Upload
harshal-dhanawade
View
213
Download
0
Embed Size (px)
Citation preview
7/27/2019 owners_Manual_Cruze_3July12.pdf
1/209
Operat io n, Safety and Maintenan ce
Own er s Manua l
7/27/2019 owners_Manual_Cruze_3July12.pdf
2/209
7/27/2019 owners_Manual_Cruze_3July12.pdf
3/209
Dear Customer,
Welcome to the Chevrolet family. We wish to thank you for choosing Chevrolet car.
It is our constant endeavor to provide you with products that offer excellent performance through out their ownership period. Which iswhy, in addition to offering great cars, we have also set up an extensive, and very well equipped network of retailers and authorizedservice centres across the country.
Naturally, these Chevrolet retailers knows everything there is to know about your car, and provides you with the best service possible. Infact, every retailer is equipped with the most advanced technology, technicians specially trained by us, and genuine spares. Needless tosay, they are also committed to ensure your complete satisfaction.
So, please contact a Chevrolet retailer for any servicing need and make sure that only genuine spares are used for your car.
This manual will familiarize you with the operation and maintenance of your new vehicle. It will also provide you with important safetyinformation. Please do read it carefully and follow the recommendations. In fact, the manual is like a permanent part of your car. And itwould go a long way in ensuring a safe and trouble-free operation for your car.
Should you have any query please feel free to call our 24 hr. Helpline at 30308080 (Prefix local STD code when dialing from mobilephone) or email us at : [email protected].
Happy Motoring
7/27/2019 owners_Manual_Cruze_3July12.pdf
4/209
7/27/2019 owners_Manual_Cruze_3July12.pdf
5/209
7/27/2019 owners_Manual_Cruze_3July12.pdf
6/209
2 Introduction
INTRODUCTION
YourChevrolet Cruze (vehicle) is adesigned combination of advancedtechnology, safety, environmentalfriendliness andeconomy.
This Owner's Manualprovides youwithall thenecessary information toenableyoutodriveyourvehicle safelyandefficiently.
Makesureyourpassengersare awareof thepossible risk of accident and
injurywhichmayresultfrom improperuseofthevehicle.
You must always comply with thespecific laws and regulations of thecountrythatyouare in. Theselaws maydiffer from the information in thisOwner'sManual.
When this Owner's Manual refers to aCHEVROLET retailer visit, we recommend your Chevrolet Service
Partner.All Chevrolet Service Partners providefirst-class service at reasonable prices.Experienced mechanics trained by Chevrolet work according to specificChevrolet instructions.
The customer literature pack shouldalways be kept ready to hand in thevehicle.
USING THIS MANUALn This manual describes all options and
features available for this model.Certain descriptions, including thosefor display and menu functions, maynot apply to your vehicle due tomodel variant, country specifica-tions, special equipment or accesso-
ries.
The "Inbrief section will give youan initial overview.
n The table of contents at thebeginning of this manual and within each chapter shows wherethe information is located.
n The index will enable you to searchfor specific information.
n The Owner's Manual uses thefactory engine designations. Thecorresponding sales designationscan be found in the chapter"Technical data".
n
INTRODUCTION
Introduction ...................................... 2
Using this manual ............................. 2
Danger, warnings and cautions ......... 3
In brief............................................... 4
Vehicle unlocking ............................. 4
Seat adjustment ................................ 5
Head restraint adjustment ................ 7
Seat belt ............................................ 7
Mirror adjustment ............................ 7
Steering wheel adjustment ............... 8
Instrument panel overview ............... 9
Exterior lighting ............................. 11
Horn ............................................... 12
Washer and wiper system ............... 12
Climate control ............................... 13Transmission .................................. 14
Starting OFF ................................... 14
Parking ........................................... 16
Exterior Mirrors ............................... 8
7/27/2019 owners_Manual_Cruze_3July12.pdf
7/209
3Introduction
Caution
Text marked Caution providesinformation onpossibledamage tothe vehicle. Disregarding thisinformation may lead to vehicledamage.
n
front or back, always relate to thedirection of travel.
n The vehicle display screens maynot support your specific language.
n Depending on the model variant,country variant, integrated specialequipment and accessories, thescope of equipment of your vehiclecan differ from the descriptions inthisOwner's Manual.
DANGER, WARNINGS ANDCAUTIONS
Directionaldata, e.g. left or right, or
Danger
Text marked Danger providesinformation on risk of fatal injury.Disregarding this information mayendanger life.
Warning
Text marked Warning providesinformation on risk of accident orinjury. Disregarding this informationmay lead to injury.
Symbols
Page references are indicated with .means "see page".
We wish you many hours of pleasurabledriving Chevrolet.
* or (Option) : The asterisk and(Option) in this manual signify an itemof equipment that is not included on allvehicles. Such items include engineoptions, model variations specific toone country, and optional equipment.
All information, illustrations, andspecifications in this manual are basedon the latest product informationavailable at the time of publication.
General Motors India Pvt. Ltd. (GMI)reserve the right to change specifica-
2
tions or designs at any time withoutnotice and without incurring obligation.
This vehicle may not comply with thestandards or regulations of othercountries. Before attempting to registerthis vehicle in any other country, checkall applicable regulations and make anynecessary modifications.
This manual describes the options andtrims available at the time of publica-tion. Some of the items covered may not
apply to your vehicle. Contact yourCHEVROLET retailer for informationon option and trim availability.
Non-GMI genuine parts and accesso-ries have not been examined orapproved by GMI. We can certifyneither the suitability nor the safety ofnon-GMI genuine parts and accessoriesand are not liable for damage caused bytheir use.
Warning : Tampering of wiringharness or fitment of non genuineaccessories in your vehicle may lead toshort circuit resulting in fire.
7/27/2019 owners_Manual_Cruze_3July12.pdf
8/209
4 Introduction
VEHICLE UNLOCKING
RADIO REMOTE CONTROL* ELECTRONIC KEY*
Press button to unlock the doors andload compartment. Open the doors bypulling the handles, to open the tailgate,press the button under the tailgatemoulding.
Press button , only the loadcompartment is unlocked and opens.
Radio remote control 17, Centrallocking system 20, Load compart-ment 25.
c
333
The operator must keep the electronickey with him. Pull the door handle tounlock the vehicle and to open thedoor. To open the tailgate, press thebutton under the moulding.
Electronic key system 19.
IN BRIEF
INITIAL DRIVEINFORMATION
7/27/2019 owners_Manual_Cruze_3July12.pdf
9/209
5Introduction
SEAT BACKREST
Pull handle, slide seat, release handle.
Seat adjustment 37, Seat position36.
00
Pull lever, adjust inclination and releaselever. Allow the seat to engage audibly.Do not lean on backrest when adjusting.
Seat adjustment 37, Seat position36.
00
SEAT POSITIONING
SEAT ADJUSTMENT (Manual)Passenger Side
7/27/2019 owners_Manual_Cruze_3July12.pdf
10/209
SEAT BACKREST
SEAT POSITIONING
To move the seat forward or backward,move and hold the switch forward orbackward. When the seat reaches thedesired position, release the switch.
SEAT HEIGHT
To adjust the height of the entire seatcushion, move the switch upwards or
downwards at rear.SEAT INCLINATION
To adjust the inclination of the seatcushion, move the switch upwards ordownwards at front.
Pull lever, adjust inclination and releaselever. Allow the seat to engage audibly.
Do not lean on seat when adjusting.
Overload
If the seat setting is electrically
overloaded, the power supply isautomatically cut off for a short time.
SEAT ADJUSTMENT (Power)Driver Side
Warning
Care must be taken when operatingthe power seats. There is a risk ofinjury, particularly for children.Articles could become trapped.Never leave the remote control in thevehicle when leaving the vehicle!Risk of injury to unsupervisedpersons in event of power seatadjustment.Keep a closed watch on the seats
when adjusting them. Vehiclepassengers should be informedaccordingly.
6 Introduction
7/27/2019 owners_Manual_Cruze_3July12.pdf
11/209
SEAT BELT
For height adjustment, pull the headrestraint upward. Tomovedown pressthe catchandpush thehead restraintdownwards.
Head restrains 35.
Pull out the seat belt and engage in beltbuckle. The seat belt must not betwisted and must fit close against thebody. The backrest must not be tiltedback too far (maximum approx. 25 ).
To release belt, press red button on beltbuckle.
Seat belts 40, Airbag system 43,Seat position 36.
HEAD RESTRAINTADJUSTMENT
MIRROR ADJUSTMENT
INTERIOR MIRRORMANUAL ANTI-DAZZLE
To reduce dazzle, pull the lever on theunderside of the mirror housing.
Interior mirror 29, Automatic anti-dazzle interior mirror* 30.
7Introduction
7/27/2019 owners_Manual_Cruze_3July12.pdf
12/209
EXTERIOR MIRRORS
Select the relevant exterior mirror andadjust.
Electric adjustment 28, Convex
exterior mirrors 28, Folding
exterior mirrors 29, Heated
exterior mirrors 28.
Unlock lever, adjust steering wheel,then engage lever and ensure it is fullylocked. Do not adjust steering wheelunless vehicle is stationary and steeringwheel lock has been released.
Airbag system 43,
Ignition positions 92.
