ISO 4016-2001 DIN en ISO 4016-2001_Hexagon Head Bolts

8/22/2019 ISO 4016-2001 DIN en ISO 4016-2001_Hexagon Head Bolts

1/13

European Standard EN ISO 4016 : 2000 has the status of a DIN Standard.

A comma is used as the decimal marker.

National foreword

This standard has been published in accordance with a decision taken by CEN/TC 185 to adopt, withoutalteration, International Standard ISO 4016 as a European Standard.

The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Schrauben und Muttern mitAuenantrieb.

The DIN Standards corresponding to the International Standards referred to in clause 2 and in the bibliog-raphy of the EN are as follows:

ISO Standard DIN StandardISO 225 DIN EN 20225

ISO 724 DIN ISO 724

ISO 898-1 DIN EN ISO 898-1

ISO 3269 DIN EN ISO 3269



ISO/DIS 4759-1 DIN EN ISO 4759-1*)

ISO 8992 DIN ISO 8992

Amendments

DIN EN 24016, February 1992 edition, has been superseded by the specifications of EN ISO 4016, which is

identical to ISO 4016.

ICS 21.060.10

Sechskantschrauben mit Schaft

Produktklasse C (ISO 4016 : 1999)

Ref . No. DIN EN ISO 4016 : 2001-03English pr ice group 09 Sales No. 1109

07.01

DEUTSCHE NORM March 2001

EN ISO 4016

{

Continued overleaf.EN comprises 11 pages.

No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .

Hexagon head boltsProduct grade C(ISO 4016 : 1999)

English version of DIN EN ISO 4016

Supersedes DIN EN 24016,February 1992 edition.

*) Currently at draft stage.


2/13

Page 2DIN EN ISO 4016 : 2001-03

Previous editions

Supplement to DIN 556: 1926-10; DIN 556: 1923-02, 1925-04, 1936-04; Supplement 1 to DIN 601-1: 1942-11;DIN 601-1: 1941-01, 1951-09, 1963-03; DIN 602: 1925-07, 1936-07; DIN 601: 1925-07, 1934-07, 1967-12,1970-11, 1983-12, 1984-06; DIN EN 24016: 1992-02.

National Annex NA

Standards referred to(and not included in Normative references and Bibliography)

DIN EN 20225 Bolts, screws, studs and nuts Symbols and designations for dimensioning( ISO 225 : 1983)

DIN EN ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts,screws and studs (ISO 898-1 : 1999)

DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)

DIN EN ISO 4018 Hexagon head screws Product grade C (ISO 4018 : 1999)

DIN EN ISO 4042 Fasteners Electroplated coatings ( ISO 4042 : 1999)

DIN ISO 724 ISO general purpose metric screw threads Basic dimensions (ISO 724 : 1993)


3/13

English version

ICS 21.060.10 Supersedes EN 24016 : 1991.

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for Standardization

Comit Europen de Normalisation

Europisches Komitee fr Normung

Hexagon head boltsProduct grade C(ISO 4016 : 1999)

2000. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 4016 : 2000 E

Vis tte hexagonale part iellementfiletes Grade C (ISO 4016 : 1999)

Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

This European Standard was approved by CEN on 2000-10-26.

CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.

Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to anyCEN member.

The European Standards exist in three official versions (English, French, German).A version in any other language made by translat ion under the responsibili ty of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

November 2000

EN ISO 4016


4/13

Page 2EN ISO 4016 : 2000

Foreword

International Standard

ISO 4016 : 1999 Hexagon head bolts Product grade C,

which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and acces-sories, the Secretariat of which is held by DIN, as a European Standard.

This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by May 2001 at the latest.

In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:

Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement notice

The text of the International Standard ISO 4016 : 1999 was approved by CEN as a European Standard withoutany modification.


5/13

Page 3EN ISO 4016 : 2000


6/13

Page 4EN ISO 4016 : 2000


7/13

Page 5EN ISO 4016 : 2000


8/13

Page 6EN ISO 4016 : 2000


9/13

Page 7EN ISO 4016 : 2000


10/13

Page 8EN ISO 4016 : 2000


11/13

Page 9EN ISO 4016 : 2000


12/13

Page 10EN ISO 4016 : 2000


13/13

Page 11EN ISO 4016 : 2000

Documents

ISO 4016-2001 DIN en ISO 4016-2001_Hexagon Head Bolts