RAC Coalescer Elements - RAC Coalescer Elements API Approved Design Features For the Separation of Water

  • View
    0

  • Download
    0

Embed Size (px)

Transcript

  • RAC Coalescer Elements API Approved

    Design Features For the Separation of Water and Solids from Aviation Fuels according to API 1581 3rd Edition.

    API filter water separators are fitted with coalescer elements and separators which are required in jet fuel supply and delivery systems. These include fixed refueling installations, pipe lines and tank farms as well as aircraft refueling vehicles, hydrant dispensers and other mobile fueling equipment. Racor API coalescers and separators are also commonly used in other hydrocarbon fuel streams where high efficiency filtration and water separation are required.

    Technical Details - Tested and approved to API 1581,

    3rd Edition, Group II, Class B & C Specifications

    - Nominal Filtration: 1 micron

    - Changeout Differential Pressure: 15 psid

    - Minimum Burst Pressure: 75 psid

    R A

    C A

    P I

    R A C - 6 56 - 3 - TB

    Racor

    API/IP Approved

    Coalescer

    Element O.D.

    Element Nominal Length

    Element Approval Status

    Endcap Configuration

    Element Nomenclature

    - Recommended Service Time: 24 months1

    - Recommended Storage Time: 36 months1

    - Operating Temperature: 176oF (max)

    - Flow Direction: inside to outside

    - Outside Diameter: 6 inch

    - Metal parts in epoxy coated steel

    - Seals in NBR (Buna-N)

    - Screw based endcaps made out of Polyamide

    - Labeling according to API (date of manufacture, ID Number, etc.) on the endcap

    1 Manufacturer recommendation

    2 Original packaging, 68oF and max. 50% humidity after date of shipment out of manufacturers stock.

    Coalescer Wrap

    Pleated Paper

    Filtration

    Cotton Outer Sock

    Support Tube

  • Bulletin RCR01-7674/US 07/2006 © All rights reserved.

    29/16 in. 31/2 in.

    Endcap Type: TB

    L

    6 in.

    2 in.

    Endcap Type: 50mm

    6 in.

    L

    1 in.

    1/2-13 UNC

    4 9/64”

    L

    6 in.

    Endcap Type: 65mm

    L

    6 in.

    Standard Endcap

    Endcap Configuration

    Nominal Length in Inches 50MM 65MM

    Standard Unless Specified TB

    11 RAC-611-3

    14 RAC-614-3 RAC-614-3-TB

    22 RAC-622-3-65MM RAC-622-3 RAC-622-3-TB

    28 RAC-628-3 RAC-628-3-TB

    33 RAC-633-3-50MM RAC-633-3-65MM RAC-633-3 RAC-633-3-TB

    38 RAC-638-3-65MM RAC-638-3 RAC-638-3-TB

    43 RAC-643-3 RAC-643-3-TB

    56 RAC-656-3 RAC-656-3-TB

    Convertion Table

    ft/lbs inch/lbs kg/m Nm

    5 60 0.70 7

    15 180 2.07 20

    20 240 2.80 27

    25 300 3.50 34

    30 360 4.15 40

    Torque Settings

    15 ft/lbs30 ft/lbs25 ft/lbs