STEERING WHEELADJUSTMENT*
8 Introduction
7/27/2019 owners_Manual_Cruze_3July12.pdf
13/209
INSTRUMENT PANEL OVERVIEW
15 16 17 18 19 21 24 26 25 22 20 23 27 28
128745639101112139142
29
9Introduction
30
7/27/2019 owners_Manual_Cruze_3July12.pdf
14/209
1 Light switch .............................. 79Front fog Lamp ......................... 81Headlamp range adjustment.......81
Instrument illumination ............ 822 Side air vents ............................ 883 Windscreen wiper/washer ........ 584 Instruments ...............................635 Horn ......................................... 58
Driver' s airbag system .............. 446 Driver InformationCenter ........ 727 Remote control for
infotainment system .............. 1458 Turn signals headlight flash
low beam and high beam ......... 79Exit lighting ............................. 83Driver InformationCenter ........ 72
9 Centre air vents ....................... 8810 Infotainment system .............. 14111 Info-Display ............................. 7212 Anti-theft alarm system
status LED ................................ 25
13 Storage ..................................... 5114 Frontpassenger airbag ............ 4415 Glove box ................................ 5216 Heating, Ventilation,
Climate control system ............ 8517 Selector lever, automatic
transmission ............................. 98Manual transmission .............. 101
18 Hazard warning flashers .......... 8019
Central locking
system
............
20
20 Accelerator pedal ..................... 9121 Start/Stop button electronic key
System ..................................... 1922 Brake pedal ............................ 10223 Ignition switch with steering
wheel lock ................................ 9224 Clutchpedal ............................. 9125 Steering wheel adjustment ...... 5726 Cruise Control ....................... 10327 Storage compartment ............... 5128 Bonnet release lever .............. 110
29 Fan Speed ................................. 87
30 Instrument panel fuse box ...... 127
INSTRUMENT PANELOVERVIEW
10 Introduction
7/27/2019 owners_Manual_Cruze_3July12.pdf
15/209
EXTERIOR LIGHTING
HEADLIGHT FLASH, HIGHBEAM AND LOW BEAM
To turn the head, tail and parking lampson or off, rotate the knob clockwise andcounter clockwise.The knob has three positions whichactivate various lamp functions asfollows :Turn light switch:
= Lights off.
= Position lights.= Headlights
Press := Front fog lights
Lighting 79.
Headlight flash = Pull lever
High beam = Push lever
Low beam = Push or pull lever
High beam 79, Headlight flash 80.
11Introduction
Right = Lever down
Left = Lever up
Turn and lane change signal 80.
TURN AND LANE-CHANGESIGNALS
LIGHT SWITCH
7/27/2019 owners_Manual_Cruze_3July12.pdf
16/209
HAZARD WARNING FLASHERS
HORN
Operated with the button.
Hazard warning flashers 80.
Press .
12 Introduction
WINDSCREEN WIPERS
=
=
=
=
For a single swipe when the windscreenwipers are off, press the lever up.
Windscreen wipers 58, Wiperreplacement 117.
Off
Timed interval wiping orautomatic wiping with rainsensor*
Slow
Fast
WASHER AND WIPER
SYSTEM
7/27/2019 owners_Manual_Cruze_3July12.pdf
17/209
Heating is operated by pressing thebutton.
Heated rear window 32.
CLIMATE CONTROL
Pull lever.
Windscreen washer system 60,
Washer fluid 116.
WINDSCREEN WASHERSYSTEM
HEATED REAR WINDOW,HEATED EXTERIOR MIRRORS*
13Introduction
Press button .
Set temperature control to warmestlevel.
Cooling on.
Heated rear window on.
Electronic climate control system 85.
DEMISTING AND DEFROSTINGTHE WINDOWS
7/27/2019 owners_Manual_Cruze_3July12.pdf
18/209
TRANSMISSION
MANUAL TRANSMISSION AUTOMATIC TRANSMISSION
Reverse : With the vehicle stationary,declutch and then pull up the ring on theselector lever and engage the gear.
If the gear does not engage, set the leverin neutral, release the clutch pedal anddepress again; then repeat gearselection.
Manual transmission 101.
P = ParkR = ReverseN = NeutralD = DriveManual mode: move selector leverfrom Dto the left.
= Higher gear
= Lower gearThe selector lever can only be movedout of Pwhen the ignition is on and thebrake pedal is applied. To engage PorR, push the release button.Automatic transmission 98.
14 Introduction
STARTING OFF
CHECK BEFORE STARTING OFF
n
172.
n Engine oil level and fluid levels113.
n All windows, mirrors, exteriorlighting and number plates are freefrom dirt, snow and ice andoperational.
n Proper position of seats, seat belts
and mirrors 36, 40, 28.n Check brake function at low speed,
particularly if the brakes are wet.
Tyre pressure and condition 1293
3
7/27/2019 owners_Manual_Cruze_3July12.pdf
19/209
STARTING ENGINE WITH THEIGNITION SWITCH
n
n Move the steering wheel slightly torelease thesteering wheel lock.
n Manual transmission: operateclutch;
n Automatic transmission: operatebrake and move selector lever in Por N;
n Do not accelerate;n Diesel engine: turn the key to
position 2 for preheating untilcontrol indicator goes out;
Turn key toposition1.
Turn key to position 3and releasewhen engine is running.
Before restarting or to switch off theengine, turn key back to 1.
15Introduction
STARTING ENGINE WITH THESTART/STOP BUTTON*
n The electronic key must be in thevehicle interior or the operatorcarries the key around with him;
n Manual transmission: operateclutch;
n Automatic transmission: operatebrake and move selector lever in P
orN;
n Do not accelerate;
7/27/2019 owners_Manual_Cruze_3July12.pdf
20/209
PARKING
n Always apply pa rk ing br ake without pressing release button.Apply as firmly as possible on adownhill slope or uphill slope.Operate foot brake at same time toreduce operating force.
n Switch off the engine and ignition.Turn the ignition key to 0, removeand turn the steering wheel until thesteering wheel lock is felt toengage. Vehicles with electronickey system: with the vehiclestationary, press the Start/Stopbutton and open the driver's door.For vehicles with automatictransmission, move selector leverto Pposition and removekey.
n If the vehicle is on a level surface oruphill slope engage first gear or setthe selector lever to P beforeswitching off the ignition. On anuphill slope, turn the front wheelsaway from thekerb.If the vehicle is on a downhill slope,engage reverse gear or set theselector lever to Pbefore switching
n Press Start/Stop button and releasewhen the engine is running. The
green LED will illuminate as soonas the engine is running.
Press button again while engine isrunning to switch off theengine.
16 Introduction
off the ignition. Turn the frontwheels towards thekerb.
n Close windows and sunroof.n Lock the vehicle with button on
the remote control or, withelectronic key system, touch thesensor on thedoor handle.
n Activate the anti-theft alarm system25.
n Do notpark the vehicle on an easyflammable surface. The hightemperature of the exhaust systemcould ignite thesurface.
n The engine cooling fans may runafter the engine has been switchedoff .
n After running at high engine speedsor with high engine loads, operatethe diesel engine briefly at a lowload or run in neutral for about 1 to
2 minutes at idle speed beforeswitching off in order to protect theturbocharger.
Keys, locks 17.
3
7/27/2019 owners_Manual_Cruze_3July12.pdf
21/209
17Keys, doors and windows
KEYS, DOORS ANDWINDOWS
KEYS, LOCKS
KEYS
Replacement keysThe key number is specified on adetachable tag.
The key number must be quoted whenordering replacement keys as it is acomponent of the immobiliser system.
Key with foldaway key section
Pressbuttontoextend.Tofoldthe key,firstpressthebutton.
RADIO REMOTE CONTROL
Usedtooperate:
n Centrallockingsystem
n Anti-theftalarmsystem
n Loadcompartment
Theradioremotecontrolhasarange ofapprox. 15metres.Thisrangecan be
affectedbyoutsideinfluences.
Thehazardwarning flashersconfirmoperation.
Keys, locks ..................................... 17Doors .............................................. 25
Vehicle security .............................. 25
Exterior mirrors .............................. 28
Interior mirror ................................ 29
Heated rear windows ...................... 32
Sun visors ....................................... 32
Sunroof ........................................... 33
7/27/2019 owners_Manual_Cruze_3July12.pdf
22/209
18 Keys, doors and windows
Handle with care, protect it frommoisture and high temperatures andavoid unnecessary operation.
Fault
If the central locking system cannot beoperated with the radio remote control,it may be due to the following:
n Range exceeded,
n Battery voltage too low,
n Frequent, repeated operation of theremote control while not in range,which will require resynchroni-sation,
n
operating at frequent intervals, the
power supply is interrupted for ashort time,
n Interference from higher-powerradio waves from other sources.
Basic settings
Some settings can be changed in themenu Settings in the Info-Display.
Vehicle personalisation 76.
Radio remote control batteryreplacement
Replace the battery as soon as the rangereduces.
Batteries do not belong in householdwaste. They must be disposed of at anappropriate recycling collection point.
Overloading the central locking by
Extendthekeyandopentheunit
Replacethebattery(batterytypeCR 2032), payingattentiontothe installationposition.Close theunit andsynchro-nise.
Have the battery replaced by aCHEVROLET retailer.
.
7/27/2019 owners_Manual_Cruze_3July12.pdf
23/209
19Keys, doors and windows
MEMORISEDSETTINGS*
By removing the key out of the ignitionlock the settings are automaticallysaved for the used key:
n Electronic climate control
n Lighting
n Infotainment system
n Power door locks
The saved settings are automaticallyused when the key is inserted into theignition lock.
