2
PleatGard TM Series PS PLEATED DRY GAS CARTRIDGES for use in Series 30F dry gas housings Designed for installation in PECOFacet Series 30F inline gas filter housings, PleatGard Series PS cartridges remove dust, scale, rust, sand and other particulates from air and gas streams. Durable, highly efficient, synthetic filter media and corrosion resistant hardware ensure that PleatGard cartridges stand up to the toughest application needs. The basket style configuration provides for easy installation and removal while isolating contaminants and preventing spillage into the housing during removal of cartridges. A chevron gasket provides a positive seal that gets tighter as the cartridges get dirtier. This prevents seal breaches at high differential pressure. MEDIA ............................................ Pleated Polyester OUTER SUPPORT ....................... Plated Steel END CAPS ..................................... Plated Steel SEAL.................................................. Buna-N MATERIALS Media Top Cap w/ Chevron Gasket Outer Support Closed Bottom Cap OIL & GAS

PleatGardTM Series PS - PECOFacet · Designed for installation in PECOFacet Series 30F inline gas filter housings, PleatGard Series PS cartridges remove dust, scale, rust, sand and

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

PleatGardTM Series PSPLEATED DRY GAS CARTRIDGES

for use in Series 30F dry gas housings

Designed for installation in PECOFacet Series 30F inline gas filter housings, PleatGard Series PS cartridges remove dust, scale, rust, sand and other particulates from air and gas streams. Durable, highly efficient, synthetic filter media and corrosion resistant hardware ensure that PleatGard cartridges stand up to the toughest application needs. The basket style configuration provides for easy installation and removal while isolating contaminants and preventing spillage into the housing during removal of cartridges. A chevron gasket provides a positive seal that gets tighter as the cartridges get dirtier. This prevents seal breaches at high differential pressure.

MEDIA ............................................ Pleated PolyesterOUTER SUPPORT ....................... Plated SteelEND CAPS ..................................... Plated SteelSEAL .................................................. Buna-N

MATERIALS

Media

Top Cap w/ Chevron Gasket

Outer Support

Closed Bottom Cap

OIL & GAS

PS 2

MICRON251020

MISC.

559

SIZE (OD x ID x L) 559 = 5.625” x 4” x 9”5519 = 5.625” x 4” x 19”819 = 7.8” x 6.5” x 19”

NOMENCLATURE

MICRON RATING ................. 2, 5, 10, 20EFFICIENCY ............................. Removes 99.98% of contaminants at rated micron & larger

PERFORMANCE

MAX. TEMPERATURE .........................................................................................240OFMAX. PRESSURE .....................................................................................................35 psidMax. Pressure may be limited by housing manufacturer’s design

RECOMMENDED CHANGE-OUT PRESSURE ....................................... 12–15 psidFLOW DIRECTION ................................................................................................ inside-to-outside

OPERATING DATA

©2017 PECOFacet

PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.

OG-PS-TD-04 (PFMW 201703)

For inquires email: [email protected] names are trademarks of PECOFacet. ® indicates a PECOFacet trademark registered in the USA and various other countries.

Refer to the website for the most current literature editions.

pecofacet.com