1
Setting the Standard in Aviation Fueling™ Aviation Cartridges & Housings ©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice. www.pecofacet.com MPI Series Inside-to-Out Flow Flushing Pleated Paper Filter Cartridges The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator vessel during flushing on new systems or when there’s been repairs to the existing equipment. The elements are less expensive than coalescer ele- ments and have more filtration media for better solids holding capacity. Benefits, features and materials of construction are similar to our MP Series filter elements, except designed to flow inside to outside same as coalescer cartridges. MODEL NUMBER MICRON RATING NOMINAL LENGTH OUTSIDE DIAMETER INSIDE DIAMETER MOUNTING STYLE in. mm. in. mm. in. mm. MPI-622-2SB 2 23 580 6 152 3 1 2 88 SCREW BASE MPI-628-2SB 2 28 3 4 730 6 152 3 1 2 88 SCREW BASE MPI-633-5SB 5 34 860 6 152 3 1 2 88 SCREW BASE MPI-638-5SB 5 39 990 6 152 3 1 2 88 SCREW BASE MPI-643-0.5SB 0.5 45 1140 6 152 3 1 2 88 SCREW BASE MPI-643-5 5 43 1 4 1100 6 152 3 1 2 88 ROD MOUNT MPI-643-5SB 5 45 1140 6 152 3 1 2 88 SCREW BASE MPI-56-0.5SB 0.5 57 1450 6 152 3 1 2 88 SCREW BASE MPI-656-1 1 56 1 4 1430 6 152 3 1 2 88 ROD MOUNT MPI-656-2SB 2 57 1450 6 152 3 1 2 88 SCREW BASE MPI-656-5 5 56 1 4 1430 6 152 3 1 2 88 ROD MOUNT MPI-656-5SB 5 57 1450 6 152 3 1 2 88 SCREW BASE NOTE: Other lengths & micron rating available. BENEFITS Less expensive than coalescer cartridges More solids holding capacity than coalescer cartridges Less weight resulting in lower freight costs STANDARD DESIGN FEATURES Recommended maximum operating temperature: 240°F Maximum differential pressure: 75 psi Flow direction: Inside to out pH range from 5 to 9 Single-piece construction “Rod Mount” or “Screw base” options available MATERIALS All metal components coated to protect against corrosion Gaskets are Buna-N—other materials available on request Metal outer shell and core DATA

PECOFacet MPI Series Inside-to-Out Flow Flushing Pleated ... · The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator

  • Upload
    vannhi

  • View
    221

  • Download
    2

Embed Size (px)

Citation preview

Page 1: PECOFacet MPI Series Inside-to-Out Flow Flushing Pleated ... · The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator

Setting the Standard in Aviation Fueling™

Aviation Cartridges & Housings©2009 PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.

www.pecofacet.com

MPI Series Inside-to-Out FlowFlushing Pleated Paper Filter Cartridges

The Facet Flushing Filter elements are designed to be used in place of coalescer elements in a coalescer separator vessel during flushing on new systems or when there’s been repairs to the existing equipment. The elements are less expensive than coalescer ele-ments and have more filtration media for better solids holding capacity. Benefits, features and materials of construction are similar to our MP Series filter elements, except designed to flow inside to outside same as coalescer cartridges.

MODEL NUMBERMICRON RATING

NOMINAL LENGTH OUTSIDE DIAMETER INSIDE DIAMETERMOUNTING STYLE

in. mm. in. mm. in. mm.

MPI-622-2SB 2 23 580 6 152 31∕2 88 SCREW BASE MPI-628-2SB 2 283∕4 730 6 152 31∕2 88 SCREW BASE MPI-633-5SB 5 34 860 6 152 31∕2 88 SCREW BASE MPI-638-5SB 5 39 990 6 152 31∕2 88 SCREW BASE MPI-643-0.5SB 0.5 45 1140 6 152 31∕2 88 SCREW BASE MPI-643-5 5 431∕4 1100 6 152 31∕2 88 ROD MOUNT MPI-643-5SB 5 45 1140 6 152 31∕2 88 SCREW BASE MPI-56-0.5SB 0.5 57 1450 6 152 31∕2 88 SCREW BASE MPI-656-1 1 561∕4 1430 6 152 31∕2 88 ROD MOUNT MPI-656-2SB 2 57 1450 6 152 31∕2 88 SCREW BASE MPI-656-5 5 561∕4 1430 6 152 31∕2 88 ROD MOUNT MPI-656-5SB 5 57 1450 6 152 31∕2 88 SCREW BASENOTE: Other lengths & micron rating available.

BENEFITS

• Less expensive than coalescer cartridges • More solids holding capacity than coalescer cartridges • Less weight resulting in lower freight costs

STANDARD DESIGN FEATURES• Recommended maximum operating temperature: 240°F • Maximum differential pressure: 75 psi • Flow direction: Inside to out • pH range from 5 to 9• Single-piece construction • “Rod Mount” or “Screw base” options available

MATERIALS• All metal components coated to protect against corrosion • Gaskets are Buna-N—other materials available on request • Metal outer shell and core

DATA