Vehicle personalisation 76.
ELECTRONIC KEY SYSTEM*
Makes operation of the followingpossible without the use of themechanicalkeyn Centrallockingsystem,n Anti-theftalarmsystem,n Ignitionandstarter.Theelectronickeysimplyneedstobeonthedriver'sperson.
Note
Do not put the electronic key in theload compartment or in front of theInfo-Display.
The sensor fields in the doorhandles must be kept clean toensure unrestricted functionality.
Starting the engine 93.
7/27/2019 owners_Manual_Cruze_3July12.pdf
24/209
20 Keys, doors and windows
Radio remote control
The electronic key also has a radioremotecontrol feature.
Replacing battery in electronic key
Replace the battery as soon as thesystem no longer operates properly orthe range is reduced. The need forbattery replacement is indicated by an
error code in the Driver InformationCenter 72.
Batteries do not belong in householdwaste. They must be disposed of at anappropriate recycling collection point.
Replacing the battery 18.
Replace the battery (battery type CR 2032), noting the installation position.Engage caps.
Radio remote controlsynchronisation
The radio remote control synchronisesitself automatically during everystarting procedure.
Fault
If the central locking cannot beoperated or the engine cannot bestarted, the cause may be one of thefollowing:
n Fault in remote control 18,
n Electronic key out of receptionrange.
To rectify the cause of the fault, changethe position of the electronic key.
Central locking systemUnlocks and locks doors, load compart-ment and fuel filler flap.
A pull on an interior door handleunlocks and opens the door.
Note
In the event of an accident of acertain severity, the vehicle unlocksautomatically.
Unlocking
Radio remote control
Press button .
It is configurable to unlock only the
driver's door by pressing button onceand to unlock all doors, load compart-ment and fuel filler flap by pressingbutton twice.
7/27/2019 owners_Manual_Cruze_3July12.pdf
25/209
21Keys, doors and windows
Settings can be changed in the menuSettings in the Info-Display. Vehicle
personalisation 76. The settings canbe stored by the key being used,memorised settings 19.
Electronic key system
Pull a door handle or press the buttonunder the trunk lid moulding. Theelectronic key must be outside the
vehicle, within a range of approxi-mately one metre.
If you pull the door handles of thedriver's door or the right rear door when
the electronic key is located in thedriver's door side (although you pull the
door handles of the passenger's door orrear door, the doors do not open.),
all doors will be unlocking and beopened automatically. This functioncan be changed in the Info-Display.Ifyou pull the door handles of thepassenger's door or rear door whenthe electronic key is located in thepassenger's door side (although youpull the door handles of the driver's
door or the right rear door, the doors donot open), all doors will be unlockingand be opened automatically. Thisfunction can be changed in the Info-Display.The door may not be opened ifyou touch the sensor field at the sametime while pulling the door handle.
Locking
Radio remote controlClose doors, load compartment and fuelfiller flap.
left
left
Press button .
If the driver's door is not closedproperly, the central locking systemwill not work. Activation or deactiva-tion of this function in the menuSettings in the Info-Display. Vehiclepersonalisation 76.
7/27/2019 owners_Manual_Cruze_3July12.pdf
26/209
22 Keys, doors and windows
Electronic key system
Touch the sensor field in the door handleofoneofthefrontdoors.
The electronic key must be outside thevehicle, within a range of approxi-matelyonemeter. If theother electronickey is inside the vehicle, doors arelocked and the key inside the vehiclewill be deactivated.
It can bechecked that the door is lockedor unlocked as the position of the doorlock button inside your vehicle. If youpull the door handle within 3 secondsafter locking the door by the touch
sensor, thedoor will notbe opened.
Note
The vehicle is not automaticallylocked.
Unlocking the tailgate
Press button . The tailgate willunlock and open, whilst all other doorsremain locked.
Press the button to unlock.
Press the button to lock.
When the key is in the ignition lock,locking is only possible if all doors areclosed.
Central locking buttons
Locks or unlocks all doors, the load
compartment and fuel filler flap.
7/27/2019 owners_Manual_Cruze_3July12.pdf
27/209
23Keys, doors and windows
Fault in radio remote control systemor electronic keysystem
Unlocking
Manually unlock the driver's door byturning the key in the lock. Switch onthe ignition and press the centrallocking button to unlock all doors,load compartment and fuel filler flap.To deactivate the anti-theft locking
system, switch on the ignition.Locking
Switch on the ignition and press thecentral locking button to lock thedoors, load compartment and fuel filler
flap. Then close the driver's door andlock it from the outside with the key.
Fault in central locking system
Unlocking
Manually unlock the driver's door byturning the key in the lock. The otherdoors can be opened by using theinterior handle twice. The fuel filler flapcannot be opened. To deactivate theanti-theft locking system, switch on theignition 25.
LockingPush inside locking knob of all doorsexcept driver's door. Then close thedriver's door and lock it from theoutside with the key. The fuel filler flapand tailgate cannot be locked.Automatic locking*
Automatic locking after driving off
This security feature can be configured
to automatically lock all doors, loadcompartment and fuel filler flap as soonas the vehicle starts to drive.Settings can be changed in the menuSettings in the Info-Display. Vehiclepersonalisation 76.
This locking will be unlockedautomatically if any of following occur:
- For automatic transmission, whenthe selector lever is in P afterdriving.
- For manual transmission, when thekey is removed from the ignitionswitch after driving.
- With both electronic key andmanual transmission, when theengine is stopped by pressing theStart/Stop button after driving.
The settings can be stored by the keybeing used 19.
7/27/2019 owners_Manual_Cruze_3July12.pdf
28/209
24 Keys, doors and windows
Caution
Do not unlock the door whiledriving. If a passenger opens thedoor by accident, it can result inserious injury or death in case of anunexpectedaccident.
If the door is unlocked manually,lock it again using the door lockbutton for safety.
CHILD LOCKS
Warning
Use the child locks wheneverchildrenareoccupyingtherear seats.
Caution
Do not pull the inside door handlewhile the child security door lock isset to LOCK position. To do so candamagethe insidedoor handle.
Using a key or suitable screwdriver,turn the child locks in the rear doorsinto horizontal position. Doors cannotbe opened from inside. For deactivationturn the child locks into verticalposition.
7/27/2019 owners_Manual_Cruze_3July12.pdf
29/209
25Keys, doors and windows
DOORS
LOAD COMPARTMENT
Opening
Push button on radio remote controluntil the tailgate is opened, or push thebutton under the tailgate moulding afterunlocking.
Warning
Do not drive with the tailgate open orajar, e.g. when transporting bulkyobjects, since toxic exhaust gasescould enter the vehicle.
Caution
Before opening the tailgate checkoverhead obstructions, such as agarage door, to avoid damage of thetailgate. Always check the movingarea above and behind the tailgate.
Note
The installation of certain heavyaccessories onto the tailgate mayaffect itsability to remainopen.
Closing
Do not press the button under themoulding while closing as this willunlock it again.
VEHICLESECURITY
ANTI-THEFTALARMSYSTEM
Anti theft alarm system monitorsn Doors tailgate bonnetn Ignition
Activation
TAIL GATE
n
locking the vehicle (initialisation of
thesystem),or
n Radio remote control: directly bypressing once more after locking,or
Self-activated 30 seconds after
7/27/2019 owners_Manual_Cruze_3July12.pdf
30/209
n
touching the sensor field in the door
handle once more after locking.
Electronic key system: directly by StatusLED
Status LED is integrated in the sensoron top of the instrumentpanel.Status during the first 30 seconds ofanti-theft alarmsystem activation:LED = Test, armingdelay.illuminatesLED flashes = Doors, tailgate orquickly bonnet not
completelyclosed,or system fault.
Statusafter system is armed:LED flashes = System is armed.slowlySeek the assistance of a CHEVROLETretailer in the event of faults.Deactivation
Unlocking the vehicle by pressingbutton or pulling the door handledeactivates anti-theft alarm system.
26 Keys, doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
31/209
Alarm
The alarm can be silenced by pressingany button of the radio remote controlor by switching on the ignition.
The anti-theft alarm system can bedeactivated only by pressing the button
or by pulling the door handle (onlyelectronic key system) or switching onthe ignition.
c
IMMOBILISER
The system is integrated into theignitionswitchandcheckswhether thevehicleisallowedtostartwiththe keybeing used. If the transponder in the keyis recognised, the vehicle can be started.
The electronic immobiliser activatesitself automatically after the key hasbeen removed from the ignition switchor when the engine is switched off bypressing the Start/Stop button.
If the control indicator flashes orilluminates when the ignition is on,there is a fault in the system; the enginecannot be started. Switch off theignition and then repeat the startattempt.
If the control indicator continuesflashing or illuminating, attempt to startthe engine using the spare key and seek
the assistance of a CHEVROLETretailer.
Note
The immobiliser does not lock the
doors. You should always lock thevehicle after leaving it and switchon the anti-theft alarm system 25.
Control indicator 71.
27Keys, doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
32/209
EXTERIOR MIRRORS
CONVEX SHAPE
The convex exterior mirror reducesblind spots. The shapeof themirrormakes objects appear smaller, whichwill affect the ability to estimatedistances.
ELECTRICADJUSTMENT
Select the relevant exterior mirror byturning the control to left (L)or right(R).Inposition 0 no mirror is selected.Then swivel the control to adjust themirror.
