PALFINGER Service Crane - Drive Products 4016 PALFINGER Service Crane One piece hexogonal boom sections with single weld seam Winch integrated two block damage prevention system Protective

The service crane solution

The PSC 3216 was designed especially for crane body vehicles, allowing for maximum utilization of body compartment space

and rear-bumper access to the bed. PALFINGER service cranes offer superior lift-to-weight ratios, while utilizing the full 16ft of

hydraulic reach with it‘s self centering hexagonal booms. North American manufacturing and components including SAE hoses

with JIC fittings, standard wireless remote control in conjunction with an industry leading 24-month warranty on all major com-

ponents guarantee years of worry free usage.

PSC 3216 PALFINGER Service Crane

One piece hexogonal boom sections with single weld seam

Winch integrated two block damage prevention system

Protective coverElectric (power pack) /Hydraulic (truck pump and PTO)

Stowing hook deisgned to keep load block from contacting the bottom of the boom

Boom tip hook (optional)

Electric or Hydraulicwinch

Electric / Hydraulic

Two internal powered extensions (optional)

Continuous rotation /410O Rotation

Combining North American manufacturing, service and support with European technology

PSC

321

610

.12

Omaha Standard PALFINGER

3501 S. 11th St.

Council Bluffs, IA 51501

Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com

Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.Meets: OSHA 1910,180 requirements, ANSI B30.5 Safety Standards

Hydraulic system

• 12 Volt DC Power Supply

• 12V Power Pack / PTO and Pump Chassis Mounted

• 2,800psi (193bar) System

• 2.2 GPM (8.8 Liter/min.) / 3.5 GPM (13.2 Liter/min.)

• Nonintegrated load-holding valves on all cylinders

• Electronic overload protection system

• Proportional Crane Valve (optional)

• Proportional Crane Valve (standard)

Rotation system

• Slewing torque 2,130 ft. lbs. (2.89 kNm)

• Continuous Rotation / 410° Rotation

Control system

• Wireless Remote control unit

• Integrated E-stop button

• Manual valve activation capability

Winch

• Cable speed 19.6 ft./min (6.0 m/min.) / 21.0 ft./min (6.4 m/min.)

• Max winch force single line 2,000 lbs. (907 kg)

• Max winch force double line 4,000 lbs. (1820 kg)

• 80ft. (24.4m) of 1/4” (6.4mm) Galvanized Aircraft Cable

• Planetary electric winch / Planetary hydraulic winch

• Two-Block Damage Prevention System

Chassis specifications

• Chassis style Conventional cab

• Recommended GVWR 10,500 lbs.

• Base Plate Dimension 15”X 15” (381mm x 381mm)

• Hole Pattern 12” X 12” (305mm x 305mm)

• 1’’-8 UNC Thread

E-coat

• Crane components receive a submerged electrocoat primer

and topcoat finish paint for maximium durability and finish.

• E-coat is environment-friendly, recyclable, and economical

with the paint applied with a precise thickness over the entire

product so no paint is wasted.

Technical specifications

• Max lifting moment

• 12,500 ft. lbs. (1.7mt) @ 0°

• 14,560 ft. lbs. (2.0mt) @ 26°

• Power Extension to 11.4 ft. (3.47m) Manual Extension to 16’ (4.9m)

• Optional Internal Power Extension to 16’ (4.9m)

• Lifting height from base of crane 16’8” (5.1m)

• Crane weight base version 650lbs. (295kg) / 630 lbs. (285kg)

PSC 3216 Electric / Hydraulic Service Crane









Two internal powered extensions (optional)









PSC

401

610

.12


3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com


Hydraulic system



• 2.800psi (193bar) System






Rotation system



Control system




Winch













E-coat








• 18,500 ft. lbs. (2.5mt) @ 0°

• 23,235 ft. lbs. (3.2mt) @ 26°

• Power Extension to 11.4 ft. (3.47m) Manual Extension to 16’ (4.9m)

• Optional Internal Power Extension to 16’ (4.9m)











Two internal powered extensions










PSC

402

510

.12


3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com


Hydraulic system









Rotation system



Control system




Winch













E-coat








• 18,500 ft. lbs. (2.5mt) @ 0°

• 23,235 ft. lbs. (3.2mt) @ 26°


• Power Extension 25’ (7.6m)



PSC 4329PALFINGER Service Crane








PSC

432

910

.12

Hydraulic system• 3,045 psi system

• 30 gallon reservoir

• 8 GPM minimum crane requirement

• Power requirement of 24hp

• Powered by chassis integrated PTO and pump

• Integrated load-holding valves on all cylinders

• Integrated overload protection system

Rotation system• Slewing torque 4,920 ft. lbs

• Slewing speed 2 rpm

• Slewing angle 400o

Control system• Central control box

• Portable digital control unit

• Infinitely variable (proportional) function controls

• True multi-function (8) wireless remote control



Winch• Cable speed 60 ft/min

• Cable speed at 3rd wrap 51 ft/min

• Max winch capacity single line 4,000 lbs

• Max winch capacity double line 8,000 lbs

• Cable size 7/16 inch

• Rope length 120 ft

• Orbital hydraulic motor

• Planetery drive

• Integrated two-block damage prevention feature

Chassis specifications• Chassis style Conventional cab

• Front axle rating (FAWR) 7,000 lbs

• Rear axle rating (RAWR) 13,660 lbs

• CA 84“

• Minimum GVWR 19,500 lbs

E-coat• Crane components receive a submerged

electrocoat primer and topcoat finish paint

for maximium durability and finish.

