Upload
trandat
View
216
Download
0
Embed Size (px)
Citation preview
3
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders ..................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
5
Staudigel
®
Ideen für Akustik und Design
New development
The ALPHA AKUSTIK panel is a Staudigel development. It was conceived with the objective to develop sound absorbers that are mechanically resilient while having with two identical-looking faces.
Contrary to the other products available on the market, the ALPHA AKUSTIK panel is characterized by its sandwich construction with internal acoustic fleece.
Being located inside the panel, the fleece is protected from mechanical damage.
This construction is suitable for all our panel types, whether the face pattern has holes or slats.
The product is ideal for closet doors and for partitions of 17 and 20 mm thickness. It offers an excellent price/performance ratio.
We support planners and builders
To help planners and builders, we prepared some documentation material on how to install ALPHA AKUSTIK panels in an economically efficient manner.
We wanted to make sure that you achieve a technically sound, flexible installation with a minimum of parts.
It is our desire to offer technically faultless and visually attractive solutions to the satisfaction of our customers.
ALPHA AKUSTIK - Ideas for Acoustics and Design
6
Staudigel
®
Ideen für Akustik und Design
Planning and Support Services by the Manufacturer
For special jobs, benefit from our know-how in the field of sound absorption! From planning over measurement to expert’s reports: Rely on our extensive experience gathered from a great variety of projects to receive premium quality. Your project will advance quickly thanks to our professional services with their convincing price/performance ratio.
Our scope of services:
• Project planning and design of sound-absorbing systems• Measurement of reverberation period acc. to DIN EN ISO 3382:2006 • Measurement of airborne sound insulation between rooms in buildings acc. to ISO 140 - part 3 • Measurement of impact sound insulation of ceilings in buildings acc. to ISO 140 - part 7 • Measurement of sound absorption in the reverberation chamber acc. to DIN EN ISO 354 • Determination of sound insulation acc. to DIN EN ISO 140, part 3 • Expert’s reports on room and building acoustics under consideration of the applicable standards and guideline, e.g. : • DIN 18041 – Speech intelligibility in small to medium-sized rooms • VDI 2569 – Sound protection and acoustic design in the office • DIN EN 12354-6 – Calculation of the acoustic characteristics of a building on the basis of the properties of its components • DIN EN ISO 140, part 7 – Measurement of insulation of impact sound of ceilings in buildings • DIN EN ISO 140, part 4 – Measurement of insulation of airborne sound
Just contact us – we will be happy to advise!
7
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ....................... 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
9
Staudigel
®
Ideen für Akustik und Design
Caution: Dimensional changes may occur with some panel materials Wood absorbs and releases moisture in dependence on the moisture content of the ambient air. This is particularly true for acoustic panels as the surface of the material is greatly increased by bore holes and grooves.For this reason, the material supplied by us should be acclimatised sufficiently.
Dimensional changes of MDF panels B2 according to factory specification
Dimensional stability Length/Moisture 35 - 85% width 0.5% thickness 7.0%Moisture on delivery between 5.0 and 9.0%
Dimensional changes of MDF panels B1, flame retardant, according to factory specification
Dimensional stability Length/Moisture 35 - 85% width 0.5% thickness 7.0%Moisture on delivery between 5.0 and 9.0%
Dimensional changes of Sasmox panels A2, non-flammable, according to factory specification
Dimensional stability Length/Moisture 35 - 85% width 0.2% thickness 0.2%Moisture on delivery between 2.0 and 3.0%
Important instructions for installation!The wall and ceiling panels delivered by the manufacturer may only be mounted if the following conditions are met:
• the respective walls in the building have fully dried,• sufficient air space has been provided behind the panels,• the substructure allows for mounting the panels in a distance of approx. 500 mm, and• the substructure and the expansion joints are in accordance with the materials’ shrinking and swelling behaviour.
For a panel length of 2,000 mm, we recommend a joint of no less than 5 mm!
If you disregard the above aspects when mounting the panels, warping and possibly damage to the panels may occur. This will not be covered by the manufacturer’s warranty!
11
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ................. 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
13
Staudigel
®
Ideen für Akustik und Design
What are the benefits of sound-absorption systems?
Contemporary architecture uses many reverberative materials, for example stone, concrete, glass, and aluminum.
To achieve agreeable room acoustics, it is therefore necessary to install sound absorbers.
Besides meeting all technical requirements, sound-absorbing systems must leave leeway for architectural design.
The ALPHA AKUSTIK element comes up to this double function as a provider of good room acoustics and a design feature.
The product developed by Staudigel can be used as ceiling or wall paneling or as furniture doorsets. It is available on a per-order basis with veneer, printed veneer or painted surface.
Information about our sound absorption system
• Enhanced room acoustics
• Noise reduction through sound insulation in the room
• Modular acoustic system for an almost unlimited range of sound absorption options
• The ideal product for every application
• High-quality product for interior fittings
• Pre-finished parts available on request
Board material:
• MDF natural-colored, black, or painted
• MDF B1
• Melamine-coated MDF
• Chipboard
• Chipboard B1
• Melamine-coated chipboard
• Sasmox A2
• Multiplex
• OSB boards
14
Staudigel
®
Ideen für Akustik und Design
Product characteristics
• Manufactured on per-order basis
• Largest available dimension 3600 x 1500 mm for panels with holes, 3600 x 1400 mm
for panels with slats
• Optional hole diameter
• Distance between the holes fixed along the length (8/16/32/64)
• Distance between the holes variable along the width
• With or without margin; margin width variable
• Grooves (slats) can also be machined at right angle
• Edges available in veneer or ABS edgebanding, 0.6 - 3 mm
• Solid wood edgebanding available on request
• Closet doors with hinge and lock bore holes
• Molded parts available on request
• Veneer- or melamine-coated panels with tongue-and-groove,
standard dimension 3050 x 192 x 17/18 mm, other dimensions available on request
Surfaces
• DD or UV paint, porous or non-porous
• Stained according to color sample
• Surfaces painted in RAL or NCS colors
• Melamine HPL or CPL surfaces available on request
Veneers
• All commercially available veneers
• Exotic woods available on request
• Veneers on a per-customer and per-order basis, with or without sequence, book matched
or slip matched
• Standard veneers like beech, maple, Canadian maple, oak, ash, birch as selected by us,
or according to colour sample
• Sliced veneers as stripes or with flower
• Rotary cut veneers (e.g. birch)
• Standard veneer thickness 0.6 mm - softwood 0.8 mm
• Back covered in backing foil or cut veneer at our option
Staudigel 2010 - Seite 15
Staudigel
®
Ideen für Akustik und Design
Wood is a natural material.
No two trees are identical in colour and structure, and there are even differences within one tree trunk. These natural differences emphasise the authenticity, beauty and expressiveness of grown wood. Every type of wood, primarily unstained wood, will change its colour.