Folding
For pedestrian safety, the exteriormirrors will swing out of their normalmounting position if they are struckwith sufficient force. Reposition themirror by applying slight pressure tothemirror housing.
Electric folding*
Turn control to 0, then push the controldown. Both exterior mirrors will fold.
Push the control down again - bothexterior mirrors return to their originalposition.
If an electrically retracted mirror ismanually extended, pressing down theadjuster will only electrically extend
the other mirror.
28 Keys, doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
33/209
Warning Heated
Operated by pressing the button.
Heating works with the engine runningand is switched off automatically after ashort time.
Always keep your mirrors properlyadjusted, and use them while drivingto increase your visibility of objectsand other vehicles around you. Do notdrive while either outside rearviewmirror is folded back.
INTERIOR MIRROR
MANUAL ANTI-DAZZLE
To reduce dazzle, pull the lever on theunderside of the mirror housing.
29Keys, doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
34/209
30 Keys, doors and windows
AUTOMATIC ANTI-DAZZLE*
Dazzle from following vehicles at nightis automatically reduced.
POWER WINDOWS
Warning
Take care when operating the powerwindows. Risk of injury, particularlyto children.
If there are children on the rear seat,switch on the child safety system forthepower windows.
Keep a close watch on the windowswhen closing them. Ensure that
nothing becomes trapped in them asthey move.
Powerwindowscanbeoperated
- Withignitionon,
- Within10minutesafterswitchingignitionoff.
After switching off the ignition,window operation is disabled when thedriver's or passenger's door is opened.
Express Window Operation
Your vehicle may have windows withan express up or down feature. Thisfeature allows the window to be
lowered or raised without holding theswitch. Driver side window have
express up and down feature with safetyfunction, passenger side and rearwindows only have express down. Pulla window switch up or push it down allthe way, release it, and the window goesup or down automatically. Stop thewindow by pushing or pulling theswitch.
Operate theswitchfor therespectivewindowbypushingtoopenorpullingtoclose.
31K d d i d
7/27/2019 owners_Manual_Cruze_3July12.pdf
35/209
Operation of front power window(Driver side) with safety function
Pushing or pulling lightly to the firstdetent: window moves down or up aslong as switch is operated.
Pushing or pulling stronger to thesecond detent and then releasing:Window moves down or up automati-cally with safety function. To stopmovement, operate the switch oncemore in the same direction.
Operation of front (Passenger side)and rear power windows withoutsafety function
Pushing or pulling lightly to the firstdetent: window moves down or up aslong as switch is operated.
Pushing stronger to the second detentand then releasing: Window movesdown automatically. To stop move-ment, operate the switch once more inthe same direction.
31Keys, doors and windows
Warning
Bodyparts outside vehicle canbestruckbypassingobjects.Keepallpartsofbodyinsidevehicle.
Childsafetysystemfor rear windows
Press switch to deactivate rear doorpower windows, the LED lights up. Toactivate press again.
Safety function
If the Driver side window glass
encounters resistance above the middleof the window during automaticclosing, it is immediately stopped andopened again.
Override safety function
In the event of closing difficulties dueto frost or the like, hold the switchpulled. The window moves up without
safety function. To stop movement,release and operate the switch oncemore in the same direction.
32 K d d i d
7/27/2019 owners_Manual_Cruze_3July12.pdf
36/209
Overload
Ifthewindowsarerepeatedly operated
within short intervals, the windowoperationisdisabledfor sometime.
Initialisingthepowerwindows
If the windows cannot be closedautomatically (e.g. after disconnectingthe vehicle battery), activate thewindowelectronicsas follows:
1. Closedoors.
2. Switchonignition.
3. Closethewindowcompletelyandkeep the switchpulled for addi-tional2seconds.
4. Repeatforeachwindow.
32 Keys, doors and windows
HEATED REAR WINDOW
Operated by pressing the button.
Heating works with the engine runningand is switched off automatically after ashort time.
Caution
Do not use sharp instruments orabrasivewindowcleanersonyour
vehicle'srearwindow.Do not scratch or damage thedefrosterwireswhenyoucleanorworkaroundtherearwindow.
SUN VISORS
Thesunvisorscanbefoldeddownorswivelled to the side to preventdazzling.
Ifthesunvisorshaveintegralmirrors,the mirror covers shouldbe closedwhendriving.
Sunvisor with lighted vanity mirror
Pull the passenger side visor down andlift the cover to access the mirror.
A light comes on when the cover islifted and goes off when it is closed.
33Keys doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
37/209
ROOF
WarningTake care when operating the sunroof. Risk of injury, particularly tochildren.
Keep a close watch on the movableparts when operating them. Ensurethatnothing becomes trapped in themas they move.
Sun roof canbe operated With ignition on, Within 10 minutes after switching
ignition off,
After switching off the ignition, sunroof operation is disabled when driver'sorpassenger's door is opened.
33Keys, doors and windows
Operate the switches as follows:
Open or close
Press or gently to the first detent:sun roof is opened or closed as long asthe switch is operated.
Press or firmly to the seconddetent: and then release sun roof isopened or closed automatically withenabled safety function. To stop
movement, operate the switch oncemore.
Raise or close
Press or : sun roof is raised or
SUN ROOF* closed automatically.
To stop movement, operate the switch
once more.
Safety function
If the sun roof encounters resistanceduring automatic closing, it is immedi-
ately stopped and opened again.
Override safety function
In the event of closing difficulties dueto frost or the like, hold the switch
pressed until the sun roof is closed.The sunroof closes without safetyfunction. To stop movement, release theswitch.
Sunblind
The sunblind is operated manually.Close or open the sunblind by sliding.When the sun roof is open, the sunblindis always open.
34 Keys doors and windows
7/27/2019 owners_Manual_Cruze_3July12.pdf
38/209
34 Keys, doors and windows
NOTE
35Seats restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
39/209
35Seats, restraints
HEAD RESTRAINTS
Position
WarningOnly drive with the head restraint setto theproperposition.Removed or improperly adjustedhead restraints can result in serioushead and neck injuries in case of acollision.
Make sure that the head restraintreadjustedbeforedriving.
Themiddleoftheheadrestraint shouldbeateyelevel. Ifthisisnot possiblefor
extremely tallpersons, set tohighestposition, andsetto lowestpositionforsmallpeople.
Head restraints on front seatsHeightadjustment
Pull thehead restraint upward.To move down, press the catch andpush thehead restraint downwards.
SEATS, RESTRAINTS
Head restraints ............................... 35
Front seats ...................................... 36
Rear seats ....................................... 39
Seats belts ....................................... 40
Airbag system ................................ 43
Child restraints ............................... 45
36 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
40/209
FRONT SEATS
Headrestraintsonrearseats
Heightadjustment
Pull thehead restraint upward.To move down, press the catch andpush thehead restraint downwards.
SEAT POSITION
WarningOnly drive with the seat correctlyadjusted.
n
against the backrest as possible.Adjust thedistancebetween the seatand
the pedals so
that your legs
areslightly angled when tromping the
pedals. Slide the passenger seat asfarback as possible.
Sit with your buttocks as far back
n
against the backrest as possible. Set
the backrest rake so that you caneasily reach the steering wheel withyour arms slightly bent. Maintaincontact between your shoulders andthe backrest when turning thesteering wheel. Do not angle thebackrest too far back. We recom-mend a maximum rake of approx.25 .
n Adjust the steering wheel 57.
n Set seat height high enough to havea clear field of vision on all sidesand of all display instruments.There should be at least one hand ofclearance between your head andthe headlining. Your thighs shouldrest lightly on the seat withoutpressing into it.
n Adjust the head restraint 35.
n Adjust the height of the seat belt40.
Sit with your shoulders as far back
3
36 Seats, restraints
37Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
41/209
SEAT ADJUSTMENT (Manual)
Danger
Do not sit nearer than 25 cm from thesteering wheel, topermit safe airbagdeployment.
Warning
Never adjust seats while driving asthey could move uncontrollably.
Seat positioning
Pull handle, slide seat, release handle.
Seat backrest
Pull lever, adjust inclinationand releaselever. Allow the seat to engage audibly.Do not lean on seat when adjusting.
,
Passenger Side
38 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
42/209
SEAT BACKREST
SEAT POSITIONINGTo move the seat forward or backward,move and hold the switch forward orbackward. When the seat reaches thedesired position, release the switch.
SEAT HEIGHT
To adjust the height of the entire seatcushion, move the switch upwards ordownwards at rear.
SEAT INCLINATION
To adjust the inclination of the seatcushion, move the switch upwards ordownwards at front.
Pull lever, adjust inclination and releaselever. Allow the seat to engage audibly.
Do not lean on seat when adjusting.
Overload
If the seat setting is electricallyoverloaded, the power supply is
automatically cut off for a short time.
SEAT ADJUSTMENT (Power)
Warning
Care must be taken when operatingthe power seats. There is a risk ofinjury, particularly for children.Articles could become trapped.Never leave the remote control in thevehicle when leaving the vehicle!Risk of injury to unsupervisedpersons in event of power seat
adjustment.Keep a closed watch on the seatswhen adjusting them. Vehiclepassengers should be informedaccordingly.
,
Driver Side
39Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
43/209
ARMREST
Armrest between front seats
Pushbutton and fold armrest upwards.The open armrest contains a stowagecompartment.