• E-coat is environment-friendly, recyclable, and economical with

the paint applied with a precise thickness over the entire product

so no paint is wasted.


3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com


Crane rating 43,000 ft.lbsMax. lifting moment 49,180 ft.lbsMax. lifting capacity (Double Line) 8,000 lbsMax. hydraulic outreach 29‘ 2“Lifting height from base of crane 28‘ 6“Slewing angle 4000

Slewing torque 4,920 ft.lbsMax. operating pressure 3,045 psiCrane weight 2,160 lbs

PSC 4329 Service crane

Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.








Two internal powered extensions










PSC

502

510

.12


3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com


Hydraulic system









Rotation system



Control system




Winch


• Max winch force single line 2,500 lbs. (1136 kg) / 3000 lbs. (1364 kg)

• Max winch force double line 5,000 lbs. (2273 kg) / 6000 lbs. (2727 kg)








• Base Plate Dimension 16.75” X 16.75” (425mm x 425mm)

• Hole Pattern 14.75” X 14.75” (375mm x 375mm)


E-coat








• 30,500 ft. lbs. (4.2mt) @ 0°

• 34,580 ft. lbs. (4.8mt) @ 26°


• Power Extension 25’ (7.6m)



PSC 6229Palfinger Service Crane







PSC

622

910

.12

Hydraulic system• 3,045 psi system

• 30 gallon reservoir




• Integrated load-holding valves on all cylinders



• Slewing speed 2 rpm

• Slewing angle 400o








• Cable speed at 3rd wrap 51 ft/min




• Rope length 120 ft


• Planetary drive

• Integrated two-block damage prevention feature


• Front axle rating (FAWR) 12,000 lbs

• Rear axle rating (RAWR) 21,000 lbs

• CA 84“ to 120“

• Minimum GVWR up to 33,000 lbs




• E-coat is environment-friendly, recyclable, and economical with the

paint applied with a precise thickness over the entire product so no

paint is wasted.


Crane rating 62,000 ft.lbsMax. lifting moment 68,900 ft.lbsMax. lifting capacity (Double Line) 10,800 lbsMax. hydraulic outreach 29‘ 2“Lifting height from base of crane 28‘ 8“Slewing angle 4000

Slewing torque 6,800 ft.lbsMax. operating pressure 3,045 psiCrane weight 2,490 lbs



3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com


Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice.





hydraulic reach with its self centering hexagonal booms. North American manufacturing and components including SAE hoses

using JIC fittings, standard wireless remote control in conjucntion with an industry leading 24-month warranty on all major

components guarantee years of worry free usage.

European technology with North American manufacturing, service and support

PSC

722

910

.12

Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice. Note: (*) Estimated weight

Hydraulic system• 3,045 PSI System

• 30 Gallon Reservoir




• Integrated load-holding check valves on all cylinders



• Slewing speed 2 RPM

• Slewing angle 400 degrees








• Cable speed at 3rd rap 51 ft/min




• Rope length 131.2 ft


• Planetery drive

• Integrated anti-two blocking system


• Front axle rating (GAWR) 12,000 lbs

• Rear axle rating (GAWR) 21,000 lbs

• CA 84“ to 120“







paint is wasted.


Crane rating 72,000 ft.lbsMax. lifting moment 79,959 ft.lbsMax. lifting capacity (Double Line) 12,500 lbsMax. hydraulic outreach 29‘-2“Lifting height from base of crane 28‘-6“Slewing angle 4000

Slewing torque 7,053 ft.lbsMax. operating pressure 3,045 psiCrane weight* 2,612 lbs



3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com





hydraulic reach with its self centering hexagonal booms. North American manufacturing and components including SAE hoses

using JIC fittings, standard wireless remote control in conjucntion with an industry leading 24-month warranty on all major

components guarantee years of worry free usage.

European technology with North American manufacturing, service and support

PSC

862

910

.12

Applications shown in the leaflet do not always correspond to the standard specifications. Design and specification are subject to change without prior notice. Note: (*) Estimated weight

Hydraulic system• 3,045 PSI System

• 30 Gallon Reservoir




• Integrated load-holding check valves on all cylinders



• Slewing speed 2 RPM

• Slewing angle 400 degrees








• Cable speed at 3rd rap 51 ft/min




• Rope length 131.2 ft


• Planetery drive

• Integrated anti-two blocking system


• Front axle rating (GAWR) 12,000 lbs

• Rear axle rating (GAWR) 21,000 lbs

• CA 120“







paint is wasted.


Crane rating 86,000 ft.lbs.Max. lifting moment 94,628 ft.lbsMax. lifting capacity (Double Line) 13,986 lbsMax. hydraulic outreach 29‘-2“Lifting height from base of crane 28‘-6“Slewing angle 4000

Slewing torque 9,270 ft.lbsMax. operating pressure 3,045 psiCrane weight* 2,714 lbs



3501 S. 11th St.


Phone: 1-712-328-7444

Toll-Free: 1-800-279-2201

Fax: 1-800-568-7444

www.palfinger.com

Documents

PALFINGER Service Crane - Drive Products 4016 PALFINGER Service Crane One piece hexogonal boom sections with single weld seam Winch integrated two block damage prevention system Protective