.1 95
889.711.00.1 101
890.240.11.1 103
892.975.00.1 101
892.975.00.1 102
F107.35.09B 65
F107.35.18B 65
F107.35.29B 65
Article no. Page