Horizontaladjustment
REAR SEATS
ARMREST
Fold armrest downbypulling the strap.The folded armrest contains a drinkholder.
Warning
Use caution when using the drinkholders. A spilledbeverage that is veryhot can injure you or your passenger.Spilled liquids can damage interiortrim and electrical components.Do notplace objects other than cupsor cans in the drink holder. Theseobjects canbe thrown out in theeventof a sudden stop or an accident,possibly injuring the passengers inthe vehicle.
Push lever to slide thearmrest.
40 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
44/209
SEATS BELTS
Seat belt reminder for driver's seat, seatbelt control indicator 69.
The belts are locked during heavyacceleration or deceleration of thevehicle for thesafety of the occupants.
Warning
Fastenseatbelt before each trip.In the event of an accident personsnot wearing seatbelts endanger theirfellowoccupants and themselves.
Seatbelts are only designed for use byone person at a time. They are notsuitable for persons younger than 12years of age or smaller than 150 cm.Periodically check all parts of the beltsystem for damage and properfunctionality.
Have damaged components replaced.
After an accident have the belts andtriggered belt tensioners replaced by aCHEVROLET retailer.
Note
Make sure that the belts are not
damaged by shoes or sharp-edgedobjects or trapped. Prevent dirtfrom getting into the belt retractors.
Belt forcelimitersIn the front seats, stress on the body isreduced by dampened release of thebelt during a collision.Belt tensioners
In the event of a head-on or rear-endcollision of a certain severity, the frontseatbelts are tightened.
41Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
45/209
Warning
Incorrect handling (e.g. removal orfitting of belts or belt buckles) cantrigger thebelt tensioners with risk ofinjury.
Deployment of the belt tensioners isindicated by illumination of controlindicator 69.
Triggered belt tensioners must bereplaced by a CHEVROLET .
Belt tensioners can only be triggeredonce.
Note
Do not affix or install accessories orother objects that may interferewith the operation of the belttensioners. Do not make anymodifications to belt tensionercomponents as this will invalidatethe vehicle type approval.
retailer
THREE-POINT SEAT BELT
Fitting
Withdraw belt from reel, guide ituntwisted across the body and engagethe latch plate in the buckle.Tension the lapbelt regularly whilst drivingbytugging the shoulderbelt.
Loose or bulky clothing prevents thebelt from fitting snugly. Do not placeobjects such as handbags or mobilephones between the belt and your body.
Warning
The belt must not rest against hard orfragile objects in the pockets of yourclothing.
42 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
46/209
Height adjustment
1. Pullbelt out slightly.2. Pressbutton.3. Adjust heightand engage.
Removing
To release belt, press redbutton on beltbuckle.
Seat belts on therear seatsThe three point seat belt for the rearcentre seat can onlybe withdrawn fromthe retractor if the backrest is in the rearposition.
Adjust the height so that the belt liesacross the shoulder. It must not lieacross the throat or upper arm.Do not adjust whiledriving.
43Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
47/209
LAP BELT
Lap belt on therear centerseatThe seatbelt for the rear center seat isconstructed as a lap belt. For adjust-ment of length press on the upper sideof the cover of the latch plate andtighten or loosen thebelt.
Using the seat belt while pregnant
Warning
The lap belt must be positioned aslow as possible across the pelvis topreventpressure on the abdomen.
AIRBAG SYSTEM
The airbag system consists of a numberof individual systems.When triggered the airbags inflatewithin milliseconds. They also deflateso quickly that it is often unnoticeableduringthe collision.
Warning
If handled improperly the airbagsystems can be triggered in anexplosive manner.
The driver should sitback as far aspossible while still maintainingcontrol of the vehicle. If you aresitting too close to the airbag, it cancause death or serious injury when itinflates.
For maximum safety protection inall types of crashes, all occupantsincluding the driver should alwayswear their seatbelts to minimize therisk of severe injury or death in theevent of a crash. Do not sit or leanunnecessarily close to the airbagwhile thevehicle is in motion.
The airbag may cause facialor bodyscratch, injurybybroken glasses orgetting a burn
by explosion
while air
bag is deployed.
44 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
48/209
Note
The airbag systems and belttensioner control electronics arelocated in the centre console area.Do notput any magnetic objects inthis area.
Do not stick anything on the airbagcovers and do not cover them withother materials.Each airbag is triggered only once.Have deployed airbags replaced bya CHEVROLET retailer.
Do not make any modifications tothe airbag system as this willinvalidate thevehicletype approval.
Having the steering wheel, theinstrument panel, all panelling parts, the door seals, the handlesand the seats removed by a CHEVROLET retailer.
When an airbag deploys there may bea loud noise and smoke. Theseconditions are normal and are notdangerous but in case it may stimulateskin of the passenger. If the stimulationis continued, contact a doctor.
Warning
Never allow children or infants andpregnant women and the old and theweak sit in the frontpassenger seatsfittedwith airbags.Furthermore, do not drive with ababy seat fitted thereon. In case of anaccident, the impact from the inflatedairbag can cause facial injury ordeath.
Caution
If the vehicle is impacted by bumpsor objects on unpaved roads orsidewalks, theairbag may inflate.Drive slowly on the surfaces notdesigned for vehicle traffic topreventunintendedair bag deployment.
Control indicator for airbag systems69.3
FRONT AIRBAG SYSTEM
The front airbag system consists of oneairbag in the steering wheel and one inthe instrument panel on the passengerside. These can be identified by theword AIRBAG.
The front airbag system is triggered inthe event of
an
accident of
a certainseverity in the depicted area. The
ignition mustbe on.
45Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
49/209
The forward movement of the front seatoccupants is retarded, thereby consider-ably reducing the risk of injury to theupperbody and head.
Warning
Optimum protection is only providedwhen the seat is in the proper position
36.
Keep the area in which the airbaginflates clear of obstructions.
Wear the seat belt properly fastened.Only then the airbag is able to protect.
3
CHILD RESTRAINTS*
CHILD RESTRAINT SYSTEMS
When a child restraint system is beingused, pay attention to the followingusage and installation instructions andalso those supplied with the childrestraint system.
Warning
Because of the airbag systems a childrestraint system must not be mountedon the front passenger seat.If the vehicle is equipped with a lapbelt on the rear centre seat, no childrestraint system is allowed on thisseat.
It is advised to mount the childrestraint system only on one of therear outer seats.
Selectingtheright systemYour child should travel facing
backwards in the vehicle, until asold as possible. It is appropriate tochange the system when the child'shead can no longer be properly
supported at eye height. The child'scervical vertebrae are still veryweak and in an accident they sufferless stress in the semi-prone rearward position than when sittingupright.
Children under 12 years or under 150cm tall should only travel in anappropriatechildsafety seat.
Never carry a child whilst traveling inthe vehicle. The child willbecometoo heavy to hold in the event of acollision. When transportingchildren, use the child restraintsystems suitable for the child'sweight.
Ensure that the child restraint system tobe installed is compatible with thevehicle type.
Ensure that the mounting location ofthe child restraint system within thevehicle is correct.
Only allow children to enter and exitthe vehicle at the side facing awayfrom the traffic.
When the child restraint system is not
46 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
50/209
in use, secure the seat with a seatbelt or removeit from the vehicle.Note
Do not stick anything on the childrestraint systems and do not coverthem with anyother materials.A child restraint system which hasbeen subjected to stress in anaccident mustbe replaced.Please ensure that infants andchildren are seated in the rear seatsusing childrestraints.Until the children can use seatbelts,please select a child restraintsuitable for its age and make surethe child wears it. Please see theinstructions on the relevant products for childrestraints.
47Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
51/209
CHILD RESTRAINT INSTALLATION LOCATIONS
Permissible options for fitting a child restraint system
Weight and age class On front passenger seat On rear outboard seats On rear centre seat
Group 0: up to 10 kg
or approx. 10 months
X U1 U2
Group 0+: up to 13 kg
or approx. 2 years
X U1 U2
Group I: 9 to 18 kg
or approx. 8 months to 4 years
X U1 U2
Group II: 15 to 25 kg
or approx. 3 to 7 years
X U U2
Group III: 22 to 36 kg
or approx. 6 to 12 years
X U U2
1 = Seat available with ISOFIX and Top-Tether mounting brackets.2 = Not allowed, if rear seat is equipped with a lap belt.U = Universal suitability in conjunction with three-point seat belt.
X = No child restraint system permitted in this weight class.
48 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
52/209
Permissible options for fitting an ISOFIX child restraint system
Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat
Group 0: up to 10 kg E ISO/R1 X IL1 X
Group 0+: up to 13 kg E ISO/R1 X IL1 X
D ISO/R2 X IL1 X
C ISO/R3 X IL1 X
Group I: 9 to 18 kg D ISO/R2 X IL1 X
C ISO/R3 X IL1 X
B ISO/F2 X IL, IUF X
B1 ISO/F2X X IL, IUF X
A ISO/F3 X IL, IUF X
IL = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.The ISOFIX restraint system must be approved for the specific vehicle type.
IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group.X = No ISOFIX child restraint system approved in this weight class.1 = Move front seat to most forward position or move forward until child restraint system does not have any interference
with front seat backrest.
49Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
53/209
ISOFIX size class and seat deviceA ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg.B ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
B1 ISO/F2X = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.C ISO/R3 = Rear-facing child restraint system for children of maximum size in the weight class up to 13 kg.D ISO/R2 = Rear-facing child restraint system for smaller children in the weight class up to 13 kg.E ISO/R1 = Rear-facing child restraint system for young children in the weight class up to 13 kg.