Acoustic fleece
• Black Soundtex WB, version A2
• Other colours available on request
Delivery periods
• Fast delivery - please contact us for current delivery times
Tests
• Reports on sound absorption tests are available on request
Samples
• A4 sample of your desired product available on request
References
For more information, please visit www.staudigel.de or www. alpha-akustik.de
17
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern ........................... 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
Stand: März 2010
6,2 % offene Fläche316360 Löcher / m2
Schnitt A
Lochplatte NANO-LITE 0,5 G
A
A
0,5
Ø 0,5
19
Akustikvlies
1,8
1,8
per
fori
erte
Trä
ger
pla
tte
19
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
Stand: März 2010
2,7 % offene Fläche136360 Löcher / m2
Schnitt A
per
fori
erte
Trä
ger
pla
tte
Lochplatte NANO-LITE 0,5 D
A
A
0,5
Ø 0,5
19
Akustikvlies
3,8
3,8
20
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
Stand: März 2010
6,0 % offene Fläche136360 Löcher / m2
Schnitt A
per
fori
erte
Trä
ger
pla
tte
Lochplatte NANO-LITE 0,75 D
A
A
0,5
Ø 0,75
19
Akustikvlies
3,8
3,8
21
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
Stand: März 2010
12,4 % offene Fläche158230 Löcher / m2
Schnitt A
per
fori
erte
Trä
ger
pla
tte
Lochplatte NANO-LITE 1,0 D
A
A
0,5
Ø 1,0
19
Akustikvlies
3,6
3,6
22
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
Stand: März 2010
17,9 % offene Fläche158230 Löcher / m2
Schnitt A
per
fori
erte
Trä
ger
pla
tte
Lochplatte NANO-LITE 1,2 D
A
A
0,5
Ø 1,2
19
Akustikvlies
3,6
3,6
23
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
25
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
2,1 % offene Fläche
Mikroperforierung Typ 8/8/5 - 1,2
88
888
8
Ø1,2
Ø5
Akustikvlies
26
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
11 % offene Fläche
Lochplatte Typ 8/8/5 - 3
88
88
8Ø 3
AkustikvliesØ 5
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
44,2 % offene Fläche
Lochplatte Typ 10,66/10,66/8 - 8
Akustikvlies
10,67
10,6
7
Ø 8
Ø 8
27
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
11 % offene Fläche
Lochplatte Typ 8/8/5 - 3
8
8
88
8
Ø 3
AkustikvliesØ 5
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
44,2 % offene Fläche
Lochplatte Typ 10,66/10,66/8 - 8
Akustikvlies
10,67
10,6
7
Ø 8
Ø 8
28
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
5,4 % offene Fläche
Akustikvlies
Lochplatte Typ 16/8/10 V - 3
16 16 16
1616
16
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
15,1 % offene Fläche
Lochplatte Typ 16/8/10 V - 5
Akustikvlies16 16 16
1616
16
Ø10
Ø5
29
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
5,4 % offene Fläche
Akustikvlies
Lochplatte Typ 16/8/10 V - 3
16 16 16
1616
16
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
15,1 % offene Fläche
Lochplatte Typ 16/8/10 V - 5
Akustikvlies16 16 16
1616
16
Ø10
Ø5
30
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
39,25 % offene Fläche
Lochplatte Typ 16/8/10 V - 8
AkustikvliesØ10 161616
Ø8
1616
16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,8 % offene Fläche
Lochplatte Typ 16/16/10 - 3
Akustikvlies16 16 16
1616
16
Ø10
Ø3
31
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
39,25 % offene Fläche
Lochplatte Typ 16/8/10 V - 8
AkustikvliesØ10 161616
Ø8
1616
16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,8 % offene Fläche
Lochplatte Typ 16/16/10 - 3
Akustikvlies16 16 16
1616
16
Ø10
Ø3
32
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 16/16/10 - 5
Akustikvlies
Ø5
1616Ø10 16
1616
16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6 % offene Fläche
Lochplatte Typ 16/16/8 - 8
Akustikvlies
1616
16
161616Ø 8
33
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 16/16/10 - 5
Akustikvlies
Ø5
1616Ø10 16
1616
16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6 % offene Fläche
Lochplatte Typ 16/16/8 - 8
Akustikvlies
1616
16
161616Ø 8
34
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6 % offene Fläche
Lochplatte Typ 16/16/10 - 8
Akustikvlies16 16 16
1616
16
Ø10
Ø8
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
30,7 % offene Fläche
Lochplatte Typ 16/16/10 - 10
Akustikvlies16 16 16
1616
16
Ø10
35
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6 % offene Fläche
Lochplatte Typ 16/16/10 - 8
Akustikvlies16 16 16
1616
16
Ø10
Ø8
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
30,7 % offene Fläche
Lochplatte Typ 16/16/10 - 10
Akustikvlies16 16 16
1616
16
Ø10
36
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,7 % offene Fläche
Lochplatte Typ 16/16/10 V - 3
Akustikvlies32
1616
16
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 16/16/5 V - 5
Akustikvlies
1616
1616
Ø5
37
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,7 % offene Fläche
Lochplatte Typ 16/16/10 V - 3
Akustikvlies32
1616
16
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 16/16/5 V - 5
Akustikvlies
1616
1616
Ø5
38
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,6 % offene Fläche
Lochplatte Typ 16/16/10 V - 5
Akustikvlies32
1616
16
Ø10
Ø5
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,4 % offene Fläche
Lochplatte Typ 16/16/10 V - 8
Akustikvlies32
1616
16
Ø10
Ø8
39
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,6 % offene Fläche
Lochplatte Typ 16/16/10 V - 5
Akustikvlies32
1616
16
Ø10
Ø5
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,4 % offene Fläche
Lochplatte Typ 16/16/10 V - 8
Akustikvlies32
1616
16
Ø10
Ø8
40
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
30,3 % offene Fläche
Lochplatte Typ 16/16/10 V - 10
Akustikvlies32
1616
16
Ø10
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
11 % offene Fläche
Lochplatte Typ 21,33/21,33/8 - 8
Akustikvlies21,33Ø 8
21,3
3Ø
8
41
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
30,3 % offene Fläche
Lochplatte Typ 16/16/10 V - 10
Akustikvlies32
1616
16
Ø10
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
11 % offene Fläche
Lochplatte Typ 21,33/21,33/8 - 8
Akustikvlies21,33Ø 8
21,3
3Ø
8
42
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
1,4 % offene Fläche
Lochplatte Typ 32/16/10 V - 3
Akustikvlies
32
Ø3
Ø10
3232
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
3,8 % offene Fläche
Lochplatte Typ 32/16/10 V - 5
Akustikvlies
32
Ø5
Ø10
3232
43
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
1,4 % offene Fläche
Lochplatte Typ 32/16/10 V - 3
Akustikvlies
32
Ø3
Ø10
3232
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
3,8 % offene Fläche
Lochplatte Typ 32/16/10 V - 5
Akustikvlies
32
Ø5
Ø10
3232
44
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
9,7 % offene Fläche
Lochplatte Typ 32/16/10 V - 8
Akustikvlies
32
Ø8
Ø10
3232
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
15,1 % offene Fläche
Lochplatte Typ 32/16/10 V - 10
Akustikvlies32
3232
Ø10
45
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
9,7 % offene Fläche
Lochplatte Typ 32/16/10 V - 8
Akustikvlies
32
Ø8
Ø10
3232
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
15,1 % offene Fläche
Lochplatte Typ 32/16/10 V - 10
Akustikvlies32
3232
Ø10
46
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
0,7 % offene Fläche
Lochplatte Typ 32/32/10 - 3
Akustikvlies32
32
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
1,9 % offene Fläche
Lochplatte Typ 32/32/10 - 5
Akustikvlies32
3232
Ø10
Ø5
47
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
0,7 % offene Fläche
Lochplatte Typ 32/32/10 - 3
Akustikvlies32
32
Ø10
Ø3
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
1,9 % offene Fläche
Lochplatte Typ 32/32/10 - 5
Akustikvlies32
3232
Ø10
Ø5
48
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
4,9 % offene Fläche
Lochplatte Typ 32/32/10 - 8
Akustikvlies32
3232
Ø10
Ø8
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 32/32/10 - 10
Akustikvlies32
3232
Ø10
49
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
4,9 % offene Fläche
Lochplatte Typ 32/32/10 - 8
Akustikvlies32
3232
Ø10
Ø8
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7 % offene Fläche
Lochplatte Typ 32/32/10 - 10
Akustikvlies32
3232
Ø10
51
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern ............................. 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
53
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
12,5 % offene Fläche
Schlitzplatte Typ 20/N10 - 8 - 2
16 16 16
2
4
8
2010
10
54
Ideen für Akustik und Design von
Stand: 22.06.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Schlitzplatte Typ 20/N10 - 10,66 - 2
1010
105
5
20
2 10,66
4 16 16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 2
1010
20
2 16
4 16 16 16
55
Ideen für Akustik und Design von
Stand: 22.06.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Schlitzplatte Typ 20/N10 - 10,66 - 2
1010
105
5
20
2 10,66
4 16 16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 2
1010
20
2 16
4 16 16 16
56
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Schlitzplatte Typ 16/N4 - 8 - 3
4
83
4 16 16 1616
1616
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,3 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 3
1010
20
3
4 16 16 16
16
57
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Schlitzplatte Typ 16/N4 - 8 - 3
4
83
4 16 16 16
1616
16
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,3 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 3
1010
20
3
4 16 16 16
16
58
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
12,5 % offene Fläche
Schlitzplatte Typ 16/N4 - 8 - 4
Akustikvlies
84
44
16 16 1616
1616
1010
20
4
4
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
12,5 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 4
16 16 16
16
59
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
12,5 % offene Fläche
Schlitzplatte Typ 16/N4 - 8 - 4
Akustikvlies
84
4
4
16 16 16
1616
16
1010
20
4
4
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
12,5 % offene Fläche
Schlitzplatte Typ 20/N10 - 16 - 4
16 16 16
16
60
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Schlitzplatte Typ 20/N10 - 32 - 4
1010
20
4 32
4 16 16 16
Stand: März 2010
Schnitt B
Schnitt A
A
B B
A
19
80
Akustikvlies
7,2 % offene Fläche
Schlitzplatte Typ P 32 - 4 G
32
4
61
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de
®
63
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ...... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
65
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
12,5 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 8 - 2
2010
10
2 8
160
0,5 4 16
66
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 16 - 2
2010
10
2 16
160
40,5 16
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 10,67 - 2
2010
10
2 10,67
160
40,5 16
67
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 16 - 2
2010
10
2 16
160
40,5 16
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 10,67 - 2
2010
10
2 10,67
160
40,5 16
68
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,3 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 16 - 3
2010
10
3 16
160
40,5 16
Ideen für Akustik und Design von
Stand: Januar 2007
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Paneel geschlitzt Typ P 16/N4 - 8 - 3
1612
4
3 8
160
0,5 4 16
69
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,3 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 16 - 3
2010
10
3 16
160
40,5 16
Ideen für Akustik und Design von
Stand: Januar 2007
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
9,4 % offene Fläche
Paneel geschlitzt Typ P 16/N4 - 8 - 3
1612
4
3 8
160
0,5 4 16
70
Ideen für Akustik und Design von
Stand: 17.07.2006
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
6,2 % offene Fläche
Paneel geschlitzt Typ P 20/N10 - 32 - 4
2010
10
4 32
160
40,5 16
71
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets .......................... 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
73
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikschranktür Typ 16/16/8 - 5Randausführung
74
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
2,1 %/ 7,7 % offene Fläche
Akustikvlies
Akustikschranktür Typ 8/8/5 - 1,2
88
5
1,2
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,7/7,7% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/5 V - 3
1616
16
75
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
2,1 %/ 7,7 % offene Fläche
Akustikvlies
Akustikschranktür Typ 8/8/5 - 1,2
88
5
1,2
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
2,7/7,7% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/5 V - 3
1616
16
76
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7/19,6% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/8 - 5
Ø5
1616
Ø8
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/8 - 8
1616
Ø8
77
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
7,7/19,6% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/8 - 5
Ø5
1616
Ø8
Ideen für Akustik und Design von
Stand: Januar 2008
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
19,6% offene Fläche
Akustikvlies
Akustikschranktür Typ 16/16/8 - 8
1616
Ø8
78
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikschranktür Typ 20/N10 - 16 - 2
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikvlies
Akustikschranktür Typ 20/N10 - 16 - 2
6,2 % offene Fläche
Tür außen Tür innen
79
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikschranktür Typ 20/N10 - 16 - 2
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikvlies
Akustikschranktür Typ 20/N10 - 16 - 2
6,2 % offene Fläche
Tür außen Tür innen
80
Tür außen Tür innen
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikvlies
Akustikschranktür Typ 20/N10 - 16 - 2 quer
6,2 % offene Fläche
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
6,2 % offene Fläche
Akustikvlies
Akustikschranktür Typ 20/N10 - 32 - 4
Tür außen Tür innen
81
Tür außen Tür innen
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
Akustikvlies
Akustikschranktür Typ 20/N10 - 16 - 2 quer
6,2 % offene Fläche
Ideen für Akustik und Design von
Stand: Januar 2004
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de
www.alpha-akustik.de Staudigel
6,2 % offene Fläche
Akustikvlies
Akustikschranktür Typ 20/N10 - 32 - 4
Tür außen Tür innen
83
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ................................................ 10
85
Staudigel
®
Ideen für Akustik und Design
Ideen für Akustik und Design Complete Solutions for Mobile and Permanent Partition Walls
Almost all panel types can be used for the complete solutions for mobile and permanent partition walls.
