Upload
trancong
View
310
Download
9
Embed Size (px)
Citation preview
Paper Machinery Corporation
PMC 1003 Cup & Container Forming Machine
Forming innovation since 1951.
The flagship PMC 1003 forming machine delivers unprecedented speed for greater efficiency and reduced production costs.
Large volume producers choose the PMC 1003 to form a wide variety of tapered paperboard or plastic cups and containers
for global markets including food and beverage, snacks and frozen desserts.
Advanced performance technology improves uptime, increases production rates and provides operator friendly features.
Produces containers at speeds up to 330 CPM.
Forms cups and containers ranging from 3 oz. to 32 oz. depending upon configuration.
PMC 1003 Cup & Container Forming Machine
PMC 1003 Machine Specifications
Paper Machinery Corporation8900 West Bradley Road Milwaukee, WI 53224 USA
414-354-8050 | www.papermc.com
MaterialsCups and containers are formed from preprinted die-cut sidewall blanks or roll stock, and web-fed bottom stock.
Approximate Machine WeightBase Machine 20,000 lbs. approx.
Electrical Cabinet 1,500 lbs. approx.
21,500 lbs. approx.Size RangeProduces 3 oz. (89 ml) to 32 oz. (950 ml), two piece paper or plastic cups.
MAIN POWER ANDCONTROL CABINET
INCLINE CONVEYOR WITH8’ HORIZONTAL LOADING CONVEYOR
THREE PHASETRANSFORMER
HEIGHT 37" (0.9M)
ELECTRICAL CABINETHEIGHT 74” [1.9M]
BOTTOMHEAT
STATION
ROLLERINCURL
STATIONCUP BLOW
OFF
BOTTOMFINISH
STATION
RIMMING FINISH CURL STATION
RIMMING PRE-CURL STATION
BOTTOM DISK PRE-HEAT STATION
BOTTOM MAKER STATIONOPERATOR STATION
TAMPER LUBE STATION
BOTTOMSTOCKROLL
OPERATOR STATION
1.5" TO 13.5"TELESCOPE
FITTING
BOTTOMSTOCK SPLICE
WIREWAY WITH QUICK DISCONNECTS (OPTIONAL)
RIMMING SECONDARY CURL STATIONBOTTOM STOCK SCRAP
60.0” DIA.MAX ROLL DIA.
CUP DIVERTER
(OPTIONAL)
20"[0.5M]34"
[0.9M]
20"[0.5M]
310" [7.9M]
38"[1.0M]
170" [4.3M]
95" [2.6M]30" [.8M]
98" [2.5M] 42" [1.1M]
78"[2.0M]
107"[2.7M]
MACHINE ENCLOSURE
SUPER STRUCTURE CONTAININGWIRING AND UTILITY PIPING
88" [2.2M] 20" [.5M]
Service Requirements
*Volume flow rates listed are flow rates at standardconditions, 1.0 atmosphere and 68º F.
Exact service requirements are dependent upon customer specifications.
Electrical CompressedAir*
MachineVacuum*
Add Vacuum*for Blank Feeder
Water
100 kVA 3PH @
50 or 60 HZ
135 ft3/min@
90 lb/inch2
or0.064 m3/sec
@6.3 kg/cm2
35 ft3/min@
18 inches Hgor
0.017 m3/sec@
0.62 kg/cm2
50 ft3/min@
18 inches Hg or
0.024 m3/sec @
0.62 kg/cm2
0.5 gal/min@
20 lb/inch2
or1.9 liter/min
@1.4 kg/cm2
10-20-2014