50 Seats, restraints
7/27/2019 owners_Manual_Cruze_3July12.pdf
54/209
ISOFIX CHILD RESTRAINTSYSTEM*
Fastenvehicle-approvedISOFIX childrestraint systems to the mountingbrackets.
ISOFIX child restraint systems canonlybemountedintherearseatrow ontheouterplaces.
When using ISOFIX mounting
bracketsforseatmounting,universally
approved child restraint systems forISOFIXmaybeused.
ISOFIX mounting brackets areindicatedbyalabelonthebackrest.
51Storage
7/27/2019 owners_Manual_Cruze_3July12.pdf
55/209
STORAGE STORAGE COMPARTMENTS
INSTRUMENT PANEL STORAGE*
Storage on top of the instrumentpanel
Pull thegrip to fold up the cover.
Storage below the light switch
Pull thegrip to open thebox.
Storage compartments .................... 51
Load compartment ......................... 53
Loading information ...................... 54
52 Storage
7/27/2019 owners_Manual_Cruze_3July12.pdf
56/209
GLOVEBOX CUPHOLDERS
To openpull thegrip.Warning
To reduce the risk of injury in anaccident or a sudden stop, alwayskeep the glovebox door closed whiledriving.
Warning
Do not place uncovered cups of hotliquid in the cup holder while thevehicle is in motion. If the hot liquidspills, youburn yourself.Such a burnto the driver could lead to loss ofcontrol of the vehicle.To reduce the risk ofpersonal injuryin the event of sudden stop orcollision, do notplace uncovered orunsecuredbottles,glasses, cans, etc.,in the cup holder while the vehicle isin motion.
Cupholders are located in the centreconsole.
Additional cupholders are located in therear armrest, when it is folded down.
53Storage
7/27/2019 owners_Manual_Cruze_3July12.pdf
57/209
SUNGLASSES STORAGE*
Fold down to open.Do not usefor storing heavy objects.
ARMREST STORAGE
Storage in the front armrest
Push lever to slide and fold up thearmrest.
LOAD COMPARTMENT
Rear Seat Fixed type
The rear seat is of a single type andfixed.
54 Storage
7/27/2019 owners_Manual_Cruze_3July12.pdf
58/209
LOADING INFORMATION
n
ment should be placed against theseatbackrests. Ensure the backrestsare securely engaged. If objects canbe stacked, the heavier objectsshouldbe placed at thebottom.Secureobjectsinload compartmenttopreventsliding.
Do not allow the load to protrudeabove the upper edge of thebackrests.
Heavyobjects in
the load compart-
n
n
Bag Hanger
On the left side in the load compart-ment is a retainer for hanging carrierbags on.
Caution
Do not hang anything heavy onto thebag hanger. It couldbe damaged.
n
n
n
n
n
compartment cover or the instrumentpanel, do not cover the sensor on topof the instrument panel.
The load must not obstruct the
operation of the pedals, parkingbrake and gear selector, or hinderthe freedom of movement of thedriver. Do not place any unsecuredobjects in the interior.
Do not drive with an open loadcompartment.
The payload is the differencebetween the permitted gross vehicle
weight (see identification plate169) and the kerb weight.
The kerb weight includes weightsfor the driver (68 kg), luggage (7kg) and all fluids (tank 90 % full).
Optional equipment and accessoriesincrease the kerb weight.
Driving with a roof load increasesthe sensitivity of the vehicle to
cross-winds and has a detrimentaleffect on vehicle handling due to thevehicles higher centre of gravity.Distribute the load evenly andsecure it properly with retaining
Do not place any objects on the load
3
55Storage
7/27/2019 owners_Manual_Cruze_3July12.pdf
59/209
straps. Adjust the tyre pressure andvehicle speed according to the loadconditions. Check and retighten thestraps frequently.
56 Storage
NOTE
7/27/2019 owners_Manual_Cruze_3July12.pdf
60/209
NOTE
INSTRUMENTS CONTROLS
57Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
61/209
INSTRUMENTSAND CONTROLS
CONTROLS
STEERING WHEELADJUSTMENT*
Unlock lever, adjust steering wheel,then engage lever and ensure it is fullylocked.
Do not adjust steering wheel unlessvehicle is stationary.
Caution
If strong impact delivers to steeringcolumn axle direction when thesteering wheel is adjustedor the leveris locked, it may cause damage to theparts related to steering wheel.
STEERING WHEEL CONTROLS*
The infotainment system can beoperated by the controls on the steeringwheel.
Further information in the infotainmentsystem section.
Controls .......................................... 57
Windscreen wiper/washer .............. 58
Outside temperature ....................... 60
Clock .............................................. 61
Power outlets .................................. 61
Cigarette lighter ............................. 61
Ashtrays ......................................... 62
Warning lights, gauges and
indicators......................................... 63
Information displays ...................... 72
Vehicles messages .......................... 73
Trip computer ................................. 75
Vehicle personalisation .................. 76
58 Instruments and controls
WASHER AND WIPER
7/27/2019 owners_Manual_Cruze_3July12.pdf
62/209
HORN
Press .
Adjustable wiper interval
Wiper lever in position .
Turn the adjuster wheel to adjust thedesired wipe interval :
Short = Turn adjuster wheelinterval downwards
Long = Turn adjuster wheelinterval upwards
WINDSCREEN WIPERS
=
=
=
=
For a single swipe when the windscreen
wipers are off, press the lever up.Do not use if the windscreen is frozen.Switch off in car washes.
Off
Timed interval wiping orautomatic wiping with rainsensor*
Slow
Fast
WASHER AND WIPER
SYSTEM
59Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
63/209
Adjustable wiping with rain sensor*
= Automatic wiping with rain
sensor
The rain sensor detects the amount ofwater on the windscreen and automati-cally regulates the frequency of thewindscreen wiper.
Adjustable sensitivity of the rainsensor*
Turn theadjusterwheel toadjust thesensitivity:
Low = Turnadjusterwheelsensitivity upwardsHigh = Turnadjusterwheelsensitivity downwards
Caution
Switchoffthewindscreenwiper andautomaticoperationwithrain sensorincarwashes.
Keepthesensorfreefromdust, dirt andice.
Ifyoumovethewipertorainsensormodeorturntheadjusterwheelfromlowsensitivitytohighsensitivitywhenthe ignition is switched on, thewindscreen wipers operate once tocheckthesystem.
OUTSIDE TEMPERATURE
60 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
64/209
WINDSCREEN WASHER
Pulllever. Washerfluidissprayed ontothewindscreenand thewiper swipesforafewstrokes.
Caution
Lessthanclearvisionforthedriver
canleadtoanaccidentresultinginpersonalinjuryanddamageto yourvehicleorotherproperty.
Do not operate the windscreenwiperswhenthewindscreenisdry orobstructed, as with snow or ice.Using thewiperson anobstructedwindscreen can damage the wiperblades, wipermotor,andglass.
Check blades are not frozen towindowsbefore operating in coldweather. Wiperoperationwhile bladeisfrozencandamagewiper motor.
Do not operate the windscreenwashercontinuously formore thansomeseconds, orwhen the washerfluidtankisempty. This cancausethewashermotorto overheatresultingincostly repairs.
OUTSIDE TEMPERATURE
A drop in temperature is indicatedimmediatelyandariseintemperatureafteratimedelay.
Warning
Theroadsurfacemayalreadybe icyeventhoughthedisplay indicatesafewdegreesabove 0C.
CLOCK POWER OUTLETS CIGARETTE LIGHTER
61Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
65/209
CLOCK
Date and time are shown in the InfoDisplay.
Set date and time
Press the CONFIGbutton. The menuSettings is displayed.
Select Time & Date Settings.
Vehicle personalisation 76.
Settings for time and date can beadjusted.
See infotainment manual for furtherinformation.
POWER OUTLETS
12V power outlets are located in thefront and rear floor console.Do not exceed the maximum powerconsumption of 120 watts.With ignition off the power outlets aredeactivated. Additionally the poweroutlets are deactivated in case of lowbattery voltage.
Do not connect any current deliveringaccessories, e.g. electrical chargingdevices orbatteries.Do not damage the sockets by usingunsuitableplugs.
CIGARETTE LIGHTER
The cigarette lighter is located in thefront floor console.Press in cigarette lighter. Switches offautomatically once the element isglowing. Pull out lighter.
Time & Date Settings
18/04/2008
ASHTRAYS
62 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
66/209
Warning
If you leave the vehicle with aninflammable explosive substance,such as a disposable lighter, insidethe car in summer, it can explode andcause fire due to an increase oftemperature in the passengercompartment and the boot. Pleaseensurethatno inflammableexplosive
substances are left or kept inside thecar.
Caution
Overheating the cigarette lighter candamage the heating element and thelighter itself.
Do not hold the lighter in while it isheating. This can cause the lighter tooverheat.
Caution
The barrel of an operating cigarettelighter canbecome very hot.Do not touch the barrel of thecigarette lighter and do not allowchildren to operate or play with thecigarette lighter.
This hot metal can cause personalinjuries and damage to your vehicleor otherproperty.
Caution
The cigarette socket should only beused with the cigarette lighter.If other 12 V power adapters areinstalled into the cigarette socket,fuse failure or a potential thermalincident may occur. The 12 V poweroutlet located at the rear of theconsole should be used when powering aftermarket devices suchas navigation systems or phonechargers.