Please contact us to learn more.
87
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
11,57 % offene Fläche
Stand: Jan. 2004Schlitzplatte mit Aufdopplung Typ R 20/16 - 3
Dämmstoff Akustikvlies
Wandschale innenWandschale außen
20
16 3
88
6,2 % offene Fläche
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Schlitzplatte mit Aufdopplung Typ E36 20/N10 -16 - 2
16
10
2010
102
16 10
Däm
mst
off
Dämmstoff
Stand: 25.09.2007
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Stand: 22.06.2006Lochplatte mit Aufdopplung Typ E 49 16/16/5 - 5
Gipsplatte 10 mm
Gip
spla
tte
10 m
m
Däm
mst
off
Dämmstoff
102910
1910
165
16
89
6,2 % offene Fläche
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Schlitzplatte mit Aufdopplung Typ E36 20/N10 -16 - 2
16
10
2010
10
2
16 10
Däm
mst
off
Dämmstoff
Stand: 25.09.2007
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Stand: 22.06.2006Lochplatte mit Aufdopplung Typ E 49 16/16/5 - 5
Gipsplatte 10 mmG
ipsp
latt
e 10
mm
Däm
mst
off
Dämmstoff
102910
1910
165
16
90
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Lochplatte mit Aufdopplung Typ E36 16/16/5 - 5 Stand: 25.09.2007
165
1610 10
1616
Däm
mst
off
Dämmstoff
7,7 % offene Fläche
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Lochplatte mit Aufdopplung Typ E36 16/16/8 - 8
16 10
Däm
mst
off
Dämmstoff
8 16
10
16
Stand: 25.09.2007
19,6 % offene Fläche
91
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Lochplatte mit Aufdopplung Typ E36 16/16/5 - 5 Stand: 25.09.2007
165
1610 10
1616
Däm
mst
off
Dämmstoff
7,7 % offene Fläche
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Akustikvlies
Lochplatte mit Aufdopplung Typ E36 16/16/8 - 8
16 10
Däm
mst
off
Dämmstoff
8 16
10
16
Stand: 25.09.2007
19,6 % offene Fläche
92
Ideen für Akustik und Design von
®
Staudigel GmbHTel. 09 31 / 9 70 54-0Fax 09 31 / 9 70 54-54E-Mail: [email protected]: www.staudigel.de www.alpha-akustik.de Staudigel
Stand: 09.01.2008Lochplatte mit Aufdopplung Typ E 198 8/8/5 - 1,2
2,1 % offene Fläche
19 160 19
Akustikvlies
Däm
mst
off
Dämmstoff
8 Ø5 Ø1,2
93
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ................................................................... 9
General Terms and Conditions ................................................ 10
95
Staudigel
®
Ideen für Akustik und Design
Mounting
• There are various ways to fix the Alpha Akustik panels to the wall and the ceiling.
• Generally, the mounting method must always be carefully adapted to the properties of the respective type of panel and material.
• For technical support, see the examples for mounting methods and substructures in the diagrams below.
This is not a full list of mounting techniques as there are many more installation systems available on the market.
If you have any questions on mounting techniques, please contact Staudigel.
Important instructions for installation
The wall and ceiling panels delivered by the manufacturer may only be mounted if the following conditions are met:
• the respective walls in the building have fully dried,• sufficient air space has been provided behind the panels,• the substructure allows for mounting the panels in a distance of approx. 500 mm, and• the substructure and the expansion joints are in accordance with the materials’ shrinking and swelling behaviour.
For a panel length of 2,000 mm, we recommend a joint of no less than 5 mm!
If you disregard the above aspects when mounting the panels, warping and possibly damage to the panels may occur. This will not be covered by the manufacturer’s warranty!
97
Ideen für Akustik und Design
®
Staudigel
Wandmontage mit Einhängeleisten oder Einhängemetallprofilen
Die Einhängeleisten oder die Einhängeprofile können
direkt auf die Wand oder auf eine Unterkonstruktion
aus Holz oder Metall geschraubt werden.
Je nach Plattentyp und Plattenstärke
soll der Abstand zwischen den Aufhängeprofilen
zwischen 500 – 600 mm betragen.
Einhängeleisten
EinhängeprofilWandseite03-12-3489
Wall mounting with suspension rails or metal suspension profiles
Suspension rails or profiles can be screwed directly
to the wall or a wood or metal substructure.
Depending on panel type and thickness,
the distance between the suspension profiles
should be between 500 and 600 mm.
98
Ideen für Akustik und Design
®
Staudigel
Befestigung mit Profilschraubenkrallen
Befestigung mit Klammern
Nut und Feder Paneele können an Wand und Decke mit
Profilschraubkrallen befestigt werden. Die Unterkonstruktion
kann in Metall oder Holz sein und ist immer quer zu den
Paneelen angebracht.
Die Aufhängung der Unterkonstruktion erfolgt mit Direkt- oder
Noniusabhänger.
Bei Unterkonstruktionen aus Holz kann die Befestigung mit handelsüblichen
Druckluftnaglern erfolgen.
Ideen für Akustik und Design
®
Staudigel
Wand- und Deckenanschluss
Wand-/Deckenanschluss
mit Schattenfuge
Wand-/Deckenanschluss
mit Abschlussleiste
Wand-/Deckenanschluss
mit Randfries
Mounting with threaded profile claw fasteners
Tongue-and-groove panels are mounted to walls
and ceilings with threaded claw fasteners.
The substructure can be wood or metal;
it is always mounted at right angles to the panels.
The substructure is suspended with direct
or Nonius suspension pieces.
Mounting with retainer clips
With wooden substructures, the panels may be mounted
with a standard nailer gun.
99
Ideen für Akustik und Design
®
Staudigel
Befestigung mit Profilschraubenkrallen
Befestigung mit Klammern
Nut und Feder Paneele können an Wand und Decke mit
Profilschraubkrallen befestigt werden. Die Unterkonstruktion
kann in Metall oder Holz sein und ist immer quer zu den
Paneelen angebracht.
Die Aufhängung der Unterkonstruktion erfolgt mit Direkt- oder
Noniusabhänger.
Bei Unterkonstruktionen aus Holz kann die Befestigung mit handelsüblichen
Druckluftnaglern erfolgen.
Ideen für Akustik und Design
®
Staudigel
Wand- und Deckenanschluss
Wand-/Deckenanschluss
mit Schattenfuge
Wand-/Deckenanschluss
mit Abschlussleiste
Wand-/Deckenanschluss
mit Randfries
Wall/ceiling junction
with shadow gap
Wall/ceiling junction
with border strip
Wall/ceiling junction
with edge frieze
Wall and ceiling junctions
100
Ideen für Akustik und Design
®
Staudigel
Ecklösungen
Außenecke auf Gehrung mit Schlitzung horizontal
Außenecke auf Gehrung mit Schlitzung vertikal
Innenecke stumpf gestoßen
Ideen für Akustik und Design
®
Staudigel
Befestigung mit Hutprofil DP 59
Bei Unterkonstruktion aus Metall, zusammen mit dem Hutprofil können Platten in einer Größe von
max. 3000 x 625 mm befestigt werden. Diese Befestigung ist für Decken und Wände geeignet.