Caution
To be used only for ash and not forcombustiblerubbish.
Ashtray in the front console under theheating and ventilation controls or ascontainer for mobileuse in the car.Open cover to use.
WARNING LIGHTS, GAUGES
63Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
67/209
,AND INDICATORSSPEEDOMETER
Indicates vehicle speed.
ODOMETER
The bottom line displays the recordeddistance.
TRIP ODOMETER
The top line displays the recorded distance
since the last reset (max. value 1999.9).When the recorded distance reaches1999.9, trip odometer automatically shows0 without resetting.
To reset, press the SET/CLR button orhold the reset knob depressed for a fewsecondswith the ignition on.
64 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
68/209
34
5
6
2
1
0
TACHOMETER
Displays the engine revolutionsperminute.
Driveinalowenginespeedrangeforeachgearasmuchaspossible.
Caution
Iftheneedleisinthewarning zone,the maximum permitted enginespeedisexceeded. Engine atrisk.
FUEL GAUGE
Displays the fuel level in the tank.
Control indicator illuminates if thelevel in the tank is low. Refuelimmediately.
Never run the tank dry.
Because of the fuel remaining in thetank, the top-up quantity may be lessthan the specified tank capacity.
Note
Before refuelling, make sure thatthe ignition is switched off.
If you operate the ignition switchwhilst refuelling, the needle of thefuel gauge may not indicate theproper fuel level.
On inclines the needle on the fuelgauge may not indicate the properfuel level due to movements of thefuel in the fuel tank.
65Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
69/209
ENGINE COOLANTTEMPERATURE GAUGE
Displays the coolant temperature
Leftarea (C) = Engineoperatingtemperaturenot yetreached
Central = Normal operatingarea temperatureRight area (H)= Temperature too high
Caution
If engine coolant temperature is toohigh, stop vehicle, switch off engine.Danger to engine. Check coolantlevel.
SERVICE DISPLAY
Engine oil life system for diesel
engines(not available on all versions orengines)
When to change engine oil
This vehicle may have a computer systemthat indicates when to change the engineoil and filter. This is based on enginerevolutions and engine temperature, andnot on mileage.
Based on driving conditions, themileage at which an oil change isindicated can vary considerably.
For the oil life system to work properly,the system must be reset every time theoil is changed. When the system hascalculated that oil life has beendiminished, it indicates that an oilchange is necessary. Code 82appearsin the Driver Information Center.Change the oil as soon as possiblewithin the next 1000 kms.
It is possible that, if driving under the
best conditions, the oil life systemmight indicate that an oil change is notnecessary for up to a year. The engineoil and filter must be changed at leastonce a year and, at this time, the systemmust be reset. Your
has trained service people whocan perform this work and reset thesystem.
It is also important to check the oil
regularly over the course of an oil draininterval and keep it at the proper level.If the system is ever reset accidentally,the oil must be changed at 15000 kms /1year since the last oil change.Remember to reset the oil life systemwhenever the oil is changed.
CHEVROLETretailer
66 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
70/209
The remaining engine oil life durationis displayed in the Driver InformationCenter by the control indicator ,followed by a percent value whichshows the remaining engine oil life. Forthis purpose the ignition has to beswitched on without engine running.
Driver Information Center 72.
Service Information 163.
Display of remaining engine oil life How to reset the engine oil life system
Reset the system whenever the engineoil is changed so that the system can
calculate the next engine oil change. Toreset the engine oil life system, do oneof the following:
Using a scan tool:Your willreset the system using this tool afterchanging the engine oil.
Using accelerator pedal:
Remove key from ignition switchor with Start/Stop system switchoff ignition for more than oneminute.
Insert key in ignition switch andturn key to position 2 or withStart/Stop system switch onignition (ignition on but withengine off).
Fully press the accelerator pedaland hold for two seconds. Release the accelerator pedal for
two seconds.
n
CHEVROLET retailer
n
Repeat pressing and releasing ofthe accelerator pedal as describedabove two times within one
minute.
Using the SET/CLR button onvehicles with Midlevel-Display:
Press the MENUbutton on the turnsignal lever to select the VehicleInformation Menu. Turn theadjuster wheel until the menu withthe remaining engine oil lifeduration is displayed. Press SET/
CLRbutton for a few seconds withignition on. If Code 82 still appearsin the Driver Information Centerafter the vehicle has been started,the engine oil life system has notbeen reset. Repeat the procedure.
Using the reset knob on vehicleswith Baselevel-Display*:
n
n
67Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
71/209
Press reset knob for about 5 secondsuntil the remaining engine oil life isdisplayed. Release the reset knob andpress again for a few seconds to resetthe engine oil life system.
CONTROL INDICATORS
The control indicatorsdescribed are notpresent
in
all vehicles. The descriptionapplies to all instrument versions.
When the ignition is switched on, mostcontrol indicators will illuminatebriefly as a functionality test.
Thecontrol indicatorcolours mean:
Red = Danger , importantreminder
Yellow = Warning, information, fault
Green = Confirmationof activationBlue = Confirmation of activationWhite = Confirmation of activation
68 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
72/209
CONTROL INDICATORS IN THE INSTRUMENT
69Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
73/209
TURN SIGNAL
illuminates or flashes green.
Flashes
The control indicator flashes if a turnsignal or the hazard warning flashersare activated.
Fast flashing: failure of a turn signallight or associated fuse.
Bulb replacement 118. Fuses 124.
Turn signals 80.
SEAT BELT REMINDER
for driver's seat illuminates or flashesred.
Illuminates
4 seconds after ignition is switched on,100 seconds after starting the engine orafter reaching a specific distancerespectively speed until the seat belt isfastened.
Flashes
For 100 seconds after starting theengine or reaching a specific distancerespectively speed until the seat belt isfastened.
Fastening the seat belt 40.
AIRBAG AND BELTTENSIONERS
illuminates red.
When the ignition is switched on, thecontrol indicator illuminates for about 4seconds. If it does not illuminate, doesnot go out after 4 seconds or illuminateswhilst driving, there is a fault in the belttensioner or in the airbag system. Thesystems may fail to trigger in the eventof an accident.
Deployment of the belt tensioners orairbags is indicated by continuousillumination of .
Warning
Have the cause of the fault eliminatedimmediately by a CHEVROLET
retailer
Airbag system, belt tensioners 43,40.
3
CHARGING SYSTEM
illuminates orflashes red.
It illuminates when the ignition isswitchedonandgoesoutshortlyaftertheenginestarts.
Illuminates when the engine isrunning
Stop,switchoffengine. Batteryisnotcharging. Engine cooling may beinterrupted. Indieselengines, power tothebrakeservounitmaybecut. Seekthe assistance of a
.Flashes
Whenkeyisinposition1formore than15 seconds, the control indicatorflashes and vehicle enters batterysaving mode.
MALFUNCTION INDICATORLIGHT
illuminates or flashes yellow.
It illuminates when the ignition isswitched on and goes out shortly afterthe engine starts.
CHEVROLET
retailer
70 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
74/209
SERVICE VEHICLE SOON
illuminatesyellowwhenthe vehicleneedsaservice.
It illuminates in combination with awarning code.
Vehicle messages 73.
BRAKE AND CLUTCH SYSTEM
illuminates red.
Illuminates when the parking brake isreleased if the brake/clutch fluid level istoo low or if there is a brake system fault
116.3
Warning
If the brake system warning lampilluminates, check the brake fluid leveland contact a CHEVROLET retailerimmediately.
If thebrake fluid level in the reservoir islow, do not drivethe vehicle.This may mean your brakes are notworking properly. Driving withmalfunctioning brakes can causepersonal injuries and damage to yourvehicle and otherproperty.
Illuminates after the ignition is switchedon if the manual parking brake is applied
103.
ANTILOCK BRAKE SYSTEM(ABS)
illuminates yellow.
Illuminates for a few seconds after theignition is switched on. The system isready for operation when the controlindicator goes out.
If the control indicator does not go outafter a few seconds, or if it illuminates
while driving, there is a fault in the ABS.The brake system remains operationalbut without ABS regulation.
Antilock brake system 102.
ULTRASONICPARKINGASSIST*
illuminates yellow.
Fault in system
or
Fault due to sensors that are dirty orcovered by ice or snow
or
r
Interference due to external sources ofultra sound. Once the source ofinterference is removed, the system will
operate normally.Have the cause of the fault in the systemremedied by a CHEVROLET retailer.
Ultrasonic parking sensors 105.
PREHEATING
illuminates yellow.
Illuminates when preheating is activated.Only activates when outside temperatureis low.
ENGINE OIL PRESSURE
illuminates red.
It illuminates when the ignition isswitched on and goes out shortly afterthe engine starts.
71Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
75/209
ILLUMINATES WHEN THEENGINE IS RUNNING
Caution
Engine lubrication may be inter-rupted. This may result in damage tothe engineand/or locking of the drivewheels.
1. Manual transmission: depressclutch.
2. Select neutral gear, automatictransmission: set selector lever toN.
3. Move out of the flow of traffic asquickly as poss ib le withoutimpeding other vehicles.
4. Switch off ignition.Warning
When the engine is off, considerablymore force is needed to brake and steer.Do not remove key until vehicle hascome to a standstill, otherwise thesteering column lock could engageunexpectedly.