Durch entsprechende Fräsungen kann jede Fugenbreite hergestellt werden.
Haarfuge
5 mm Fuge mit Feder
10 mm Fuge ohne Feder
15 mm Fuge mit Feder
Corner solutions
Outside corner, miter joint, with horizontal slat
Outside corner, miter joint, with vertical slat
Inside corner, butt joint
101
Ideen für Akustik und Design
®
Staudigel
Ecklösungen
Außenecke auf Gehrung mit Schlitzung horizontal
Außenecke auf Gehrung mit Schlitzung vertikal
Innenecke stumpf gestoßen
Ideen für Akustik und Design
®
Staudigel
Befestigung mit Hutprofil DP 59
Bei Unterkonstruktion aus Metall, zusammen mit dem Hutprofil können Platten in einer Größe von
max. 3000 x 625 mm befestigt werden. Diese Befestigung ist für Decken und Wände geeignet.
Durch entsprechende Fräsungen kann jede Fugenbreite hergestellt werden.
Haarfuge
5 mm Fuge mit Feder
10 mm Fuge ohne Feder
15 mm Fuge mit Feder
Mounting with cap profile DP 59
With metal substructures, panels of max. 3000 x 625 mm can be mounted with a cap profile.
This mounting type is suitable for ceilings and walls. All joint widths can be produced by milling
to the desired dimension.
Hairline joint
5 mm joint with spring
10 mm joint without spring
15 mm joint with spring
103
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUPaneel-MontagesystemEinsatzbereichDas Paneel-Montagesystem verkleidet Wände.Die Grundkonstruktion wird mit Einhänge-profilen gebildet. Das System zeichnet sich durch einfache und rationelle Montage aus.
Oberstes waagrechtes Einhängeprofil mit min. 120 mm Abstand zur Deckenunterkante montieren. In dieses Einhängeprofil senkrechte Einhängeprofile einhängen und Montage-höhen weiterer waagrechter Einhängeprofile anreißen.
Bei Paneelwänden mit Fugen von links nach rechts arbeiten.Fugenprofile können vor oder nach dem Einhängen des Paneels aufgeclipst werden.
Auf Paneel senkrechte Einhängeprofile (Oberkante bündig) montieren und an der Paneel-Unterkante ablängen.
Anwendungen
Montage
BeispielBei einer Paneelbreite von 0,7 - 1,0 m und Paneelhöhe von 3,0 m benötigen Sie:• 3 senkrechte Einhängeprofile á 3,0 m• 3 waagrechte Einhängeprofile á 1,0 m• 1 Fugenprofil á 3,0 m (bei Bedarf)
Distanz:min. 120 mm
waagrechtesEinhängeprofil
senkrechtesEinhängeprofil
Distanz:min. 20 mm
Einhängeweg:min. 15 mm
bei Verwendungvon Decken-oder Fußleiste:Dicke max. 6 mm
Fugenbreite (Beispiel)
Wandanschluss Wandabschluss Glasanschluss
Distanz:min. 120 mm
Montageabstand
Fugenprofil
104
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEinhängeprofilwaagrecht
Fugenprofil
senkrecht
Montage: zum Schrauben an die WandWerkstoff: StahlOberfläche: verzinkt
Artikel-Nr.
783.50.950
Abpackung: 5 m
Montage: zum Schrauben an das Paneel und Einhängen in waagrechtes Einhängeprofil
Artikel-Nr.
783.51.930
Abpackung: 3 m
Hinweis:Im Bereich des Einhängehakens des senkrechten Einhängeprofils Tellerkopfschrauben verwenden, um ausreichende Stabilität zu erzielen.
Werkstoff: KunststoffMontage: zum Aufclipsen auf senkrechtes Einhängeprofil
Farbe Artikel-Nr.
grau 783.52.535
braun 783.52.135
weiß 783.52.735
Abpackung: 3 m
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Stellprofil
Boden- undDeckenprofil
Profilverbinder
Hochstell-schraube
Fugenprofil
Tragprofil
Paneel-verbinder AS
Paneel-verbinder ASR
Wand-/Deckenbefestigung
Fugenbreite F mm Abstand LA mm
0 37,0
5 34,5
10 32,0
15 29,5
20 27,0
25 24,5
Schema Wandverkleidung
FugenbreiteFür die Ausgestaltung der Fugenbreite sind bei Paneelverbindern KEKU (Rahmenteil ASR und Plattenteil AS) folgende Maße einzuhalten:
EinsatzbereichDas Raumsystem KEKU R verkleidet Wände und Decken mit einer Rahmenkonstruktion (Unterkonstruktion) aus Aluminium-Profilen. Ebenso kann es freistehende leichte und 2-schalige Trennwände bilden.Eingesetzt wird KEKU R beim Laden- und Messebau und im Innenausbau.
MontageDie Aluminium-Profile können auf verschiedene Art und Weise montiert werden. Für die Varianten werden im Detail unterschiedliche Montageelemente verwendet.
Befestigung von PlattenIn die Lochungen der Profile werden wahlweise Paneelverbinder KEKU ASR oder Einhänge- und Aufdopplungs-Beschläge geschraubt.Auf diese Beschläge werden Platten, Paneele oder Massivholzplatten aufgeclipst. Sie können jederzeit wieder einfach gelöst werden.
Rahmenteil ASR
Plattenteil AS
105
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEinhängeprofilwaagrecht
Fugenprofil
senkrecht
Montage: zum Schrauben an die WandWerkstoff: StahlOberfläche: verzinkt
Artikel-Nr.
783.50.950
Abpackung: 5 m
Montage: zum Schrauben an das Paneel und Einhängen in waagrechtes Einhängeprofil
Artikel-Nr.
783.51.930
Abpackung: 3 m
Hinweis:Im Bereich des Einhängehakens des senkrechten Einhängeprofils Tellerkopfschrauben verwenden, um ausreichende Stabilität zu erzielen.
Werkstoff: KunststoffMontage: zum Aufclipsen auf senkrechtes Einhängeprofil
Farbe Artikel-Nr.
grau 783.52.535
braun 783.52.135
weiß 783.52.735
Abpackung: 3 m
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Stellprofil
Boden- undDeckenprofil
Profilverbinder
Hochstell-schraube
Fugenprofil
Tragprofil
Paneel-verbinder AS
Paneel-verbinder ASR
Wand-/Deckenbefestigung
Fugenbreite F mm Abstand LA mm
0 37,0
5 34,5
10 32,0
15 29,5
20 27,0
25 24,5
Schema Wandverkleidung
FugenbreiteFür die Ausgestaltung der Fugenbreite sind bei Paneelverbindern KEKU (Rahmenteil ASR und Plattenteil AS) folgende Maße einzuhalten:
EinsatzbereichDas Raumsystem KEKU R verkleidet Wände und Decken mit einer Rahmenkonstruktion (Unterkonstruktion) aus Aluminium-Profilen. Ebenso kann es freistehende leichte und 2-schalige Trennwände bilden.Eingesetzt wird KEKU R beim Laden- und Messebau und im Innenausbau.
MontageDie Aluminium-Profile können auf verschiedene Art und Weise montiert werden. Für die Varianten werden im Detail unterschiedliche Montageelemente verwendet.
Befestigung von PlattenIn die Lochungen der Profile werden wahlweise Paneelverbinder KEKU ASR oder Einhänge- und Aufdopplungs-Beschläge geschraubt.Auf diese Beschläge werden Platten, Paneele oder Massivholzplatten aufgeclipst. Sie können jederzeit wieder einfach gelöst werden.
Rahmenteil ASR
Plattenteil AS
106
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Boden- und Deckenprofil –U-Form
Länge m Artikel-Nr.
6 782.10.000
Tragprofil – H-Form
Einsatzbereich: zum Befestigen der Aufschiebe- und Einhängebeschläge im System 32Werkstoff: AluminiumOberfläche: blankAusführung: H-Form
Einsatzbereich: zum Aufstellen, Verspannen und Ausrichten der RahmenkonstruktionWerkstoff: AluminiumOberfläche: blankAusführung: U-FormMontage: in Kombination mit Stellprofil und Stellschraube
Montagehinweis:Bohrungen für M8-Stellschrauben werden in die Nutmarkierung eingebohrt
Abpackung: 1 Stück
Länge m Artikel-Nr.
6 782.11.000
Abpackung: 1 Stück
Stellschraube
Stellprofil
Boden- undDeckenprofil
3D-Wand-/Deckenbefestigungfür Tragprofil
Artikel-Nr.
782.00.900
Einsatzbereich: zur Wand- und Deckenmontage des TragprofilsWerkstoff: StahlOberfläche: verzinktEinstellmöglichkeit: in 3 Richtungen justierbarMontage: zum Schrauben mit vormontierter M8-Schraube
Lieferumfang:1 Federunterlagscheibe1 Sechskantmutter M8
Montage
Montage
Abpackung: 1 oder 10 Stück
Einstellbereich10 mm
Tragprofil
Wand-/Deckenbefestigung
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Profilverbinder 90°
Einsatzbereich: zum Verbinden von Tragprofilen mit Boden- und DeckenprofilenWerkstoff: AluminiumOberfläche: blankMontage: zum Einschieben und Schrauben mit Systemschraube
Hinweis:Bei der Wandmontage der Rahmenkonstruktion sollte ein Abstand von 832 mm zwischen den Montageplatten eingehalten werden.
Artikel-Nr.
782.15.060
Abpackung: 1 oder 10 Stück
Stellprofil
Hochstellschraubemit Nutenstein
Länge m Artikel-Nr.
3 782.12.000
Einsatzbereich: zur Befestigung des Boden- und DeckenprofilsWerkstoff: AluminiumOberfläche: blankMontage: in Kombination mit Boden- und Deckenprofil und Stellschraube durch Verspannen
Einsatzbereich: zur Verspannen und Ausrichten des Boden- und DeckenprofilsWerkstoff: M8-Schraube aus Stahl, Nutenstein aus AluminiumOberfläche: M8-Schraube chromatiert, Nutenstein blankSchraubenlänge: 30 mm
Abpackung: 1 Stück
Artikel-Nr.
782.16.000
Abpackung: 1 oder 10 Stück
Tragprofil
Montageplatte
Montage
System-schraube
Profilverbinder
Tragprofil
Stellprofil
Boden- undDeckenprofil
107
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Boden- und Deckenprofil –U-Form
Länge m Artikel-Nr.
6 782.10.000
Tragprofil – H-Form
Einsatzbereich: zum Befestigen der Aufschiebe- und Einhängebeschläge im System 32Werkstoff: AluminiumOberfläche: blankAusführung: H-Form
Einsatzbereich: zum Aufstellen, Verspannen und Ausrichten der RahmenkonstruktionWerkstoff: AluminiumOberfläche: blankAusführung: U-FormMontage: in Kombination mit Stellprofil und Stellschraube
Montagehinweis:Bohrungen für M8-Stellschrauben werden in die Nutmarkierung eingebohrt
Abpackung: 1 Stück
Länge m Artikel-Nr.
6 782.11.000
Abpackung: 1 Stück
Stellschraube
Stellprofil
Boden- undDeckenprofil
3D-Wand-/Deckenbefestigungfür Tragprofil
Artikel-Nr.
782.00.900
Einsatzbereich: zur Wand- und Deckenmontage des TragprofilsWerkstoff: StahlOberfläche: verzinktEinstellmöglichkeit: in 3 Richtungen justierbarMontage: zum Schrauben mit vormontierter M8-Schraube
Lieferumfang:1 Federunterlagscheibe1 Sechskantmutter M8
Montage
Montage
Abpackung: 1 oder 10 Stück
Einstellbereich10 mm
Tragprofil
Wand-/Deckenbefestigung
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKU
Profilverbinder 90°
Einsatzbereich: zum Verbinden von Tragprofilen mit Boden- und DeckenprofilenWerkstoff: AluminiumOberfläche: blankMontage: zum Einschieben und Schrauben mit Systemschraube
Hinweis:Bei der Wandmontage der Rahmenkonstruktion sollte ein Abstand von 832 mm zwischen den Montageplatten eingehalten werden.
Artikel-Nr.
782.15.060
Abpackung: 1 oder 10 Stück
Stellprofil
Hochstellschraubemit Nutenstein
Länge m Artikel-Nr.
3 782.12.000
Einsatzbereich: zur Befestigung des Boden- und DeckenprofilsWerkstoff: AluminiumOberfläche: blankMontage: in Kombination mit Boden- und Deckenprofil und Stellschraube durch Verspannen
Einsatzbereich: zur Verspannen und Ausrichten des Boden- und DeckenprofilsWerkstoff: M8-Schraube aus Stahl, Nutenstein aus AluminiumOberfläche: M8-Schraube chromatiert, Nutenstein blankSchraubenlänge: 30 mm
Abpackung: 1 Stück
Artikel-Nr.
782.16.000
Abpackung: 1 oder 10 Stück
Tragprofil
Montageplatte
Montage
System-schraube
Profilverbinder
Tragprofil
Stellprofil
Boden- undDeckenprofil
108
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEckwinkel 90°Längsverbinder
Einsatzbereich: zum Verbinden von 2 Tragprofilen über eine 90°-EckeWerkstoff: AluminiumOberfläche: blankMontage: zum Schrauben mit Systemschraube
Artikel-Nr.
782.15.080
Abpackung: 1 oder 10 Stück
Einsatzbereich: zum Zusammensetzen von Tragprofilen oder Boden- und DeckenprofilenWerkstoff: AluminiumOberfläche: blankAusführung: mit vormontiertem Gummieinsatz zum Fixieren im ProfilMontage: zum Einschieben und Schrauben mit Systemschraube
Montage
Artikel-Nr.
782.15.010
Abpackung: 1 oder 10 Stück
Tragprofil
Schloßschraube M8 x 16
Längsverbinder
Montage Tragprofil
Eckwinkel 90° Systemschraube
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEinschubverbinderH-Profil seitlich
QuerverbinderH-Profil vorne
Artikel-Nr.
782.15.070
Abpackung: 1 oder 10 Stück
Einsatzbereich: für T-förmige, quer liegende Abgänge am Tragprofil (System-32-Bohrungen seitlich)Werkstoff: AluminiumOberfläche: blankAusführung: mit vormontierten Madenschrauben SW 4Montage: zum Einschieben und Schrauben
• Querverbinder und senkrechtes Tragprofil werden mit Systemschrauben verbunden• Querverbinder und waagrechtes Tragprofil werden mit 2 vormontierten Madenschrauben verbunden
• Einschubverbinder und Tragprofil werden mit 4 Systemschrauben verbunden
Montage Montage
Artikel-Nr.
782.15.030
Abpackung: 1 oder 10 Stück
Systemschraube
Querverbinder
SW 4
Tragprofil
Tragprofil
Einschubverbinder
Tragprofil
Tragprofil
Einsatzbereich: für T-förmige, quer liegende Abgänge am Tragprofil (System-32-Bohrungen vorne)Werkstoff: AluminiumOberfläche: blankMontage: zum Einschieben und Schrauben mit Systemschraube
109
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEckwinkel 90°Längsverbinder
Einsatzbereich: zum Verbinden von 2 Tragprofilen über eine 90°-EckeWerkstoff: AluminiumOberfläche: blankMontage: zum Schrauben mit Systemschraube
Artikel-Nr.
782.15.080
Abpackung: 1 oder 10 Stück
Einsatzbereich: zum Zusammensetzen von Tragprofilen oder Boden- und DeckenprofilenWerkstoff: AluminiumOberfläche: blankAusführung: mit vormontiertem Gummieinsatz zum Fixieren im ProfilMontage: zum Einschieben und Schrauben mit Systemschraube
Montage
Artikel-Nr.
782.15.010
Abpackung: 1 oder 10 Stück
Tragprofil
Schloßschraube M8 x 16
Längsverbinder
Montage Tragprofil
Eckwinkel 90° Systemschraube
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUEinschubverbinderH-Profil seitlich
QuerverbinderH-Profil vorne
Artikel-Nr.
782.15.070
Abpackung: 1 oder 10 Stück
Einsatzbereich: für T-förmige, quer liegende Abgänge am Tragprofil (System-32-Bohrungen seitlich)Werkstoff: AluminiumOberfläche: blankAusführung: mit vormontierten Madenschrauben SW 4Montage: zum Einschieben und Schrauben
• Querverbinder und senkrechtes Tragprofil werden mit Systemschrauben verbunden• Querverbinder und waagrechtes Tragprofil werden mit 2 vormontierten Madenschrauben verbunden
• Einschubverbinder und Tragprofil werden mit 4 Systemschrauben verbunden
Montage Montage
Artikel-Nr.
782.15.030
Abpackung: 1 oder 10 Stück
Systemschraube
Querverbinder
SW 4
Tragprofil
Tragprofil
Einschubverbinder
Tragprofil
Tragprofil
Einsatzbereich: für T-förmige, quer liegende Abgänge am Tragprofil (System-32-Bohrungen vorne)Werkstoff: AluminiumOberfläche: blankMontage: zum Einschieben und Schrauben mit Systemschraube
110
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUFugenprofilgelocht
Fugenprofil-Sicherungfür Fugenprofil gelocht
Länge m Artikel-Nr.
3 782.14.000
Abpackung: 1 Stück
Einsatzbereich: zum Einhängen von Konsolen und WarenträgernWerkstoff: AluminiumOberfläche: blankMontage: zum Einpressen in Tragprofilnach Verbindung mit Fugenprofil-SicherungRaster: 50 mm
Einsatzbereich: zur Sicherung des Fugenprofils mit LochungTragkraft: max. 15 kg/EinhängepositionWerkstoff: AluminiumOberfläche: blankMontage: zum Einclipsen in Fugenprofil mit Schlitzlochung
Montage
• Fugenprofil-Sicherung in Fugenprofil mit Lochung einclipsen• Fugenprofil mit Lochung mit vormontierter Fugenprofil- Sicherung in das Tragprofil einpressen• Mit Systemschraube sichern
Tragprofil
Systemschraube
Fugenprofil-Sicherung
Fugenprofil mitSchlitzlochung
Artikel-Nr.