Check oil level before seekingassistance of a CHEVROLET retailer
113.
LOW FUELilluminates yellow.
Illuminates when level in fuel tank istoo low.
Catalytic converter 98.
Bleeding the diesel fuel system 117.
IMMOBILISER
flashes yellow.
If the indicator continues illuminatingor flashing when the ignition is on,there is a fault in the system. The enginecannotbe started.APPLY FOOTBRAKE
flashes yellow.
Flashes when brake or clutch pedalneeds to be depressed to start vehicleswith electronic key system 19.
EXTERIOR LIGHTilluminates green.
Illuminated when the exterior lights areon 79.
HIGH BEAM
illuminates blue.
Illuminated when high beam is on and
during headlight flash 79.
FOG LIGHT
illuminates green.
Illuminated when the front fog lightsare on 81.
RAIN SENSOR*
illuminates green.
Illuminated when automatic rain sensor
is activated 59.CRUISE CONTROL*
illuminates white or green.
Illuminated when the system is on103.
DOOR OPEN
illuminates red.
It illuminates when a door or thetailgate is open.
3
INFORMATION DISPLAYS
72 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
76/209
DRIVER INFORMATIONCENTER
TheDriverInformationCenter(DIC) islocated in the instrumentcluster andavailable as Baselevel - Display orMidlevel - Display.
Selectingfunctions
The menus and functions can beselectedby thebuttons on the turnsignallever.
Press the MENUbutton to switch
betweenthemenusortoreturnfrom asubmenutothenexthighermenu level.
TheMENUbuttonwillbelockedwhenvehiclespeedisabove0km/hortheshiftleverisNOTinposition P.
Thefollowingmenuscanbeselected:
n VehicleInformationMenu
n Trip/FuelInformationMenu
Turntheadjusterwheeltomark amenuoptionortosetanumeric value.
PresstheSET/CLRbuttontoselect afunctionortoconfirmamessage.
Vehicle personalisation 76.
Trip computer 75.
GRAPHIC-INFO-DISPLAY
DependingontheInfotainment system,theGraphic-Info-Display is availableintwoversions.
73Instruments and controls
VEHICLE MESSAGES
7/27/2019 owners_Manual_Cruze_3July12.pdf
77/209
Displayof time, outside temperature,dateorinfotainmentsystem (whenit ison) andsettingsforvehicle personali-
sation.Selectingfunctions
Functionsandsettingsareaccessed viathedisplay.
Selectionsaremadevia:
n Menus
n Functionbuttonsandmultifunctionknoboftheinfotainmentsystem
Selecting with the infotainmentsystem
Selectmenuitemsviathemenusandusingtheinfotainmentsystem buttons.The multifunction knob is used toselectanitemandconfirm.
Toexitamenu,pressBACK.
Messages are given via the DriverInformation Center (DIC), the Info-Display or as warning and signal
buzzers. Confirm warning messageswiththemultifunctionknob.
Thevehicleorenginemaybe seriouslydamagedifyoukeepdriving whileavehiclemessageintheDICis comingon. Contact a CHEVROLET retailerimmediately.
74 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
78/209
The vehicle messages are displayed ascodenumbers.
No. Vehicle message
2 Noradioremotecontrol detected,depressclutchpedal forarestart
5 Steeringcolumnislocked
7 Turnsteeringwheel, switch ignitionoffandthenon
9 Turnsteeringwheel, start engineagain
25 Leftfrontturnindicatorfailure26 Leftrearturnindicatorfailure
27 Rightfrontturnindicatorfailure
28 Rightrearturnindicatorfailure
35 Replacebattery in radio remotecontrol
54 Waterindieselfuelfilter
65 Theft attempt
67 Service steering columnlock75 Service air conditioner79 Top up engineoil 113
No. Vehicle message
81 Service transmission
134 Park assist fault, clean bumper
136 Service parking assist
82 Changeengineoilsoon
84 Enginepower is reduced91 No remote detected, change location
of the electronic key or use thesocket locatedin the centre console
92 No remote detected, press brake torestart
94 Shift to park95 Service airbag
WARNING CHIMES
When starting the engine or whilstdriving
n
n If a certain speed is exceeded withparkingbrake applied.If a warning code appears in theDriver Information Center.If the parking assist detects anobject.
When the vehicle is parked and/or adoor is opened
Until the engine starts with the keyin the ignition switch.With exterior lightson.
If seatbelt is not fastened.
n
n
n
n
TRIP COMPUTER*
75Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
79/209
The menus and functions can beselectedby thebuttons on the turnsignallever.
PresstheMENUbuttontoselecttheTrip/FuelInformationMenu.
Turntheadjusterwheeltoselectone ofthesubmenus:n Tripcomputern Averageconsumptionn Rangen Averagespeedn Instantaneousconsumption
Toreset,presstheresetknobor pressthe SET/CLR button for a fewseconds.
Averageconsumption
Displayofaverageconsumption. Themeasurementcanberesetatany time.
Toreset,presstheSET/CLRbutton forafewseconds.
RangeRangeiscalculatedfromcurrentfueltankcontentandcurrent consumption.Thedisplayshows averagevalues.
After refuelling, the range is updatedautomatically after a brief delay.
When the fuel level in the tank is low, a
message appears in the Driver Infor-mation Center.
Additionally the control indicator inthe fuel gauge illuminates.
Average speed
Display of average speed. The meas-urement can be reset at any time.
To reset, press the SET/CLRbutton fora few seconds.
Instantaneous consumption
Display of the instantaneous consump-tion. At low speeds, consumption perhour is displayed.
Caution
Theinstantaneous and average consu-mption can vary according to thedriving conditions, driving pattern or
vehiclespeed.
VEHICLE PERSONALISATION*
76 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
80/209
The vehicle's parameters can bepersonalisedbychangingthesettingsintheDriverInformationCenterand in
theInfo-Display.Dependingonvehicleequipment someofthefunctionsdescribed belowmightnotbeavailable.
Settings in the Driver InformationCenter
TheUnitsettingscanbeselectedby thebuttonsontheturnsignallever.
TheUnitsettingsmenuisdisplayed.
Displayedunitscanbechanged.
PresstheSET/CLRbuttonandturn theadjusterwheeltoselectoneofthe units.
n Unit1:GreatBritain
n Unit2:UnitedStates
n
Unit3:EuropePresstheSET/CLRbuttontoconfirm.
PresstheMENUbuttontoselectthemenuUnit.
Settings in the Info-Display
Whenaudioisswitchedon,presstheCONFIGbutton. ThemenuSettings isdisplayed.
77Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
81/209
The following settings can be selectedby the MENUbutton:
Languages
Radio settings
Vehicle settings
In the corresponding submenus the
following settings can be changed:
n
n Time and Date settings
n
n
Languages
Selection of the desired language.
Time and Date settings
See Clock 61 and Infotainmentmanual for further information.
Radio settings
See Infotainment manual for furtherinformation.
Vehicle settings
n
Auto fan speed: Modifies the fanspeed high medium / low.Auto rear defog: On/Off (activateor deactivateauto rear defog).
n Comfort and convenienceChime volume: Change thevolume of warning chimes.
n Collision/detection systemsPark assist: Activate or deactivatethe ultrasonic sensors.
Climate and airquality
78 Instruments and controls
7/27/2019 owners_Manual_Cruze_3July12.pdf
82/209
n
Exit lighting :
Activate or deactivate and changethe duration of exit lighting.
n Powerdoor locks
Unlocked door anti lock out :On/Off (activate or deactivate thedoor knob to unlock automaticallyeven when pressed manually withdoor open.)
Auto door lock: Activate ordeactivate the automatic doorlocking function.Auto door unlock: Change theconfiguration to unlock only thedriver's door or all doors whilstunlocking.
Delayed door lock : On/Off (withcentral locking button pressed for 3seconds with door open, activate ordeactivate the automatic door
locking in 5 seconds after closingthe door.)
Lighting nstarting
Remote unlock light feedback :
On/Off (activate or deactivate thehazard warning light feedbackwhilst unlocking central lock withremote key.)
Remote lock feedback: Activateor deactivate the hazard warninglight or horn or both feedbackwhilst locking.Remote door unlock : Change theconfiguration to unlock only thedriver's door or all the doors whilstunlocking.
Passive entry unlock : Change theconfiguration to unlock the driversdoor or all the door's while pullingthe outer door handle.
Remote left in vehicle reminder :On/Off (activate or deactivate thereminder system (horn beep's)
when the remote key is left in thevehicle.)
Remote locking, unlocking, Return to factory settings :Yes/No (resets all the settings tofactory settings.)
LIGHT SWITCH
LIGHTING EXTERIOR LIGHTING
79Lighting
HIGH BEAM
7/27/2019 owners_Manual_Cruze_3July12.pdf
83/209
To turn the head, tail and parking lampson or off, rotate the knob clockwise andcounter clockwise.The knob has three positions whichactivate various lamp functions asfollows :Turn light switch :
= Lights off.= Position lights.
= Headlights
Control Indicator 71.
LIGHT SWITCH
Exterior Lighting ............................ 79
Interior Lighting ............................. 82Lighting Features ........................... 83
HIGH BEAM
Toswitchfromlowtohighbeam, pushlever.
To switch to lowbeam, push leveragainorpull.
Warning
Always switch the high beamheadlamps to lowbeam when youapproachoncomingvehiclesor when
other vehicles ahead.