782.15.090
Abpackung: 1 oder 10 Stück
Hinweis:Unabhängig von der Fugenprofil-Länge wird eine Fugenprofil-Sicherung am oberen Profilende und an jeder Einhängeposition montiert.Bei stark belastetem Einsatz ist zu überprüfen, ob eine durchgehende Profilsicherung angewendet werden muss.
Systemschraubeselbstschneidend
Artikel-Nr.
782.17.900
Abpackung: 100 Stück
Einsatzbereich: zur Montage aller Beschläge und Verbinder des RaumsystemsWerkstoff: StahlOberfläche: verzinktSchrauben-O: 4 mmAntrieb: Kreuzschlitz PZ 2Länge: 10 mm
111
Ideen für Akustik und Design
®
Staudigel
Häfele Raumsystem KEKUFugenprofilgelocht
Fugenprofil-Sicherungfür Fugenprofil gelocht
Länge m Artikel-Nr.
3 782.14.000
Abpackung: 1 Stück
Einsatzbereich: zum Einhängen von Konsolen und WarenträgernWerkstoff: AluminiumOberfläche: blankMontage: zum Einpressen in Tragprofilnach Verbindung mit Fugenprofil-SicherungRaster: 50 mm
Einsatzbereich: zur Sicherung des Fugenprofils mit LochungTragkraft: max. 15 kg/EinhängepositionWerkstoff: AluminiumOberfläche: blankMontage: zum Einclipsen in Fugenprofil mit Schlitzlochung
Montage
• Fugenprofil-Sicherung in Fugenprofil mit Lochung einclipsen• Fugenprofil mit Lochung mit vormontierter Fugenprofil- Sicherung in das Tragprofil einpressen• Mit Systemschraube sichern
Tragprofil
Systemschraube
Fugenprofil-Sicherung
Fugenprofil mitSchlitzlochung
Artikel-Nr.
782.15.090
Abpackung: 1 oder 10 Stück
Hinweis:Unabhängig von der Fugenprofil-Länge wird eine Fugenprofil-Sicherung am oberen Profilende und an jeder Einhängeposition montiert.Bei stark belastetem Einsatz ist zu überprüfen, ob eine durchgehende Profilsicherung angewendet werden muss.
Systemschraubeselbstschneidend
Artikel-Nr.
782.17.900
Abpackung: 100 Stück
Einsatzbereich: zur Montage aller Beschläge und Verbinder des RaumsystemsWerkstoff: StahlOberfläche: verzinktSchrauben-O: 4 mmAntrieb: Kreuzschlitz PZ 2Länge: 10 mm
113
Ideen für Akustik und Design
®
Staudigel
FRÜH Unterkonstruktionen Direkte Montage auf Wand oder DeckeAuf ebene und glatte Flächen kann die Unterkonstruktion direkt aufmontiert werden. Beachten Sie aber bitte, dass jede direkt und fest anliegende Konstruktion von allen möglichen Ausführungen die Schlechsteste ist, weil sie nur dekorative Funktionen wahrnehmen kann.
SchnellbauschienenNr. 270
WandschienenNr. 280
SchnellbauschieneNr. 27018 mm Steghöhe
WandschieneNr. 2808 mm Steghöhe
AER KlippNr. 350
Paneeldrehklipp3 - 7 mm Nutwange10 - 20 mm Fuge
Stockschrauben60/ 80/ 100/ 125/ 150 mm
Spezial- undKontermutternNr. 525/M5
Disko-Klick1/ 3/ 5 mm
Profilholzdrehklipp2,5 - 5 mm mm Fuge
Holzunterkonstruktion
FRÜH-Krallen verschiedener Artund Ausführung zur Montagevon Profilholz Oaneelen und Platten auf Holzunter-konstruktionen.
114
Ideen für Akustik und Design
®
Staudigel
Montage mit Abstand von Wand oder DeckeWer hinsichtlich Wärmedämmung oder Schallschutz spürbare Verbesserungen erwartet, muss die Unterkonstruktion – von den Befestigungsstellen abgesehen – ohne direkte Berührung der Decke oder des Mauerwerks freitragende montieren.
Materialbedarfsermittlung/Stückliste System 270/280Ihr Bedarfszahlen können Sie wie folgt ermitteln:
• Masse = Länge x Breite der zu verkleidenden Wand/Decke.
• Nach Angaben der Paneelhersteller Schienenabstand einteilen.
• Faustregel bei 90 Grad Verlegung ca. alle 50 cm, bei 45 Grad (Diagonal-Verlegung) alle 35 - 40 cm, Paneel-Längsstoss beachten:
• Abhänge/Ausgleichshöhe.
• Drehklippdedarf richtet sich nach Paneel-/Profilholzbreite.
• Anf./Enddrehklippse = Schienenreihen x 2.
Akustik-Schwinghänger
Akustik-Schwingelement
SchnellbauschieneNr. 270
FRÜH-Drehklips in verschiedenen Ausführungen zur Montagevon Profilholz und Paneelen aufMetallunterkonstruktionen.
Kurzabhänger
Starre U-Abhänge-programm
Ideen für Akustik und Design
®
Staudigel
Ballwurfsichere Wandverkleidung,Hutprofil eingeschoben, Plattenbreite 625 mmKonstruktionssystem 273
Ca. Bedarfsmengen pro m2 Deckenfläche
Grobrostabstand ≤ max. 1250 mm
Feinrostabstand ≤ max. 260 mm
Hängerabstand ≤ max. 1000 mm
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche mindestens 1 Abhänger vorzusehen
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Artikel Plattenbreite 625 mm
DP 16 Trageprofil/Grobrost 0,80 meter
DP 16 Unterprofil/Feinrost 3,85 meter
1/104 Längsverbinder für DP 16 1,17 St
1/22 A Kreuzschnellverbinder 3,08 St
1/29 A Direktabhänger 0,80 St
1/29 B
1/29 C
1/29 D
DP 59 Hutprofil 1,60 St
2/421 Spezialschrauben mit Teks-Bohrspitze 3,81 St
Menge der Wandwinkel und Wandanschlußschuhen entsprechend den Raumgrößen.
DP 16
DP 59Hutprofil
1/22 A
1/29
115
Ideen für Akustik und Design
®
Staudigel
Montage mit Abstand von Wand oder DeckeWer hinsichtlich Wärmedämmung oder Schallschutz spürbare Verbesserungen erwartet, muss die Unterkonstruktion – von den Befestigungsstellen abgesehen – ohne direkte Berührung der Decke oder des Mauerwerks freitragende montieren.
Materialbedarfsermittlung/Stückliste System 270/280Ihr Bedarfszahlen können Sie wie folgt ermitteln:
• Masse = Länge x Breite der zu verkleidenden Wand/Decke.
• Nach Angaben der Paneelhersteller Schienenabstand einteilen.
• Faustregel bei 90 Grad Verlegung ca. alle 50 cm, bei 45 Grad (Diagonal-Verlegung) alle 35 - 40 cm, Paneel-Längsstoss beachten:
• Abhänge/Ausgleichshöhe.
• Drehklippdedarf richtet sich nach Paneel-/Profilholzbreite.
• Anf./Enddrehklippse = Schienenreihen x 2.
Akustik-Schwinghänger
Akustik-Schwingelement
SchnellbauschieneNr. 270
FRÜH-Drehklips in verschiedenen Ausführungen zur Montagevon Profilholz und Paneelen aufMetallunterkonstruktionen.
Kurzabhänger
Starre U-Abhänge-programm
Ideen für Akustik und Design
®
Staudigel
Ballwurfsichere Wandverkleidung,Hutprofil eingeschoben, Plattenbreite 625 mmKonstruktionssystem 273
Ca. Bedarfsmengen pro m2 Deckenfläche
Grobrostabstand ≤ max. 1250 mm
Feinrostabstand ≤ max. 260 mm
Hängerabstand ≤ max. 1000 mm
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche mindestens 1 Abhänger vorzusehen
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Artikel Plattenbreite 625 mm
DP 16 Trageprofil/Grobrost 0,80 meter
DP 16 Unterprofil/Feinrost 3,85 meter
1/104 Längsverbinder für DP 16 1,17 St
1/22 A Kreuzschnellverbinder 3,08 St
1/29 A Direktabhänger 0,80 St
1/29 B
1/29 C
1/29 D
DP 59 Hutprofil 1,60 St
2/421 Spezialschrauben mit Teks-Bohrspitze 3,81 St
Menge der Wandwinkel und Wandanschlußschuhen entsprechend den Raumgrößen.
DP 16
DP 59Hutprofil
1/22 A
1/29
116
Ideen für Akustik und Design
®
Staudigel
Ballwurfsichere Deckenkonstruktion,Hutprofil eingeschoben, teilverdeckt, Plattenbreite 625 mmKonstruktionssystem 270
Ca. Bedarfsmengen pro m2 Deckenfläche
Grobrostabstand ≤ max. 1250 mm
Feinrostabstand ≤ max. 625 mm
Hängerabstand ≤ max. 1200 mm
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche mindestens 1 Abhänger vorzusehen.
Artikel Plattenbreite 625 mm
DP 16 Trageprofil/Grobrost 0,80 meter
DP 16 Unterprofil/Feinrost 1,60 meter
1/104 Längsverbinder für DP 16 Profil 0,60 St
1/22 A Kreuzschnellverbinder 1,28 St
1/37 C 62 + 1/30 Noniushänger 0,67 St
1/14 Sicherungsklammer 1,34 St
DP 59 Hutprofil 1,60 St
2/421 Spezialschrauben mit Teks-Bohrspitze 2,56 St
Menge der Wandwinkel und Wandanschlußschuhen entsprechend den Raumgrößen.
DP 16
DP 59Hutprofil
1/22 A
DP 59 H
DP 37
1/30
WA 161/37 C 62
1/14
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Ideen für Akustik und Design
®
Staudigel
Einlegesystem in verschiedenen Profilbreiten, in allen Achsmaßen lieferbar.Konstruktionssystem 200
Dieses System erlaubt das einfache
Herausnehmen jeder Platte.
Ca. Bedarfsmengen pro m2 Deckenfläche; Beispiele:
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche
mindestens 1 Abhänger vorzusehen.
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Artikel Plattenbreite 625 x 2150 mm
DP 33 / DP 08 / DP 09 Hauptprofil 1,60 meter
DP 33 / DP 35 / Querprofil 0,47 meter
DP 36 / DP 08 / DP 09
1/84 Längsverbinder 0,32 St
1/30 Noniushänger Oberteil 1,28 St
1/37 L Noniushänger Unterteil 1,28 St
1/14 Sicherungsklammer 2,56 St
Menge der Wandwinkel entsprechend den Raumgrößen.
1/37 L
1/30
1/14
1/83
1/82DP 37 L
1/84
1/83
DP 36 5 mm
1/85 A
1/85 A1/85 A
HauptprofilDP 33 L - 15 mmDP 08 L - 18 mmDP 09 L - 24 mm
QuerprofilDP 36 LG - 5 mmDP 35 LG - 10 mmDP 33 LG - 15 mmDP 08 LG - 18 mmDP 09 LG - 24 mm
Montage der Anschlußteile
in maßgenau vorgestanzte
und geschlitzte Querprofile
durch einfaches Einklipsen.
DP 36 - 5 mm DP 33 - 15 mmDP 08 - 18 mmDP 09 - 24 mm
DP 35 - 10 mm DP 33 - 15 mmDP 08 - 18 mmDP 09 - 24 mm
DP 08 - 5 mmDP 09 - 10 mm
Schnitt durch Konstruktion und Deckenplatte
117
Ideen für Akustik und Design
®
Staudigel
Ballwurfsichere Deckenkonstruktion,Hutprofil eingeschoben, teilverdeckt, Plattenbreite 625 mmKonstruktionssystem 270
Ca. Bedarfsmengen pro m2 Deckenfläche
Grobrostabstand ≤ max. 1250 mm
Feinrostabstand ≤ max. 625 mm
Hängerabstand ≤ max. 1200 mm
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche mindestens 1 Abhänger vorzusehen.
Artikel Plattenbreite 625 mm
DP 16 Trageprofil/Grobrost 0,80 meter
DP 16 Unterprofil/Feinrost 1,60 meter
1/104 Längsverbinder für DP 16 Profil 0,60 St
1/22 A Kreuzschnellverbinder 1,28 St
1/37 C 62 + 1/30 Noniushänger 0,67 St
1/14 Sicherungsklammer 1,34 St
DP 59 Hutprofil 1,60 St
2/421 Spezialschrauben mit Teks-Bohrspitze 2,56 St
Menge der Wandwinkel und Wandanschlußschuhen entsprechend den Raumgrößen.
DP 16
DP 59Hutprofil
1/22 A
DP 59 H
DP 37
1/30
WA 161/37 C 62
1/14
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Ideen für Akustik und Design
®
Staudigel
Einlegesystem in verschiedenen Profilbreiten, in allen Achsmaßen lieferbar.Konstruktionssystem 200
Dieses System erlaubt das einfache
Herausnehmen jeder Platte.
Ca. Bedarfsmengen pro m2 Deckenfläche; Beispiele:
Nach DIN 18168 ist auf 1,5 m2 Deckenfläche
mindestens 1 Abhänger vorzusehen.
Alle Mengen sind auf Basis einer großflächigen Endlosverlegung ermittelt, ohne Berücksichtigung der Wandanschlußfelder. Bei kleineren Räumen können sich die Bedarfsmengen erheblich erhöhen. Eine Gewähr für vorstehende Auflistung können wir nicht übernehmen.
Artikel Plattenbreite 625 x 2150 mm
DP 33 / DP 08 / DP 09 Hauptprofil 1,60 meter
DP 33 / DP 35 / Querprofil 0,47 meter
DP 36 / DP 08 / DP 09
1/84 Längsverbinder 0,32 St
1/30 Noniushänger Oberteil 1,28 St
1/37 L Noniushänger Unterteil 1,28 St
1/14 Sicherungsklammer 2,56 St
Menge der Wandwinkel entsprechend den Raumgrößen.
1/37 L
1/30
1/14
1/83
1/82DP 37 L
1/84
1/83
DP 36 5 mm
1/85 A
1/85 A1/85 A
HauptprofilDP 33 L - 15 mmDP 08 L - 18 mmDP 09 L - 24 mm
QuerprofilDP 36 LG - 5 mmDP 35 LG - 10 mmDP 33 LG - 15 mmDP 08 LG - 18 mmDP 09 LG - 24 mm
Montage der Anschlußteile
in maßgenau vorgestanzte
und geschlitzte Querprofile
durch einfaches Einklipsen.
DP 36 - 5 mm DP 33 - 15 mmDP 08 - 18 mmDP 09 - 24 mm
DP 35 - 10 mm DP 33 - 15 mmDP 08 - 18 mmDP 09 - 24 mm
DP 08 - 5 mmDP 09 - 10 mm
Schnitt durch Konstruktion und Deckenplatte
118
Ideen für Akustik und Design
®
Staudigel
Profile und Zubehör für Konstruktionen 270, 273, 280
Meter Meter Meter DP 16 2106 � Trageprofil 68 32 640 0,75 4000 sendz. verzinkt 2107 � 68 16 320 0,75 2000
Stück Stück Stück 1/104 2804 � Längsverbinder 6,8 100 0,50 110 für Profil DP 16 sendz. verzinkt Stück Stück Stück WA 16 4503 � Wandanschluß- 3,3 100 1,00 50 schuh für Profil DP 16 sendz. verzinkt Stück Stück Stück KV 16 5213 � Kreuzverbinder 3,2 100 1,00 50 für Profil DP 16 send. verzinkt Stück Stück Stück 1/22 A 2609 � Kreuzschnellver- 6,5 100 6000 0,75 64,5 binder zur Verbindung von Profilen der Serie DP 16 sendz. verzinkt Stück Stück Stück Direktabhänger für Profile DP 16 und DP 17 sendz. verzinkt
1/29 A 5805 � Justierbereich 3,2 100 1,00 35 35 - 45 mm
1/29 B 5806 � Justierbereich 3,6 100 1,00 47 50 - 60 mm
1/29 C 5807 � Justierbereich 5,0 100 1,00 65 65 - 75 mm
1/29 D 5808 � Justierbereich 6,1 100 1,00 95 95 - 105 mm
Bestell-Nr. Kennziffer Bezeichnung und Oberflächenausführung
Sym
bole
Gew
icht
in k
gpe
r 10
0
Verp
acku
ngs-
einh
eit
Gro
ßbun
de
Mat
eria
lstä
rke
in m
m
Läng
e in
mm
� = ab Lager verfügbar
Ideen für Akustik und Design
®
Staudigel
Meter Meter Meter DP 59 5196 � Hutprofil 20 50 3000 0,60 5000 sendz. verzinkt
51949 � bandbeschichtet 20 50 3000 0,60 5000 reinweiß ähnlich RAL 9010
5195 � bandbeschichtet 20 50 3000 0,60 5000 schwarz ähnlich RAL 9011
(Schnittkanten haben keine Farbe) Stück Stück Stück 1/37 C-62 2670 � Noniushänger- 4,8 100 1,25 122 Unterteil sendz. verzinkt passend für Profil DP 16
1/14 Nonius-Sicherungs- klammer zum Verbinden von Nonius-Oberteil mit Nonius-Unterteil (je Abhängung 2 St.)
1/30 Noniushänger- Oberteil, durch- gehend gelocht sendz. verzinkt
2616 � 150 mm lang 2,5 100 1,00 150 2618 � 200 mm lang 3,5 100 1,00 200 2620 � 300 mm lang 5,4 100 1,00 300 2622 � 400 mm lang 7,1 100 1,00 400 2624 � 500 mm lang 9,2 100 1,00 500 2626 � 600 mm lang 11,2 100 1,00 600 2628 � 700 mm lang 12,5 100 1,00 700 2630 � 800 mm lang 15,4 100 1,00 800 2632 � 900 mm lang 17,5 100 1,00 900 2634 � 1000 mm lang 18,8 100 1,00 1000
Staudigel
Bestell-Nr. Kennziffer Bezeichnung und Oberflächenausführung
Sym
bole
Gew
icht
in k
gpe
r 10
0
Verp
acku
ngs-
einh
eit
Gro
ßbun
de
Mat
eria
lstä
rke
in m
m
Läng
e in
mm
� = ab Lager verfügbar
119
Ideen für Akustik und Design
®
Staudigel
Profile und Zubehör für Konstruktionen 270, 273, 280
Meter Meter Meter DP 16 2106 � Trageprofil 68 32 640 0,75 4000 sendz. verzinkt 2107 � 68 16 320 0,75 2000
Stück Stück Stück 1/104 2804 � Längsverbinder 6,8 100 0,50 110 für Profil DP 16 sendz. verzinkt Stück Stück Stück WA 16 4503 � Wandanschluß- 3,3 100 1,00 50 schuh für Profil DP 16 sendz. verzinkt Stück Stück Stück KV 16 5213 � Kreuzverbinder 3,2 100 1,00 50 für Profil DP 16 send. verzinkt Stück Stück Stück 1/22 A 2609 � Kreuzschnellver- 6,5 100 6000 0,75 64,5 binder zur Verbindung von Profilen der Serie DP 16 sendz. verzinkt Stück Stück Stück Direktabhänger für Profile DP 16 und DP 17 sendz. verzinkt
1/29 A 5805 � Justierbereich 3,2 100 1,00 35 35 - 45 mm
1/29 B 5806 � Justierbereich 3,6 100 1,00 47 50 - 60 mm
1/29 C 5807 � Justierbereich 5,0 100 1,00 65 65 - 75 mm
1/29 D 5808 � Justierbereich 6,1 100 1,00 95 95 - 105 mm
Bestell-Nr. Kennziffer Bezeichnung und Oberflächenausführung
Sym
bole
Gew
icht
in k
gpe
r 10
0
Verp
acku
ngs-
einh
eit
Gro
ßbun
de
Mat
eria
lstä
rke
in m
m
Läng
e in
mm
� = ab Lager verfügbar
Ideen für Akustik und Design
®
Staudigel
Meter Meter Meter DP 59 5196 � Hutprofil 20 50 3000 0,60 5000 sendz. verzinkt
51949 � bandbeschichtet 20 50 3000 0,60 5000 reinweiß ähnlich RAL 9010
5195 � bandbeschichtet 20 50 3000 0,60 5000 schwarz ähnlich RAL 9011
(Schnittkanten haben keine Farbe) Stück Stück Stück 1/37 C-62 2670 � Noniushänger- 4,8 100 1,25 122 Unterteil sendz. verzinkt passend für Profil DP 16
1/14 Nonius-Sicherungs- klammer zum Verbinden von Nonius-Oberteil mit Nonius-Unterteil (je Abhängung 2 St.)
1/30 Noniushänger- Oberteil, durch- gehend gelocht sendz. verzinkt
2616 � 150 mm lang 2,5 100 1,00 150 2618 � 200 mm lang 3,5 100 1,00 200 2620 � 300 mm lang 5,4 100 1,00 300 2622 � 400 mm lang 7,1 100 1,00 400 2624 � 500 mm lang 9,2 100 1,00 500 2626 � 600 mm lang 11,2 100 1,00 600 2628 � 700 mm lang 12,5 100 1,00 700 2630 � 800 mm lang 15,4 100 1,00 800 2632 � 900 mm lang 17,5 100 1,00 900 2634 � 1000 mm lang 18,8 100 1,00 1000
Staudigel
Bestell-Nr. Kennziffer Bezeichnung und Oberflächenausführung
Sym
bole
Gew
icht
in k
gpe
r 10
0
Verp
acku
ngs-
einh
eit
Gro
ßbun
de
Mat
eria
lstä
rke
in m
m
Läng
e in
mm
� = ab Lager verfügbar
120
Ideen für Akustik und Design
®
Staudigel
Stück Stück Stück 1/32 Noniushänger- Oberteil, durch- gehend gelocht sendz. verzinkt 2611 � 70 mm lang 1,2 100 1,00 70 2614 � 100 mm lang 1,7 100 1,00 100 2615 � 120 mm lang 2,1 100 1,00 120
Stück Stück Stück 1/37 L 2690 � Noniushänger- 0,6 100 1,25 185 Unterteil für T-Profile der Serie DP 08/ DP 09/ DP 33/DP 35 sendz. verzinkt
1/37 L-205 2689 � für Profil DP 205 0,6 100 1,25 185 2/421 Befestigungsschraube mit Selbstbohrspitze
verzinkt 3730 � 3,5 x 9,5 mm 0,12 1000 3,50 9,5 3732 � 3,5 x 16 mm 0,15 1000 3,50 16 3734 � 3,5 x 25 mm 0,27 1000 3,50 25
schwarz verzinkt 3735 � 3,5 x 16 mm 0,15 1000 3,50 16
Staudigel
Bestell-Nr. Kennziffer Bezeichnung und Oberflächenausführung
Sym
bole
Gew
icht
in k
gpe
r 10
0
Verp
acku
ngs-
einh
eit
Gro
ßbun
de
Mat
eria
lstä
rke
in m
m
Läng
e in
mm
� = ab Lager verfügbar
121
Staudigel
®
Ideen für Akustik und Design
New DevelopmentSupport for Planners and Builders .......................................... 1
Instructions for Installation, Technical Data ............................. 2
Information on the Sound Absorption System ......................... 3
Detailed Drawings of Hole Face Pattern .................................. 4
Detailed Drawings of Slat Face Pattern .................................... 5
Detailed Drawings of Tongue-and-Groove Slat Panel ............... 6
Detailed Drawings of Furniture Doorsets ................................. 7
Complete Solutions for Mobile and Permanent Partition Walls ....................................................... 8
Mounting Types ...................................................................... 9
General Terms and Conditions ............................................ 10
123
Staudigel
®
Ideen für Akustik und Design
Our Alpha Akustik sound absorption panels are protected as a German patent (DE 102 48 072) and as a European patent (EP 1 EP 1 411 179)!
Unless express prior consent has been granted, these documents and samples must not be handed on and/or copied, and their content must not be used or disclosed to third parties, in particular the competitors of Staudigel GmbH. In case of violation of this regulation, Staudigel GmbH reserves the right of access to information and the right to claim injunctive relief and compensation.In case of the present or future existence of an intellectual property right, all rights are reserved.
®
Ideen für Akustik und Design
Staudigel
General Terms and Conditions
I. Scope:
1. Our delivery obligation is exclusively defined by the order confirmation in writing. Any ancillary agreements and modifications must be confirmed by us in writing.2. The customer’s purchasing terms are not binding for us.3. For interior fitting work, the regulations of VOB/B (German construction contract procedures) apply in addition.
II. Prices and terms of payment:
1. The prices are understood ex works Veitshöchheim.2. The payment is due 30 days after date of invoice. If cash discount has been agreed upon, the payment is due within 10 days after date of invoice.3. If bills of exchange are accepted, bank discount charges and collection fees will become payable from the date the invoice is due.4. International business transactions are made on a cash against documents basis and are subject to German law. The customer shall open an irrevocable letter of credit.5. The customer cannot terminate the contract unless we agree to such termination. In case of termination, we are entitled to demand payment of the agreed remuneration less any expenses saved, but no less than 20% of the agreed price. The burden of proof of smaller damage lies with the customer.
III. Period of delivery:
1. If delivery is delayed for reasons attributable to us, the customer may withdraw from the contract after expiry of a reasonable grace period of no less than 6 weeks, to be determined by the customer.
IV. Liability in tort
1. Claims in tort are excluded, unless the damage was caused deliberately or by gross negligence. This applies also to our assistants and vicarious agents.
V. Warranty
1. Any defects must be claimed before use or commingling of the goods supplied by us. Justified complaints shall be asserted immediately in writing. Any substantiated defects in the delivery item attributable to defects in material or workmanship shall be remedied by us within the 6 months warranty period by reworking or, at our discretion, by replacement delivery against return of the defective delivery item. Should reworking or replacement delivery be impossible, the customer has the right to withdraw from the contract after expiry of a reasonable grace period.2. In respect of further claims and rights, we take liability only in case of intent and gross negligence. All other liability is excluded.
VI. Retention of title
1. We reserve title in all delivered goods until fulfillment of all payment obligations.2. The customer has the right to sell, commingle and/or process the goods in the frame of its regular and usual business transactions. Retention of title remains effective in case of commingling and/or processing and applies prorata to the newly created item. In case of resale, that part of the customer’s claim against its buyers that corresponds to the resale value of the goods subject to retention of title is considered assigned with precedence over the rest until complete settlement by the customer of all our claims.
VII. Place of performance and legal venue:
1. Place of performance is Veitshöchheim.2. Provided the ordering party is a registered merchant, legal venue is Würzburg.
Should a clause be or become invalid, the validity of the other clauses remains unaffected.
STAUDIGEL GMBH, 97209 Veitshöchheim, version as of 10/2002
Ideen für Akustik und Design von
IHK, Potsdam
Verwaltung Sparkasse Mainfranken,Würzburg
Staudigel GmbH · MöbelserienteileBenzstraße 8 · 97209 VeitshöchheimTel. 0931/ 9 70 54-0 · Fax 0931/ 9 70 54-54E-Mail: [email protected] · www.alpha-akustik.deStand: Mai 2010